diff mbox series

[v2,3/3] net/af_xdp: preferred busy polling

Message ID 20210309101958.27355-4-ciara.loftus@intel.com (mailing list archive)
State Superseded, archived
Delegated to: Ferruh Yigit
Headers show
Series AF_XDP Preferred Busy Polling | expand

Checks

Context Check Description
ci/intel-Testing success Testing PASS
ci/Intel-compilation success Compilation OK
ci/iol-mellanox-Performance success Performance Testing PASS
ci/iol-testing success Testing PASS
ci/iol-intel-Performance success Performance Testing PASS
ci/github-robot success github build: passed
ci/travis-robot success travis build: passed
ci/checkpatch success coding style OK

Commit Message

Ciara Loftus March 9, 2021, 10:19 a.m. UTC
This commit introduces support for preferred busy polling
to the AF_XDP PMD. This feature aims to improve single-core
performance for AF_XDP sockets under heavy load.

A new vdev arg is introduced called 'busy_budget' whose default
value is 64. busy_budget is the value supplied to the kernel
with the SO_BUSY_POLL_BUDGET socket option and represents the
busy-polling NAPI budget. To set the budget to a different value
eg. 256:

--vdev=net_af_xdp0,iface=eth0,busy_budget=256

Preferred busy polling is enabled by default provided a kernel with
version >= v5.11 is in use. To disable it, set the budget to zero.

The following settings are also strongly recommended to be used in
conjunction with this feature:

echo 2 | sudo tee /sys/class/net/eth0/napi_defer_hard_irqs
echo 200000 | sudo tee /sys/class/net/eth0/gro_flush_timeout

.. where eth0 is the interface being used by the PMD.

Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
---
 doc/guides/nics/af_xdp.rst             |  38 +++++++-
 doc/guides/rel_notes/release_21_05.rst |   4 +
 drivers/net/af_xdp/compat.h            |  14 +++
 drivers/net/af_xdp/rte_eth_af_xdp.c    | 117 ++++++++++++++++++++++---
 4 files changed, 161 insertions(+), 12 deletions(-)

Comments

Ferruh Yigit March 9, 2021, 4:33 p.m. UTC | #1
On 3/9/2021 10:19 AM, Ciara Loftus wrote:
> This commit introduces support for preferred busy polling
> to the AF_XDP PMD. This feature aims to improve single-core
> performance for AF_XDP sockets under heavy load.
> 
> A new vdev arg is introduced called 'busy_budget' whose default
> value is 64. busy_budget is the value supplied to the kernel
> with the SO_BUSY_POLL_BUDGET socket option and represents the
> busy-polling NAPI budget. To set the budget to a different value
> eg. 256:
> 
> --vdev=net_af_xdp0,iface=eth0,busy_budget=256
> 
> Preferred busy polling is enabled by default provided a kernel with
> version >= v5.11 is in use. To disable it, set the budget to zero.
> 
> The following settings are also strongly recommended to be used in
> conjunction with this feature:
> 
> echo 2 | sudo tee /sys/class/net/eth0/napi_defer_hard_irqs
> echo 200000 | sudo tee /sys/class/net/eth0/gro_flush_timeout
> 
> .. where eth0 is the interface being used by the PMD.
> 
> Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>

<...>

> --- a/doc/guides/rel_notes/release_21_05.rst
> +++ b/doc/guides/rel_notes/release_21_05.rst
> @@ -70,6 +70,10 @@ New Features
>     * Added command to display Rx queue used descriptor count.
>       ``show port (port_id) rxq (queue_id) desc used count``
>   
> +* **Updated the AF_XDP driver.**
> +
> +  * Added support for preferred busy polling.
> +
>   

Can you please move the update after above the testpmd updates?
For more details the expected order is in the section comment.

