diff mbox series

[V3,2/3] test_plans/vhost_user_interrupt_cbdma_test_plan: add new testplan

Message ID 20221122065242.2894075-1-weix.ling@intel.com (mailing list archive)
State Accepted
Headers
Series add vhost_user_interrupt_cbdma |

Commit Message

Ling, WeiX Nov. 22, 2022, 6:52 a.m. UTC 
  Add new vhost_user_interrupt_cbdma testplan to test the virtio 
enqueue and dequeue use l3fwd-power with split ring and packed
ring path and CBDMA.

Signed-off-by: Wei Ling <weix.ling@intel.com>
---
 .../vhost_user_interrupt_cbdma_test_plan.rst  | 84 +++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 test_plans/vhost_user_interrupt_cbdma_test_plan.rst
diff mbox series

Patch

diff --git a/test_plans/vhost_user_interrupt_cbdma_test_plan.rst b/test_plans/vhost_user_interrupt_cbdma_test_plan.rst
new file mode 100644
index 00000000..3eab4797
--- /dev/null
+++ b/test_plans/vhost_user_interrupt_cbdma_test_plan.rst
@@ -0,0 +1,84 @@ 
+.. SPDX-License-Identifier: BSD-3-Clause
+   Copyright(c) 2022 Intel Corporation
+
+==============================================
+vhost-user interrupt mode with CBDMA test plan
+==============================================
+
+Description
+===========
+
+Vhost-user interrupt need test with l3fwd-power sample with CBDMA channel, 
+small packets send from virtio-user to vhost side, check vhost-user cores 
+can be wakeup，and vhost-user cores should be back to sleep after stop 
+sending packets from virtio side.
+
+.. note::
+
+   1.For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > 5.1, and packed ring multi-queues not support reconnect in qemu yet.
+   2.For split virtqueue virtio-net with multi-queues server mode test, better to use qemu version >= 5.2.0, dut to qemu(v4.2.0~v5.1.0) exist split ring multi-queues reconnection issue.
+   3.Kernel version > 4.8.0, mostly linux distribution don't support vfio-noiommu mode by default,
+   so testing this case need rebuild kernel to enable vfio-noiommu.
+   4.When DMA devices are bound to vfio driver, VA mode is the default and recommended. For PA mode, page by page mapping may exceed IOMMU's max capability, better to use 1G guest hugepage.
+   5.DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd.
+
+Prerequisites
+=============
+Topology
+--------
+Test flow: Virtio-user --> Vhost-user
+
+General set up
+--------------
+1. Compile DPDK::
+
+    # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static <dpdk build dir>
+    # ninja -C <dpdk build dir> -j 110
+    For example:
+    CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static x86_64-native-linuxapp-gcc
+    ninja -C x86_64-native-linuxapp-gcc -j 110
+
+Test case
+=========
+
+Test Case 1: Wake up split ring vhost-user cores with l3fwd-power sample when multi queues and cbdma are enabled
+----------------------------------------------------------------------------------------------------------------
+
+1. Launch virtio-user with server mode::
+
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4 -- -i --rxq=4 --txq=4 --rss-ip
+
+2. Bind 4 cbdma ports to vfio-pci driver, then launch l3fwd-power with a virtual vhost device::
+
+    ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -l 9-12 -n 4 --log-level=9 \
+    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;rxq0@0000:80:04.0;rxq1@0000:80:04.1;rxq2@0000:80:04.2;rxq3@0000:80:04.3]' -- -p 0x1 --parse-ptype 1 \
+    --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
+
+3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup status::
+
+    testpmd>set fwd txonly
+    testpmd>start
+
+4. Stop and restart testpmd again, check vhost-user cores will sleep and wakeup again.
+
+Test Case 2: Wake up packed ring vhost-user cores with l3fwd-power sample when multi queues and cbdma are enabled
+-----------------------------------------------------------------------------------------------------------------
+
+1. Launch virtio-user with server mode::
+
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4,packed_vq=1 -- -i --rxq=4 --txq=4 --rss-ip
+
+2. Bind 4 cbdma ports to vfio-pci driver, then launch l3fwd-power with a virtual vhost device::
+
+    ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -l 9-12 -n 4 --log-level=9 \
+    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;rxq0@0000:80:04.0;rxq1@0000:80:04.1;rxq2@0000:80:04.2;rxq3@0000:80:04.3]' -- -p 0x1 --parse-ptype 1 \
+    --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
+
+3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup status::
+
+    testpmd>set fwd txonly
+    testpmd>start
+
+4. Stop and restart testpmd again, check vhost-user cores will sleep and wakeup again.