diff --git a/examples/pipeline/examples/ethdev.io b/examples/pipeline/examples/ethdev.io
new file mode 100644
index 0000000000..cf2f3e20bd
--- /dev/null
+++ b/examples/pipeline/examples/ethdev.io
@@ -0,0 +1,27 @@
+; SPDX-License-Identifier: BSD-3-Clause
+; Copyright(c) 2022 Intel Corporation
+
+;
+; Pipeline packet mirroring.
+;
+mirroring slots 4 sessions 64
+
+;
+; Pipeline input ports.
+;
+; Note: Customize the parameters below to match your setup.
+;
+port in 0 ethdev 0000:18:00.0 rxq 0 bsz 32
+port in 1 ethdev 0000:18:00.1 rxq 0 bsz 32
+port in 2 ethdev 0000:3b:00.0 rxq 0 bsz 32
+port in 3 ethdev 0000:3b:00.1 rxq 0 bsz 32
+
+;
+; Pipeline output ports.
+;
+; Note: Customize the parameters below to match your setup.
+;
+port out 0 ethdev 0000:18:00.0 txq 0 bsz 32
+port out 1 ethdev 0000:18:00.1 txq 0 bsz 32
+port out 2 ethdev 0000:3b:00.0 txq 0 bsz 32
+port out 3 ethdev 0000:3b:00.1 txq 0 bsz 32
diff --git a/examples/pipeline/examples/fib.cli b/examples/pipeline/examples/fib.cli
index 93ab2b08f8..4e30c1320f 100644
--- a/examples/pipeline/examples/fib.cli
+++ b/examples/pipeline/examples/fib.cli
@@ -1,38 +1,38 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2020 Intel Corporation
 
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/fib.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
+
 ;
-; Customize the LINK parameters to match your setup.
+; Pipeline code generation & shared object library build.
 ;
-mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
-
-link LINK0 dev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK1 dev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK2 dev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK3 dev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+pipeline codegen ./examples/pipeline/examples/fib.spec /tmp/fib.c
+pipeline libbuild /tmp/fib.c /tmp/fib.so
 
 ;
-; PIPELINE0 setup.
+; List of DPDK devices.
 ;
-pipeline PIPELINE0 create 0
-
-pipeline PIPELINE0 port in 0 link LINK0 rxq 0 bsz 32
-pipeline PIPELINE0 port in 1 link LINK1 rxq 0 bsz 32
-pipeline PIPELINE0 port in 2 link LINK2 rxq 0 bsz 32
-pipeline PIPELINE0 port in 3 link LINK3 rxq 0 bsz 32
-
-pipeline PIPELINE0 port out 0 link LINK0 txq 0 bsz 32
-pipeline PIPELINE0 port out 1 link LINK1 txq 0 bsz 32
-pipeline PIPELINE0 port out 2 link LINK2 txq 0 bsz 32
-pipeline PIPELINE0 port out 3 link LINK3 txq 0 bsz 32
+; Note: Customize the parameters below to match your setup.
+;
+mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
+ethdev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
 
-pipeline PIPELINE0 build ./examples/pipeline/examples/fib.spec
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/fib.so io ./examples/pipeline/examples/ethdev.io numa 0
 
 ;
 ; Initial set of table entries.
 ;
-; The table entries can later be updated at run-time through the CLI commands. Once the application
-; has been successfully started, the command to get the CLI prompt is: telnet 0.0.0.0 8086.
+; The table entries can later be updated at run-time through the CLI commands.
 ;
 pipeline PIPELINE0 table routing_table add ./examples/pipeline/examples/fib_routing_table.txt
 pipeline PIPELINE0 selector nexthop_group_table group add
diff --git a/examples/pipeline/examples/hash_func.cli b/examples/pipeline/examples/hash_func.cli
index d65cd62d17..b2e219e4c9 100644
--- a/examples/pipeline/examples/hash_func.cli
+++ b/examples/pipeline/examples/hash_func.cli
@@ -1,32 +1,33 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2022 Intel Corporation
 
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/hash_func.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
+
 ;
-; Customize the LINK parameters to match your setup.
+; Pipeline code generation & shared object library build.
 ;
-mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
-
-link LINK0 dev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK1 dev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK2 dev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK3 dev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+pipeline codegen ./examples/pipeline/examples/hash_func.spec /tmp/hash_func.c
+pipeline libbuild /tmp/hash_func.c /tmp/hash_func.so
 
