diff --git a/doc/guides/rel_notes/release_24_07.rst b/doc/guides/rel_notes/release_24_07.rst
index a69f24cf99..9499352c46 100644
--- a/doc/guides/rel_notes/release_24_07.rst
+++ b/doc/guides/rel_notes/release_24_07.rst
@@ -55,6 +55,10 @@ New Features
      Also, make sure to start the actual text at the margin.
      =======================================================
 
+* **Updated IXGBE base code.**
+
+  * Updated shared code to more recent version.
+  * Added support for E610 device family.
 
 Removed Items
 -------------
diff --git a/drivers/net/ixgbe/base/README b/drivers/net/ixgbe/base/README
index 2c74693924..98353ba26f 100644
--- a/drivers/net/ixgbe/base/README
+++ b/drivers/net/ixgbe/base/README
@@ -1,12 +1,12 @@
 /* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2010-2020 Intel Corporation
+ * Copyright(c) 2010-2024 Intel Corporation
  */
 
 Intel® IXGBE driver
 ===================
 
 This directory contains source code of FreeBSD ixgbe driver of version
-not-released-cid-ixgbe.2020.06.09.tar.gz released by the team which develop
+not-released-cid-ixgbe.2024.04.24.tar.gz released by the team which develop
 basic drivers for any ixgbe NIC. The sub-directory of base/
 contains the original source package.
 This driver is valid for the product(s) listed below
@@ -24,6 +24,7 @@ This driver is valid for the product(s) listed below
 * Intel® Ethernet Server Adapter X520 Series
 * Intel® Ethernet Server Adapter X520-T2
 * Intel® Ethernet Controller X550 Series
+* Intel® Ethernet Controller E610 Series
 
 Updating the driver
 ===================
@@ -32,3 +33,4 @@ NOTE: The source code in this directory should not be modified apart from
 the following file(s):
 
     ixgbe_osdep.h
+    ixgbe_osdep.c
diff --git a/drivers/net/ixgbe/base/ixgbe_e610.c b/drivers/net/ixgbe/base/ixgbe_e610.c
index 6618c21cef..ae9bc70de8 100644
--- a/drivers/net/ixgbe/base/ixgbe_e610.c
+++ b/drivers/net/ixgbe/base/ixgbe_e610.c
@@ -1207,6 +1207,25 @@ s32 ixgbe_discover_func_caps(struct ixgbe_hw *hw,
 	return status;
 }
 
+/**
+ * ixgbe_get_caps - get info about the HW
+ * @hw: pointer to the hardware structure
+ *
+ * Retrieve both device and function capabilities.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_get_caps(struct ixgbe_hw *hw)
+{
+	s32 status;
+
+	status = ixgbe_discover_dev_caps(hw, &hw->dev_caps);
+	if (status)
+		return status;
+
+	return ixgbe_discover_func_caps(hw, &hw->func_caps);
+}
+
 /**
  * ixgbe_aci_disable_rxen - disable RX
  * @hw: pointer to the HW struct
@@ -1275,6 +1294,45 @@ s32 ixgbe_aci_get_phy_caps(struct ixgbe_hw *hw, bool qual_mods, u8 report_mode,
 	return status;
 }
 
+/**
+ * ixgbe_phy_caps_equals_cfg - check if capabilities match the PHY config
+ * @phy_caps: PHY capabilities
+ * @phy_cfg: PHY configuration
+ *
+ * Helper function to determine if PHY capabilities match PHY
+ * configuration
+ *
+ * Return: true if PHY capabilities match PHY configuration.
+ */
+bool
+ixgbe_phy_caps_equals_cfg(struct ixgbe_aci_cmd_get_phy_caps_data *phy_caps,
+			  struct ixgbe_aci_cmd_set_phy_cfg_data *phy_cfg)
+{
+	u8 caps_mask, cfg_mask;
+
+	if (!phy_caps || !phy_cfg)
+		return false;
+
+	/* These bits are not common between capabilities and configuration.
+	 * Do not use them to determine equality.
+	 */
+	caps_mask = IXGBE_ACI_PHY_CAPS_MASK & ~(IXGBE_ACI_PHY_AN_MODE |
+					      IXGBE_ACI_PHY_EN_MOD_QUAL);
+	cfg_mask = IXGBE_ACI_PHY_ENA_VALID_MASK &
+		   ~IXGBE_ACI_PHY_ENA_AUTO_LINK_UPDT;
+
+	if (phy_caps->phy_type_low != phy_cfg->phy_type_low ||
+	    phy_caps->phy_type_high != phy_cfg->phy_type_high ||
+	    ((phy_caps->caps & caps_mask) != (phy_cfg->caps & cfg_mask)) ||
+	    phy_caps->low_power_ctrl_an != phy_cfg->low_power_ctrl_an ||
+	    phy_caps->eee_cap != phy_cfg->eee_cap ||
+	    phy_caps->eeer_value != phy_cfg->eeer_value ||
+	    phy_caps->link_fec_options != phy_cfg->link_fec_opt)
+		return false;
+
+	return true;
+}
+
 /**
  * ixgbe_copy_phy_caps_to_cfg - Copy PHY ability data to configuration data
  * @caps: PHY ability structure to copy data from
@@ -1726,6 +1784,239 @@ s32 ixgbe_aci_get_netlist_node(struct ixgbe_hw *hw,
 	return IXGBE_SUCCESS;
 }
 
+/**
+ * ixgbe_aci_get_netlist_node_pin - get a node pin handle
+ * @hw: pointer to the hw struct
+ * @cmd: get_link_topo_pin AQ structure
+ * @node_handle: output node handle parameter if node found
+ *
+ * Get the netlist node pin and assign it to
+ * the provided handle using ACI command (0x06E1).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_get_netlist_node_pin(struct ixgbe_hw *hw,
+				   struct ixgbe_aci_cmd_get_link_topo_pin *cmd,
+				   u16 *node_handle)
+{
+	struct ixgbe_aci_desc desc;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_get_link_topo_pin);
+	desc.params.get_link_topo_pin = *cmd;
+
+	if (ixgbe_aci_send_cmd(hw, &desc, NULL, 0))
+		return IXGBE_ERR_NOT_SUPPORTED;
+
+	if (node_handle)
+		*node_handle =
+			IXGBE_LE16_TO_CPU(desc.params.get_link_topo_pin.addr.handle);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_find_netlist_node - find a node handle
+ * @hw: pointer to the hw struct
+ * @node_type_ctx: type of netlist node to look for
+ * @node_part_number: node part number to look for
+ * @node_handle: output parameter if node found - optional
+ *
+ * Find and return the node handle for a given node type and part number in the
+ * netlist. When found IXGBE_SUCCESS is returned, IXGBE_ERR_NOT_SUPPORTED
+ * otherwise. If @node_handle provided, it would be set to found node handle.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_find_netlist_node(struct ixgbe_hw *hw, u8 node_type_ctx,
+			    u8 node_part_number, u16 *node_handle)
+{
+	struct ixgbe_aci_cmd_get_link_topo cmd;
+	u8 rec_node_part_number;
+	u16 rec_node_handle;
+	s32 status;
+	u8 idx;
+
+	for (idx = 0; idx < IXGBE_MAX_NETLIST_SIZE; idx++) {
+		memset(&cmd, 0, sizeof(cmd));
+
+		cmd.addr.topo_params.node_type_ctx =
+			(node_type_ctx << IXGBE_ACI_LINK_TOPO_NODE_TYPE_S);
+		cmd.addr.topo_params.index = idx;
+
+		status = ixgbe_aci_get_netlist_node(hw, &cmd,
+						    &rec_node_part_number,
+						    &rec_node_handle);
+		if (status)
+			return status;
+
+		if (rec_node_part_number == node_part_number) {
+			if (node_handle)
+				*node_handle = rec_node_handle;
+			return IXGBE_SUCCESS;
+		}
+	}
+
+	return IXGBE_ERR_NOT_SUPPORTED;
+}
+
+/**
+ * ixgbe_aci_read_i2c - read I2C register value
+ * @hw: pointer to the hw struct
+ * @topo_addr: topology address for a device to communicate with
+ * @bus_addr: 7-bit I2C bus address
+ * @addr: I2C memory address (I2C offset) with up to 16 bits
+ * @params: I2C parameters: bit [7] - Repeated start,
+ *				      bits [6:5] data offset size,
+ *			    bit [4] - I2C address type, bits [3:0] - data size
+ *				      to read (0-16 bytes)
+ * @data: pointer to data (0 to 16 bytes) to be read from the I2C device
+ *
+ * Read the value of the I2C pin register using ACI command (0x06E2).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_read_i2c(struct ixgbe_hw *hw,
+		       struct ixgbe_aci_cmd_link_topo_addr topo_addr,
+		       u16 bus_addr, __le16 addr, u8 params, u8 *data)
+{
+	struct ixgbe_aci_desc desc = { 0 };
+	struct ixgbe_aci_cmd_i2c *cmd;
+	u8 data_size;
+	s32 status;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_read_i2c);
+	cmd = &desc.params.read_write_i2c;
+
+	if (!data)
+		return IXGBE_ERR_PARAM;
+
+	data_size = (params & IXGBE_ACI_I2C_DATA_SIZE_M) >>
+		    IXGBE_ACI_I2C_DATA_SIZE_S;
+
+	cmd->i2c_bus_addr = IXGBE_CPU_TO_LE16(bus_addr);
+	cmd->topo_addr = topo_addr;
+	cmd->i2c_params = params;
+	cmd->i2c_addr = addr;
+
+	status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+	if (!status) {
+		struct ixgbe_aci_cmd_read_i2c_resp *resp;
+		u8 i;
+
+		resp = &desc.params.read_i2c_resp;
+		for (i = 0; i < data_size; i++) {
+			*data = resp->i2c_data[i];
+			data++;
+		}
+	}
+
+	return status;
+}
+
+/**
+ * ixgbe_aci_write_i2c - write a value to I2C register
+ * @hw: pointer to the hw struct
+ * @topo_addr: topology address for a device to communicate with
+ * @bus_addr: 7-bit I2C bus address
+ * @addr: I2C memory address (I2C offset) with up to 16 bits
+ * @params: I2C parameters: bit [4] - I2C address type, bits [3:0] - data size
+ *				      to write (0-7 bytes)
+ * @data: pointer to data (0 to 4 bytes) to be written to the I2C device
+ *
+ * Write a value to the I2C pin register using ACI command (0x06E3).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_write_i2c(struct ixgbe_hw *hw,
+			struct ixgbe_aci_cmd_link_topo_addr topo_addr,
+			u16 bus_addr, __le16 addr, u8 params, u8 *data)
+{
+	struct ixgbe_aci_desc desc = { 0 };
+	struct ixgbe_aci_cmd_i2c *cmd;
+	u8 i, data_size;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_write_i2c);
+	cmd = &desc.params.read_write_i2c;
+
+	data_size = (params & IXGBE_ACI_I2C_DATA_SIZE_M) >>
+		    IXGBE_ACI_I2C_DATA_SIZE_S;
+
+	/* data_size limited to 4 */
+	if (data_size > 4)
+		return IXGBE_ERR_PARAM;
+
+	cmd->i2c_bus_addr = IXGBE_CPU_TO_LE16(bus_addr);
+	cmd->topo_addr = topo_addr;
+	cmd->i2c_params = params;
+	cmd->i2c_addr = addr;
+
+	for (i = 0; i < data_size; i++) {
+		cmd->i2c_data[i] = *data;
+		data++;
+	}
+
+	return ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+}
+
+/**
+ * ixgbe_aci_set_gpio - set GPIO pin state
+ * @hw: pointer to the hw struct
+ * @gpio_ctrl_handle: GPIO controller node handle
+ * @pin_idx: IO Number of the GPIO that needs to be set
+ * @value: SW provide IO value to set in the LSB
+ *
+ * Set the GPIO pin state that is a part of the topology
+ * using ACI command (0x06EC).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_set_gpio(struct ixgbe_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx,
+		       bool value)
+{
+	struct ixgbe_aci_cmd_gpio *cmd;
+	struct ixgbe_aci_desc desc;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_set_gpio);
+	cmd = &desc.params.read_write_gpio;
+	cmd->gpio_ctrl_handle = IXGBE_CPU_TO_LE16(gpio_ctrl_handle);
+	cmd->gpio_num = pin_idx;
+	cmd->gpio_val = value ? 1 : 0;
+
+	return ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+}
+
+/**
+ * ixgbe_aci_get_gpio - get GPIO pin state
+ * @hw: pointer to the hw struct
+ * @gpio_ctrl_handle: GPIO controller node handle
+ * @pin_idx: IO Number of the GPIO that needs to be set
+ * @value: IO value read
+ *
+ * Get the value of a GPIO signal which is part of the topology
+ * using ACI command (0x06ED).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_get_gpio(struct ixgbe_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx,
+		       bool *value)
+{
+	struct ixgbe_aci_cmd_gpio *cmd;
+	struct ixgbe_aci_desc desc;
+	s32 status;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_get_gpio);
+	cmd = &desc.params.read_write_gpio;
+	cmd->gpio_ctrl_handle = IXGBE_CPU_TO_LE16(gpio_ctrl_handle);
+	cmd->gpio_num = pin_idx;
+
+	status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+	if (status)
+		return status;
+
+	*value = !!cmd->gpio_val;
+	return IXGBE_SUCCESS;
+}
+
 /**
  * ixgbe_aci_sff_eeprom - read/write SFF EEPROM
  * @hw: pointer to the HW struct
@@ -1772,6 +2063,72 @@ s32 ixgbe_aci_sff_eeprom(struct ixgbe_hw *hw, u16 lport, u8 bus_addr,
 	return status;
 }
 