> +static int
> +configure_preferred_busy_poll(struct pkt_rx_queue *rxq)
> +{
> +	int sock_opt = 1;
> +	int fd = xsk_socket__fd(rxq->xsk);
> +	int ret = 0;
> +
> +	ret = setsockopt(fd, SOL_SOCKET, SO_PREFER_BUSY_POLL,
> +			(void *)&sock_opt, sizeof(sock_opt));
> +	if (ret < 0) {
> +		AF_XDP_LOG(DEBUG, "Failed to set SO_PREFER_BUSY_POLL\n");
> +		goto err_prefer;
> +	}
> +
> +	sock_opt = ETH_AF_XDP_DFLT_BUSY_TIMEOUT;
> +	ret = setsockopt(fd, SOL_SOCKET, SO_BUSY_POLL, (void *)&sock_opt,
> +			sizeof(sock_opt));
> +	if (ret < 0) {
> +		AF_XDP_LOG(DEBUG, "Failed to set SO_BUSY_POLL\n");

[1]

> +		goto err_timeout;
> +	}
> +
> +	sock_opt = rxq->busy_budget;
> +	ret = setsockopt(fd, SOL_SOCKET, SO_BUSY_POLL_BUDGET,
> +			(void *)&sock_opt, sizeof(sock_opt));
> +	if (ret < 0) {
> +		AF_XDP_LOG(DEBUG, "Failed to set SO_BUSY_POLL_BUDGET\n");

In above [1] and here, shouldn't the function return error, even the rollback is 
successful.
I am thinking a case an invalid 'busy_budget' provided, like a very big number 
or negative value.

> +	} else {
> +		AF_XDP_LOG(INFO, "Busy polling budget set to: %u\n",
> +					rxq->busy_budget);
> +		return 0;
> +	}
> +
> +	/* setsockopt failure - attempt to restore xsk to default state and
> +	 * proceed without busy polling support.
> +	 */
> +	sock_opt = 0;
> +	ret = setsockopt(fd, SOL_SOCKET, SO_BUSY_POLL, (void *)&sock_opt,
> +			sizeof(sock_opt));
> +	if (ret < 0) {
> +		AF_XDP_LOG(ERR, "Failed to unset SO_BUSY_POLL\n");
> +		return -1;
> +	}
> +
> +err_timeout:
> +	sock_opt = 0;
> +	ret = setsockopt(fd, SOL_SOCKET, SO_PREFER_BUSY_POLL,
> +			(void *)&sock_opt, sizeof(sock_opt));
> +	if (ret < 0) {
> +		AF_XDP_LOG(ERR, "Failed to unset SO_PREFER_BUSY_POLL\n");
> +		return -1;
> +	}
> +
> +err_prefer:
> +	rxq->busy_budget = 0;
> +	return 0;
> +}
> +