 ;
-; PIPELINE0 setup.
+; List of DPDK devices.
 ;
-pipeline PIPELINE0 create 0
-
-pipeline PIPELINE0 port in 0 link LINK0 rxq 0 bsz 32
-pipeline PIPELINE0 port in 1 link LINK1 rxq 0 bsz 32
-pipeline PIPELINE0 port in 2 link LINK2 rxq 0 bsz 32
-pipeline PIPELINE0 port in 3 link LINK3 rxq 0 bsz 32
-
-pipeline PIPELINE0 port out 0 link LINK0 txq 0 bsz 32
-pipeline PIPELINE0 port out 1 link LINK1 txq 0 bsz 32
-pipeline PIPELINE0 port out 2 link LINK2 txq 0 bsz 32
-pipeline PIPELINE0 port out 3 link LINK3 txq 0 bsz 32
+; Note: Customize the parameters below to match your setup.
+;
+mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
+ethdev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
 
-pipeline PIPELINE0 build ./examples/pipeline/examples/hash_func.spec
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/hash_func.so io ./examples/pipeline/examples/ethdev.io numa 0
 
 ;
 ; Pipelines-to-threads mapping.
diff --git a/examples/pipeline/examples/l2fwd.cli b/examples/pipeline/examples/l2fwd.cli
index d89caf2d0a..27e37021b9 100644
--- a/examples/pipeline/examples/l2fwd.cli
+++ b/examples/pipeline/examples/l2fwd.cli
@@ -1,25 +1,35 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2020 Intel Corporation
 
-mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
-
-link LINK0 dev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK1 dev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK2 dev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK3 dev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/l2fwd.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
 
-pipeline PIPELINE0 create 0
+;
+; Pipeline code generation & shared object library build.
+;
+pipeline codegen ./examples/pipeline/examples/l2fwd.spec /tmp/l2fwd.c
+pipeline libbuild /tmp/l2fwd.c /tmp/l2fwd.so
 
-pipeline PIPELINE0 port in 0 link LINK0 rxq 0 bsz 32
-pipeline PIPELINE0 port in 1 link LINK1 rxq 0 bsz 32
-pipeline PIPELINE0 port in 2 link LINK2 rxq 0 bsz 32
-pipeline PIPELINE0 port in 3 link LINK3 rxq 0 bsz 32
-
-pipeline PIPELINE0 port out 0 link LINK0 txq 0 bsz 32
-pipeline PIPELINE0 port out 1 link LINK1 txq 0 bsz 32
-pipeline PIPELINE0 port out 2 link LINK2 txq 0 bsz 32
-pipeline PIPELINE0 port out 3 link LINK3 txq 0 bsz 32
+;
+; List of DPDK devices.
+;
+; Note: Customize the parameters below to match your setup.
+;
+mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
+ethdev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
 
-pipeline PIPELINE0 build ./examples/pipeline/examples/l2fwd.spec
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/l2fwd.so io ./examples/pipeline/examples/ethdev.io numa 0
 
+;
+; Pipelines-to-threads mapping.
+;
 thread 1 pipeline PIPELINE0 enable
diff --git a/examples/pipeline/examples/l2fwd_macswp.cli b/examples/pipeline/examples/l2fwd_macswp.cli
index 0f2a89ac5b..11bb4543b9 100644
--- a/examples/pipeline/examples/l2fwd_macswp.cli
+++ b/examples/pipeline/examples/l2fwd_macswp.cli
@@ -1,25 +1,35 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2020 Intel Corporation
 
-mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
-
-link LINK0 dev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK1 dev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK2 dev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK3 dev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/l2fwd_macswp.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
 
-pipeline PIPELINE0 create 0
+;
+; Pipeline code generation & shared object library build.
+;
+pipeline codegen ./examples/pipeline/examples/l2fwd_macswp.spec /tmp/l2fwd_macswp.c
+pipeline libbuild /tmp/l2fwd_macswp.c /tmp/l2fwd_macswp.so
 
