Add flag ACC101_HARQ_PRUNING_OPTIMIZATION to limit cases when HARQ
pruning is valid.
Signed-off-by: Hernan Vargas <hernan.vargas@intel.com>
---
drivers/baseband/acc100/rte_acc100_pmd.c | 52 +++++++++++++++++++-----
1 file changed, 41 insertions(+), 11 deletions(-)
@@ -1373,17 +1373,23 @@ acc100_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct acc100_fcw_ld *fcw,
harq_index = hq_index(op->ldpc_dec.harq_combined_output.offset);
#ifdef ACC100_EXT_MEM
/* Limit cases when HARQ pruning is valid */
+#ifdef ACC100_HARQ_PRUNING_OPTIMIZATION
harq_prun = ((op->ldpc_dec.harq_combined_output.offset %
- ACC100_HARQ_OFFSET) == 0) &&
- (op->ldpc_dec.harq_combined_output.offset <= UINT16_MAX
- * ACC100_HARQ_OFFSET);
+ ACC100_HARQ_OFFSET) == 0);
+#endif
#endif
if (fcw->hcin_en > 0) {
harq_in_length = op->ldpc_dec.harq_combined_input.length;
if (fcw->hcin_decomp_mode > 0)
harq_in_length = harq_in_length * 8 / 6;
- harq_in_length = RTE_ALIGN(harq_in_length, 64);
- if ((harq_layout[harq_index].offset > 0) & harq_prun) {
+ harq_in_length = RTE_MIN(harq_in_length, op->ldpc_dec.n_cb
+ - op->ldpc_dec.n_filler);
+ /* Alignment on next 64B - Already enforced from HC output */
+ harq_in_length = RTE_ALIGN_FLOOR(harq_in_length, 64);
+ /* Stronger alignment requirement when in decompression mode */
+ if (fcw->hcin_decomp_mode > 0)
+ harq_in_length = RTE_ALIGN_FLOOR(harq_in_length, 256);
+ if ((harq_layout[harq_index].offset > 0) && harq_prun) {
rte_bbdev_log_debug("HARQ IN offset unexpected for now\n");
fcw->hcin_size0 = harq_layout[harq_index].size0;
fcw->hcin_offset = harq_layout[harq_index].offset;
@@ -1458,6 +1464,7 @@ acc101_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct acc100_fcw_ld *fcw,
uint16_t harq_out_length, harq_in_length, ncb_p, k0_p, parity_offset;
uint32_t harq_index;
uint32_t l;
+ bool harq_prun = false;
fcw->qm = op->ldpc_dec.q_m;
fcw->nfiller = op->ldpc_dec.n_filler;
@@ -1503,6 +1510,13 @@ acc101_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct acc100_fcw_ld *fcw,
fcw->llr_pack_mode = check_bit(op->ldpc_dec.op_flags,
RTE_BBDEV_LDPC_LLR_COMPRESSION);
harq_index = hq_index(op->ldpc_dec.harq_combined_output.offset);
+ #ifdef ACC100_EXT_MEM
+ /* Limit cases when HARQ pruning is valid */
+#ifdef ACC101_HARQ_PRUNING_OPTIMIZATION
+ harq_prun = ((op->ldpc_dec.harq_combined_output.offset %
+ ACC101_HARQ_OFFSET) == 0);
+#endif
+#endif
if (fcw->hcin_en > 0) {
harq_in_length = op->ldpc_dec.harq_combined_input.length;
if (fcw->hcin_decomp_mode > 0)
@@ -1511,9 +1525,17 @@ acc101_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct acc100_fcw_ld *fcw,
- op->ldpc_dec.n_filler);
/* Alignment on next 64B - Already enforced from HC output */
harq_in_length = RTE_ALIGN_FLOOR(harq_in_length, 64);
- fcw->hcin_size0 = harq_in_length;
- fcw->hcin_offset = 0;
- fcw->hcin_size1 = 0;
+ if ((harq_layout[harq_index].offset > 0) && harq_prun) {
+ rte_bbdev_log_debug("HARQ IN offset unexpected for now\n");
+ fcw->hcin_size0 = harq_layout[harq_index].size0;
+ fcw->hcin_offset = harq_layout[harq_index].offset;
+ fcw->hcin_size1 = harq_in_length -
+ harq_layout[harq_index].offset;
+ } else {
+ fcw->hcin_size0 = harq_in_length;
+ fcw->hcin_offset = 0;
+ fcw->hcin_size1 = 0;
+ }
} else {
fcw->hcin_size0 = 0;
fcw->hcin_offset = 0;
@@ -1554,9 +1576,17 @@ acc101_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct acc100_fcw_ld *fcw,
harq_out_length = RTE_MIN(harq_out_length, ncb_p);
/* Alignment on next 64B */
harq_out_length = RTE_ALIGN_CEIL(harq_out_length, 64);
- fcw->hcout_size0 = harq_out_length;
- fcw->hcout_size1 = 0;
- fcw->hcout_offset = 0;
+ if ((k0_p > fcw->hcin_size0 + ACC100_HARQ_OFFSET_THRESHOLD) &&
+ harq_prun) {
+ fcw->hcout_size0 = (uint16_t) fcw->hcin_size0;
+ fcw->hcout_offset = k0_p & 0xFFC0;
+ fcw->hcout_size1 = harq_out_length - fcw->hcout_offset;
+ } else {
+ fcw->hcout_size0 = harq_out_length;
+ fcw->hcout_size1 = 0;
+ fcw->hcout_offset = 0;
+ }
+
harq_layout[harq_index].offset = fcw->hcout_offset;
harq_layout[harq_index].size0 = fcw->hcout_size0;
} else {