<...>
Ciara Loftus March 10, 2021, 7:55 a.m. UTC | #2
> On 3/9/2021 10:19 AM, Ciara Loftus wrote:
> > This commit introduces support for preferred busy polling
> > to the AF_XDP PMD. This feature aims to improve single-core
> > performance for AF_XDP sockets under heavy load.
> >
> > A new vdev arg is introduced called 'busy_budget' whose default
> > value is 64. busy_budget is the value supplied to the kernel
> > with the SO_BUSY_POLL_BUDGET socket option and represents the
> > busy-polling NAPI budget. To set the budget to a different value
> > eg. 256:
> >
> > --vdev=net_af_xdp0,iface=eth0,busy_budget=256
> >
> > Preferred busy polling is enabled by default provided a kernel with
> > version >= v5.11 is in use. To disable it, set the budget to zero.
> >
> > The following settings are also strongly recommended to be used in
> > conjunction with this feature:
> >
> > echo 2 | sudo tee /sys/class/net/eth0/napi_defer_hard_irqs
> > echo 200000 | sudo tee /sys/class/net/eth0/gro_flush_timeout
> >
> > .. where eth0 is the interface being used by the PMD.
> >
> > Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
> 
> <...>
> 
> > --- a/doc/guides/rel_notes/release_21_05.rst
> > +++ b/doc/guides/rel_notes/release_21_05.rst
> > @@ -70,6 +70,10 @@ New Features
> >     * Added command to display Rx queue used descriptor count.
> >       ``show port (port_id) rxq (queue_id) desc used count``
> >
> > +* **Updated the AF_XDP driver.**
> > +
> > +  * Added support for preferred busy polling.
> > +
> >
> 
> Can you please move the update after above the testpmd updates?
> For more details the expected order is in the section comment.
> 
> > +static int
> > +configure_preferred_busy_poll(struct pkt_rx_queue *rxq)
> > +{
> > +	int sock_opt = 1;
> > +	int fd = xsk_socket__fd(rxq->xsk);
> > +	int ret = 0;
> > +
> > +	ret = setsockopt(fd, SOL_SOCKET, SO_PREFER_BUSY_POLL,
> > +			(void *)&sock_opt, sizeof(sock_opt));
> > +	if (ret < 0) {
> > +		AF_XDP_LOG(DEBUG, "Failed to set
> SO_PREFER_BUSY_POLL\n");
> > +		goto err_prefer;
> > +	}
> > +
> > +	sock_opt = ETH_AF_XDP_DFLT_BUSY_TIMEOUT;
> > +	ret = setsockopt(fd, SOL_SOCKET, SO_BUSY_POLL, (void
> *)&sock_opt,
> > +			sizeof(sock_opt));
> > +	if (ret < 0) {
> > +		AF_XDP_LOG(DEBUG, "Failed to set SO_BUSY_POLL\n");
> 
> [1]
> 
> > +		goto err_timeout;
> > +	}
> > +
> > +	sock_opt = rxq->busy_budget;
> > +	ret = setsockopt(fd, SOL_SOCKET, SO_BUSY_POLL_BUDGET,
> > +			(void *)&sock_opt, sizeof(sock_opt));
> > +	if (ret < 0) {
> > +		AF_XDP_LOG(DEBUG, "Failed to set
> SO_BUSY_POLL_BUDGET\n");
> 
> In above [1] and here, shouldn't the function return error, even the rollback
> is
> successful.
> I am thinking a case an invalid 'busy_budget' provided, like a very big number
> or negative value.

How about introducing a check when parsing the argument at init and failing then, instead of here?
In that case if we fail here it should not be due to invalid value. It would be due to insufficient permissions.
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/net/core/sock.c?h=v5.11#n1150
In that case I think issuing a log, rolling back and continuing with setup would be best, instead of returning an error and aborting and forcing the user to explicitly disable busy polling via busy_budget=0 in order to get the PMD to initialize.

> 
> > +	} else {
> > +		AF_XDP_LOG(INFO, "Busy polling budget set to: %u\n",
> > +					rxq->busy_budget);
> > +		return 0;
> > +	}
> > +
> > +	/* setsockopt failure - attempt to restore xsk to default state and
> > +	 * proceed without busy polling support.
> > +	 */
> > +	sock_opt = 0;
> > +	ret = setsockopt(fd, SOL_SOCKET, SO_BUSY_POLL, (void
> *)&sock_opt,
> > +			sizeof(sock_opt));
> > +	if (ret < 0) {
> > +		AF_XDP_LOG(ERR, "Failed to unset SO_BUSY_POLL\n");
> > +		return -1;
> > +	}
> > +
> > +err_timeout:
> > +	sock_opt = 0;
> > +	ret = setsockopt(fd, SOL_SOCKET, SO_PREFER_BUSY_POLL,
> > +			(void *)&sock_opt, sizeof(sock_opt));
> > +	if (ret < 0) {
> > +		AF_XDP_LOG(ERR, "Failed to unset
> SO_PREFER_BUSY_POLL\n");
> > +		return -1;
> > +	}
> > +
> > +err_prefer:
> > +	rxq->busy_budget = 0;
> > +	return 0;
> > +}
> > +
> 
> <...>
diff mbox series

Patch

diff --git a/doc/guides/nics/af_xdp.rst b/doc/guides/nics/af_xdp.rst
index 5ed24374f8..8bf40b5f0f 100644
--- a/doc/guides/nics/af_xdp.rst
+++ b/doc/guides/nics/af_xdp.rst
@@ -35,6 +35,7 @@  The following options can be provided to set up an af_xdp port in DPDK.
 *   ``shared_umem`` - PMD will attempt to share UMEM with others (optional,
     default 0);
 *   ``xdp_prog`` - path to custom xdp program (optional, default none);
+*   ``busy_budget`` - busy polling budget (optional, default 64);
 
 Prerequisites
 -------------
@@ -51,6 +52,7 @@  This is a Linux-specific PMD, thus the following prerequisites apply:
 *  For shared_umem, it requires kernel version v5.10 or later and libbpf version
    v0.2.0 or later.
 *  For 32-bit OS, a kernel with version 5.4 or later is required.
+*  For busy polling, kernel version v5.11 or later is required.
 