-pipeline PIPELINE0 port in 0 link LINK0 rxq 0 bsz 32
-pipeline PIPELINE0 port in 1 link LINK1 rxq 0 bsz 32
-pipeline PIPELINE0 port in 2 link LINK2 rxq 0 bsz 32
-pipeline PIPELINE0 port in 3 link LINK3 rxq 0 bsz 32
-
-pipeline PIPELINE0 port out 0 link LINK0 txq 0 bsz 32
-pipeline PIPELINE0 port out 1 link LINK1 txq 0 bsz 32
-pipeline PIPELINE0 port out 2 link LINK2 txq 0 bsz 32
-pipeline PIPELINE0 port out 3 link LINK3 txq 0 bsz 32
+;
+; List of DPDK devices.
+;
+; Note: Customize the parameters below to match your setup.
+;
+mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
+ethdev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
 
-pipeline PIPELINE0 build ./examples/pipeline/examples/l2fwd_macswp.spec
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/l2fwd_macswp.so io ./examples/pipeline/examples/ethdev.io numa 0
 
+;
+; Pipelines-to-threads mapping.
+;
 thread 1 pipeline PIPELINE0 enable
diff --git a/examples/pipeline/examples/l2fwd_macswp_pcap.cli b/examples/pipeline/examples/l2fwd_macswp_pcap.cli
index e9656fe3c2..8724dae3b0 100644
--- a/examples/pipeline/examples/l2fwd_macswp_pcap.cli
+++ b/examples/pipeline/examples/l2fwd_macswp_pcap.cli
@@ -1,20 +1,31 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2020 Intel Corporation
 
-mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
-
-pipeline PIPELINE0 create 0
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/l2fwd_macswp_pcap.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
 
-pipeline PIPELINE0 port in 0 source MEMPOOL0 ./examples/pipeline/examples/packet.pcap loop 1
-pipeline PIPELINE0 port in 1 source MEMPOOL0 ./examples/pipeline/examples/packet.pcap loop 1
-pipeline PIPELINE0 port in 2 source MEMPOOL0 ./examples/pipeline/examples/packet.pcap loop 1
-pipeline PIPELINE0 port in 3 source MEMPOOL0 ./examples/pipeline/examples/packet.pcap loop 1
+;
+; Pipeline code generation & shared object library build.
+;
+pipeline codegen ./examples/pipeline/examples/l2fwd_macswp.spec /tmp/l2fwd_macswp.c
+pipeline libbuild /tmp/l2fwd_macswp.c /tmp/l2fwd_macswp.so
 
-pipeline PIPELINE0 port out 0 sink none
-pipeline PIPELINE0 port out 1 sink none
-pipeline PIPELINE0 port out 2 sink none
-pipeline PIPELINE0 port out 3 sink none
+;
+; List of DPDK devices.
+;
+; Note: Customize the parameters below to match your setup.
+;
+mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
 
-pipeline PIPELINE0 build ./examples/pipeline/examples/l2fwd_macswp.spec
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/l2fwd_macswp.so io ./examples/pipeline/examples/pcap.io numa 0
 
+;
+; Pipelines-to-threads mapping.
+;
 thread 1 pipeline PIPELINE0 enable
diff --git a/examples/pipeline/examples/l2fwd_pcap.cli b/examples/pipeline/examples/l2fwd_pcap.cli
index 23fcb199f1..4db0a0dc56 100644
--- a/examples/pipeline/examples/l2fwd_pcap.cli
+++ b/examples/pipeline/examples/l2fwd_pcap.cli
@@ -1,20 +1,31 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2020 Intel Corporation
 
-mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
-
-pipeline PIPELINE0 create 0
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/l2fwd_pcap.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
 
-pipeline PIPELINE0 port in 0 source MEMPOOL0 ./examples/pipeline/examples/packet.pcap loop 1
-pipeline PIPELINE0 port in 1 source MEMPOOL0 ./examples/pipeline/examples/packet.pcap loop 1
-pipeline PIPELINE0 port in 2 source MEMPOOL0 ./examples/pipeline/examples/packet.pcap loop 1
-pipeline PIPELINE0 port in 3 source MEMPOOL0 ./examples/pipeline/examples/packet.pcap loop 1
+;
+; Pipeline code generation & shared object library build.
+;
+pipeline codegen ./examples/pipeline/examples/l2fwd.spec /tmp/l2fwd.c
+pipeline libbuild /tmp/l2fwd.c /tmp/l2fwd.so
 
