diff mbox series

[V1,1/1] test_plans/basic_4k_pages_dsa_test_plan: modify test plan to test vhost async dequeue

Message ID 20220906112121.1136166-2-xingguang.he@intel.com (mailing list archive)
State Accepted
Headers show
Series modify test plan to test vhost async | expand

Checks

Context Check Description
ci/Intel-dts-suite-test warning SKIPPED
ci/Intel-dts-doc-test success Testing OK
ci/Intel-dts-pylama-test success Testing OK
ci/Intel-dts-format-test success Testing OK

Commit Message

He, Xingguang Sept. 6, 2022, 11:21 a.m. UTC
From DPDK-22.07, vhost async dequeue is supported in both split and
packed ring, so modify basic_4k_pages_dsa_test_plan to test vhost async
dequeue feature.

Signed-off-by: Xingguang He <xingguang.he@intel.com>
---
 test_plans/basic_4k_pages_dsa_test_plan.rst | 788 ++++++++------------
 1 file changed, 296 insertions(+), 492 deletions(-)

Comments

Tu, Lijuan Oct. 9, 2022, 10:12 a.m. UTC | #1
On Tue,  6 Sep 2022 11:21:21 +0000, Xingguang He <xingguang.he@intel.com> wrote:
> From DPDK-22.07, vhost async dequeue is supported in both split and
> packed ring, so modify basic_4k_pages_dsa_test_plan to test vhost async
> dequeue feature.
> 
> Signed-off-by: Xingguang He <xingguang.he@intel.com>


Applied, thanks
diff mbox series

Patch

diff --git a/test_plans/basic_4k_pages_dsa_test_plan.rst b/test_plans/basic_4k_pages_dsa_test_plan.rst
index 9c85f8ef..69cf7fc1 100644
--- a/test_plans/basic_4k_pages_dsa_test_plan.rst
+++ b/test_plans/basic_4k_pages_dsa_test_plan.rst
@@ -1,35 +1,30 @@ 
 .. SPDX-License-Identifier: BSD-3-Clause
    Copyright(c) 2022 Intel Corporation
 
-===============================================================
-vhost async operation with DSA driver using 4K-pages test plan
-===============================================================
+=============================================
+Basic 4k-pages test with DSA driver test plan
+==============================================
 
 Description
 ===========
 
-Vhost asynchronous data path leverages DMA devices to offload memory copies from the CPU and it is implemented in an asynchronous way.
-In addition, vhost supports M:N mapping between vrings and DMA virtual channels. Specifically, one vring can use multiple different DMA
-channels and one DMA channel can be shared by multiple vrings at the same time. Vhost enqueue operation with CBDMA channels is supported
-in both split and packed ring.
+DPDK 19.02 add support for using virtio-user without hugepages. The --no-huge mode was augmented to use memfd-backed
+memory (on systems that support memfd), to allow using virtio-user-based NICs without hugepages.
 
 This document provides the test plan for testing some basic functions when Vhost-user using asynchronous data path with
 DSA driver (kernel IDXD driver and DPDK vfio-pci driver) and using 4K-pages memory environment.
-1. test Vhost asynchronous data path with DSA driver in the PVP topology environment with testpmd.
-2. check Vhost tx offload function by verifing the TSO/cksum in the TCP/IP stack with vm2vm split ring and packed ring 
+1. Test Vhost asynchronous data path with DSA driver in the PVP topology environment with testpmd.
+2. Check Vhost tx offload function by verifing the TSO/cksum in the TCP/IP stack with vm2vm split ring and packed ring
 vhost-user/virtio-net mergeable path.
 3.Check the payload of large packet (larger than 1MB) is valid after forwarding packets with vm2vm split ring
 and packed ring vhost-user/virtio-net mergeable and non-mergeable path.
 4. Multi-queues number dynamic change in vm2vm vhost-user/virtio-net with split ring and packed ring.
 5. Vhost-user using 1G hugepges and virtio-user using 4k-pages.
 
-DPDK 19.02 add support for using virtio-user without hugepages. The --no-huge mode was augmented to use memfd-backed
-memory (on systems that support memfd), to allow using virtio-user-based NICs without hugepages.
-
 Note:
 1. When DMA devices are bound to vfio driver, VA mode is the default and recommended. For PA mode, page by page mapping may
 exceed IOMMU's max capability, better to use 1G guest hugepage.
-2. DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd, and the suite has not yet been automated.
+2. DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd.
 
 Prerequisites
 =============
@@ -40,19 +35,19 @@  General set up
 
 2. Compile DPDK::
 
-	# CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=<dpdk build dir>
+	# CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static <dpdk build dir>
 	# ninja -C <dpdk build dir> -j 110
 	For example,
-	CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=x86_64-native-linuxapp-gcc
+	CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static x86_64-native-linuxapp-gcc
 	ninja -C x86_64-native-linuxapp-gcc -j 110
 
-3. Get the PCI device ID and DSA device ID of DUT, for example, 0000:4f:00.1 is PCI device ID, 0000:6a:01.0 - 0000:f6:01.0 are DSA device IDs::
+3. Get the PCI device ID and DSA device ID of DUT, for example, 0000:6a:00.0 is PCI device ID, 0000:6a:01.0 - 0000:f6:01.0 are DSA device IDs::
 
 	<dpdk dir># ./usertools/dpdk-devbind.py -s
 
 	Network devices using kernel driver
 	===================================
-	0000:4f:00.1 'Ethernet Controller E810-C for QSFP 1592' drv=ice unused=vfio-pci
+	0000:6a:00.0 'Ethernet Controller E810-C for QSFP 1592' drv=ice unused=vfio-pci
 
 	4DMA devices using kernel driver
 	4===============================
@@ -99,12 +94,12 @@  Common steps
 3. Bind DSA devices to kernel idxd driver, and configure Work Queue (WQ)::
 
 	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd <numDevices * 2>
-	<dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q <numWq>
+	<dpdk dir># ./drivers/dma/dma/idxd/dpdk_idxd_cfg.py -q <numWq>
 
 .. note::
 
 	Better to reset WQ when need operate DSA devices that bound to idxd drvier:
-	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py --reset <numDevices * 2>
+	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py --reset <numDevices>
 	You can check it by 'ls /dev/dsa'
 	numDevices: number of devices, where 0<=numDevices<=7, corresponding to 0000:6a:01.0 - 0000:f6:01.0
 	numWq: Number of workqueues per DSA endpoint, where 1<=numWq<=8
@@ -112,76 +107,25 @@  Common steps
 	For example, bind 2 DMA devices to idxd driver and configure WQ:
 