+/**
+ * ixgbe_aci_prog_topo_dev_nvm - program Topology Device NVM
+ * @hw: pointer to the hardware structure
+ * @topo_params: pointer to structure storing topology parameters for a device
+ *
+ * Program Topology Device NVM using ACI command (0x06F2).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_prog_topo_dev_nvm(struct ixgbe_hw *hw,
+			struct ixgbe_aci_cmd_link_topo_params *topo_params)
+{
+	struct ixgbe_aci_cmd_prog_topo_dev_nvm *cmd;
+	struct ixgbe_aci_desc desc;
+
+	cmd = &desc.params.prog_topo_dev_nvm;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_prog_topo_dev_nvm);
+
+	memcpy(&cmd->topo_params, topo_params, sizeof(*topo_params));
+
+	return ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+}
+
+/**
+ * ixgbe_aci_read_topo_dev_nvm - read Topology Device NVM
+ * @hw: pointer to the hardware structure
+ * @topo_params: pointer to structure storing topology parameters for a device
+ * @start_address: byte offset in the topology device NVM
+ * @data: pointer to data buffer
+ * @data_size: number of bytes to be read from the topology device NVM
+ * Read Topology Device NVM (0x06F3)
+ *
+ * Read Topology of Device NVM using ACI command (0x06F3).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_read_topo_dev_nvm(struct ixgbe_hw *hw,
+			struct ixgbe_aci_cmd_link_topo_params *topo_params,
+			u32 start_address, u8 *data, u8 data_size)
+{
+	struct ixgbe_aci_cmd_read_topo_dev_nvm *cmd;
+	struct ixgbe_aci_desc desc;
+	s32 status;
+
+	if (!data || data_size == 0 ||
+	    data_size > IXGBE_ACI_READ_TOPO_DEV_NVM_DATA_READ_SIZE)
+		return IXGBE_ERR_PARAM;
+
+	cmd = &desc.params.read_topo_dev_nvm;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_read_topo_dev_nvm);
+
+	desc.datalen = IXGBE_CPU_TO_LE16(data_size);
+	memcpy(&cmd->topo_params, topo_params, sizeof(*topo_params));
+	cmd->start_address = IXGBE_CPU_TO_LE32(start_address);
+
+	status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+	if (status)
+		return status;
+
+	memcpy(data, cmd->data_read, data_size);
+
+	return IXGBE_SUCCESS;
+}
+
 /**
  * ixgbe_acquire_nvm - Generic request for acquiring the NVM ownership
  * @hw: pointer to the HW structure
@@ -1896,6 +2253,37 @@ s32 ixgbe_nvm_validate_checksum(struct ixgbe_hw *hw)
 	return status;
 }
 
+/**
+ * ixgbe_nvm_recalculate_checksum - recalculate checksum
+ * @hw: pointer to the HW struct
+ *
+ * Recalculate NVM PFA checksum using ACI command (0x0706).
+ * The function acquires and then releases the NVM ownership.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_nvm_recalculate_checksum(struct ixgbe_hw *hw)
+{
+	struct ixgbe_aci_cmd_nvm_checksum *cmd;
+	struct ixgbe_aci_desc desc;
+	s32 status;
+
+	status = ixgbe_acquire_nvm(hw, IXGBE_RES_READ);
+	if (status)
+		return status;
+
+	cmd = &desc.params.nvm_checksum;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_nvm_checksum);
+	cmd->flags = IXGBE_ACI_NVM_CHECKSUM_RECALC;
+
+	status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+	ixgbe_release_nvm(hw);
+
+	return status;
+}
+
 /**
  * ixgbe_get_flash_bank_offset - Get offset into requested flash bank
  * @hw: pointer to the HW structure
@@ -2100,6 +2488,60 @@ static s32 ixgbe_read_nvm_sr_copy(struct ixgbe_hw *hw,
 	return ixgbe_read_nvm_module(hw, bank, hdr_len + offset, data);
 }
 
+/**
+ * ixgbe_get_nvm_minsrevs - Get the minsrevs values from flash
+ * @hw: pointer to the HW struct
+ * @minsrevs: structure to store NVM and OROM minsrev values
+ *
+ * Read the Minimum Security Revision TLV and extract
+ * the revision values from the flash image
+ * into a readable structure for processing.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_get_nvm_minsrevs(struct ixgbe_hw *hw,
+			   struct ixgbe_minsrev_info *minsrevs)
+{
+	struct ixgbe_aci_cmd_nvm_minsrev data;
+	s32 status;
+	u16 valid;
+
+	status = ixgbe_acquire_nvm(hw, IXGBE_RES_READ);
+	if (status)
+		return status;
+
+	status = ixgbe_aci_read_nvm(hw, IXGBE_ACI_NVM_MINSREV_MOD_ID,
+				    0, sizeof(data), &data,
+				    true, false);
+
+	ixgbe_release_nvm(hw);
+
+	if (status)
+		return status;
+
+	valid = IXGBE_LE16_TO_CPU(data.validity);
+
+	/* Extract NVM minimum security revision */
+	if (valid & IXGBE_ACI_NVM_MINSREV_NVM_VALID) {
+		u16 minsrev_l = IXGBE_LE16_TO_CPU(data.nvm_minsrev_l);
+		u16 minsrev_h = IXGBE_LE16_TO_CPU(data.nvm_minsrev_h);
+
+		minsrevs->nvm = minsrev_h << 16 | minsrev_l;
+		minsrevs->nvm_valid = true;
+	}
+
+	/* Extract the OROM minimum security revision */
+	if (valid & IXGBE_ACI_NVM_MINSREV_OROM_VALID) {
+		u16 minsrev_l = IXGBE_LE16_TO_CPU(data.orom_minsrev_l);
+		u16 minsrev_h = IXGBE_LE16_TO_CPU(data.orom_minsrev_h);
+
+		minsrevs->orom = minsrev_h << 16 | minsrev_l;
+		minsrevs->orom_valid = true;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
 /**
  * ixgbe_get_nvm_srev - Read the security revision from the NVM CSS header
  * @hw: pointer to the HW struct
@@ -2175,6 +2617,22 @@ static s32 ixgbe_get_nvm_ver_info(struct ixgbe_hw *hw,
 	return IXGBE_SUCCESS;
 }
 
