@@ -631,6 +631,9 @@ static void cmd_help_long_parsed(void *parsed_result,
"show bonding config (port_id)\n"
" Show the bonding config for port_id.\n\n"
+ "show bonding lacp info (port_id)\n"
+ " Show the bonding lacp information for port_id.\n\n"
+
"set bonding mac_addr (port_id) (address)\n"
" Set the MAC address of a bonded device.\n\n"
@@ -6107,6 +6110,186 @@ cmdline_parse_inst_t cmd_set_balance_xmit_policy = {
}
};
+/* *** SHOW IEEE802.3 BONDING INFORMATION *** */
+struct cmd_show_bonding_lacp_info_result {
+ cmdline_fixed_string_t show;
+ cmdline_fixed_string_t bonding;
+ cmdline_fixed_string_t lacp;
+ cmdline_fixed_string_t info;
+ portid_t port_id;
+};
+
+static void port_param_show(struct port_params *params)
+{
+ char buf[RTE_ETHER_ADDR_FMT_SIZE];
+
+ printf("\t\tsystem priority: %u\n", params->system_priority);
+ rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, ¶ms->system);
+ printf("\t\tsystem mac address: %s\n", buf);
+ printf("\t\tport key: %u\n", params->key);
+ printf("\t\tport priority: %u\n", params->port_priority);
+ printf("\t\tport number: %u\n", params->port_number);
+}
+
+static void lacp_slave_info_show(struct rte_eth_bond_8023ad_slave_info *info)
+{
+ char a_state[256] = { 0 };
+ char p_state[256] = { 0 };
+ int a_len = 0;
+ int p_len = 0;
+ uint32_t i;
+
+ static const char * const state[] = {
+ "ACTIVE",
+ "TIMEOUT",
+ "AGGREGATION",
+ "SYNCHRONIZATION",
+ "COLLECTING",
+ "DISTRIBUTING",
+ "DEFAULTED",
+ "EXPIRED"
+ };
+ static const char * const selection[] = {
+ "UNSELECTED",
+ "STANDBY",
+ "SELECTED"
+ };
+
+ for (i = 0; i < RTE_DIM(state); i++) {
+ if ((info->actor_state >> i) & 1)
+ a_len += snprintf(&a_state[a_len],
+ RTE_DIM(a_state) - a_len, "%s ",
+ state[i]);
+
+ if ((info->partner_state >> i) & 1)
+ p_len += snprintf(&p_state[p_len],
+ RTE_DIM(p_state) - p_len, "%s ",
+ state[i]);
+ }
+ printf("\tAggregator port id: %u\n", info->agg_port_id);
+ printf("\tselection: %s\n", selection[info->selected]);
+ printf("\tActor detail info:\n");
+ port_param_show(&info->actor);
+ printf("\t\tport state: %s\n", a_state);
+ printf("\tPartner detail info:\n");
+ port_param_show(&info->partner);
+ printf("\t\tport state: %s\n", p_state);
+ printf("\n");
+}
+
+static void lacp_conf_show(struct rte_eth_bond_8023ad_conf *conf)
+{
+ printf("\tfast period: %u ms\n", conf->fast_periodic_ms);
+ printf("\tslow period: %u ms\n", conf->slow_periodic_ms);
+ printf("\tshort timeout: %u ms\n", conf->short_timeout_ms);
+ printf("\tlong timeout: %u ms\n", conf->long_timeout_ms);
+ printf("\taggregate wait timeout: %u ms\n",
+ conf->aggregate_wait_timeout_ms);
+ printf("\ttx period: %u ms\n", conf->tx_period_ms);
+ printf("\trx marker period: %u ms\n", conf->rx_marker_period_ms);
+ printf("\tupdate timeout: %u ms\n", conf->update_timeout_ms);
+ switch (conf->agg_selection) {
+ case AGG_BANDWIDTH:
+ printf("\taggregation mode: bandwidth\n");
+ break;
+ case AGG_STABLE:
+ printf("\taggregation mode: stable\n");
+ break;
+ case AGG_COUNT:
+ printf("\taggregation mode: count\n");
+ break;
+ default:
+ printf("\taggregation mode: invalid\n");
+ break;
+ }
+
+ printf("\n");
+}
+
+static void cmd_show_bonding_lacp_info_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_show_bonding_lacp_info_result *res = parsed_result;