 	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
-	<dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0
-	<dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 2
-	Check WQ by 'ls /dev/dsa' and can find "wq0.0 wq2.0 wq2.1 wq2.2 wq2.3"
-
-Test Case 1: Basic test vhost/virtio-user split ring with 4K-pages and dsa dpdk driver
-----------------------------------------------------------------------------------------
-This case uses testpmd and Traffic Generator(For example, Trex) to test split ring when vhost uses the asynchronous 
-enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is 1:1 in 4k-pages environment.
-
-1. Bind one dsa device(6a:01.0) and one nic port(4f:00.1) to vfio-pci like common step 1-2.
-
-2. Launch vhost::
-
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=1 \
-	--vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@0000:6a:01.0-q0]
-	testpmd>set fwd mac
-	testpmd>start
-
-3. Launch virtio-user with 4K-pages::
-
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \
-	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,queues=1 -- -i
-	testpmd>set fwd mac
-	testpmd>start
-
-4. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::
-
-	testpmd>show port stats all
-
-Test Case 2: Basic test vhost/virtio-user packed ring with 4K-pages and dsa dpdk driver
-----------------------------------------------------------------------------------------
-This case uses testpmd and Traffic Generator(For example, Trex) to test packed ring when vhost uses the asynchronous 
-enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is 1:1 in 4k-pages environment.
-
-1. Bind one dsa device(6a:01.0) and one nic port(4f:00.1) to vfio-pci like common step 1-2.
-
-2. Launch vhost::
-
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=4 \
-	--vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@0000:6a:01.0-q0]
-	testpmd>set fwd mac
-	testpmd>start
-
-3. Launch virtio-user with 4K-pages::
-
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \
-	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,packed_vq=1,queues=1 -- -i
-	testpmd>set fwd mac
-	testpmd>start
-
-4. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::
+	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0
+	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 1
+	Check WQ by 'ls /dev/dsa' and can find "wq0.0 wq1.0 wq1.1 wq1.2 wq1.3"
 
-	testpmd>show port stats all
-
-Test Case 3: PVP split ring multi-queues with 4K-pages and dsa dpdk driver
------------------------------------------------------------------------------
-This case uses testpmd and Traffic Generator(For example, Trex) to test split ring multi-queues when vhost uses the asynchronous 
-enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is M:N in 4k-pages environment.
+Test Case 1: PVP split ring multi-queues with 4K-pages and dsa dpdk driver
+------------------------------------------------------------------------------
+This case tests split ring with multi-queues can work normally in 4k-pages environment when vhost uses the asynchronous operations with dsa dpdk driver.
 
-1. Bind 8 dsa device and one nic port to vfio-pci like common step 1-2::
+1. Bind 2 dsa device and one nic port to vfio-pci like common step 1-2::
 
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:00.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0
 
 2. Launch vhost by below command::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --no-huge -m 1024 -a 0000:4f:00.1 -a 0000:6a:01.0 \
-	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \
-	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \
-	--lcore-dma=[lcore11@0000:6a:01.0-q0,lcore11@0000:6a:01.0-q7,lcore12@0000:6a:01.0-q1,lcore12@0000:6a:01.0-q2,lcore12@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q2,lcore13@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q2,lcore14@0000:6a:01.0-q3,lcore14@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q0,lcore15@0000:6a:01.0-q1,lcore15@0000:6a:01.0-q2,lcore15@0000:6a:01.0-q3,lcore15@0000:6a:01.0-q4,lcore15@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q6,lcore15@0000:6a:01.0-q7]
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --no-huge -m 1024 -a 0000:6a:00.0 -a 0000:e7:01.0 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \
+	--lcore-dma=[lcore11@0000:e7:01.0-q0,lcore11@0000:e7:01.0-q1,lcore12@0000:e7:01.0-q2,lcore12@0000:e7:01.0-q3,lcore13@0000:e7:01.0-q4,lcore13@0000:e7:01.0-q5,lcore14@0000:e7:01.0-q6,lcore14@0000:e7:01.0-q7]
 	testpmd>set fwd mac
 	testpmd>start
 
@@ -190,10 +134,10 @@  enqueue operations with dsa dpdk driver and the mapping between vrings and dsa v
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \
 	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8,server=1 \
 	-- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
-	testpmd>set fwd mac
+	testpmd>set fwd csum
 	testpmd>start
 
-4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+4. Send tcp imix packets [64,1518] from packet generator, check the throughput can get expected data::
 
 	testpmd>show port stats all
 
@@ -201,38 +145,47 @@  enqueue operations with dsa dpdk driver and the mapping between vrings and dsa v
 
 	testpmd>stop
 
-6. restart vhost port and send imix pkts again, check get same throuhput as above::
+6. Restart vhost port and send imix packets again, check the throughput can get expected data::
 
 	testpmd>start
 	testpmd>show port stats all
 
-7. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels with 1G hugepage::
+7. Quit and relaunch vhost with 1G hugepage::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 \
-	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
-	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
-	--lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6a:01.0-q0,lcore13@0000:6f:01.0-q1,lcore13@0000:74:01.0-q2,lcore14@0000:6f:01.0-q1,lcore14@0000:74:01.0-q2,lcore15@0000:6f:01.0-q1,lcore15@0000:74:01.0-q2]
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:6a:00.0 -a 0000:e7:01.0,max_queues=4 -a 0000:ec:01.0,max_queues=4 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+	--lcore-dma=[lcore11@0000:e7:01.0-q0,lcore11@0000:e7:01.0-q1,lcore12@0000:e7:01.0-q2,lcore12@0000:e7:01.0-q3,lcore13@0000:ec:01.0-q0,lcore13@0000:ec:01.0-q1,lcore14@0000:ec:01.0-q2,lcore14@0000:ec:01.0-q3]
 	testpmd>set fwd mac
 	testpmd>start
 
-8. Rerun step 3-5.
+8. Rerun step 4-6.
+
+9. Quit and relaunch virtio-user with mergeable path::
 
-Test Case 4: PVP packed ring multi-queues with 4K-pages and dsa dpdk driver
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,queues=8,server=1 \
+	-- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+	testpmd>set fwd csum
+	testpmd>start
+
+10. Rerun step 4-6.
+
+Test Case 2: PVP packed ring multi-queues with 4K-pages and dsa dpdk driver
 ------------------------------------------------------------------------------
-This case uses testpmd and Traffic Generator(For example, Trex) to test packed ring multi-queues when vhost uses the asynchronous 
-enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is M:N in 4k-pages environment.
+This case tests packed ring with multi-queues can work normally in 4k-pages environment when vhost uses the asynchronous operations with dsa dpdk driver.
 