-pipeline PIPELINE0 port out 0 sink none
-pipeline PIPELINE0 port out 1 sink none
-pipeline PIPELINE0 port out 2 sink none
-pipeline PIPELINE0 port out 3 sink none
+;
+; List of DPDK devices.
+;
+; Note: Customize the parameters below to match your setup.
+;
+mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
 
-pipeline PIPELINE0 build ./examples/pipeline/examples/l2fwd.spec
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/l2fwd.so io ./examples/pipeline/examples/pcap.io numa 0
 
+;
+; Pipelines-to-threads mapping.
+;
 thread 1 pipeline PIPELINE0 enable
diff --git a/examples/pipeline/examples/learner.cli b/examples/pipeline/examples/learner.cli
index 688ce34f34..6c8aa3921e 100644
--- a/examples/pipeline/examples/learner.cli
+++ b/examples/pipeline/examples/learner.cli
@@ -1,36 +1,35 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2020 Intel Corporation
 
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/learner.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
+
 ;
-; Customize the LINK parameters to match your setup.
+; Pipeline code generation & shared object library build.
 ;
-mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
-
-link LINK0 dev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK1 dev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK2 dev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK3 dev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+pipeline codegen ./examples/pipeline/examples/learner.spec /tmp/learner.c
+pipeline libbuild /tmp/learner.c /tmp/learner.so
 
 ;
-; PIPELINE0 setup.
+; List of DPDK devices.
 ;
-pipeline PIPELINE0 create 0
-
-pipeline PIPELINE0 port in 0 link LINK0 rxq 0 bsz 32
-pipeline PIPELINE0 port in 1 link LINK1 rxq 0 bsz 32
-pipeline PIPELINE0 port in 2 link LINK2 rxq 0 bsz 32
-pipeline PIPELINE0 port in 3 link LINK3 rxq 0 bsz 32
-
-pipeline PIPELINE0 port out 0 link LINK0 txq 0 bsz 32
-pipeline PIPELINE0 port out 1 link LINK1 txq 0 bsz 32
-pipeline PIPELINE0 port out 2 link LINK2 txq 0 bsz 32
-pipeline PIPELINE0 port out 3 link LINK3 txq 0 bsz 32
+; Note: Customize the parameters below to match your setup.
+;
+mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
+ethdev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
 
-pipeline PIPELINE0 build ./examples/pipeline/examples/learner.spec
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/learner.so io ./examples/pipeline/examples/ethdev.io numa 0
 
 ;
 ; Pipelines-to-threads mapping.
 ;
 thread 1 pipeline PIPELINE0 enable
-
-; Once the application has started, the command to get the CLI prompt is: telnet 0.0.0.0 8086
diff --git a/examples/pipeline/examples/meter.cli b/examples/pipeline/examples/meter.cli
index b29ed24022..c1b88c882a 100644
--- a/examples/pipeline/examples/meter.cli
+++ b/examples/pipeline/examples/meter.cli
@@ -1,31 +1,43 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2020 Intel Corporation
 
-; Example command line:
-;	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/meter.cli
-
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/meter.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
+
+;
+; Pipeline code generation & shared object library build.
+;
+pipeline codegen ./examples/pipeline/examples/meter.spec /tmp/meter.c
+pipeline libbuild /tmp/meter.c /tmp/meter.so
+
+;
+; List of DPDK devices.
+;
+; Note: Customize the parameters below to match your setup.
+;
 mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
-
-link LINK0 dev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK1 dev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK2 dev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK3 dev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-
-pipeline PIPELINE0 create 0
-
-pipeline PIPELINE0 port in 0 link LINK0 rxq 0 bsz 32
-pipeline PIPELINE0 port in 1 link LINK1 rxq 0 bsz 32
-pipeline PIPELINE0 port in 2 link LINK2 rxq 0 bsz 32
-pipeline PIPELINE0 port in 3 link LINK3 rxq 0 bsz 32
-
-pipeline PIPELINE0 port out 0 link LINK0 txq 0 bsz 32
-pipeline PIPELINE0 port out 1 link LINK1 txq 0 bsz 32
-pipeline PIPELINE0 port out 2 link LINK2 txq 0 bsz 32
-pipeline PIPELINE0 port out 3 link LINK3 txq 0 bsz 32
-
-pipeline PIPELINE0 build ./examples/pipeline/examples/meter.spec
-
+ethdev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/meter.so io ./examples/pipeline/examples/ethdev.io numa 0
+
+;
+; Initial set of table entries.
+;
+; The table entries can later be updated at run-time through the CLI commands.
+;
 pipeline PIPELINE0 meter profile platinum add cir 46000000 pir 138000000 cbs 1000000 pbs 1000000
 pipeline PIPELINE0 meter meters from 0 to 15 set profile platinum
 
