diff mbox series

[02/24] net/axgbe: remove field of SFP diagnostic support

Message ID 20240412125249.10625-2-VenkatKumar.Ande@amd.com (mailing list archive)
State Changes Requested, archived
Delegated to: Ferruh Yigit
Headers
Series [01/24] net/axgbe: remove use of comm_owned field |

Checks

Context Check Description
ci/checkpatch success coding style OK

Commit Message

Venkat Kumar Ande April 12, 2024, 12:52 p.m. UTC 
The driver currently sets an indication of whether the SFP supports, and
that the driver can obtain, diagnostics data.  This isn't currently used
by the driver.  Remove this field and the logic supporting it.

Signed-off-by: Venkat Kumar Ande <VenkatKumar.Ande@amd.com>
---
 drivers/net/axgbe/axgbe_phy_impl.c | 10 ----------
 1 file changed, 10 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/axgbe/axgbe_phy_impl.c b/drivers/net/axgbe/axgbe_phy_impl.c
index 70e7c56439..e1b926d48a 100644
--- a/drivers/net/axgbe/axgbe_phy_impl.c
+++ b/drivers/net/axgbe/axgbe_phy_impl.c
@@ -220,7 +220,6 @@  struct axgbe_phy_data {
 	unsigned int sfp_rx_los;
 	unsigned int sfp_tx_fault;
 	unsigned int sfp_mod_absent;
-	unsigned int sfp_diags;
 	unsigned int sfp_changed;
 	unsigned int sfp_phy_avail;
 	unsigned int sfp_cable_len;
@@ -701,14 +700,6 @@  static int axgbe_phy_sfp_read_eeprom(struct axgbe_port *pdata)
 	if (memcmp(&phy_data->sfp_eeprom, &sfp_eeprom, sizeof(sfp_eeprom))) {
 		phy_data->sfp_changed = 1;
 		memcpy(&phy_data->sfp_eeprom, &sfp_eeprom, sizeof(sfp_eeprom));
-
-		if (sfp_eeprom.extd[AXGBE_SFP_EXTD_SFF_8472]) {
-			uint8_t diag_type;
-			diag_type = sfp_eeprom.extd[AXGBE_SFP_EXTD_DIAG];
-
-			if (!(diag_type & AXGBE_SFP_EXTD_DIAG_ADDR_CHANGE))
-				phy_data->sfp_diags = 1;
-		}
 	} else {
 		phy_data->sfp_changed = 0;
 	}
@@ -769,7 +760,6 @@  static void axgbe_phy_sfp_reset(struct axgbe_phy_data *phy_data)
 	phy_data->sfp_rx_los = 0;
 	phy_data->sfp_tx_fault = 0;
 	phy_data->sfp_mod_absent = 1;
-	phy_data->sfp_diags = 0;
 	phy_data->sfp_base = AXGBE_SFP_BASE_UNKNOWN;
 	phy_data->sfp_cable = AXGBE_SFP_CABLE_UNKNOWN;
 	phy_data->sfp_speed = AXGBE_SFP_SPEED_UNKNOWN;