-1. Bind 8 dsa device and one nic port to vfio-pci like common step 1-2::
+1. Bind 2 dsa device and one nic port to vfio-pci like common step 1-2::
 
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:00.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci f1:01.0 f6:01.0
 
 2. Launch vhost by below command::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --no-huge -m 1024 -a 0000:4f:00.1 -a 0000:6a:01.0 \
-	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \
-	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \
-	--lcore-dma=[lcore11@0000:6a:01.0-q0,lcore11@0000:6a:01.0-q7,lcore12@0000:6a:01.0-q1,lcore12@0000:6a:01.0-q2,lcore12@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q2,lcore13@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q2,lcore14@0000:6a:01.0-q3,lcore14@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q0,lcore15@0000:6a:01.0-q1,lcore15@0000:6a:01.0-q2,lcore15@0000:6a:01.0-q3,lcore15@0000:6a:01.0-q4,lcore15@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q6,lcore15@0000:6a:01.0-q7]
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --no-huge -m 1024 -a 0000:6a:00.0 -a 0000:f1:01.0 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \
+	--lcore-dma=[lcore11@0000:f1:01.0-q0,lcore11@0000:f1:01.0-q1,lcore12@0000:f1:01.0-q2,lcore12@0000:f1:01.0-q3,lcore13@0000:f1:01.0-q4,lcore13@0000:f1:01.0-q5,lcore14@0000:f1:01.0-q6,lcore14@0000:f1:01.0-q7]
 	testpmd>set fwd mac
 	testpmd>start
 
@@ -244,7 +197,7 @@  enqueue operations with dsa dpdk driver and the mapping between vrings and dsa v
 	testpmd>set fwd mac
 	testpmd>start
 
-4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+4. Send tcp imix packets [64,1518] from packet generator, check the throughput can get expected data::
 
 	testpmd>show port stats all
 
@@ -252,45 +205,53 @@  enqueue operations with dsa dpdk driver and the mapping between vrings and dsa v
 
 	testpmd>stop
 
-6. restart vhost port and send imix pkts again, check get same throuhput as above::
+6. restart vhost port and send imix packets again, check get same throuhput as above::
 
 	testpmd>start
 	testpmd>show port stats all
 
-7. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels with 1G hugepage::::
+7. Quit and relaunch vhost with with 1G hugepage::::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:6a:00.0 -a 0000:f1:01.0,max_queues=4 -a 0000:f6:01.0,max_queues=4 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+	--lcore-dma=[lcore11@0000:f1:01.0-q0,lcore11@0000:f1:01.0-q1,lcore12@0000:f1:01.0-q2,lcore12@0000:f1:01.0-q3,lcore13@0000:f6:01.0-q0,lcore13@0000:f6:01.0-q1,lcore14@0000:f6:01.0-q2,lcore14@0000:f6:01.0-q3]
+	testpmd>set fwd mac
+	testpmd>start
+
+8. Rerun step 4-6.
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 \
-	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
-	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
-	--lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6a:01.0-q0,lcore13@0000:6f:01.0-q1,lcore13@0000:74:01.0-q2,lcore14@0000:6f:01.0-q1,lcore14@0000:74:01.0-q2,lcore15@0000:6f:01.0-q1,lcore15@0000:74:01.0-q2]
+9. Quit and relaunch virtio-user with mergeable path::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=0,packed_vq=1,queues=8,server=1 \
+	-- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
 	testpmd>set fwd mac
 	testpmd>start
 
-8. Rerun step 3-5.
+10.Rerun step 4-6.
 
-Test Case 5: VM2VM split ring vhost-user/virtio-net 4K-pages and dsa dpdk driver test with tcp traffic
+Test Case 3: VM2VM split ring vhost-user/virtio-net 4K-pages and dsa dpdk driver test with tcp traffic
 --------------------------------------------------------------------------------------------------------
-This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net split ring mergeable path 
-by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver 
-in 4k-pages environment.
+This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net split ring mergeable path by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous operations with dsa dpdk driver in 4k-pages environment.
 
 1. Bind 1 dsa device to vfio-pci like common step 2::
 
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci f1:01.0
 
 2. Launch vhost by below command::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:6a:01.0,max_queues=2 \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0],dma_ring_size=2048' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0],dma_ring_size=2048' \
-	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --no-numa --socket-num=0 --lcore-dma=[lcore3@0000:6a:01.0-q0,lcore4@0000:6a:01.0-q1]
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:f1:01.0,max_queues=2 \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0;rxq0]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0;rxq0]' \
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --no-numa --socket-num=0 --lcore-dma=[lcore3@0000:f1:01.0-q0,lcore4@0000:f1:01.0-q1]
 	testpmd>start
 
 3. Launch VM1 and VM2::
 
-	taskset -c 32 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+	taskset -c 10 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img  \
 	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
 	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
 	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -299,9 +260,9 @@  in 4k-pages environment.
 	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
 	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
 
-	taskset -c 33 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+	taskset -c 11 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img  \
 	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
 	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
 	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -325,33 +286,32 @@  in 4k-pages environment.
 	<VM1># iperf -s -i 1
 	<VM2># iperf -c 1.1.1.2 -i 1 -t 60
 
-6. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1522, Port 1 should have rx packets above 1522::
+6. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1519, Port 1 should have rx packets above 1519::
 
 	testpmd>show port xstats all
 
-Test Case 6: VM2VM packed ring vhost-user/virtio-net 4K-pages and dsa dpdk driver test with tcp traffic
+Test Case 4: VM2VM packed ring vhost-user/virtio-net 4K-pages and dsa dpdk driver test with tcp traffic
 ---------------------------------------------------------------------------------------------------------
 This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net packed ring mergeable path 
-by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver 
-in 4k-pages environment.
+by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous operations with dsa dpdk driver in 4k-pages environment.
 
