[05/11] net/hns3: fix mbuf leak when start rxq in resetting
Checks
Commit Message
From: Chengwen Feng <fengchengwen@huawei.com>
In the reset restore-conf phase, the reset process will allocate for
the Rx ring mbufs unconditionlly.
And the rte_eth_dev_rx_queue_start() will also allocate for the Rx ring
mbufs unconditionlly.
So if the rte_eth_dev_rx_queue_start() is invoked before restore-conf
phase, then the mbufs allocated by rte_eth_dev_rx_queue_start() will
leak.
Because the hw->reset.resetting was always true during the phases from
stop-service to restore-conf, so fix it by returning an error if the
hw->reset.resetting is set.
This patch adds the above logic in both rx_queue_start/rx_queue_stop/
tx_queue_start/tx_queue_stop ops.
Fixes: fa29fe45a7b4 ("net/hns3: support queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
---
drivers/net/hns3/hns3_rxtx.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
@@ -4523,6 +4523,13 @@ hns3_dev_rx_queue_start(struct rte_eth_dev *dev, uint16_t rx_queue_id)
return -ENOTSUP;
rte_spinlock_lock(&hw->lock);
+
+ if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED)) {
+ hns3_err(hw, "fail to start Rx queue during resetting.");
+ rte_spinlock_unlock(&hw->lock);
+ return -EIO;
+ }
+
ret = hns3_reset_queue(hw, rx_queue_id, HNS3_RING_TYPE_RX);
if (ret) {
hns3_err(hw, "fail to reset Rx queue %u, ret = %d.",
@@ -4569,6 +4576,13 @@ hns3_dev_rx_queue_stop(struct rte_eth_dev *dev, uint16_t rx_queue_id)
return -ENOTSUP;
rte_spinlock_lock(&hw->lock);
+
+ if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED)) {
+ hns3_err(hw, "fail to stop Rx queue during resetting.");
+ rte_spinlock_unlock(&hw->lock);
+ return -EIO;
+ }
+
hns3_enable_rxq(rxq, false);
hns3_rx_queue_release_mbufs(rxq);
@@ -4591,6 +4605,13 @@ hns3_dev_tx_queue_start(struct rte_eth_dev *dev, uint16_t tx_queue_id)
return -ENOTSUP;
rte_spinlock_lock(&hw->lock);
+
+ if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED)) {
+ hns3_err(hw, "fail to start Tx queue during resetting.");
+ rte_spinlock_unlock(&hw->lock);
+ return -EIO;
+ }
+
ret = hns3_reset_queue(hw, tx_queue_id, HNS3_RING_TYPE_TX);
if (ret) {
hns3_err(hw, "fail to reset Tx queue %u, ret = %d.",
@@ -4617,6 +4638,13 @@ hns3_dev_tx_queue_stop(struct rte_eth_dev *dev, uint16_t tx_queue_id)
return -ENOTSUP;
rte_spinlock_lock(&hw->lock);
+
+ if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED)) {
+ hns3_err(hw, "fail to stop Tx queue during resetting.");
+ rte_spinlock_unlock(&hw->lock);
+ return -EIO;
+ }
+
hns3_enable_txq(txq, false);
hns3_tx_queue_release_mbufs(txq);
/*