@@ -827,11 +827,12 @@ class L3fwdBase(object):
expected, pps, round(gap, 2))
self.logger.error(msg)
else:
+ expected = pps
msg = ('{0} {1} expected throughput value is not set, '
'ignore check').format(config, frame_size)
self.logger.warning(msg)
status = 'pass'
- js_results.append([status, [pps, linerate - pps], percentage, config, frame_size])
+ js_results.append([status, [pps, pps - expected], percentage, config, frame_size])
# save data with json format
self.__save_throughput_result(self.__cur_case, js_results)
# display result table
@@ -861,6 +862,7 @@ class L3fwdBase(object):
self.__cur_case, {}).get(self.__nic_name, {}).get(
config, {}).get(str(frame_size), {})
zero_loss_rate, tx_pkts, rx_pkts, pps = result if result else [None] * 3
+ zero_loss_rate = zero_loss_rate or 0
mpps = pps / 1000000.0
# expected line rate
_frame_size = self.__get_frame_size(stm_name, frame_size)
@@ -880,22 +882,32 @@ class L3fwdBase(object):
])
# check data with expected values
expected_rate = float(expected_cfg.get('rate') or 100.0)
+ gap = 100 * (zero_loss_rate - expected_rate) / expected_rate
status = 'pass' \
- if zero_loss_rate and zero_loss_rate > expected_rate \
+ if abs(gap) < bias \
else 'failed'
js_results.append(
[status,
- [mpps, linerate - mpps], actual_rate_percent,
+ [mpps, zero_loss_rate - expected_rate], actual_rate_percent,
config, frame_size])
# save data in json file
self.__save_rfc2544_result(self.__cur_case, js_results)
# display result table
+ # Total Cores/Threads/Queues per port
+ # Frame Size
+ # Mode: LPM/EM
+ # Expected LineRate % : which config in l3fwd_lpm_ipv4_rfc2544.cfg
+ # Actual LineRate % : actual run zero loss rate
+ # Expected Throughput (Mpps) : Max linerate throughput value * 'Expected LineRate %'
+ # Actual Throughput (Mpps) : actual run throughput value on the zero loss rate
+ # tx_pkts : send pkts num
+ # rx_pkts : received pkts num
title = [
'Total Cores/Threads/Queues per port',
"Frame Size",
"Mode",
'Expected Throughput (Mpps)',
- 'Actual line rate (Mpps) ',
+ 'Actual Throughput (Mpps) ',
'{} Mode config line rate % '.format(mode.upper()),
'{} Mode actual line rate % '.format(mode.upper()),
'tx_pkts',