 1. Bind 1 dsa device to vfio-pci like common step 2::
 
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci f1:01.0
  
 2. Launch vhost by below command::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:6a:01.0 \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0],dma_ring_size=2048' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0],dma_ring_size=2048' \
-	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --no-numa --socket-num=0 --lcore-dma=[lcore3@0000:6a:01.0-q0,lcore4@0000:6a:01.0-q1]
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:f1:01.0,max_queues=2 \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0;rxq0]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0;rxq0]' \
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --no-numa --socket-num=0 --lcore-dma=[lcore3@0000:f1:01.0-q0,lcore4@0000:f1:01.0-q1]
 	testpmd>start
 
 3. Launch VM1 and VM2::
 
-	taskset -c 32 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+	taskset -c 32 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img  \
 	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
 	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
 	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -360,9 +320,9 @@  in 4k-pages environment.
 	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
 	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
 
-	taskset -c 33 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+	taskset -c 33 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img  \
 	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
 	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
 	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -390,30 +350,30 @@  in 4k-pages environment.
 
 	testpmd>show port xstats all
 
-Test Case 7: vm2vm vhost/virtio-net split packed ring multi queues with 1G/4k-pages and dsa dpdk driver
+Test Case 5: VM2VM vhost/virtio-net split packed ring multi queues with 1G/4k-pages and dsa dpdk driver
 ---------------------------------------------------------------------------------------------------------
 This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in 
-vm2vm vhost-user/virtio-net multi-queues mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk driver.
+vm2vm vhost-user/virtio-net multi-queues mergeable path when vhost uses the asynchronous operations with dsa dpdk driver.
 And one virtio-net is split ring, the other is packed ring. The vhost run in 1G hugepages and the virtio-user run in 4k-pages environment.
 
 1. Bind 2 dsa channel to vfio-pci like common step 2::
 
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci f1:01.0 f6:01.0
 
 2. Launch vhost::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq1;txq2;txq3;txq4;txq5;txq6]' \
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=4 -a 0000:f6:01.0,max_queues=4 \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
 	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
-	--lcore-dma=[lcore2@0000:6a:01.0-q0,lcore2@0000:6f:01.0-q1,lcore2@0000:74:01.0-q2,lcore2@0000:79:01.0-q3,lcore3@0000:6a:01.0-q0,lcore3@0000:74:01.0-q2,lcore3@0000:e7:01.0-q4,lcore3@0000:ec:01.0-q5,lcore3@0000:f1:01.0-q6,lcore3@0000:f6:01.0-q7,lcore4@0000:6f:01.0-q1,lcore4@0000:79:01.0-q3,lcore4@0000:6a:01.0-q1,lcore4@0000:6f:01.0-q2,lcore4@0000:74:01.0-q3,lcore4@0000:79:01.0-q4,lcore4@0000:e7:01.0-q5,lcore4@0000:ec:01.0-q6,lcore4@0000:f1:01.0-q7,lcore5@0000:f6:01.0-q0]
+	--lcore-dma=[lcore2@0000:f1:01.0-q0,lcore2@0000:f1:01.0-q1,lcore3@0000:f1:01.0-q2,lcore3@0000:f1:01.0-q3,lcore4@0000:f6:01.0-q0,lcore4@0000:f6:01.0-q1,lcore5@0000:f6:01.0-q2,lcore3@0000:f6:01.0-q3]
 	testpmd>start
 
 3. Launch VM qemu::
 
-	taskset -c 32 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+	taskset -c 10 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img  \
 	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
 	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
 	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -422,9 +382,9 @@  And one virtio-net is split ring, the other is packed ring. The vhost run in 1G
 	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
 	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
 
-	taskset -c 33 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+	taskset -c 11 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img  \
 	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
 	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
 	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -454,100 +414,119 @@  And one virtio-net is split ring, the other is packed ring. The vhost run in 1G
 	<VM1># iperf -s -i 1
 	<VM2># iperf -c 1.1.1.2 -i 1 -t 60
 
-Test Case 8: Basic test vhost/virtio-user split ring with 4K-pages and dsa kernel driver
-----------------------------------------------------------------------------------------
-This case uses testpmd and Traffic Generator(For example, Trex) to test split ring when vhost uses the asynchronous 
-enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is 1:1 in 4k-pages environment.
+8. Relaunch vm1 and rerun step 4-7.
 
-1. Bind one nic port to vfio-pci and one dsa device to idxd like common step 1 and 3::
+Test Case 6: VM2VM vhost/virtio-net split ring multi queues with 1G/4k-pages and dsa dpdk driver
+---------------------------------------------------------------------------------------------------
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
+vm2vm vhost-user/virtio-net split ring mergeable path when vhost uses the asynchronous operations with
+dsa dpdk driver. The vhost run in 1G hugepages and the virtio-user run in 4k-pages environment.
 
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+1. Bind 2 dsa channel to vfio-pci, launch vhost::
 
-	#ls /dev/dsa,check wq configure, reset if exist
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py --reset 0
+	ls /dev/dsa #check wq configure, reset if exist
+	./usertools/dpdk-devbind.py -u f1:01.0 f1:01.0
+	./usertools/dpdk-devbind.py -b vfio-pci f1:01.0 f1:01.0
 
-	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
-	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
-	ls /dev/dsa #check wq configure success
+	./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=4 -a 0000:f6:01.0,max_queues=4 \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,client=1,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,client=1,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
+	--lcore-dma=[lcore2@0000:f1:01.0-q0,lcore2@0000:f1:01.0-q1,lcore3@0000:f1:01.0-q2,lcore3@0000:f1:01.0-q3,lcore4@0000:f6:01.0-q0,lcore4@0000:f6:01.0-q1,lcore5@0000:f6:01.0-q2,lcore5@0000:f6:01.0-q3]
+	testpmd>start
 
-2. Launch vhost::
+2. Prepare tmpfs with 4K-pages::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:4f:00.1 \
-	--vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@wq0.0]
-	testpmd>start
+	mkdir /mnt/tmpfs_4k
+	mkdir /mnt/tmpfs_4k_2
+	mount tmpfs /mnt/tmpfs_4k -t tmpfs -o size=4G
+	mount tmpfs /mnt/tmpfs_4k_2 -t tmpfs -o size=4G
 
-3. Launch virtio-user with 4K-pages::
+3. Launch VM qemu::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \
-	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,queues=1 -- -i
-	testpmd>start
+	taskset -c 32 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img  \
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+	-chardev socket,id=char0,path=./vhost-net0,server \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
 
-4. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::
+	taskset -c 33 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img  \
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+	-chardev socket,id=char0,path=./vhost-net1,server \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
 
-	testpmd>show port stats all
+4. On VM1, set virtio device IP and run arp protocal::
 