+ struct rte_eth_bond_8023ad_slave_info slave_info;
+ struct rte_eth_bond_8023ad_conf port_conf;
+ portid_t slaves[RTE_MAX_ETHPORTS];
+ portid_t port_id = res->port_id;
+ int num_active_slaves;
+ int bonding_mode;
+ int i;
+ int ret;
+
+ bonding_mode = rte_eth_bond_mode_get(port_id);
+ if (bonding_mode != BONDING_MODE_8023AD) {
+ fprintf(stderr, "\tBonding mode is not mode 4\n");
+ return;
+ }
+
+ num_active_slaves = rte_eth_bond_active_slaves_get(port_id, slaves,
+ RTE_MAX_ETHPORTS);
+ if (num_active_slaves < 0) {
+ fprintf(stderr, "\tFailed to get active slave list for port = %u\n",
+ port_id);
+ return;
+ }
+ if (num_active_slaves == 0)
+ fprintf(stderr, "\tIEEE802.3 port %u has no active slave\n",
+ port_id);
+
+ printf("\tIEEE802.3 port: %u\n", port_id);
+ ret = rte_eth_bond_8023ad_conf_get(port_id, &port_conf);
+ if (ret) {
+ fprintf(stderr, "\tGet bonded device %u info failed\n",
+ port_id);
+ return;
+ }
+ lacp_conf_show(&port_conf);
+
+ for (i = 0; i < num_active_slaves; i++) {
+ ret = rte_eth_bond_8023ad_slave_info(port_id, slaves[i],
+ &slave_info);
+ if (ret) {
+ fprintf(stderr, "\tGet slave device %u info failed\n",
+ slaves[i]);
+ return;
+ }
+ printf("\tSlave Port: %u\n", slaves[i]);
+ lacp_slave_info_show(&slave_info);
+ }
+}
+
+cmdline_parse_token_string_t cmd_show_bonding_lacp_info_show =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ show, "show");
+cmdline_parse_token_string_t cmd_show_bonding_lacp_info_bonding =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ bonding, "bonding");
+cmdline_parse_token_string_t cmd_show_bonding_lacp_info_lacp =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ bonding, "lacp");
+cmdline_parse_token_string_t cmd_show_bonding_lacp_info_info =
+TOKEN_STRING_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ info, "info");
+cmdline_parse_token_num_t cmd_show_bonding_lacp_info_port_id =
+TOKEN_NUM_INITIALIZER(struct cmd_show_bonding_lacp_info_result,
+ port_id, RTE_UINT16);
+
+cmdline_parse_inst_t cmd_show_bonding_lacp_info = {
+ .f = cmd_show_bonding_lacp_info_parsed,
+ .help_str = "show bonding lacp info <port_id> : "
+ "Show bonding IEEE802.3 information for port_id",
+ .data = NULL,
+ .tokens = {
+ (void *)&cmd_show_bonding_lacp_info_show,
+ (void *)&cmd_show_bonding_lacp_info_bonding,
+ (void *)&cmd_show_bonding_lacp_info_lacp,
+ (void *)&cmd_show_bonding_lacp_info_info,
+ (void *)&cmd_show_bonding_lacp_info_port_id,
+ NULL
+ }
+};
+
/* *** SHOW NIC BONDING CONFIGURATION *** */
struct cmd_show_bonding_config_result {
cmdline_fixed_string_t show;
@@ -17589,6 +17772,7 @@ cmdline_parse_ctx_t main_ctx[] = {
#ifdef RTE_NET_BOND
(cmdline_parse_inst_t *) &cmd_set_bonding_mode,
(cmdline_parse_inst_t *) &cmd_show_bonding_config,
+ (cmdline_parse_inst_t *) &cmd_show_bonding_lacp_info,
(cmdline_parse_inst_t *) &cmd_set_bonding_primary,
(cmdline_parse_inst_t *) &cmd_add_bonding_slave,
(cmdline_parse_inst_t *) &cmd_remove_bonding_slave,
@@ -2630,6 +2630,12 @@ in balance mode with a transmission policy of layer 2+3::
Active Slaves (3): [1 3 4]
Primary: [3]
+show bonding lacp info
+~~~~~~~~~~~~~~~~~~~~~~
+
+Show information about the Link Bonding device in mode 4 (link-aggregation-802.3ad)::
+
+ testpmd> show bonding lacp info (port_id)
Register Functions
------------------