 Set up an af_xdp interface
 -----------------------------
@@ -107,4 +109,38 @@  Limitations
   .. code-block:: console
 
     --vdev net_af_xdp0,iface=ens786f1,shared_umem=1 \
-    --vdev net_af_xdp1,iface=ens786f2,shared_umem=1 \
\ No newline at end of file
+    --vdev net_af_xdp1,iface=ens786f2,shared_umem=1 \
+
+- **Preferred Busy Polling**
+
+  The SO_PREFER_BUSY_POLL socket option was introduced in kernel v5.11. It can
+  deliver a performance improvement for sockets with heavy traffic loads and
+  can significantly improve single-core performance in this context.
+
+  The feature is enabled by default in the AF_XDP PMD. To disable it, set the
+  'busy_budget' vdevarg to zero:
+
+  .. code-block:: console
+
+    --vdev net_af_xdp0,iface=ens786f1,busy_budget=0
+
+  The default 'busy_budget' is 64 and it represents the number of packets the
+  kernel will attempt to process in the netdev's NAPI context. You can change
+  the value for example to 256 like so:
+
+  .. code-block:: console
+
+    --vdev net_af_xdp0,iface=ens786f1,busy_budget=256
+
+  It is also strongly recommended to set the following for optimal performance:
+
+  .. code-block:: console
+
+    echo 2 | sudo tee /sys/class/net/ens786f1/napi_defer_hard_irqs
+    echo 200000 | sudo tee /sys/class/net/ens786f1/gro_flush_timeout
+
+  The above defers interrupts for interface ens786f1 and instead schedules its
+  NAPI context from a watchdog timer instead of from softirqs. More information
+  on this feature can be found at [1].
+
+  [1] https://lwn.net/Articles/837010/
\ No newline at end of file
diff --git a/doc/guides/rel_notes/release_21_05.rst b/doc/guides/rel_notes/release_21_05.rst
index 23f7f0bff9..2d4794aa21 100644
--- a/doc/guides/rel_notes/release_21_05.rst
+++ b/doc/guides/rel_notes/release_21_05.rst
@@ -70,6 +70,10 @@  New Features
   * Added command to display Rx queue used descriptor count.
     ``show port (port_id) rxq (queue_id) desc used count``
 
+* **Updated the AF_XDP driver.**
+
+  * Added support for preferred busy polling.
+
 
 Removed Items
 -------------
diff --git a/drivers/net/af_xdp/compat.h b/drivers/net/af_xdp/compat.h
index 7aa40d522e..545c8aa395 100644
--- a/drivers/net/af_xdp/compat.h
+++ b/drivers/net/af_xdp/compat.h
@@ -39,3 +39,17 @@  create_shared_socket(struct xsk_socket **xsk_ptr __rte_unused,
 	return -1;
 }
 #endif
+
+#ifdef XDP_USE_NEED_WAKEUP
+static int
+syscall_needed(struct xsk_ring_prod *q, uint32_t busy_budget)
+{
+	return xsk_ring_prod__needs_wakeup(q) | busy_budget;
+}
+#else
+static int
+syscall_needed(struct xsk_ring_prod *q __rte_unused, uint32_t busy_budget)
+{
+	return busy_budget;
+}
+#endif
diff --git a/drivers/net/af_xdp/rte_eth_af_xdp.c b/drivers/net/af_xdp/rte_eth_af_xdp.c
index 9c0e935cd3..4953525484 100644
--- a/drivers/net/af_xdp/rte_eth_af_xdp.c
+++ b/drivers/net/af_xdp/rte_eth_af_xdp.c
@@ -41,6 +41,13 @@ 
 