-Test Case 9: Basic test vhost/virtio-user packed ring with 4K-pages and dsa dpdk driver
-----------------------------------------------------------------------------------------
-This case uses testpmd and Traffic Generator(For example, Trex) to test packed ring when vhost uses the asynchronous 
-enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is 1:1 in 4k-pages environment.
+	ethtool -L ens5 combined 8
+	ifconfig ens5 1.1.1.2
+	arp -s 1.1.1.8 52:54:00:00:00:02
 
-1. Bind one nic port to vfio-pci and one dsa device to idxd like common step 1 and 3::
+5. On VM2, set virtio device IP and run arp protocal::
 
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+	ethtool -L ens5 combined 8
+	ifconfig ens5 1.1.1.8
+	arp -s 1.1.1.2 52:54:00:00:00:01
 
-	#ls /dev/dsa,check wq configure, reset if exist
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py --reset 0
+6. Scp 1MB file form VM1 to VM2::
 
-	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
-	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
-	ls /dev/dsa #check wq configure success
+	Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
 
-2. Launch vhost::
+7. Check the iperf performance between two VMs by below commands::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:4f:00.1 \
-	--vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@wq0.1]
-	testpmd>start
+	Under VM1, run: `iperf -s -i 1`
+	Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
 
-3. Launch virtio-user with 4K-pages::
+8. Quit and relaunch vhost w/ diff dsa channels::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \
-	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,packed_vq=1,queues=1 -- -i
+	./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=2 -a 0000:f6:01.0,max_queues=2 \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,client=1,tso=1,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,client=1,tso=1,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4 \
+	--lcore-dma=[lcore2@0000:f1:01.0-q0,lcore3@0000:f1:01.0-q1,lcore4@0000:f6:01.0-q0,lcore5@0000:f6:01.0-q1]
 	testpmd>start
 
-4. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::
+9. On VM1, set virtio device::
 
-	testpmd>show port stats all
+	<VM1># ethtool -L ens5 combined 4
+
+10. On VM2, set virtio device::
+
+	<VM2># ethtool -L ens5 combined 4
 
-Test Case 10: PVP split ring multi-queues with 4K-pages and dsa kernel driver
+11. Rerun step 6-7.
+
+Test Case 7: PVP split ring multi-queues with 4K-pages and dsa kernel driver
 --------------------------------------------------------------------------------
-This case uses testpmd and Traffic Generator(For example, Trex) to test split ring multi-queues when vhost uses the asynchronous 
-enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is M:N in 4k-pages environment.
+This case tests split ring with multi-queues can work normally in 4k-pages environment when vhost uses the asynchronous operations with dsa kernel driver.
 
-1. Bind one nic port to vfio-pci and 8 dsa device to idxd like common step 1 and 3::
+1. Bind one nic port to vfio-pci and 2 dsa device to idxd like common step 1 and 3::
 
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:00.0
 
 	.ls /dev/dsa #check wq configure, reset if exist
-	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
-	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
+	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 0
+	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 1
 	ls /dev/dsa #check wq configure success
 
 2. Launch vhost by below command::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -m 1024 --no-huge -a 0000:4f:00.1 \
-	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \
-	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \
-	--lcore-dma=[lcore11@wq0.0,lcore11@wq0.7,lcore12@wq0.1,lcore12@wq0.2,lcore12@wq0.3,lcore13@wq0.2,lcore13@wq0.3,lcore13@wq0.4,lcore14@wq0.2,lcore14@wq0.3,lcore14@wq0.4,lcore14@wq0.5,lcore15@wq0.0,lcore15@wq0.1,lcore15@wq0.2,lcore15@wq0.3,lcore15@wq0.4,lcore15@wq0.5,lcore15@wq0.6,lcore15@wq0.7]
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -m 1024 --no-huge -a 0000:6a:00.0 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \
+	--lcore-dma=[lcore11@wq0.0,lcore12@wq0.1,lcore13@wq0.2,lcore14@wq0.3]
 	testpmd>set fwd mac
 	testpmd>start
 
@@ -567,50 +546,43 @@  enqueue operations with dsa kernel driver and the mapping between vrings and dsa
 
 	testpmd>stop
 
-6. restart vhost port and send imix pkts again, check get same throuhput as above::
+6. restart vhost port and send imix packets again, check get same throuhput as above::
 
 	testpmd>start
 	testpmd>show port stats all
 
-7. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels::::
+7. Quit and relaunch vhost with diff dsa virtual channels and 1G-page::::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 \
-	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
-	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
-	--lcore-dma=[lcore11@wq0.0,lcore12@wq0.0,lcore13@wq0.1,lcore13@wq0.2,lcore14@wq0.1,lcore14@wq0.2,lcore15@wq0.1,lcore15@wq0.2]
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:6a:00.0 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+	--lcore-dma=[lcore11@wq0.0,lcore12@wq0.0,lcore13@wq0.1,lcore13@wq1.0,lcore14@wq1.1,lcore14@wq1.2]
 	testpmd>set fwd mac
 	testpmd>start
 
 8. Rerun step 4-6.
 
-Test Case 11: PVP packed ring multi-queues with 4K-pages and dsa kernel driver
+Test Case 8: PVP packed ring multi-queues with 4K-pages and dsa kernel driver
 ---------------------------------------------------------------------------------
-This case uses testpmd and Traffic Generator(For example, Trex) to test packed ring multi-queues when vhost uses the asynchronous
-enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is M:N in 4k-pages environment.
+This case tests split ring with multi-queues can work normally in 4k-pages environment when vhost uses the asynchronous operations with dsa kernel driver.
 
