[07/10] net/atlantic: fix link configuration
Checks
Commit Message
In case link speed is re configured after port start, it does not
takes the requested speed value, but instead just sets full autoneg
mask.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
---
drivers/net/atlantic/atl_ethdev.c | 44 ++++++++++++++-----------------
1 file changed, 20 insertions(+), 24 deletions(-)
@@ -465,8 +465,6 @@ atl_dev_start(struct rte_eth_dev *dev)
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
uint32_t intr_vector = 0;
- uint32_t *link_speeds;
- uint32_t speed = 0;
int status;
int err;
@@ -543,6 +541,8 @@ atl_dev_start(struct rte_eth_dev *dev)
goto error;
}
+ err = atl_dev_set_link_up(dev);
+
err = hw->aq_fw_ops->update_link_status(hw);
if (err)
@@ -550,26 +550,6 @@ atl_dev_start(struct rte_eth_dev *dev)
dev->data->dev_link.link_status = hw->aq_link_status.mbps != 0;
- link_speeds = &dev->data->dev_conf.link_speeds;
-
- speed = 0x0;
-
- if (*link_speeds == ETH_LINK_SPEED_AUTONEG) {
- speed = hw->aq_nic_cfg->link_speed_msk;
- } else {
- if (*link_speeds & ETH_LINK_SPEED_10G)
- speed |= AQ_NIC_RATE_10G;
- if (*link_speeds & ETH_LINK_SPEED_5G)
- speed |= AQ_NIC_RATE_5G;
- if (*link_speeds & ETH_LINK_SPEED_1G)
- speed |= AQ_NIC_RATE_1G;
- if (*link_speeds & ETH_LINK_SPEED_2_5G)
- speed |= AQ_NIC_RATE_2G5;
- if (*link_speeds & ETH_LINK_SPEED_100M)
- speed |= AQ_NIC_RATE_100M;
- }
-
- err = hw->aq_fw_ops->set_link_speed(hw, speed);
if (err)
goto error;
@@ -657,9 +637,25 @@ static int
atl_dev_set_link_up(struct rte_eth_dev *dev)
{
struct aq_hw_s *hw = ATL_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint32_t link_speeds = dev->data->dev_conf.link_speeds;
+ uint32_t speed_mask = 0;
+
+ if (link_speeds == ETH_LINK_SPEED_AUTONEG) {
+ speed_mask = hw->aq_nic_cfg->link_speed_msk;
+ } else {
+ if (link_speeds & ETH_LINK_SPEED_10G)
+ speed_mask |= AQ_NIC_RATE_10G;
+ if (link_speeds & ETH_LINK_SPEED_5G)
+ speed_mask |= AQ_NIC_RATE_5G;
+ if (link_speeds & ETH_LINK_SPEED_1G)
+ speed_mask |= AQ_NIC_RATE_1G;
+ if (link_speeds & ETH_LINK_SPEED_2_5G)
+ speed_mask |= AQ_NIC_RATE_2G5;
+ if (link_speeds & ETH_LINK_SPEED_100M)
+ speed_mask |= AQ_NIC_RATE_100M;
+ }
- return hw->aq_fw_ops->set_link_speed(hw,
- hw->aq_nic_cfg->link_speed_msk);
+ return hw->aq_fw_ops->set_link_speed(hw, speed_mask);
}
/*