+;
+; Pipelines-to-threads mapping.
+;
 thread 1 pipeline PIPELINE0 enable
diff --git a/examples/pipeline/examples/mirroring.cli b/examples/pipeline/examples/mirroring.cli
index 46d57db4ec..1d439e04d3 100644
--- a/examples/pipeline/examples/mirroring.cli
+++ b/examples/pipeline/examples/mirroring.cli
@@ -1,36 +1,38 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2022 Intel Corporation
 
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/mirroring.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
+
 ;
-; Customize the LINK parameters to match your setup.
+; Pipeline code generation & shared object library build.
 ;
-mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
-
-link LINK0 dev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK1 dev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK2 dev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK3 dev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+pipeline codegen ./examples/pipeline/examples/mirroring.spec /tmp/mirroring.c
+pipeline libbuild /tmp/mirroring.c /tmp/mirroring.so
 
 ;
-; PIPELINE0 setup.
+; List of DPDK devices.
 ;
-pipeline PIPELINE0 create 0
-pipeline PIPELINE0 mirror slots 4 sessions 16
-
-pipeline PIPELINE0 port in 0 link LINK0 rxq 0 bsz 32
-pipeline PIPELINE0 port in 1 link LINK1 rxq 0 bsz 32
-pipeline PIPELINE0 port in 2 link LINK2 rxq 0 bsz 32
-pipeline PIPELINE0 port in 3 link LINK3 rxq 0 bsz 32
-
-pipeline PIPELINE0 port out 0 link LINK0 txq 0 bsz 32
-pipeline PIPELINE0 port out 1 link LINK1 txq 0 bsz 32
-pipeline PIPELINE0 port out 2 link LINK2 txq 0 bsz 32
-pipeline PIPELINE0 port out 3 link LINK3 txq 0 bsz 32
+; Note: Customize the parameters below to match your setup.
+;
+mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
+ethdev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
 
-pipeline PIPELINE0 build ./examples/pipeline/examples/mirroring.spec
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/mirroring.so io ./examples/pipeline/examples/ethdev.io numa 0
 
 ;
-; Packet mirroring sessions.
+; Initial set of table entries.
+;
+; The table entries can later be updated at run-time through the CLI commands.
 ;
 pipeline PIPELINE0 mirror session 0 port 1 clone fast truncate 0
 pipeline PIPELINE0 mirror session 1 port 2 clone slow truncate 0
diff --git a/examples/pipeline/examples/pcap.io b/examples/pipeline/examples/pcap.io
new file mode 100644
index 0000000000..111f61afae
--- /dev/null
+++ b/examples/pipeline/examples/pcap.io
@@ -0,0 +1,27 @@
+; SPDX-License-Identifier: BSD-3-Clause
+; Copyright(c) 2022 Intel Corporation
+
+;
+; Pipeline packet mirroring.
+;
+mirroring slots 4 sessions 64
+
+;
+; Pipeline input ports.
+;
+; Note: Customize the parameters below to match your setup.
+;
+port in 0 source mempool MEMPOOL0 file ./examples/pipeline/examples/packet.pcap loop 1 packets 0
+port in 1 source mempool MEMPOOL0 file ./examples/pipeline/examples/packet.pcap loop 1 packets 0
+port in 2 source mempool MEMPOOL0 file ./examples/pipeline/examples/packet.pcap loop 1 packets 0
+port in 3 source mempool MEMPOOL0 file ./examples/pipeline/examples/packet.pcap loop 1 packets 0
+
+;
+; Pipeline output ports.
+;
+; Note: Customize the parameters below to match your setup.
+;
+port out 0 sink file none
+port out 1 sink file none
+port out 2 sink file none
+port out 3 sink file none
diff --git a/examples/pipeline/examples/recirculation.cli b/examples/pipeline/examples/recirculation.cli
index f855c5c327..52d0894f12 100644
--- a/examples/pipeline/examples/recirculation.cli
+++ b/examples/pipeline/examples/recirculation.cli
@@ -1,32 +1,33 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2022 Intel Corporation
 