-1. Bind one nic port to vfio-pci and 8 dsa device to idxd like common step 1 and 3::
+1. Bind one nic port to vfio-pci and 2 dsa device to idxd like common step 1 and 3::
 
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:00.0
 
 	.ls /dev/dsa #check wq configure, reset if exist
-	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
-	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
 	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 1
 	ls /dev/dsa #check wq configure success
 
 2. Launch vhost by below command::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -m 1024 --no-huge -a 0000:4f:00.1 \
-	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3]' \
-	--iova=va -- -i --nb-cores=8 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \
-	--lcore-dma=[lcore11@wq0.0,lcore12@wq2.1,lcore13@wq4.2,lcore14@wq6.3]
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -m 1024 --no-huge -a 0000:6a:00.0 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \
+	--lcore-dma=[lcore11@wq0.0,lcore12@wq0.1,lcore13@wq0.2,lcore14@wq0.3]
 	testpmd>set fwd mac
 	testpmd>start
 
@@ -630,26 +602,26 @@  enqueue operations with dsa kernel driver and the mapping between vrings and dsa
 
 	testpmd>stop
 
-6. restart vhost port and send imix pkts again, check get same throuhput as above::
+6. restart vhost port and send imix packets again, check get same throuhput as above::
 
 	testpmd>start
 	testpmd>show port stats all
 
-7. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels::::
+7. Quit and relaunch vhost::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18  -a 0000:4f:00.1 \
-	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \
-	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
-	--lcore-dma=[lcore11@wq0.0,lcore11@wq0.7,lcore12@wq0.1,lcore12@wq0.2,lcore12@wq0.3,lcore13@wq0.2,lcore13@wq0.3,lcore13@wq0.4,lcore14@wq0.2,lcore14@wq0.3,lcore14@wq0.4,lcore14@wq0.5,lcore15@wq0.0,lcore15@wq0.1,lcore15@wq0.2,lcore15@wq0.3,lcore15@wq0.4,lcore15@wq0.5,lcore15@wq0.6,lcore15@wq0.7]
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18  -a 0000:6a:00.0 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+	--lcore-dma=[lcore11@wq0.0,lcore11@wq0.1,lcore12@wq1.0,lcore2@wq1.1]
 	testpmd>set fwd mac
 	testpmd>start
 
 8. Rerun step 4-6.
 
-Test Case 12: VM2VM split ring vhost-user/virtio-net 4K-pages and dsa kernel driver test with tcp traffic
+Test Case 9: VM2VM split ring vhost-user/virtio-net 4K-pages and dsa kernel driver test with tcp traffic
 ---------------------------------------------------------------------------------------------------------
 This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net split ring mergeable path
-by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver
+by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous operations with dsa dpdk driver
 in 4k-pages environment.
 
 1. Bind 1 dsa device to idxd like common step 2::
@@ -663,16 +635,16 @@  in 4k-pages environment.
 2. Launch the Vhost sample by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0]' \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0;rxq0]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0;rxq0]' \
 	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --rxq=1 --txq=1 --no-numa --socket-num=0 --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore3@wq0.2,lcore3@wq0.3]
 	testpmd>start
 
 3. Launch VM1 and VM2 on socket 1::
 
-	taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+	taskset -c 7 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img  \
 	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
 	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
 	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -681,9 +653,9 @@  in 4k-pages environment.
 	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
 	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
 
-	taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+	taskset -c 8 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img  \
 	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
 	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
 	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -711,10 +683,10 @@  in 4k-pages environment.
 
 	testpmd>show port xstats all
 
-Test Case 13: VM2VM packed ring vhost-user/virtio-net 4K-pages and dsa kernel driver test with tcp traffic
+Test Case 10: VM2VM packed ring vhost-user/virtio-net 4K-pages and dsa kernel driver test with tcp traffic
 -----------------------------------------------------------------------------------------------------------
 This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net packed ring mergeable path
-by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver
+by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous operations with dsa dpdk driver
 in 4k-pages environment.
 
 1. Bind 2 dsa device to idxd like common step 2::
@@ -723,22 +695,22 @@  in 4k-pages environment.
 	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0
 	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
 	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 1
 	ls /dev/dsa #check wq configure success
 
 2. Launch the Vhost sample by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0]' \
-	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --no-numa --socket-num=0 --lcore-dma=[lcore3@wq0.0,lcore4@wq2.0]
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0;rxq0]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0;rxq0]' \
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --no-numa --socket-num=0 --lcore-dma=[lcore3@wq0.0,lcore4@wq1.0]
 	testpmd>start
 
 3. Launch VM1 and VM2 with qemu::
 
-	taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+	taskset -c 7 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img  \
 	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
 	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
 	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -747,9 +719,9 @@  in 4k-pages environment.
 	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
 	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
 
-	taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+	taskset -c 8 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img  \
 	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
 	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
 	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -777,10 +749,10 @@  in 4k-pages environment.
 
 	testpmd>show port xstats all
 
-Test Case 14: vm2vm vhost/virtio-net split packed ring multi queues with 1G/4k-pages and dsa kernel driver
+Test Case 11: VM2VM vhost/virtio-net split packed ring multi queues with 1G/4k-pages and dsa kernel driver
 -----------------------------------------------------------------------------------------------------------
 This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
-vm2vm vhost-user/virtio-net split and packed ring mergeable path when vhost uses the asynchronous enqueue operations with
+vm2vm vhost-user/virtio-net split and packed ring mergeable path when vhost uses the asynchronous operations with
 dsa kernel driver. The vhost run in 1G hugepages and the virtio-user run in 4k-pages environment.
 
 1. Bind 8 dsa device to idxd like common step 3::
@@ -789,29 +761,29 @@  dsa kernel driver. The vhost run in 1G hugepages and the virtio-user run in 4k-p
 	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
 	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
 	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 1
 	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 3
 	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 5
 	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 7
 	ls /dev/dsa #check wq configure success
 
 2. Launch vhost::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq1;txq2;txq3;txq4;txq5;txq6]' \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
 	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
-	--lcore-dma=[lcore2@wq0.0,lcore2@wq2.1,lcore2@wq4.2,lcore2@wq6.3,lcore3@wq0.0,lcore3@wq4.2,lcore3@wq8.4,lcore3@wq10.5,lcore3@wq12.6,lcore3@wq14.7,lcore4@wq2.1,lcore4@wq6.3,lcore4@wq0.1,lcore4@wq2.2,lcore4@wq4.3,lcore4@wq6.4,lcore4@wq8.5,lcore4@wq10.6,lcore4@wq12.7,lcore5@wq14.0]
+	--lcore-dma=[lcore2@wq0.0,lcore2@wq1.1,lcore2@wq2.2,lcore2@wq3.3,lcore3@wq0.0,lcore3@wq2.2,lcore3@wq4.4,lcore3@wq5.5,lcore3@wq6.6,lcore3@wq7.7,lcore4@wq1.1,lcore4@wq3.3,lcore4@wq0.1,lcore4@wq1.2,lcore4@wq2.3,lcore4@wq3.4,lcore4@wq4.5,lcore4@wq5.6,lcore4@wq6.7,lcore5@wq7.0]
 	testpmd>start
 
 3. Launch VM qemu::
 
-	taskset -c 32 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+	taskset -c 32 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img  \
 	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
 	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
 	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -820,9 +792,9 @@  dsa kernel driver. The vhost run in 1G hugepages and the virtio-user run in 4k-p
 	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
 	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
 
-	taskset -c 33 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+	taskset -c 33 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img  \
 	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
 	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
 	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -852,266 +824,98 @@  dsa kernel driver. The vhost run in 1G hugepages and the virtio-user run in 4k-p
 	<VM1># iperf -s -i 1
 	<VM2># iperf -c 1.1.1.2 -i 1 -t 60
 
-Test Case 15: PVP split and packed ring dynamic queue number test with dsa dpdk and kernel driver
----------------------------------------------------------------------------------------------------
-This case uses testpmd and Traffic Generator(For example, Trex) to test split and packed ring when vhost uses the asynchronous enqueue operations
-with dsa dpdk and kernel driver and if the vhost-user can work well when the queue number dynamic change.
+8. Relaunch vm1 and rerun step 4-7.
 