+/**
+ * ixgbe_get_inactive_nvm_ver - Read Option ROM version from the inactive bank
+ * @hw: pointer to the HW structure
+ * @nvm: storage for Option ROM version information
+ *
+ * Reads the NVM EETRACK ID, Map version, and security revision of the
+ * inactive NVM bank. Used to access version data for a pending update that
+ * has not yet been activated.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_get_inactive_nvm_ver(struct ixgbe_hw *hw, struct ixgbe_nvm_info *nvm)
+{
+	return ixgbe_get_nvm_ver_info(hw, IXGBE_INACTIVE_FLASH_BANK, nvm);
+}
+
 /**
  * ixgbe_get_active_nvm_ver - Read Option ROM version from the active bank
  * @hw: pointer to the HW structure
@@ -2190,6 +2648,308 @@ s32 ixgbe_get_active_nvm_ver(struct ixgbe_hw *hw, struct ixgbe_nvm_info *nvm)
 	return ixgbe_get_nvm_ver_info(hw, IXGBE_ACTIVE_FLASH_BANK, nvm);
 }
 
+/**
+ * ixgbe_read_sr_pointer - Read the value of a Shadow RAM pointer word
+ * @hw: pointer to the HW structure
+ * @offset: the word offset of the Shadow RAM word to read
+ * @pointer: pointer value read from Shadow RAM
+ *
+ * Read the given Shadow RAM word, and convert it to a pointer value specified
+ * in bytes. This function assumes the specified offset is a valid pointer
+ * word.
+ *
+ * Each pointer word specifies whether it is stored in word size or 4KB
+ * sector size by using the highest bit. The reported pointer value will be in
+ * bytes, intended for flat NVM reads.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_read_sr_pointer(struct ixgbe_hw *hw, u16 offset, u32 *pointer)
+{
+	s32 status;
+	u16 value;
+
+	status = ixgbe_read_ee_aci_E610(hw, offset, &value);
+	if (status)
+		return status;
+
+	/* Determine if the pointer is in 4KB or word units */
+	if (value & IXGBE_SR_NVM_PTR_4KB_UNITS)
+		*pointer = (value & ~IXGBE_SR_NVM_PTR_4KB_UNITS) * 4 * 1024;
+	else
+		*pointer = value * 2;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_sr_area_size - Read an area size from a Shadow RAM word
+ * @hw: pointer to the HW structure
+ * @offset: the word offset of the Shadow RAM to read
+ * @size: size value read from the Shadow RAM
+ *
+ * Read the given Shadow RAM word, and convert it to an area size value
+ * specified in bytes. This function assumes the specified offset is a valid
+ * area size word.
+ *
+ * Each area size word is specified in 4KB sector units. This function reports
+ * the size in bytes, intended for flat NVM reads.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_read_sr_area_size(struct ixgbe_hw *hw, u16 offset, u32 *size)
+{
+	s32 status;
+	u16 value;
+
+	status = ixgbe_read_ee_aci_E610(hw, offset, &value);
+	if (status)
+		return status;
+
+	/* Area sizes are always specified in 4KB units */
+	*size = value * 4 * 1024;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_discover_flash_size - Discover the available flash size.
+ * @hw: pointer to the HW struct
+ *
+ * The device flash could be up to 16MB in size. However, it is possible that
+ * the actual size is smaller. Use bisection to determine the accessible size
+ * of flash memory.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_discover_flash_size(struct ixgbe_hw *hw)
+{
+	u32 min_size = 0, max_size = IXGBE_ACI_NVM_MAX_OFFSET + 1;
+	s32 status;
+
+	status = ixgbe_acquire_nvm(hw, IXGBE_RES_READ);
+	if (status)
+		return status;
+
+	while ((max_size - min_size) > 1) {
+		u32 offset = (max_size + min_size) / 2;
+		u32 len = 1;
+		u8 data;
+
+		status = ixgbe_read_flat_nvm(hw, offset, &len, &data, false);
+		if (status == IXGBE_ERR_ACI_ERROR &&
+		    hw->aci.last_status == IXGBE_ACI_RC_EINVAL) {
+			status = IXGBE_SUCCESS;
+			max_size = offset;
+		} else if (!status) {
+			min_size = offset;
+		} else {
+			/* an unexpected error occurred */
+			goto err_read_flat_nvm;
+		}
+	}
+
+	hw->flash.flash_size = max_size;
+
+err_read_flat_nvm:
+	ixgbe_release_nvm(hw);
+
+	return status;
+}
+
+/**
+ * ixgbe_determine_active_flash_banks - Discover active bank for each module
+ * @hw: pointer to the HW struct
+ *
+ * Read the Shadow RAM control word and determine which banks are active for
+ * the NVM, OROM, and Netlist modules. Also read and calculate the associated
+ * pointer and size. These values are then cached into the ixgbe_flash_info
+ * structure for later use in order to calculate the correct offset to read
+ * from the active module.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_determine_active_flash_banks(struct ixgbe_hw *hw)
+{
+	struct ixgbe_bank_info *banks = &hw->flash.banks;
+	u16 ctrl_word;
+	s32 status;
+
+	status = ixgbe_read_ee_aci_E610(hw, E610_SR_NVM_CTRL_WORD, &ctrl_word);
+	if (status) {
+		return status;
+	}
+
+	/* Check that the control word indicates validity */
+	if ((ctrl_word & IXGBE_SR_CTRL_WORD_1_M) >> IXGBE_SR_CTRL_WORD_1_S !=
+	    IXGBE_SR_CTRL_WORD_VALID) {
+		return IXGBE_ERR_CONFIG;
+	}
+
+	if (!(ctrl_word & IXGBE_SR_CTRL_WORD_NVM_BANK))
+		banks->nvm_bank = IXGBE_1ST_FLASH_BANK;
+	else
+		banks->nvm_bank = IXGBE_2ND_FLASH_BANK;
+
+	if (!(ctrl_word & IXGBE_SR_CTRL_WORD_OROM_BANK))
+		banks->orom_bank = IXGBE_1ST_FLASH_BANK;
+	else
+		banks->orom_bank = IXGBE_2ND_FLASH_BANK;
+
+	if (!(ctrl_word & IXGBE_SR_CTRL_WORD_NETLIST_BANK))
+		banks->netlist_bank = IXGBE_1ST_FLASH_BANK;
+	else
+		banks->netlist_bank = IXGBE_2ND_FLASH_BANK;
+
+	status = ixgbe_read_sr_pointer(hw, E610_SR_1ST_NVM_BANK_PTR,
+				       &banks->nvm_ptr);
+	if (status) {
+		return status;
+	}
+
+	status = ixgbe_read_sr_area_size(hw, E610_SR_NVM_BANK_SIZE,
+					 &banks->nvm_size);
+	if (status) {
+		return status;
+	}
+
+	status = ixgbe_read_sr_pointer(hw, E610_SR_1ST_OROM_BANK_PTR,
+				       &banks->orom_ptr);
+	if (status) {
+		return status;
+	}
+
+	status = ixgbe_read_sr_area_size(hw, E610_SR_OROM_BANK_SIZE,
+					 &banks->orom_size);
+	if (status) {
+		return status;
+	}
+
+	status = ixgbe_read_sr_pointer(hw, E610_SR_NETLIST_BANK_PTR,
+				       &banks->netlist_ptr);
+	if (status) {
+		return status;
+	}
+
+	status = ixgbe_read_sr_area_size(hw, E610_SR_NETLIST_BANK_SIZE,
+					 &banks->netlist_size);
+	if (status) {
+		return status;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_init_nvm - initializes NVM setting
+ * @hw: pointer to the HW struct
+ *
+ * Read and populate NVM settings such as Shadow RAM size,
+ * max_timeout, and blank_nvm_mode
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_init_nvm(struct ixgbe_hw *hw)
+{
+	struct ixgbe_flash_info *flash = &hw->flash;
+	u32 fla, gens_stat, status;
+	u8 sr_size;
+
+	/* The SR size is stored regardless of the NVM programming mode
+	 * as the blank mode may be used in the factory line.
+	 */
+	gens_stat = IXGBE_READ_REG(hw, GLNVM_GENS);
+	sr_size = (gens_stat & GLNVM_GENS_SR_SIZE_M) >> GLNVM_GENS_SR_SIZE_S;
+
+	/* Switching to words (sr_size contains power of 2) */
+	flash->sr_words = BIT(sr_size) * IXGBE_SR_WORDS_IN_1KB;
+
+	/* Check if we are in the normal or blank NVM programming mode */
+	fla = IXGBE_READ_REG(hw, GLNVM_FLA);
+	if (fla & GLNVM_FLA_LOCKED_M) { /* Normal programming mode */
+		flash->blank_nvm_mode = false;
+	} else {
+		/* Blank programming mode */
+		flash->blank_nvm_mode = true;
+		return IXGBE_ERR_NVM_BLANK_MODE;
+	}
+
+	status = ixgbe_discover_flash_size(hw);
+	if (status) {
+		return status;
+	}
+
+	status = ixgbe_determine_active_flash_banks(hw);
+	if (status) {
+		return status;
+	}
+
+	status = ixgbe_get_nvm_ver_info(hw, IXGBE_ACTIVE_FLASH_BANK,
+					&flash->nvm);
+	if (status) {
+		return status;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_sanitize_operate - Clear the user data
+ * @hw: pointer to the HW struct
+ *
+ * Clear user data from NVM using ACI command (0x070C).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_sanitize_operate(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u8 values;
+
+	u8 cmd_flags = IXGBE_ACI_SANITIZE_REQ_OPERATE |
+		       IXGBE_ACI_SANITIZE_OPERATE_SUBJECT_CLEAR;
+
+	status = ixgbe_sanitize_nvm(hw, cmd_flags, &values);
+	if (status)
+		return status;
+	if ((!(values & IXGBE_ACI_SANITIZE_OPERATE_HOST_CLEAN_DONE) &&
+	     !(values & IXGBE_ACI_SANITIZE_OPERATE_BMC_CLEAN_DONE)) ||
+	    ((values & IXGBE_ACI_SANITIZE_OPERATE_HOST_CLEAN_DONE) &&
+	     !(values & IXGBE_ACI_SANITIZE_OPERATE_HOST_CLEAN_SUCCESS)) ||
+	    ((values & IXGBE_ACI_SANITIZE_OPERATE_BMC_CLEAN_DONE) &&
+	     !(values & IXGBE_ACI_SANITIZE_OPERATE_BMC_CLEAN_SUCCESS)))
+		return IXGBE_ERR_ACI_ERROR;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_sanitize_nvm - Sanitize NVM
+ * @hw: pointer to the HW struct
+ * @cmd_flags: flag to the ACI command
+ * @values: values returned from the command
+ *
+ * Sanitize NVM using ACI command (0x070C).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_sanitize_nvm(struct ixgbe_hw *hw, u8 cmd_flags, u8 *values)
+{
+	struct ixgbe_aci_desc desc;
+	struct ixgbe_aci_cmd_nvm_sanitization *cmd;
+	s32 status;
+
+	cmd = &desc.params.nvm_sanitization;
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_nvm_sanitization);
+	cmd->cmd_flags = cmd_flags;
+
+	status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+	if (values)
+		*values = cmd->values;
+
+	return status;
+}
+
 /**
  * ixgbe_read_sr_word_aci - Reads Shadow RAM via ACI
  * @hw: pointer to the HW structure
@@ -2310,6 +3070,335 @@ s32 ixgbe_read_flat_nvm(struct ixgbe_hw  *hw, u32 offset, u32 *length,
 	return status;
 }
 
