diff mbox series

[v3,16/22] net/ixgbe: fix the jumbo frame flag condition

Message ID 20210114094714.14372-1-stevex.yang@intel.com (mailing list archive)
State Superseded, archived
Delegated to: Ferruh Yigit
Headers show
Series None | expand

Checks

Context Check Description
ci/iol-testing success Testing PASS
ci/iol-abi-testing success Testing PASS
ci/iol-mellanox-Performance success Performance Testing PASS
ci/iol-mellanox-Functional success Functional Testing PASS
ci/iol-intel-Functional success Functional Testing PASS
ci/iol-intel-Performance success Performance Testing PASS
ci/iol-broadcom-Functional success Functional Testing PASS
ci/checkpatch success coding style OK

Commit Message

Steve Yang Jan. 14, 2021, 9:47 a.m. UTC
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition.
If the Ether overhead is larger than 18 when it supports VLAN tag,
that will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.

This fix will normalize the boundary condition with 'RTE_ETHER_MTU'
and overhead even though current overhead is 18.

Fixes: 59d0ecdbf0e1 ("ethdev: MTU accessors")
Fixes: 95a27b3ba5f5 ("net/ixgbe: enable jumbo frame for VF")

Acked-by: Jeff Guo <jia.guo@intel.com>

Signed-off-by: Steve Yang <stevex.yang@intel.com>
---
 drivers/net/ixgbe/ixgbe_ethdev.c | 2 +-
 drivers/net/ixgbe/ixgbe_ethdev.h | 3 +++
 drivers/net/ixgbe/ixgbe_pf.c     | 2 +-
 3 files changed, 5 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index d7a1806ab8..fa0f5afd03 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -5173,7 +5173,7 @@  ixgbe_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
 
 	/* switch to jumbo mode if needed */
-	if (frame_size > RTE_ETHER_MAX_LEN) {
+	if (frame_size > IXGBE_ETH_MAX_LEN) {
 		dev->data->dev_conf.rxmode.offloads |=
 			DEV_RX_OFFLOAD_JUMBO_FRAME;
 		hlreg0 |= IXGBE_HLREG0_JUMBOEN;
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index 3d35ea791b..a0ce18ca24 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -104,6 +104,9 @@ 
 /* The overhead from MTU to max frame size. */
 #define IXGBE_ETH_OVERHEAD (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN)
 
+/* The max frame size with default MTU */
+#define IXGBE_ETH_MAX_LEN  (RTE_ETHER_MTU + IXGBE_ETH_OVERHEAD)
+
 /* bit of VXLAN tunnel type | 7 bits of zeros  | 8 bits of zeros*/
 #define IXGBE_FDIR_VXLAN_TUNNEL_TYPE    0x8000
 /* bit of NVGRE tunnel type | 7 bits of zeros  | 8 bits of zeros*/
diff --git a/drivers/net/ixgbe/ixgbe_pf.c b/drivers/net/ixgbe/ixgbe_pf.c
index 833863af5a..89698e8470 100644
--- a/drivers/net/ixgbe/ixgbe_pf.c
+++ b/drivers/net/ixgbe/ixgbe_pf.c
@@ -575,7 +575,7 @@  ixgbe_set_vf_lpe(struct rte_eth_dev *dev, __rte_unused uint32_t vf, uint32_t *ms
 		   IXGBE_MHADD_MFS_MASK) >> IXGBE_MHADD_MFS_SHIFT;
 	if (max_frs < new_mtu) {
 		hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
-		if (new_mtu > RTE_ETHER_MAX_LEN) {
+		if (new_mtu > IXGBE_ETH_MAX_LEN) {
 			dev->data->dev_conf.rxmode.offloads |=
 				DEV_RX_OFFLOAD_JUMBO_FRAME;
 			hlreg0 |= IXGBE_HLREG0_JUMBOEN;