 #include "compat.h"
 
+#ifndef SO_PREFER_BUSY_POLL
+#define SO_PREFER_BUSY_POLL 69
+#endif
+#ifndef SO_BUSY_POLL_BUDGET
+#define SO_BUSY_POLL_BUDGET 70
+#endif
+
 
 #ifndef SOL_XDP
 #define SOL_XDP 283
@@ -65,6 +72,8 @@  RTE_LOG_REGISTER(af_xdp_logtype, pmd.net.af_xdp, NOTICE);
 #define ETH_AF_XDP_DFLT_NUM_DESCS	XSK_RING_CONS__DEFAULT_NUM_DESCS
 #define ETH_AF_XDP_DFLT_START_QUEUE_IDX	0
 #define ETH_AF_XDP_DFLT_QUEUE_COUNT	1
+#define ETH_AF_XDP_DFLT_BUSY_BUDGET	64
+#define ETH_AF_XDP_DFLT_BUSY_TIMEOUT	20
 
 #define ETH_AF_XDP_RX_BATCH_SIZE	XSK_RING_CONS__DEFAULT_NUM_DESCS
 #define ETH_AF_XDP_TX_BATCH_SIZE	XSK_RING_CONS__DEFAULT_NUM_DESCS
@@ -100,6 +109,7 @@  struct pkt_rx_queue {
 	struct pkt_tx_queue *pair;
 	struct pollfd fds[1];
 	int xsk_queue_idx;
+	uint32_t busy_budget;
 };
 
 struct tx_stats {
@@ -140,6 +150,7 @@  struct pmd_internals {
 #define ETH_AF_XDP_QUEUE_COUNT_ARG		"queue_count"
 #define ETH_AF_XDP_SHARED_UMEM_ARG		"shared_umem"
 #define ETH_AF_XDP_PROG_ARG			"xdp_prog"
+#define ETH_AF_XDP_BUDGET_ARG			"busy_budget"
 
 static const char * const valid_arguments[] = {
 	ETH_AF_XDP_IFACE_ARG,
@@ -147,6 +158,7 @@  static const char * const valid_arguments[] = {
 	ETH_AF_XDP_QUEUE_COUNT_ARG,
 	ETH_AF_XDP_SHARED_UMEM_ARG,
 	ETH_AF_XDP_PROG_ARG,
+	ETH_AF_XDP_BUDGET_ARG,
 	NULL
 };
 
@@ -261,11 +273,9 @@  af_xdp_rx_zc(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
 	nb_pkts = xsk_ring_cons__peek(rx, nb_pkts, &idx_rx);
 
 	if (nb_pkts == 0) {
-#if defined(XDP_USE_NEED_WAKEUP)
-		if (xsk_ring_prod__needs_wakeup(fq))
+		if (syscall_needed(&rxq->fq, rxq->busy_budget))
 			recvfrom(xsk_socket__fd(rxq->xsk), NULL, 0,
 				MSG_DONTWAIT, NULL, NULL);
-#endif
 
 		return 0;
 	}
@@ -446,9 +456,7 @@  kick_tx(struct pkt_tx_queue *txq, struct xsk_ring_cons *cq)
 
 	pull_umem_cq(umem, XSK_RING_CONS__DEFAULT_NUM_DESCS, cq);
 
-#if defined(XDP_USE_NEED_WAKEUP)
-	if (xsk_ring_prod__needs_wakeup(&txq->tx))
-#endif
+	if (syscall_needed(&txq->tx, txq->pair->busy_budget))
 		while (send(xsk_socket__fd(txq->pair->xsk), NULL,
 			    0, MSG_DONTWAIT) < 0) {
 			/* some thing unexpected */
@@ -795,6 +803,8 @@  eth_dev_info(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
 	dev_info->max_mtu = ETH_AF_XDP_FRAME_SIZE - XDP_PACKET_HEADROOM;
 #endif
 