+/**
+ * ixgbe_aci_alternate_write - write to alternate structure
+ * @hw: pointer to the hardware structure
+ * @reg_addr0: address of first dword to be written
+ * @reg_val0: value to be written under 'reg_addr0'
+ * @reg_addr1: address of second dword to be written
+ * @reg_val1: value to be written under 'reg_addr1'
+ *
+ * Write one or two dwords to alternate structure using ACI command (0x0900).
+ * Fields are indicated by 'reg_addr0' and 'reg_addr1' register numbers.
+ *
+ * Return: 0 on success and error code on failure.
+ */
+s32 ixgbe_aci_alternate_write(struct ixgbe_hw *hw, u32 reg_addr0,
+			      u32 reg_val0, u32 reg_addr1, u32 reg_val1)
+{
+	struct ixgbe_aci_cmd_read_write_alt_direct *cmd;
+	struct ixgbe_aci_desc desc;
+	s32 status;
+
+	cmd = &desc.params.read_write_alt_direct;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_write_alt_direct);
+	cmd->dword0_addr = IXGBE_CPU_TO_LE32(reg_addr0);
+	cmd->dword1_addr = IXGBE_CPU_TO_LE32(reg_addr1);
+	cmd->dword0_value = IXGBE_CPU_TO_LE32(reg_val0);
+	cmd->dword1_value = IXGBE_CPU_TO_LE32(reg_val1);
+
+	status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+	return status;
+}
+
+/**
+ * ixgbe_aci_alternate_read - read from alternate structure
+ * @hw: pointer to the hardware structure
+ * @reg_addr0: address of first dword to be read
+ * @reg_val0: pointer for data read from 'reg_addr0'
+ * @reg_addr1: address of second dword to be read
+ * @reg_val1: pointer for data read from 'reg_addr1'
+ *
+ * Read one or two dwords from alternate structure using ACI command (0x0902).
+ * Fields are indicated by 'reg_addr0' and 'reg_addr1' register numbers.
+ * If 'reg_val1' pointer is not passed then only register at 'reg_addr0'
+ * is read.
+ *
+ * Return: 0 on success and error code on failure.
+ */
+s32 ixgbe_aci_alternate_read(struct ixgbe_hw *hw, u32 reg_addr0,
+			     u32 *reg_val0, u32 reg_addr1, u32 *reg_val1)
+{
+	struct ixgbe_aci_cmd_read_write_alt_direct *cmd;
+	struct ixgbe_aci_desc desc;
+	s32 status;
+
+	cmd = &desc.params.read_write_alt_direct;
+
+	if (!reg_val0)
+		return IXGBE_ERR_PARAM;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_read_alt_direct);
+	cmd->dword0_addr = IXGBE_CPU_TO_LE32(reg_addr0);
+	cmd->dword1_addr = IXGBE_CPU_TO_LE32(reg_addr1);
+
+	status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+	if (status == IXGBE_SUCCESS) {
+		*reg_val0 = IXGBE_LE32_TO_CPU(cmd->dword0_value);
+
+		if (reg_val1)
+			*reg_val1 = IXGBE_LE32_TO_CPU(cmd->dword1_value);
+	}
+
+	return status;
+}
+
+/**
+ * ixgbe_aci_alternate_write_done - check if writing to alternate structure
+ * is done
+ * @hw: pointer to the HW structure.
+ * @bios_mode: indicates whether the command is executed by UEFI or legacy BIOS
+ * @reset_needed: indicates the SW should trigger GLOBAL reset
+ *
+ * Indicates to the FW that alternate structures have been changed.
+ *
+ * Return: 0 on success and error code on failure.
+ */
+s32 ixgbe_aci_alternate_write_done(struct ixgbe_hw *hw, u8 bios_mode,
+				   bool *reset_needed)
+{
+	struct ixgbe_aci_cmd_done_alt_write *cmd;
+	struct ixgbe_aci_desc desc;
+	s32 status;
+
+	cmd = &desc.params.done_alt_write;
+
+	if (!reset_needed)
+		return IXGBE_ERR_PARAM;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_done_alt_write);
+	cmd->flags = bios_mode;
+
+	status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+	if (!status)
+		*reset_needed = (IXGBE_LE16_TO_CPU(cmd->flags) &
+				 IXGBE_ACI_RESP_RESET_NEEDED) != 0;
+
+	return status;
+}
+
+/**
+ * ixgbe_aci_alternate_clear - clear alternate structure
+ * @hw: pointer to the HW structure.
+ *
+ * Clear the alternate structures of the port from which the function
+ * is called.
+ *
+ * Return: 0 on success and error code on failure.
+ */
+s32 ixgbe_aci_alternate_clear(struct ixgbe_hw *hw)
+{
+	struct ixgbe_aci_desc desc;
+	s32 status;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc,
+					ixgbe_aci_opc_clear_port_alt_write);
+
+	status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+	return status;
+}
+
+/**
+ * ixgbe_aci_get_internal_data - get internal FW/HW data
+ * @hw: pointer to the hardware structure
+ * @cluster_id: specific cluster to dump
+ * @table_id: table ID within cluster
+ * @start: index of line in the block to read
+ * @buf: dump buffer
+ * @buf_size: dump buffer size
+ * @ret_buf_size: return buffer size (returned by FW)
+ * @ret_next_cluster: next cluster to read (returned by FW)
+ * @ret_next_table: next block to read (returned by FW)
+ * @ret_next_index: next index to read (returned by FW)
+ *
+ * Get internal FW/HW data using ACI command (0xFF08) for debug purposes.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_get_internal_data(struct ixgbe_hw *hw, u16 cluster_id,
+				u16 table_id, u32 start, void *buf,
+				u16 buf_size, u16 *ret_buf_size,
+				u16 *ret_next_cluster, u16 *ret_next_table,
+				u32 *ret_next_index)
+{
+	struct ixgbe_aci_cmd_debug_dump_internals *cmd;
+	struct ixgbe_aci_desc desc;
+	s32 status;
+
+	cmd = &desc.params.debug_dump;
+
+	if (buf_size == 0 || !buf)
+		return IXGBE_ERR_PARAM;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc,
+					ixgbe_aci_opc_debug_dump_internals);
+
+	cmd->cluster_id = IXGBE_CPU_TO_LE16(cluster_id);
+	cmd->table_id = IXGBE_CPU_TO_LE16(table_id);
+	cmd->idx = IXGBE_CPU_TO_LE32(start);
+
+	status = ixgbe_aci_send_cmd(hw, &desc, buf, buf_size);
+
+	if (!status) {
+		if (ret_buf_size)
+			*ret_buf_size = IXGBE_LE16_TO_CPU(desc.datalen);
+		if (ret_next_cluster)
+			*ret_next_cluster = IXGBE_LE16_TO_CPU(cmd->cluster_id);
+		if (ret_next_table)
+			*ret_next_table = IXGBE_LE16_TO_CPU(cmd->table_id);
+		if (ret_next_index)
+			*ret_next_index = IXGBE_LE32_TO_CPU(cmd->idx);
+	}
+
+	return status;
+}
+
+/**
+ * ixgbe_validate_nvm_rw_reg - Check that an NVM access request is valid
+ * @cmd: NVM access command structure
+ *
+ * Validates that an NVM access structure is request to read or write a valid
+ * register offset. First validates that the module and flags are correct, and
+ * then ensures that the register offset is one of the accepted registers.
+ *
+ * Return: 0 if the register access is valid, out of range error code otherwise.
+ */
+static s32
+ixgbe_validate_nvm_rw_reg(struct ixgbe_nvm_access_cmd *cmd)
+{
+	u16 i;
+
+	switch (cmd->offset) {
+	case GL_HICR:
+	case GL_HICR_EN: /* Note, this register is read only */
+	case GL_FWSTS:
+	case GL_MNG_FWSM:
+	case GLNVM_GENS:
+	case GLNVM_FLA:
+	case GL_FWRESETCNT:
+		return 0;
+	default:
+		break;
+	}
+
+	for (i = 0; i <= GL_HIDA_MAX_INDEX; i++)
+		if (cmd->offset == (u32)GL_HIDA(i))
+			return 0;
+
+	for (i = 0; i <= GL_HIBA_MAX_INDEX; i++)
+		if (cmd->offset == (u32)GL_HIBA(i))
+			return 0;
+
+	/* All other register offsets are not valid */
+	return IXGBE_ERR_OUT_OF_RANGE;
+}
+
+/**
+ * ixgbe_nvm_access_read - Handle an NVM read request
+ * @hw: pointer to the HW struct
+ * @cmd: NVM access command to process
+ * @data: storage for the register value read
+ *
+ * Process an NVM access request to read a register.
+ *
+ * Return: 0 if the register read is valid and successful,
+ * out of range error code otherwise.
+ */
+static s32 ixgbe_nvm_access_read(struct ixgbe_hw *hw,
+			struct ixgbe_nvm_access_cmd *cmd,
+			struct ixgbe_nvm_access_data *data)
+{
+	s32 status;
+
+	/* Always initialize the output data, even on failure */
+	memset(&data->regval, 0, cmd->data_size);
+
+	/* Make sure this is a valid read/write access request */
+	status = ixgbe_validate_nvm_rw_reg(cmd);
+	if (status)
+		return status;
+
+	DEBUGOUT1("NVM access: reading register %08x\n", cmd->offset);
+
+	/* Read the register and store the contents in the data field */
+	data->regval = IXGBE_READ_REG(hw, cmd->offset);
+
+	return 0;
+}
+
+/**
+ * ixgbe_nvm_access_write - Handle an NVM write request
+ * @hw: pointer to the HW struct
+ * @cmd: NVM access command to process
+ * @data: NVM access data to write
+ *
+ * Process an NVM access request to write a register.
+ *
+ * Return: 0 if the register write is valid and successful,
+ * out of range error code otherwise.
+ */
+static s32 ixgbe_nvm_access_write(struct ixgbe_hw *hw,
+			struct ixgbe_nvm_access_cmd *cmd,
+			struct ixgbe_nvm_access_data *data)
+{
+	s32 status;
+
+	/* Make sure this is a valid read/write access request */
+	status = ixgbe_validate_nvm_rw_reg(cmd);
+	if (status)
+		return status;
+
+	/* Reject requests to write to read-only registers */
+	switch (cmd->offset) {
+	case GL_HICR_EN:
+		return IXGBE_ERR_OUT_OF_RANGE;
+	default:
+		break;
+	}
+
+	DEBUGOUT2("NVM access: writing register %08x with value %08x\n",
+		cmd->offset, data->regval);
+
+	/* Write the data field to the specified register */
+	IXGBE_WRITE_REG(hw, cmd->offset, data->regval);
+
+	return 0;
+}
+
+/**
+ * ixgbe_handle_nvm_access - Handle an NVM access request
+ * @hw: pointer to the HW struct
+ * @cmd: NVM access command info
+ * @data: pointer to read or return data
+ *
+ * Process an NVM access request. Read the command structure information and
+ * determine if it is valid. If not, report an error indicating the command
+ * was invalid.
+ *
+ * For valid commands, perform the necessary function, copying the data into
+ * the provided data buffer.
+ *
+ * Return: 0 if the nvm access request is valid and successful,
+ * error code otherwise.
+ */
+s32 ixgbe_handle_nvm_access(struct ixgbe_hw *hw,
+			struct ixgbe_nvm_access_cmd *cmd,
+			struct ixgbe_nvm_access_data *data)
+{
+	switch (cmd->command) {
+	case IXGBE_NVM_CMD_READ:
+		return ixgbe_nvm_access_read(hw, cmd, data);
+	case IXGBE_NVM_CMD_WRITE:
+		return ixgbe_nvm_access_write(hw, cmd, data);
+	default:
+		return IXGBE_ERR_PARAM;
+	}
+}
+
 /**
  * ixgbe_init_ops_E610 - Inits func ptrs and MAC type
  * @hw: pointer to hardware structure
diff --git a/drivers/net/ixgbe/base/ixgbe_e610.h b/drivers/net/ixgbe/base/ixgbe_e610.h
index 608d60bfee..81e75a6e17 100644
--- a/drivers/net/ixgbe/base/ixgbe_e610.h
+++ b/drivers/net/ixgbe/base/ixgbe_e610.h
@@ -20,6 +20,8 @@ void ixgbe_fill_dflt_direct_cmd_desc(struct ixgbe_aci_desc *desc, u16 opcode);
 