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/recirculation.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
+
 ;
-; Customize the LINK parameters to match your setup.
+; Pipeline code generation & shared object library build.
 ;
-mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
-
-link LINK0 dev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK1 dev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK2 dev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK3 dev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+pipeline codegen ./examples/pipeline/examples/recirculation.spec /tmp/recirculation.c
+pipeline libbuild /tmp/recirculation.c /tmp/recirculation.so
 
 ;
-; PIPELINE0 setup.
+; List of DPDK devices.
 ;
-pipeline PIPELINE0 create 0
-
-pipeline PIPELINE0 port in 0 link LINK0 rxq 0 bsz 32
-pipeline PIPELINE0 port in 1 link LINK1 rxq 0 bsz 32
-pipeline PIPELINE0 port in 2 link LINK2 rxq 0 bsz 32
-pipeline PIPELINE0 port in 3 link LINK3 rxq 0 bsz 32
-
-pipeline PIPELINE0 port out 0 link LINK0 txq 0 bsz 32
-pipeline PIPELINE0 port out 1 link LINK1 txq 0 bsz 32
-pipeline PIPELINE0 port out 2 link LINK2 txq 0 bsz 32
-pipeline PIPELINE0 port out 3 link LINK3 txq 0 bsz 32
+; Note: Customize the parameters below to match your setup.
+;
+mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
+ethdev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
 
-pipeline PIPELINE0 build ./examples/pipeline/examples/recirculation.spec
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/recirculation.so io ./examples/pipeline/examples/ethdev.io numa 0
 
 ;
 ; Pipelines-to-threads mapping.
diff --git a/examples/pipeline/examples/registers.cli b/examples/pipeline/examples/registers.cli
index 8d026294cb..3516f76a5b 100644
--- a/examples/pipeline/examples/registers.cli
+++ b/examples/pipeline/examples/registers.cli
@@ -1,28 +1,35 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2020 Intel Corporation
 
-; Example command line:
-;	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/registers.cli
-
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/registers.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
+
+;
+; Pipeline code generation & shared object library build.
+;
+pipeline codegen ./examples/pipeline/examples/registers.spec /tmp/registers.c
+pipeline libbuild /tmp/registers.c /tmp/registers.so
+
+;
+; List of DPDK devices.
+;
+; Note: Customize the parameters below to match your setup.
+;
 mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
-
-link LINK0 dev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK1 dev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK2 dev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK3 dev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-
-pipeline PIPELINE0 create 0
-
-pipeline PIPELINE0 port in 0 link LINK0 rxq 0 bsz 32
-pipeline PIPELINE0 port in 1 link LINK1 rxq 0 bsz 32
-pipeline PIPELINE0 port in 2 link LINK2 rxq 0 bsz 32
-pipeline PIPELINE0 port in 3 link LINK3 rxq 0 bsz 32
-
-pipeline PIPELINE0 port out 0 link LINK0 txq 0 bsz 32
-pipeline PIPELINE0 port out 1 link LINK1 txq 0 bsz 32
-pipeline PIPELINE0 port out 2 link LINK2 txq 0 bsz 32
-pipeline PIPELINE0 port out 3 link LINK3 txq 0 bsz 32
-
-pipeline PIPELINE0 build ./examples/pipeline/examples/registers.spec
-
+ethdev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/registers.so io ./examples/pipeline/examples/ethdev.io numa 0
+
+;
+; Pipelines-to-threads mapping.
+;
 thread 1 pipeline PIPELINE0 enable
diff --git a/examples/pipeline/examples/selector.cli b/examples/pipeline/examples/selector.cli
index 123782c57b..f0e251b657 100644
--- a/examples/pipeline/examples/selector.cli
+++ b/examples/pipeline/examples/selector.cli
@@ -1,30 +1,45 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2020 Intel Corporation
 