-1. bind 2 dsa device to idxd, 2 dsa device to vfio-pci and one nic port to vfio-pci like common step 1-3::
+Test Case 12: VM2VM vhost/virtio-net split ring multi queues with 1G/4k-pages and dsa kernel driver
+-----------------------------------------------------------------------------------------------------
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
+vm2vm vhost-user/virtio-net split ring mergeable path when vhost uses the asynchronous operations with
+dsa kernel driver. The vhost run in 1G hugepages and the virtio-user run in 4k-pages environment.
 
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+1. Bind 2 dsa channel to idxd, launch vhost::
 
 	ls /dev/dsa #check wq configure, reset if exist
-	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 2
-	ls /dev/dsa #check wq configure success
+	./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0
+	./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
+	./drivers/raw/ioat/dpdk_idxd_cfg.py -q 4 0
+	./drivers/raw/ioat/dpdk_idxd_cfg.py -q 4 1
 
 2. Launch vhost::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-huge -m 1024 --file-prefix=vhost -a 0000:4f:00.1 \
-	--vdev 'net_vhost0,iface=/tmp/s0,queues=2,client=1,dmas=[txq0;txq1]' \
-	--iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=2 --rxq=2 --no-numa --socket-num=0 --lcore-dma=[lcore3@wq0.0,lcore3@wq2.0]
-	testpmd>set fwd mac
-	testpmd>start
-
-3. Launch virtio-user with split ring mergeable in-order path by below command::
-
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \
-	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8,server=1 \
-	-- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8
-	testpmd>set fwd mac
-	testpmd>start
-
-4. Send imix packets from packet generator with random ip, check perforamnce can get target.
-
-5. Stop vhost port, check vhost RX and TX direction both exist packtes in 2 queues from vhost log.
-
-6. Quit and relaunch vhost as below command::
-
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-huge -m 1024 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:e7:01.0 -a 0000:ec:01.0 \
-	--vdev 'net_vhost0,iface=/tmp/s0,queues=4,client=1,dmas=[txq0;txq1;txq2;txq3]' \
-	--iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=4 --rxq=4 --no-numa --socket-num=0 --lcore-dma=[lcore3@0000:e7:01.0-q0,lcore3@0000:e7:01.0-q1,lcore3@0000:ec:01.0-q2,lcore3@0000:ec:01.0-q3]
-	testpmd>set fwd mac
-	testpmd>start
-
-7. Send imix packets from packet generator with random ip, check perforamnce can get target.
-
-8. Stop vhost port, check vhost RX and TX direction both exist packtes in 4 queues from vhost log.
-
-9. Quit and relaunch vhost as below command::
-
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-huge -m 1024 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:e7:01.0 -a 0000:ec:01.0 \
-	--vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5]' \
-	--iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 --lcore-dma=[lcore3@wq0.0,lcore3@wq2.0,lcore3@wq2.2,lcore3@0000:e7:01.0-q0,lcore3@0000:e7:01.0-q1,lcore3@0000:ec:01.0-q3]
-	testpmd>set fwd mac
-	testpmd>start
-
-10. Send imix packets from packet generator with random ip, check perforamnce can get target.
-
-11. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log.
-
-12. Quit and relaunch vhost with diff cahnnels as below command::
-
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-huge -m 1024 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:e7:01.0 -a 0000:ec:01.0 \
-	--vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
-	--iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 --lcore-dma=[lcore3@wq0.0,lcore3@wq0.1,lcore3@wq2.1,lcore3@wq2.0,lcore3@0000:e7:01.0-q1,lcore3@0000:ec:01.0-q3]
-	testpmd>set fwd mac
-	testpmd>start
-
-13. Send imix packets from packet generator with random ip, check perforamnce can get target.
-
-14. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log.
-
-15. Quit and relaunch virtio-user with packed ring mergeable in-order path by below command::
-
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \
-	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8,server=1 \
-	-- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8
-	testpmd>set fwd mac
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:6a:01.0,max_queues=4 -a 0000:6f:01.0,max_queues=4 \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
+	--lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore3@wq0.2,lcore3@wq0.3,lcore4@wq1.0,lcore4@wq1.1,lcore5@wq1.2,lcore5@wq1.3]
 	testpmd>start
 
-16. Rerun steps 4-5.
-
-Test Case 16: VM2VM split ring vhost-user/virtio-net non-mergeable 4k-pages 16 queues dsa dpdk and kernel driver test with large packet payload valid check
--------------------------------------------------------------------------------------------------------------------------------------------------------------
-This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
-vm2vm vhost-user/virtio-net split ring non-mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk
-and kernel driver. The dynamic change of multi-queues number also test.
-
-1. Bind 4 dsa device to vfio-pci and 4 dsa device to idxd like common step 2-3::
-
-	ls /dev/dsa #check wq configure, reset if exist
-	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0
-	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6
-	ls /dev/dsa #check wq configure success
-	<dpdk dir># ./usertools/dpdk-devbind.py -u 0000:e7:01.0 0000:ec:01.0 0000:f1:01.0 0000:f6:01.0
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:e7:01.0 0000:ec:01.0 0000:f1:01.0 0000:f6:01.0
-
-2. Launch the Vhost sample by below commands::
+3. Prepare tmpfs with 4K-pages::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost  \
-	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --no-numa --socket-num=0 \
-	--lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:e7:01.0-q1,lcore2@0000:ec:01.0-q0,lcore2@0000:ec:01.0-q1,lcore3@wq0.0,lcore3@wq2.0,lcore4@0000:e7:01.0-q4,lcore4@0000:e7:01.0-q5,lcore4@0000:ec:01.0-q4,lcore4@0000:ec:01.0-q5,lcore5@wq4.1,lcore5@wq2.1]
-	testpmd>start
+	mkdir /mnt/tmpfs_4k
+	mkdir /mnt/tmpfs_4k_2
+	mount tmpfs /mnt/tmpfs_4k -t tmpfs -o size=4G
+	mount tmpfs /mnt/tmpfs_4k_2 -t tmpfs -o size=4G
 