 s32 ixgbe_aci_get_fw_ver(struct ixgbe_hw *hw);
 s32 ixgbe_aci_send_driver_ver(struct ixgbe_hw *hw, struct ixgbe_driver_ver *dv);
+s32 ixgbe_aci_set_pf_context(struct ixgbe_hw *hw, u8 pf_id);
+
 s32 ixgbe_acquire_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res,
 		      enum ixgbe_aci_res_access_type access, u32 timeout);
 void ixgbe_release_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res);
@@ -29,9 +31,12 @@ s32 ixgbe_discover_dev_caps(struct ixgbe_hw *hw,
 			    struct ixgbe_hw_dev_caps *dev_caps);
 s32 ixgbe_discover_func_caps(struct ixgbe_hw* hw,
 			     struct ixgbe_hw_func_caps* func_caps);
+s32 ixgbe_get_caps(struct ixgbe_hw *hw);
 s32 ixgbe_aci_disable_rxen(struct ixgbe_hw *hw);
 s32 ixgbe_aci_get_phy_caps(struct ixgbe_hw *hw, bool qual_mods, u8 report_mode,
 			   struct ixgbe_aci_cmd_get_phy_caps_data *pcaps);
+bool ixgbe_phy_caps_equals_cfg(struct ixgbe_aci_cmd_get_phy_caps_data *caps,
+			       struct ixgbe_aci_cmd_set_phy_cfg_data *cfg);
 void ixgbe_copy_phy_caps_to_cfg(struct ixgbe_aci_cmd_get_phy_caps_data *caps,
 				struct ixgbe_aci_cmd_set_phy_cfg_data *cfg);
 s32 ixgbe_aci_set_phy_cfg(struct ixgbe_hw *hw,
@@ -43,9 +48,34 @@ s32 ixgbe_aci_get_link_info(struct ixgbe_hw *hw, bool ena_lse,
 			    struct ixgbe_link_status *link);
 s32 ixgbe_aci_set_event_mask(struct ixgbe_hw *hw, u8 port_num, u16 mask);
 s32 ixgbe_configure_lse(struct ixgbe_hw *hw, bool activate, u16 mask);
+
+s32 ixgbe_aci_get_netlist_node(struct ixgbe_hw *hw,
+			       struct ixgbe_aci_cmd_get_link_topo *cmd,
+			       u8 *node_part_number, u16 *node_handle);
+s32 ixgbe_aci_get_netlist_node_pin(struct ixgbe_hw *hw,
+				   struct ixgbe_aci_cmd_get_link_topo_pin *cmd,
+				   u16 *node_handle);
+s32 ixgbe_find_netlist_node(struct ixgbe_hw *hw, u8 node_type_ctx,
+			    u8 node_part_number, u16 *node_handle);
+s32 ixgbe_aci_read_i2c(struct ixgbe_hw *hw,
+		       struct ixgbe_aci_cmd_link_topo_addr topo_addr,
+		       u16 bus_addr, __le16 addr, u8 params, u8 *data);
+s32 ixgbe_aci_write_i2c(struct ixgbe_hw *hw,
+			struct ixgbe_aci_cmd_link_topo_addr topo_addr,
+			u16 bus_addr, __le16 addr, u8 params, u8 *data);
+s32 ixgbe_aci_set_gpio(struct ixgbe_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx,
+		       bool value);
+s32 ixgbe_aci_get_gpio(struct ixgbe_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx,
+		       bool *value);
 s32 ixgbe_aci_sff_eeprom(struct ixgbe_hw *hw, u16 lport, u8 bus_addr,
 			 u16 mem_addr, u8 page, u8 page_bank_ctrl, u8 *data,
 			 u8 length, bool write);
+s32 ixgbe_aci_prog_topo_dev_nvm(struct ixgbe_hw *hw,
+			struct ixgbe_aci_cmd_link_topo_params *topo_params);
+s32 ixgbe_aci_read_topo_dev_nvm(struct ixgbe_hw *hw,
+			struct ixgbe_aci_cmd_link_topo_params *topo_params,
+			u32 start_address, u8 *data, u8 data_size);
+
 s32 ixgbe_acquire_nvm(struct ixgbe_hw *hw,
 		      enum ixgbe_aci_res_access_type access);
 void ixgbe_release_nvm(struct ixgbe_hw *hw);
@@ -55,11 +85,39 @@ s32 ixgbe_aci_read_nvm(struct ixgbe_hw *hw, u16 module_typeid, u32 offset,
 		       bool read_shadow_ram);
 
