Outer VLAN processing is supported after firmware v8.4, kernel driver
also changes the default behavior to support this feature. To align with
kernel driver, add support for outer VLAN processing in DPDK.
But it is forbidden for firmware to change the Inner/Outer VLAN
configuration while there are MAC/VLAN filters in the switch table.
Therefore, we need to clear the MAC table before setting config,
and then restore the MAC table after setting.
This will not impact on an old firmware.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
---
drivers/net/i40e/i40e_ethdev.c | 79 +++++++++++++++++++++++++++++++---
drivers/net/i40e/i40e_ethdev.h | 3 ++
2 files changed, 77 insertions(+), 5 deletions(-)
@@ -3910,6 +3910,7 @@ i40e_vlan_tpid_set(struct rte_eth_dev *dev,
int qinq = dev->data->dev_conf.rxmode.offloads &
RTE_ETH_RX_OFFLOAD_VLAN_EXTEND;
int ret = 0;
+ u16 sw_flags = 0, valid_flags = 0;
if ((vlan_type != RTE_ETH_VLAN_TYPE_INNER &&
vlan_type != RTE_ETH_VLAN_TYPE_OUTER) ||
@@ -3927,15 +3928,28 @@ i40e_vlan_tpid_set(struct rte_eth_dev *dev,
/* 802.1ad frames ability is added in NVM API 1.7*/
if (hw->flags & I40E_HW_FLAG_802_1AD_CAPABLE) {
if (qinq) {
+ if (pf->is_outer_vlan_processing) {
+ sw_flags = I40E_AQ_SET_SWITCH_CFG_OUTER_VLAN;
+ valid_flags = I40E_AQ_SET_SWITCH_CFG_OUTER_VLAN;
+ }
if (vlan_type == RTE_ETH_VLAN_TYPE_OUTER)
hw->first_tag = rte_cpu_to_le_16(tpid);
else if (vlan_type == RTE_ETH_VLAN_TYPE_INNER)
hw->second_tag = rte_cpu_to_le_16(tpid);
} else {
- if (vlan_type == RTE_ETH_VLAN_TYPE_OUTER)
- hw->second_tag = rte_cpu_to_le_16(tpid);
+ if (pf->is_outer_vlan_processing) {
+ sw_flags = 0;
+ valid_flags = I40E_AQ_SET_SWITCH_CFG_OUTER_VLAN;
+ }
+ if (vlan_type == RTE_ETH_VLAN_TYPE_OUTER) {
+ if (pf->is_outer_vlan_processing)
+ hw->first_tag = rte_cpu_to_le_16(tpid);
+ else
+ hw->second_tag = rte_cpu_to_le_16(tpid);
+ }
}
- ret = i40e_aq_set_switch_config(hw, 0, 0, 0, NULL);
+ ret = i40e_aq_set_switch_config(hw, sw_flags,
+ valid_flags, 0, NULL);
if (ret != I40E_SUCCESS) {
PMD_DRV_LOG(ERR,
"Set switch config failed aq_err: %d",
@@ -3987,8 +4001,12 @@ static int
i40e_vlan_offload_set(struct rte_eth_dev *dev, int mask)
{
struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ struct i40e_mac_filter_info *mac_filter;
struct i40e_vsi *vsi = pf->main_vsi;
struct rte_eth_rxmode *rxmode;
+ struct i40e_mac_filter *f;
+ int i, num, ret;
+ void *temp;
rxmode = &dev->data->dev_conf.rxmode;
if (mask & RTE_ETH_VLAN_FILTER_MASK) {
@@ -4007,6 +4025,35 @@ i40e_vlan_offload_set(struct rte_eth_dev *dev, int mask)
}
if (mask & RTE_ETH_VLAN_EXTEND_MASK) {
+ i = 0;
+ num = vsi->mac_num;
+ mac_filter = rte_zmalloc("mac_filter_info_data",
+ num * sizeof(*mac_filter), 0);
+ if (mac_filter == NULL) {
+ PMD_DRV_LOG(ERR, "failed to allocate memory");
+ return I40E_ERR_NO_MEMORY;
+ }
+
+ /**
+ * Outer VLAN processing is supported after firmware v8.4, kernel driver
+ * also changes the default behavior to support this feature. To align with
+ * kernel driver, set switch config in 'i40e_vlan_tpie_set' to support for
+ * outer VLAN processing. But it is forbidden for firmware to change the
+ * Inner/Outer VLAN configuration while there are MAC/VLAN filters in the
+ * switch table. Therefore, we need to clear the MAC table before setting
+ * config, and then restore the MAC table after setting. This feature is
+ * recommended to be used in firmware v8.6 at least.
+ **/
+ /* Remove all existing mac */
+ RTE_TAILQ_FOREACH_SAFE(f, &vsi->mac_list, next, temp) {
+ mac_filter[i] = f->mac_info;
+ ret = i40e_vsi_delete_mac(vsi, &f->mac_info.mac_addr);
+ if (ret != I40E_SUCCESS) {
+ PMD_DRV_LOG(ERR, "Failed to delete mac filter");
+ return -EIO;
+ }
+ i++;
+ }
if (rxmode->offloads & RTE_ETH_RX_OFFLOAD_VLAN_EXTEND) {
i40e_vsi_config_double_vlan(vsi, TRUE);
/* Set global registers with default ethertype. */
@@ -4014,9 +4061,20 @@ i40e_vlan_offload_set(struct rte_eth_dev *dev, int mask)
RTE_ETHER_TYPE_VLAN);
i40e_vlan_tpid_set(dev, RTE_ETH_VLAN_TYPE_INNER,
RTE_ETHER_TYPE_VLAN);
- }
- else
+ } else {
+ if (pf->is_outer_vlan_processing)
+ i40e_vlan_tpid_set(dev, RTE_ETH_VLAN_TYPE_OUTER,
+ RTE_ETHER_TYPE_QINQ);
i40e_vsi_config_double_vlan(vsi, FALSE);
+ }
+ /* Restore all mac */
+ for (i = 0; i < num; i++) {
+ ret = i40e_vsi_add_mac(vsi, &mac_filter[i]);
+ if (ret != I40E_SUCCESS) {
+ PMD_DRV_LOG(ERR, "Failed to add mac filter");
+ return -EIO;
+ }
+ }
}
if (mask & RTE_ETH_QINQ_STRIP_MASK) {
@@ -4846,6 +4904,17 @@ i40e_pf_parameter_init(struct rte_eth_dev *dev)
return -EINVAL;
}
+ /**
+ * Enable outer VLAN processing if firmware version is greater
+ * than v8.3
+ */
+ if (hw->aq.fw_maj_ver > 8 ||
+ (hw->aq.fw_maj_ver == 8 && hw->aq.fw_min_ver > 3)) {
+ pf->is_outer_vlan_processing = true;
+ } else {
+ pf->is_outer_vlan_processing = false;
+ }
+
return 0;
}
@@ -1188,6 +1188,9 @@ struct i40e_pf {
/* Switch Domain Id */
uint16_t switch_domain_id;
+ /* The enable flag for outer VLAN processing */
+ bool is_outer_vlan_processing;
+
struct i40e_vf_msg_cfg vf_msg_cfg;
uint64_t prev_rx_bytes;
uint64_t prev_tx_bytes;