+	dev_info->default_rxportconf.burst_size = ETH_AF_XDP_DFLT_BUSY_BUDGET;
+	dev_info->default_txportconf.burst_size = ETH_AF_XDP_DFLT_BUSY_BUDGET;
 	dev_info->default_rxportconf.nb_queues = 1;
 	dev_info->default_txportconf.nb_queues = 1;
 	dev_info->default_rxportconf.ring_size = ETH_AF_XDP_DFLT_NUM_DESCS;
@@ -1142,6 +1152,65 @@  load_custom_xdp_prog(const char *prog_path, int if_index)
 	return 0;
 }
 
+/* Detect support for busy polling through setsockopt(). */
+static int
+configure_preferred_busy_poll(struct pkt_rx_queue *rxq)
+{
+	int sock_opt = 1;
+	int fd = xsk_socket__fd(rxq->xsk);
+	int ret = 0;
+
+	ret = setsockopt(fd, SOL_SOCKET, SO_PREFER_BUSY_POLL,
+			(void *)&sock_opt, sizeof(sock_opt));
+	if (ret < 0) {
+		AF_XDP_LOG(DEBUG, "Failed to set SO_PREFER_BUSY_POLL\n");
+		goto err_prefer;
+	}
+
+	sock_opt = ETH_AF_XDP_DFLT_BUSY_TIMEOUT;
+	ret = setsockopt(fd, SOL_SOCKET, SO_BUSY_POLL, (void *)&sock_opt,
+			sizeof(sock_opt));
+	if (ret < 0) {
+		AF_XDP_LOG(DEBUG, "Failed to set SO_BUSY_POLL\n");
+		goto err_timeout;
+	}
+
+	sock_opt = rxq->busy_budget;
+	ret = setsockopt(fd, SOL_SOCKET, SO_BUSY_POLL_BUDGET,
+			(void *)&sock_opt, sizeof(sock_opt));
+	if (ret < 0) {
+		AF_XDP_LOG(DEBUG, "Failed to set SO_BUSY_POLL_BUDGET\n");
+	} else {
+		AF_XDP_LOG(INFO, "Busy polling budget set to: %u\n",
+					rxq->busy_budget);
+		return 0;
+	}
+
+	/* setsockopt failure - attempt to restore xsk to default state and
+	 * proceed without busy polling support.
+	 */
+	sock_opt = 0;
+	ret = setsockopt(fd, SOL_SOCKET, SO_BUSY_POLL, (void *)&sock_opt,
+			sizeof(sock_opt));
+	if (ret < 0) {
+		AF_XDP_LOG(ERR, "Failed to unset SO_BUSY_POLL\n");
+		return -1;
+	}
+
+err_timeout:
+	sock_opt = 0;
+	ret = setsockopt(fd, SOL_SOCKET, SO_PREFER_BUSY_POLL,
+			(void *)&sock_opt, sizeof(sock_opt));
+	if (ret < 0) {
+		AF_XDP_LOG(ERR, "Failed to unset SO_PREFER_BUSY_POLL\n");
+		return -1;
+	}
+
+err_prefer:
+	rxq->busy_budget = 0;
+	return 0;
+}
+
 static int
 xsk_configure(struct pmd_internals *internals, struct pkt_rx_queue *rxq,
 	      int ring_size)
@@ -1200,6 +1269,15 @@  xsk_configure(struct pmd_internals *internals, struct pkt_rx_queue *rxq,
 		goto err;
 	}
 #endif
+
+	if (rxq->busy_budget) {
+		ret = configure_preferred_busy_poll(rxq);
+		if (ret) {
+			AF_XDP_LOG(ERR, "Failed configure busy polling.\n");
+			goto err;
+		}
+	}
+
 	ret = reserve_fill_queue(rxq->umem, reserve_size, fq_bufs, &rxq->fq);
 	if (ret) {
 		xsk_socket__delete(rxq->xsk);
@@ -1257,6 +1335,9 @@  eth_rx_queue_setup(struct rte_eth_dev *dev,
 		goto err;
 	}
 