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/selector.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
+
+;
+; Pipeline code generation & shared object library build.
+;
+pipeline codegen ./examples/pipeline/examples/selector.spec /tmp/selector.c
+pipeline libbuild /tmp/selector.c /tmp/selector.so
+
+;
+; List of DPDK devices.
+;
+; Note: Customize the parameters below to match your setup.
+;
 mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
-
-link LINK0 dev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK1 dev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK2 dev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK3 dev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-
-pipeline PIPELINE0 create 0
-
-pipeline PIPELINE0 port in 0 link LINK0 rxq 0 bsz 32
-pipeline PIPELINE0 port in 1 link LINK1 rxq 0 bsz 32
-pipeline PIPELINE0 port in 2 link LINK2 rxq 0 bsz 32
-pipeline PIPELINE0 port in 3 link LINK3 rxq 0 bsz 32
-
-pipeline PIPELINE0 port out 0 link LINK0 txq 0 bsz 32
-pipeline PIPELINE0 port out 1 link LINK1 txq 0 bsz 32
-pipeline PIPELINE0 port out 2 link LINK2 txq 0 bsz 32
-pipeline PIPELINE0 port out 3 link LINK3 txq 0 bsz 32
-
-pipeline PIPELINE0 build ./examples/pipeline/examples/selector.spec
-
+ethdev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/selector.so io ./examples/pipeline/examples/ethdev.io numa 0
+
+;
+; Initial set of table entries.
+;
+; The table entries can later be updated at run-time through the CLI commands.
+;
 pipeline PIPELINE0 selector s group add
 pipeline PIPELINE0 selector s group member add ./examples/pipeline/examples/selector.txt
 pipeline PIPELINE0 commit
 pipeline PIPELINE0 selector s show
 
+;
+; Pipelines-to-threads mapping.
+;
 thread 1 pipeline PIPELINE0 enable
diff --git a/examples/pipeline/examples/varbit.cli b/examples/pipeline/examples/varbit.cli
index 9caeb9ca26..0f89990471 100644
--- a/examples/pipeline/examples/varbit.cli
+++ b/examples/pipeline/examples/varbit.cli
@@ -1,32 +1,33 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2020 Intel Corporation
 
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/varbit.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
+
 ;
-; Customize the LINK parameters to match your setup.
+; Pipeline code generation & shared object library build.
 ;
-mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
-
-link LINK0 dev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK1 dev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK2 dev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK3 dev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+pipeline codegen ./examples/pipeline/examples/varbit.spec /tmp/varbit.c
+pipeline libbuild /tmp/varbit.c /tmp/varbit.so
 
 ;
-; PIPELINE0 setup.
+; List of DPDK devices.
 ;
-pipeline PIPELINE0 create 0
-
-pipeline PIPELINE0 port in 0 link LINK0 rxq 0 bsz 32
-pipeline PIPELINE0 port in 1 link LINK1 rxq 0 bsz 32
-pipeline PIPELINE0 port in 2 link LINK2 rxq 0 bsz 32
-pipeline PIPELINE0 port in 3 link LINK3 rxq 0 bsz 32
-
-pipeline PIPELINE0 port out 0 link LINK0 txq 0 bsz 32
-pipeline PIPELINE0 port out 1 link LINK1 txq 0 bsz 32
-pipeline PIPELINE0 port out 2 link LINK2 txq 0 bsz 32
-pipeline PIPELINE0 port out 3 link LINK3 txq 0 bsz 32
+; Note: Customize the parameters below to match your setup.
+;
+mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
+ethdev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
 
-pipeline PIPELINE0 build ./examples/pipeline/examples/varbit.spec
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/varbit.so io ./examples/pipeline/examples/ethdev.io numa 0
 
 ;
 ; Pipelines-to-threads mapping.
diff --git a/examples/pipeline/examples/vxlan.cli b/examples/pipeline/examples/vxlan.cli
index 444f3f7bd8..1fbd1be6e4 100644
--- a/examples/pipeline/examples/vxlan.cli
+++ b/examples/pipeline/examples/vxlan.cli
@@ -1,27 +1,43 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2020 Intel Corporation
 
-mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
-
-link LINK0 dev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK1 dev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK2 dev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
-link LINK3 dev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/vxlan.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
 
-pipeline PIPELINE0 create 0
+;
+; Pipeline code generation & shared object library build.
+;
+pipeline codegen ./examples/pipeline/examples/vxlan.spec /tmp/vxlan.c
+pipeline libbuild /tmp/vxlan.c /tmp/vxlan.so
 