 s32 ixgbe_nvm_validate_checksum(struct ixgbe_hw *hw);
+s32 ixgbe_nvm_recalculate_checksum(struct ixgbe_hw *hw);
+
+s32 ixgbe_get_nvm_minsrevs(struct ixgbe_hw *hw, struct ixgbe_minsrev_info *minsrevs);
+s32 ixgbe_get_inactive_nvm_ver(struct ixgbe_hw *hw, struct ixgbe_nvm_info *nvm);
 s32 ixgbe_get_active_nvm_ver(struct ixgbe_hw *hw, struct ixgbe_nvm_info *nvm);
+s32 ixgbe_init_nvm(struct ixgbe_hw *hw);
+
+s32 ixgbe_sanitize_operate(struct ixgbe_hw *hw);
+s32 ixgbe_sanitize_nvm(struct ixgbe_hw *hw, u8 cmd_flags, u8 *values);
+
 s32 ixgbe_read_sr_word_aci(struct ixgbe_hw  *hw, u16 offset, u16 *data);
 s32 ixgbe_read_sr_buf_aci(struct ixgbe_hw *hw, u16 offset, u16 *words, u16 *data);
 s32 ixgbe_read_flat_nvm(struct ixgbe_hw  *hw, u32 offset, u32 *length,
 			u8 *data, bool read_shadow_ram);
+
+s32 ixgbe_aci_alternate_write(struct ixgbe_hw *hw, u32 reg_addr0,
+			      u32 reg_val0, u32 reg_addr1, u32 reg_val1);
+s32 ixgbe_aci_alternate_read(struct ixgbe_hw *hw, u32 reg_addr0,
+			     u32 *reg_val0, u32 reg_addr1, u32 *reg_val1);
+s32 ixgbe_aci_alternate_write_done(struct ixgbe_hw *hw, u8 bios_mode,
+				   bool *reset_needed);
+s32 ixgbe_aci_alternate_clear(struct ixgbe_hw *hw);
+
+s32 ixgbe_aci_get_internal_data(struct ixgbe_hw *hw, u16 cluster_id,
+				u16 table_id, u32 start, void *buf,
+				u16 buf_size, u16 *ret_buf_size,
+				u16 *ret_next_cluster, u16 *ret_next_table,
+				u32 *ret_next_index);
+
+s32 ixgbe_handle_nvm_access(struct ixgbe_hw *hw,
+				struct ixgbe_nvm_access_cmd *cmd,
+				struct ixgbe_nvm_access_data *data);
+
 /* E610 operations */
 s32 ixgbe_reset_hw_E610(struct ixgbe_hw *hw);
 s32 ixgbe_start_hw_E610(struct ixgbe_hw *hw);
diff --git a/drivers/net/ixgbe/base/ixgbe_type_e610.h b/drivers/net/ixgbe/base/ixgbe_type_e610.h
index b366ea571a..35134cdae9 100644
--- a/drivers/net/ixgbe/base/ixgbe_type_e610.h
+++ b/drivers/net/ixgbe/base/ixgbe_type_e610.h
@@ -119,6 +119,14 @@
 #define E610_SR_NVM_CTRL_WORD		0x00
 #define E610_SR_PBA_BLOCK_PTR		0x16
 
+/* The Orom version topology */
+#define IXGBE_OROM_VER_PATCH_SHIFT	0
+#define IXGBE_OROM_VER_PATCH_MASK	(0xff << IXGBE_OROM_VER_PATCH_SHIFT)
+#define IXGBE_OROM_VER_BUILD_SHIFT	8
+#define IXGBE_OROM_VER_BUILD_MASK	(0xffff << IXGBE_OROM_VER_BUILD_SHIFT)
+#define IXGBE_OROM_VER_SHIFT		24
+#define IXGBE_OROM_VER_MASK		(0xff << IXGBE_OROM_VER_SHIFT)
+
 /* CSS Header words */
 #define IXGBE_NVM_CSS_HDR_LEN_L			0x02
 #define IXGBE_NVM_CSS_HDR_LEN_H			0x03
@@ -128,6 +136,39 @@
 /* Length of Authentication header section in words */
 #define IXGBE_NVM_AUTH_HEADER_LEN		0x08
 
+/* The Netlist ID Block is located after all of the Link Topology nodes. */
+#define IXGBE_NETLIST_ID_BLK_SIZE		0x30
+#define IXGBE_NETLIST_ID_BLK_OFFSET(n)		IXGBE_NETLIST_LINK_TOPO_OFFSET(0x0004 + 2 * (n))
+
+/* netlist ID block field offsets (word offsets) */
+#define IXGBE_NETLIST_ID_BLK_MAJOR_VER_LOW	0x02
+#define IXGBE_NETLIST_ID_BLK_MAJOR_VER_HIGH	0x03
+#define IXGBE_NETLIST_ID_BLK_MINOR_VER_LOW	0x04
+#define IXGBE_NETLIST_ID_BLK_MINOR_VER_HIGH	0x05
+#define IXGBE_NETLIST_ID_BLK_TYPE_LOW		0x06
+#define IXGBE_NETLIST_ID_BLK_TYPE_HIGH		0x07
+#define IXGBE_NETLIST_ID_BLK_REV_LOW		0x08
+#define IXGBE_NETLIST_ID_BLK_REV_HIGH		0x09
+#define IXGBE_NETLIST_ID_BLK_SHA_HASH_WORD(n)	(0x0A + (n))
+#define IXGBE_NETLIST_ID_BLK_CUST_VER		0x2F
+
+/* The Link Topology Netlist section is stored as a series of words. It is
+ * stored in the NVM as a TLV, with the first two words containing the type
+ * and length.
+ */
+#define IXGBE_NETLIST_LINK_TOPO_MOD_ID		0x011B
+#define IXGBE_NETLIST_TYPE_OFFSET		0x0000
+#define IXGBE_NETLIST_LEN_OFFSET		0x0001
+
+/* The Link Topology section follows the TLV header. When reading the netlist
+ * using ixgbe_read_netlist_module, we need to account for the 2-word TLV
+ * header.
+ */
+#define IXGBE_NETLIST_LINK_TOPO_OFFSET(n)	((n) + 2)
+#define IXGBE_LINK_TOPO_MODULE_LEN	IXGBE_NETLIST_LINK_TOPO_OFFSET(0x0000)
+#define IXGBE_LINK_TOPO_NODE_COUNT	IXGBE_NETLIST_LINK_TOPO_OFFSET(0x0001)
+#define IXGBE_LINK_TOPO_NODE_COUNT_M	MAKEMASK(0x3FF, 0)
+
 /* Auxiliary field, mask and shift definition for Shadow RAM and NVM Flash */
 #define IXGBE_SR_CTRL_WORD_1_S		0x06
 #define IXGBE_SR_CTRL_WORD_1_M		(0x03 << IXGBE_SR_CTRL_WORD_1_S)
@@ -152,6 +193,9 @@
  */
 #define IXGBE_SR_SW_CHECKSUM_BASE		0xBABA
 
+/* Netlist */
+#define IXGBE_MAX_NETLIST_SIZE			10
+
 /* General registers */
 
 /* Firmware Status Register (GL_FWSTS) */
@@ -227,17 +271,81 @@
 #define GLNVM_FLA_LOCKED_S			6
 #define GLNVM_FLA_LOCKED_M			BIT(6)
 
+/* Bit Bang registers */
+#define RDASB_MSGCTL				0x000B6820
+#define RDASB_MSGCTL_HDR_DWS_S			0
+#define RDASB_MSGCTL_EXP_RDW_S			8
+#define RDASB_MSGCTL_CMDV_M			BIT(31)
+#define RDASB_RSPCTL				0x000B6824
+#define RDASB_RSPCTL_BAD_LENGTH_M		BIT(30)
+#define RDASB_RSPCTL_NOT_SUCCESS_M		BIT(31)
+#define RDASB_WHDR0				0x000B68F4
+#define RDASB_WHDR1				0x000B68F8
+#define RDASB_WHDR2				0x000B68FC
+#define RDASB_WHDR3				0x000B6900
+#define RDASB_WHDR4				0x000B6904
+#define RDASB_RHDR0				0x000B6AFC
+#define RDASB_RHDR0_RESPONSE_S			27
+#define RDASB_RHDR0_RESPONSE_M			MAKEMASK(0x7, 27)
+#define RDASB_RDATA0				0x000B6B00
+#define RDASB_RDATA1				0x000B6B04
+
+/* SPI Registers */
+#define SPISB_MSGCTL				0x000B7020
+#define SPISB_MSGCTL_HDR_DWS_S			0
+#define SPISB_MSGCTL_EXP_RDW_S			8
+#define SPISB_MSGCTL_MSG_MODE_S			26
+#define SPISB_MSGCTL_TOKEN_MODE_S		28
+#define SPISB_MSGCTL_BARCLR_S			30
+#define SPISB_MSGCTL_CMDV_S			31
+#define SPISB_MSGCTL_CMDV_M			BIT(31)
+#define SPISB_RSPCTL				0x000B7024
+#define SPISB_RSPCTL_BAD_LENGTH_M		BIT(30)
+#define SPISB_RSPCTL_NOT_SUCCESS_M		BIT(31)
+#define SPISB_WHDR0				0x000B70F4
+#define SPISB_WHDR0_DEST_SEL_S			12
+#define SPISB_WHDR0_OPCODE_SEL_S		16
+#define SPISB_WHDR0_TAG_S			24
+#define SPISB_WHDR1				0x000B70F8
+#define SPISB_WHDR2				0x000B70FC
+#define SPISB_RDATA				0x000B7300
+#define SPISB_WDATA				0x000B7100
+
+/* Firmware Reset Count register */
+#define GL_FWRESETCNT				0x00083100 /* Reset Source: POR */
+#define GL_FWRESETCNT_FWRESETCNT_S		0
+#define GL_FWRESETCNT_FWRESETCNT_M		MAKEMASK(0xFFFFFFFF, 0)
+
 /* Admin Command Interface (ACI) registers */
 #define PF_HIDA(_i)			(0x00085000 + ((_i) * 4))
 #define PF_HIDA_2(_i)			(0x00085020 + ((_i) * 4))
 #define PF_HIBA(_i)			(0x00084000 + ((_i) * 4))
 #define PF_HICR				0x00082048
 
