mbox

[0/3] ixgbe: Fix SFP hotplug detection/removal

Message ID 20220519174325.23308-1-jeffd@silicom-usa.com (mailing list archive)
Headers

Message

Jeff Daly May 19, 2022, 5:43 p.m. UTC 
  Currently the ixgbe driver does not ID any SFP except for the first one
plugged in. This can lead to no-link, or incorrect speed conditions.

For example:

* If link is initially established with a 1G SFP, and later a 1G/10G
multispeed part is later installed, then the MAC link setup functions are
never called to change from 1000BASE-X to 10GBASE-R mode, and the link
stays running at the slower rate.

* If link is initially established with a 1G SFP, and later a 10G only
module is later installed, no link is established, since we are still
trasnsmitting in 1000BASE-X mode to a 10GBASE-R only partner.

Refactor the SFP ID/setup, and link setup code, to more closely match the
flow of the mainline kernel driver which does not have these issues.  In
that driver a service task runs periodically to handle these operations
based on bit flags that have been set (usually via interrupt or userspace
request), and then get cleared once the requested subtask has been
completed.

Fixes: af75078fece ("first public release")
Cc: stable@dpdk.org