-pipeline PIPELINE0 port in 0 link LINK0 rxq 0 bsz 32
-pipeline PIPELINE0 port in 1 link LINK1 rxq 0 bsz 32
-pipeline PIPELINE0 port in 2 link LINK2 rxq 0 bsz 32
-pipeline PIPELINE0 port in 3 link LINK3 rxq 0 bsz 32
+;
+; List of DPDK devices.
+;
+; Note: Customize the parameters below to match your setup.
+;
+mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
+ethdev 0000:18:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:18:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.0 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
+ethdev 0000:3b:00.1 rxq 1 128 MEMPOOL0 txq 1 512 promiscuous on
 
-pipeline PIPELINE0 port out 0 link LINK0 txq 0 bsz 32
-pipeline PIPELINE0 port out 1 link LINK1 txq 0 bsz 32
-pipeline PIPELINE0 port out 2 link LINK2 txq 0 bsz 32
-pipeline PIPELINE0 port out 3 link LINK3 txq 0 bsz 32
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/vxlan.so io ./examples/pipeline/examples/ethdev.io numa 0
 
-pipeline PIPELINE0 build ./examples/pipeline/examples/vxlan.spec
+;
+; Initial set of table entries.
+;
+; The table entries can later be updated at run-time through the CLI commands.
+;
 pipeline PIPELINE0 table vxlan_table add ./examples/pipeline/examples/vxlan_table.txt
 pipeline PIPELINE0 commit
 
+;
+; Pipelines-to-threads mapping.
+;
 thread 1 pipeline PIPELINE0 enable
diff --git a/examples/pipeline/examples/vxlan_pcap.cli b/examples/pipeline/examples/vxlan_pcap.cli
index 83fca8d0d9..adc7f73312 100644
--- a/examples/pipeline/examples/vxlan_pcap.cli
+++ b/examples/pipeline/examples/vxlan_pcap.cli
@@ -1,22 +1,39 @@
 ; SPDX-License-Identifier: BSD-3-Clause
 ; Copyright(c) 2020 Intel Corporation
 
-mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
+# Example command line:
+#	./build/examples/dpdk-pipeline -l0-1 -- -s ./examples/pipeline/examples/vxlan_pcap.cli
+#
+# Once the application has started, the command to get the CLI prompt is:
+#	telnet 0.0.0.0 8086
 
-pipeline PIPELINE0 create 0
+;
+; Pipeline code generation & shared object library build.
+;
+pipeline codegen ./examples/pipeline/examples/vxlan.spec /tmp/vxlan.c
+pipeline libbuild /tmp/vxlan.c /tmp/vxlan.so
 
-pipeline PIPELINE0 port in 0 source MEMPOOL0 ./examples/pipeline/examples/packet.pcap loop 1
-pipeline PIPELINE0 port in 1 source MEMPOOL0 ./examples/pipeline/examples/packet.pcap loop 1
-pipeline PIPELINE0 port in 2 source MEMPOOL0 ./examples/pipeline/examples/packet.pcap loop 1
-pipeline PIPELINE0 port in 3 source MEMPOOL0 ./examples/pipeline/examples/packet.pcap loop 1
+;
+; List of DPDK devices.
+;
+; Note: Customize the parameters below to match your setup.
+;
+mempool MEMPOOL0 buffer 2304 pool 32K cache 256 cpu 0
 
-pipeline PIPELINE0 port out 0 sink none
-pipeline PIPELINE0 port out 1 sink none
-pipeline PIPELINE0 port out 2 sink none
-pipeline PIPELINE0 port out 3 sink none
+;
+; List of pipelines.
+;
+pipeline PIPELINE0 build lib /tmp/vxlan.so io ./examples/pipeline/examples/pcap.io numa 0
 
-pipeline PIPELINE0 build ./examples/pipeline/examples/vxlan.spec
+;
+; Initial set of table entries.
+;
+; The table entries can later be updated at run-time through the CLI commands.
+;
 pipeline PIPELINE0 table vxlan_table add ./examples/pipeline/examples/vxlan_table.txt
 pipeline PIPELINE0 commit
 
+;
+; Pipelines-to-threads mapping.
+;
 thread 1 pipeline PIPELINE0 enable