+#define PF_HIDA_MAX_INDEX		15
+#define PF_HIBA_MAX_INDEX		1023
+
 #define PF_HICR_EN			BIT(0)
 #define PF_HICR_C			BIT(1)
 #define PF_HICR_SV			BIT(2)
 #define PF_HICR_EV			BIT(3)
 
+#define GL_HIDA(_i)			(0x00082000 + ((_i) * 4))
+#define GL_HIDA_2(_i)			(0x00082020 + ((_i) * 4))
+#define GL_HIBA(_i)			(0x00081000 + ((_i) * 4))
+#define GL_HICR				0x00082040
+
+#define GL_HIDA_MAX_INDEX		15
+#define GL_HIBA_MAX_INDEX		1023
+
+#define GL_HICR_C			BIT(1)
+#define GL_HICR_SV			BIT(2)
+#define GL_HICR_EV			BIT(3)
+
+#define GL_HICR_EN			0x00082044
+
+#define GL_HICR_EN_CHECK		BIT(0)
+
 /* Admin Command Interface (ACI) defines */
 /* Defines that help manage the driver vs FW API checks.
  */
@@ -260,6 +368,14 @@
 /* [ms] timeout of waiting for resource release */
 #define IXGBE_ACI_RELEASE_RES_TIMEOUT		10000
 
+/* Timestamp spacing for Tools ACI: queue is active if spacing is within the range [LO..HI] */
+#define IXGBE_TOOLS_ACI_ACTIVE_STAMP_SPACING_LO      0
+#define IXGBE_TOOLS_ACI_ACTIVE_STAMP_SPACING_HI      200
+
+/* Timestamp spacing for Tools ACI: queue is expired if spacing is outside the range [LO..HI] */
+#define IXGBE_TOOLS_ACI_EXPIRED_STAMP_SPACING_LO     -5
+#define IXGBE_TOOLS_ACI_EXPIRED_STAMP_SPACING_HI     205
+
 /* FW defined boundary for a large buffer, 4k >= Large buffer > 512 bytes */
 #define IXGBE_ACI_LG_BUF		512
 
@@ -488,6 +604,8 @@ IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_exp_err);
 
 /* FW update timeout definitions are in milliseconds */
 #define IXGBE_NVM_TIMEOUT		180000
+#define IXGBE_CHANGE_LOCK_TIMEOUT	1000
+#define IXGBE_GLOBAL_CFG_LOCK_TIMEOUT	3000
 
 enum ixgbe_aci_res_access_type {
 	IXGBE_RES_READ = 1,
@@ -1234,10 +1352,48 @@ struct ixgbe_aci_cmd_nvm {
 };
 
 /* NVM Module_Type ID, needed offset and read_len for struct ixgbe_aci_cmd_nvm. */
+#define IXGBE_ACI_NVM_SECTOR_UNIT		4096 /* In Bytes */
+#define IXGBE_ACI_NVM_WORD_UNIT			2 /* In Bytes */
+
 #define IXGBE_ACI_NVM_START_POINT		0
+#define IXGBE_ACI_NVM_EMP_SR_PTR_OFFSET		0x90
+#define IXGBE_ACI_NVM_EMP_SR_PTR_RD_LEN		2 /* In Bytes */
+#define IXGBE_ACI_NVM_EMP_SR_PTR_M		MAKEMASK(0x7FFF, 0)
+#define IXGBE_ACI_NVM_EMP_SR_PTR_TYPE_S		15
+#define IXGBE_ACI_NVM_EMP_SR_PTR_TYPE_M		BIT(15)
+#define IXGBE_ACI_NVM_EMP_SR_PTR_TYPE_SECTOR	1
+
+#define IXGBE_ACI_NVM_LLDP_CFG_PTR_OFFSET	0x46
+#define IXGBE_ACI_NVM_LLDP_CFG_HEADER_LEN	2 /* In Bytes */
+#define IXGBE_ACI_NVM_LLDP_CFG_PTR_RD_LEN	2 /* In Bytes */
+
+#define IXGBE_ACI_NVM_LLDP_PRESERVED_MOD_ID		0x129
+#define IXGBE_ACI_NVM_CUR_LLDP_PERSIST_RD_OFFSET	2 /* In Bytes */
+#define IXGBE_ACI_NVM_LLDP_STATUS_M			MAKEMASK(0xF, 0)
+#define IXGBE_ACI_NVM_LLDP_STATUS_M_LEN			4 /* In Bits */
+#define IXGBE_ACI_NVM_LLDP_STATUS_RD_LEN		4 /* In Bytes */
+
+#define IXGBE_ACI_NVM_MINSREV_MOD_ID		0x130
 
 IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_nvm);
 
+/* Used for reading and writing MinSRev using 0x0701 and 0x0703. Note that the
+ * type field is excluded from the section when reading and writing from
+ * a module using the module_typeid field with these AQ commands.
+ */
+struct ixgbe_aci_cmd_nvm_minsrev {
+	__le16 length;
+	__le16 validity;
+#define IXGBE_ACI_NVM_MINSREV_NVM_VALID		BIT(0)
+#define IXGBE_ACI_NVM_MINSREV_OROM_VALID	BIT(1)
+	__le16 nvm_minsrev_l;
+	__le16 nvm_minsrev_h;
+	__le16 orom_minsrev_l;
+	__le16 orom_minsrev_h;
+};
+
+IXGBE_CHECK_STRUCT_LEN(12, ixgbe_aci_cmd_nvm_minsrev);
+
 /* Used for 0x0704 as well as for 0x0705 commands */
 struct ixgbe_aci_cmd_nvm_cfg {
 	u8	cmd_flags;
@@ -1254,6 +1410,14 @@ struct ixgbe_aci_cmd_nvm_cfg {
 
 IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_nvm_cfg);
 
+struct ixgbe_aci_cmd_nvm_cfg_data {
+	__le16 field_id;
+	__le16 field_options;
+	__le16 field_value;
+};
+
+IXGBE_CHECK_STRUCT_LEN(6, ixgbe_aci_cmd_nvm_cfg_data);
+
 /* NVM Checksum Command (direct, 0x0706) */
 struct ixgbe_aci_cmd_nvm_checksum {
 	u8 flags;
@@ -1329,6 +1493,211 @@ struct ixgbe_aci_cmd_clear_port_alt_write {
 
 IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_clear_port_alt_write);
 