-3. Launch VM1 and VM2::
+4. Launch VM qemu::
 
-	taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+	taskset -c 10 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04.img  \
 	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
 	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
 	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
 	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
 	-chardev socket,id=char0,path=./vhost-net0,server \
-	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \
-	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
 
-	taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+	taskset -c 11 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-numa node,memdev=mem -mem-prealloc -drive file=/home/xingguang/osimg/ubuntu20-04-2.img  \
 	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
 	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
 	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
 	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
 	-chardev socket,id=char0,path=./vhost-net1,server \
-	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \
-	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
-
-4. On VM1, set virtio device IP and run arp protocal::
-
-	<VM1># ethtool -L ens5 combined 16
-	<VM1># ifconfig ens5 1.1.1.2
-	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02
-
-5. On VM2, set virtio device IP and run arp protocal::
-
-	<VM2># ethtool -L ens5 combined 16
-	<VM2># ifconfig ens5 1.1.1.8
-	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01
-
-6. Scp 1MB file form VM1 to VM2::
-
-	<VM1># scp <file>> root@1.1.1.8:/
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
 
-7. Check the iperf performance between two VMs by below commands::
+5. On VM1, set virtio device IP and run arp protocal::
 
-	<VM1># iperf -s -i 1
-	<VM2># iperf -c 1.1.1.2 -i 1 -t 60
+	ethtool -L ens5 combined 8
+	ifconfig ens5 1.1.1.2
+	arp -s 1.1.1.8 52:54:00:00:00:02
 
-8. Quit vhost ports and relaunch vhost ports w/ diff dsa channels::
+6. On VM2, set virtio device IP and run arp protocal::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
-	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13]' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --no-numa --socket-num=0 --lcore-dma=[lcore2@0000:e7:01.0-q2,lcore2@0000:f1:01.0-q3,lcore2@0000:f1:01.0-q1,lcore2@wq4.2,lcore3@wq6.1,lcore3@wq6.3,lcore4@0000:e7:01.0-q2,lcore4@0000:f6:01.0-q5,lcore4@wq4.2,lcore4@wq6.0,lcore5@wq4.2,lcore5@wq6.0]
-	testpmd>start
+	ethtool -L ens5 combined 8
+	ifconfig ens5 1.1.1.8
+	arp -s 1.1.1.2 52:54:00:00:00:01
 
-9. rerun step 6-7.
+7. Scp 1MB file form VM1 to VM2::
 
-10. Quit vhost ports and relaunch vhost ports w/o dsa channels::
+	Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --no-numa --socket-num=0
-	testpmd>start
+8. Check the iperf performance between two VMs by below commands::
 
-11. Rerun step 6-7.
+	Under VM1, run: `iperf -s -i 1`
+	Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
 
-12. Quit vhost ports and relaunch vhost ports with 1 queues::
+9. Quit and relaunch vhost w/ diff dsa channels::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1 --no-numa --socket-num=0
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4 \
+	--lcore-dma=[lcore2@wq0.0,lcore3@wq0.1,lcore4@wq1.0,lcore5@wq1.1]
 	testpmd>start
 
-13. On VM1, set virtio device::
+10. On VM1, set virtio device::
 
-	<VM1># ethtool -L ens5 combined 1
+	<VM1># ethtool -L ens5 combined 4
 
-14. On VM2, set virtio device::
+11. On VM2, set virtio device::
 
-	<VM2># ethtool -L ens5 combined 1
-
-15. Rerun step 5-6.
-
-Test Case 17: vm2vm packed ring vhost-user/virtio-net mergeable 16 queues dsa dpdk and kernel driver test with large packet payload valid check
---------------------------------------------------------------------------------------------------------------------------------------------------
-This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
-vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk
-and kernel driver. The dynamic change of multi-queues number also test.
-
-1. Bind 4 dsa device to vfio-pci and 4 dsa device to idxd like common step 2-3::
-
-	ls /dev/dsa #check wq configure, reset if exist
-	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 f1:01.0 f6:01.0
-	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0
-	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 2
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 4
-	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 6
-	ls /dev/dsa #check wq configure success
-
-2. Launch the Vhost sample by below commands::
-
-	rm -rf vhost-net*
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --no-numa --socket-num=0 \
-	--lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore2@wq2.0,lcore2@wq2.1,lcore3@wq0.1,lcore3@wq2.0,lcore3@0000:e7:01.0-q4,lcore3@0000:ec:01.0-q5,lcore3@0000:f1:01.0-q6,lcore3@0000:f6:01.0-q7,lcore4@0000:e7:01.0-q4,lcore4@0000:ec:01.0-q5,lcore4@0000:f1:01.0-q1,lcore4@wq2.0,lcore5@wq4.1,lcore5@wq2.0,lcore5@wq4.1,lcore5@wq6.2]
-	testpmd>start
-
-3. Launch VM1 and VM2 with qemu::
-
-	taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
-	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
-	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
-	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
-	-chardev socket,id=char0,path=./vhost-net0 \
-	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \
-	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
-
-	taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
-	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
-	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
-	-chardev socket,id=char0,path=./vhost-net1 \
-	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \
-	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
-
-4. On VM1, set virtio device IP and run arp protocal::
-
-	<VM1># ethtool -L ens5 combined 16
-	<VM1># ifconfig ens5 1.1.1.2
-	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02
-
-5. On VM2, set virtio device IP and run arp protocal::
-
-	<VM2># ethtool -L ens5 combined 16
-	<VM2># ifconfig ens5 1.1.1.8
-	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01
-
-6. Scp 1MB file form VM1 to VM2::
-
-	<VM1># scp <file>> root@1.1.1.8:/
-
-7. Check the iperf performance between two VMs by below commands::
-
-	<VM1># iperf -s -i 1
-	<VM2># iperf -c 1.1.1.2 -i 1 -t 60
+	<VM2># ethtool -L ens5 combined 4
 
-8. Rerun step 6-7 five times.
+12. Rerun step 6-7.