+	if (!rxq->busy_budget)
+		AF_XDP_LOG(DEBUG, "Preferred busy polling not enabled\n");
+
 	rxq->fds[0].fd = xsk_socket__fd(rxq->xsk);
 	rxq->fds[0].events = POLLIN;
 
@@ -1465,7 +1546,8 @@  xdp_get_channels_info(const char *if_name, int *max_queues,
 
 static int
 parse_parameters(struct rte_kvargs *kvlist, char *if_name, int *start_queue,
-			int *queue_cnt, int *shared_umem, char *prog_path)
+			int *queue_cnt, int *shared_umem, char *prog_path,
+			int *busy_budget)
 {
 	int ret;
 
@@ -1496,6 +1578,11 @@  parse_parameters(struct rte_kvargs *kvlist, char *if_name, int *start_queue,
 	if (ret < 0)
 		goto free_kvlist;
 
+	ret = rte_kvargs_process(kvlist, ETH_AF_XDP_BUDGET_ARG,
+				&parse_integer_arg, busy_budget);
+	if (ret < 0)
+		goto free_kvlist;
+
 free_kvlist:
 	rte_kvargs_free(kvlist);
 	return ret;
@@ -1534,7 +1621,7 @@  get_iface_info(const char *if_name,
 static struct rte_eth_dev *
 init_internals(struct rte_vdev_device *dev, const char *if_name,
 		int start_queue_idx, int queue_cnt, int shared_umem,
-		const char *prog_path)
+		const char *prog_path, int busy_budget)
 {
 	const char *name = rte_vdev_device_name(dev);
 	const unsigned int numa_node = dev->device.numa_node;
@@ -1595,6 +1682,7 @@  init_internals(struct rte_vdev_device *dev, const char *if_name,
 		internals->rx_queues[i].pair = &internals->tx_queues[i];
 		internals->rx_queues[i].xsk_queue_idx = start_queue_idx + i;
 		internals->tx_queues[i].xsk_queue_idx = start_queue_idx + i;
+		internals->rx_queues[i].busy_budget = busy_budget;
 	}
 
 	ret = get_iface_info(if_name, &internals->eth_addr,
@@ -1638,6 +1726,7 @@  rte_pmd_af_xdp_probe(struct rte_vdev_device *dev)
 	int xsk_queue_cnt = ETH_AF_XDP_DFLT_QUEUE_COUNT;
 	int shared_umem = 0;
 	char prog_path[PATH_MAX] = {'\0'};
+	int busy_budget = -1;
 	struct rte_eth_dev *eth_dev = NULL;
 	const char *name;
 
@@ -1667,7 +1756,8 @@  rte_pmd_af_xdp_probe(struct rte_vdev_device *dev)
 		dev->device.numa_node = rte_socket_id();
 
 	if (parse_parameters(kvlist, if_name, &xsk_start_queue_idx,
-			     &xsk_queue_cnt, &shared_umem, prog_path) < 0) {
+			     &xsk_queue_cnt, &shared_umem, prog_path,
+			     &busy_budget) < 0) {
 		AF_XDP_LOG(ERR, "Invalid kvargs value\n");
 		return -EINVAL;
 	}
@@ -1677,8 +1767,12 @@  rte_pmd_af_xdp_probe(struct rte_vdev_device *dev)
 		return -EINVAL;
 	}
 
+	busy_budget = busy_budget == -1 ? ETH_AF_XDP_DFLT_BUSY_BUDGET :
+					busy_budget;
+
 	eth_dev = init_internals(dev, if_name, xsk_start_queue_idx,
-					xsk_queue_cnt, shared_umem, prog_path);
+					xsk_queue_cnt, shared_umem, prog_path,
+					busy_budget);
 	if (eth_dev == NULL) {
 		AF_XDP_LOG(ERR, "Failed to init internals\n");
 		return -1;
@@ -1723,4 +1817,5 @@  RTE_PMD_REGISTER_PARAM_STRING(net_af_xdp,
 			      "start_queue=<int> "
 			      "queue_count=<int> "
 			      "shared_umem=<int> "
-			      "xdp_prog=<string> ");
+			      "xdp_prog=<string> "
+			      "busy_budget=<int>");