+/* Get CGU abilities command response data structure (indirect 0x0C61) */
+struct ixgbe_aci_cmd_get_cgu_abilities {
+	u8 num_inputs;
+	u8 num_outputs;
+	u8 pps_dpll_idx;
+	u8 synce_dpll_idx;
+	__le32 max_in_freq;
+	__le32 max_in_phase_adj;
+	__le32 max_out_freq;
+	__le32 max_out_phase_adj;
+	u8 cgu_part_num;
+	u8 rsvd[3];
+};
+
+IXGBE_CHECK_STRUCT_LEN(24, ixgbe_aci_cmd_get_cgu_abilities);
+
+#define IXGBE_ACI_NODE_HANDLE_VALID	BIT(10)
+#define IXGBE_ACI_NODE_HANDLE		MAKEMASK(0x3FF, 0)
+#define IXGBE_ACI_DRIVING_CLK_NUM_SHIFT	10
+#define IXGBE_ACI_DRIVING_CLK_NUM	MAKEMASK(0x3F, IXGBE_ACI_DRIVING_CLK_NUM_SHIFT)
+
+/* Set CGU input config (direct 0x0C62) */
+struct ixgbe_aci_cmd_set_cgu_input_config {
+	u8 input_idx;
+	u8 flags1;
+#define IXGBE_ACI_SET_CGU_IN_CFG_FLG1_UPDATE_FREQ	BIT(6)
+#define IXGBE_ACI_SET_CGU_IN_CFG_FLG1_UPDATE_DELAY	BIT(7)
+	u8 flags2;
+#define IXGBE_ACI_SET_CGU_IN_CFG_FLG2_INPUT_EN		BIT(5)
+#define IXGBE_ACI_SET_CGU_IN_CFG_FLG2_ESYNC_EN		BIT(6)
+	u8 rsvd;
+	__le32 freq;
+	__le32 phase_delay;
+	u8 rsvd2[2];
+	__le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_set_cgu_input_config);
+
+/* Get CGU input config response descriptor structure (direct 0x0C63) */
+struct ixgbe_aci_cmd_get_cgu_input_config {
+	u8 input_idx;
+	u8 status;
+#define IXGBE_ACI_GET_CGU_IN_CFG_STATUS_LOS		BIT(0)
+#define IXGBE_ACI_GET_CGU_IN_CFG_STATUS_SCM_FAIL	BIT(1)
+#define IXGBE_ACI_GET_CGU_IN_CFG_STATUS_CFM_FAIL	BIT(2)
+#define IXGBE_ACI_GET_CGU_IN_CFG_STATUS_GST_FAIL	BIT(3)
+#define IXGBE_ACI_GET_CGU_IN_CFG_STATUS_PFM_FAIL	BIT(4)
+#define IXGBE_ACI_GET_CGU_IN_CFG_STATUS_ESYNC_FAIL	BIT(6)
+#define IXGBE_ACI_GET_CGU_IN_CFG_STATUS_ESYNC_CAP	BIT(7)
+	u8 type;
+#define IXGBE_ACI_GET_CGU_IN_CFG_TYPE_READ_ONLY		BIT(0)
+#define IXGBE_ACI_GET_CGU_IN_CFG_TYPE_GPS		BIT(4)
+#define IXGBE_ACI_GET_CGU_IN_CFG_TYPE_EXTERNAL		BIT(5)
+#define IXGBE_ACI_GET_CGU_IN_CFG_TYPE_PHY		BIT(6)
+	u8 flags1;
+#define IXGBE_ACI_GET_CGU_IN_CFG_FLG1_PHASE_DELAY_SUPP	BIT(0)
+#define IXGBE_ACI_GET_CGU_IN_CFG_FLG1_1PPS_SUPP		BIT(2)
+#define IXGBE_ACI_GET_CGU_IN_CFG_FLG1_10MHZ_SUPP	BIT(3)
+#define IXGBE_ACI_GET_CGU_IN_CFG_FLG1_ANYFREQ		BIT(7)
+	__le32 freq;
+	__le32 phase_delay;
+	u8 flags2;
+#define IXGBE_ACI_GET_CGU_IN_CFG_FLG2_INPUT_EN		BIT(5)
+#define IXGBE_ACI_GET_CGU_IN_CFG_FLG2_ESYNC_EN		BIT(6)
+	u8 rsvd[1];
+	__le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_cgu_input_config);
+
+/* Set CGU output config (direct 0x0C64) */
+struct ixgbe_aci_cmd_set_cgu_output_config {
+	u8 output_idx;
+	u8 flags;
+#define IXGBE_ACI_SET_CGU_OUT_CFG_OUT_EN		BIT(0)
+#define IXGBE_ACI_SET_CGU_OUT_CFG_ESYNC_EN		BIT(1)
+#define IXGBE_ACI_SET_CGU_OUT_CFG_UPDATE_FREQ		BIT(2)
+#define IXGBE_ACI_SET_CGU_OUT_CFG_UPDATE_PHASE		BIT(3)
+#define IXGBE_ACI_SET_CGU_OUT_CFG_UPDATE_SRC_SEL	BIT(4)
+	u8 src_sel;
+#define IXGBE_ACI_SET_CGU_OUT_CFG_DPLL_SRC_SEL		MAKEMASK(0x1F, 0)
+	u8 rsvd;
+	__le32 freq;
+	__le32 phase_delay;
+	u8 rsvd2[2];
+	__le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_set_cgu_output_config);
+
+/* Get CGU output config (direct 0x0C65) */
+struct ixgbe_aci_cmd_get_cgu_output_config {
+	u8 output_idx;
+	u8 flags;
+#define IXGBE_ACI_GET_CGU_OUT_CFG_OUT_EN		BIT(0)
+#define IXGBE_ACI_GET_CGU_OUT_CFG_ESYNC_EN		BIT(1)
+#define IXGBE_ACI_GET_CGU_OUT_CFG_ESYNC_ABILITY		BIT(2)
+	u8 src_sel;
+#define IXGBE_ACI_GET_CGU_OUT_CFG_DPLL_SRC_SEL_SHIFT	0
+#define IXGBE_ACI_GET_CGU_OUT_CFG_DPLL_SRC_SEL \
+	MAKEMASK(0x1F, IXGBE_ACI_GET_CGU_OUT_CFG_DPLL_SRC_SEL_SHIFT)
+#define IXGBE_ACI_GET_CGU_OUT_CFG_DPLL_MODE_SHIFT	5
+#define IXGBE_ACI_GET_CGU_OUT_CFG_DPLL_MODE \
+	MAKEMASK(0x7, IXGBE_ACI_GET_CGU_OUT_CFG_DPLL_MODE_SHIFT)
+	u8 rsvd;
+	__le32 freq;
+	__le32 src_freq;
+	u8 rsvd2[2];
+	__le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_cgu_output_config);
+
+/* Get CGU DPLL status (direct 0x0C66) */
+struct ixgbe_aci_cmd_get_cgu_dpll_status {
+	u8 dpll_num;
+	u8 ref_state;
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_REF_SW_LOS		BIT(0)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_REF_SW_SCM		BIT(1)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_REF_SW_CFM		BIT(2)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_REF_SW_GST		BIT(3)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_REF_SW_PFM		BIT(4)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_FAST_LOCK_EN		BIT(5)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_REF_SW_ESYNC		BIT(6)
+	__le16 dpll_state;
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_LOCK		BIT(0)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_HO			BIT(1)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_HO_READY		BIT(2)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_FLHIT		BIT(5)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_PSLHIT		BIT(7)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_CLK_REF_SHIFT	8
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_CLK_REF_SEL		\
+	MAKEMASK(0x1F, IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_CLK_REF_SHIFT)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_MODE_SHIFT		13
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_MODE 		\
+	MAKEMASK(0x7, IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_MODE_SHIFT)
+	__le32 phase_offset_h;
+	__le32 phase_offset_l;
+	u8 eec_mode;
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_EEC_MODE_1		0xA
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_EEC_MODE_2		0xB
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_EEC_MODE_UNKNOWN		0xF
+	u8 rsvd[1];
+	__le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_cgu_dpll_status);
+
+/* Set CGU DPLL config (direct 0x0C67) */
+struct ixgbe_aci_cmd_set_cgu_dpll_config {
+	u8 dpll_num;
+	u8 ref_state;
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_REF_SW_LOS	BIT(0)
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_REF_SW_SCM	BIT(1)
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_REF_SW_CFM	BIT(2)
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_REF_SW_GST	BIT(3)
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_REF_SW_PFM	BIT(4)
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_REF_FLOCK_EN	BIT(5)
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_REF_SW_ESYNC	BIT(6)
+	u8 rsvd;
+	u8 config;
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_CLK_REF_SEL	MAKEMASK(0x1F, 0)
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_MODE		MAKEMASK(0x7, 5)
+	u8 rsvd2[8];
+	u8 eec_mode;
+	u8 rsvd3[1];
+	__le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_set_cgu_dpll_config);
+
+/* Set CGU reference priority (direct 0x0C68) */
+struct ixgbe_aci_cmd_set_cgu_ref_prio {
+	u8 dpll_num;
+	u8 ref_idx;
+	u8 ref_priority;
+	u8 rsvd[11];
+	__le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_set_cgu_ref_prio);
+
+/* Get CGU reference priority (direct 0x0C69) */
+struct ixgbe_aci_cmd_get_cgu_ref_prio {
+	u8 dpll_num;
+	u8 ref_idx;
+	u8 ref_priority; /* Valid only in response */
+	u8 rsvd[13];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_cgu_ref_prio);
+
+/* Get CGU info (direct 0x0C6A) */
+struct ixgbe_aci_cmd_get_cgu_info {
+	__le32 cgu_id;
+	__le32 cgu_cfg_ver;
+	__le32 cgu_fw_ver;
+	u8 node_part_num;
+	u8 dev_rev;
+	__le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_cgu_info);
+
 /* Debug Dump Internal Data (indirect 0xFF08) */
 struct ixgbe_aci_cmd_debug_dump_internals {
 	__le16 cluster_id; /* Expresses next cluster ID in response */
@@ -1694,6 +2063,16 @@ struct ixgbe_ts_dev_info {
 	u8 tmr1_ena;
 };
 
+#pragma pack(1)
+struct ixgbe_orom_civd_info {
+	u8 signature[4];	/* Must match ASCII '$CIV' characters */
+	u8 checksum;		/* Simple modulo 256 sum of all structure bytes must equal 0 */
+	__le32 combo_ver;	/* Combo Image Version number */
+	u8 combo_name_len;	/* Length of the unicode combo image version string, max of 32 */
+	__le16 combo_name[32];	/* Unicode string representing the Combo Image version */
+};
+#pragma pack()
+
 /* Function specific capabilities */
 struct ixgbe_hw_func_caps {
 	struct ixgbe_hw_common_caps common_cap;
@@ -1724,6 +2103,14 @@ struct ixgbe_aci_info {
 	struct ixgbe_lock lock;		/* admin command interface lock */
 };
 
+/* Minimum Security Revision information */
+struct ixgbe_minsrev_info {
+	u32 nvm;
+	u32 orom;
+	u8 nvm_valid : 1;
+	u8 orom_valid : 1;
+};
+
 /* Enumeration of which flash bank is desired to read from, either the active
  * bank or the inactive bank. Used to abstract 1st and 2nd bank notion from
  * code which just wants to read the active or inactive flash bank.
@@ -1781,4 +2168,19 @@ struct ixgbe_flash_info {
 	u8 blank_nvm_mode;			/* is NVM empty (no FW present) */
 };
 
+#define IXGBE_NVM_CMD_READ		0x0000000B
+#define IXGBE_NVM_CMD_WRITE		0x0000000C
+
+/* NVM Access command */
+struct ixgbe_nvm_access_cmd {
+	u32 command;		/* NVM command: READ or WRITE */
+	u32 offset;			/* Offset to read/write, in bytes */
+	u32 data_size;		/* Size of data field, in bytes */
+};
+
+/* NVM Access data */
+struct ixgbe_nvm_access_data {
+	u32 regval;			/* Storage for register value */
+};
+
 #endif /* _IXGBE_TYPE_E610_H_ */
