diff mbox series

[19/35] net/mlx5/windws: spawn eth devices

Message ID 20201217173037.11396-20-talshn@nvidia.com (mailing list archive)
State Superseded, archived
Delegated to: Raslan Darawsheh
Headers show
Series mlx5 Windows support - part #6 | expand

Checks

Context Check Description
ci/checkpatch warning coding style issues

Commit Message

Tal Shnaiderman Dec. 17, 2020, 5:30 p.m. UTC
From: Ophir Munk <ophirmu@nvidia.com>

This commit implements mlx5_dev_spawn() API which allocates an eth
device (struct rte_eth_dev) for each PCI device. When working with
representors virtual functions (as in Linux), one PCI device may spawn
several eth devices: the master device for the main physical function
(PF) and several representors for the virtual functions (VFs).  However,
currently Windows does not work in switch dev mode, therefore, no VFs
are created and no representors are spawned. In this case one eth device
is created per one PCI main port.  In addition to device creation - the
device configuration must be correctly set. The device arguments
(devargs - set by the user) are parsed but they may be overridden by
Windows limitations or hardware configurations. Some associated network
parameters are stored in eth device (e.g. ifindex, MAC address, MTU) and
some callback (e.g. burst functions) are set.

Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
---
 drivers/common/mlx5/windows/mlx5_win_defs.h |   6 +
 drivers/net/mlx5/windows/mlx5_os.c          | 456 +++++++++++++++++++++++++++-
 2 files changed, 457 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/common/mlx5/windows/mlx5_win_defs.h b/drivers/common/mlx5/windows/mlx5_win_defs.h
index e9569e4431..d8f20993e0 100644
--- a/drivers/common/mlx5/windows/mlx5_win_defs.h
+++ b/drivers/common/mlx5/windows/mlx5_win_defs.h
@@ -163,4 +163,10 @@  struct mlx5_wqe_data_seg {
 	rte_be32_t		lkey;
 	rte_be64_t		addr;
 };
+
+#define MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP	(1 << 4)
+#define IBV_DEVICE_RAW_IP_CSUM			(1 << 26)
+#define IBV_RAW_PACKET_CAP_CVLAN_STRIPPING	(1 << 0)
+#define IBV_RAW_PACKET_CAP_SCATTER_FCS		(1 << 1)
+#define IBV_QPT_RAW_PACKET			8
 #endif /* __MLX5_WIN_DEFS_H__ */
diff --git a/drivers/net/mlx5/windows/mlx5_os.c b/drivers/net/mlx5/windows/mlx5_os.c
index 7f7e2f8f7c..985729f2a6 100644
--- a/drivers/net/mlx5/windows/mlx5_os.c
+++ b/drivers/net/mlx5/windows/mlx5_os.c
@@ -26,6 +26,9 @@ 
 #include "mlx5_autoconf.h"
 #include "mlx5_mr.h"
 #include "mlx5_flow.h"
+#include "mlx5_devx.h"
+
+#define MLX5_TAGS_HLIST_ARRAY_SIZE 8192
 
 static const char *MZ_MLX5_PMD_SHARED_DATA = "mlx5_pmd_shared_data";
 
@@ -142,6 +145,42 @@  mlx5_os_get_dev_attr(void *ctx, struct mlx5_dev_attr *device_attr)
 	return err;
 }
 
+/**
+ * Initialize DR related data within private structure.
+ * Routine checks the reference counter and does actual
+ * resources creation/initialization only if counter is zero.
+ *
+ * @param[in] priv
+ *   Pointer to the private device data structure.
+ *
+ * @return
+ *   Zero on success, positive error code otherwise.
+ */
+static int
+mlx5_alloc_shared_dr(struct mlx5_priv *priv)
+{
+	struct mlx5_dev_ctx_shared *sh = priv->sh;
+	int err = 0;
+
+	if (!sh->flow_tbls)
+		err = mlx5_alloc_table_hash_list(priv);
+	else
+		DRV_LOG(DEBUG, "sh->flow_tbls[%p] already created, reuse\n",
+			(void *)sh->flow_tbls);
+	return err;
+}
+/**
+ * Destroy DR related data within private structure.
+ *
+ * @param[in] priv
+ *   Pointer to the private device data structure.
+ */
+void
+mlx5_os_free_shared_dr(struct mlx5_priv *priv)
+{
+	mlx5_free_table_hash_list(priv);
+}
+
 /**
  * Set the completion channel file descriptor interrupt as non-blocking.
  * Currently it has no support under Windows.
@@ -207,6 +246,45 @@  mlx5_os_open_device(const struct mlx5_dev_spawn_data *spawn,
 	return err;
 }
 
+/**
+ * DV flow counter mode detect and config.
+ *
+ * @param dev
+ *   Pointer to rte_eth_dev structure.
+ *
+ */
+static void
+mlx5_flow_counter_mode_config(struct rte_eth_dev *dev __rte_unused)
+{
+#ifdef HAVE_IBV_FLOW_DV_SUPPORT
+	struct mlx5_priv *priv = dev->data->dev_private;
+	struct mlx5_dev_ctx_shared *sh = priv->sh;
+	bool fallback;
+
+#ifndef HAVE_IBV_DEVX_ASYNC
+	fallback = true;
+#else
+	fallback = false;
+	if (!priv->config.devx || !priv->config.dv_flow_en ||
+	    !priv->config.hca_attr.flow_counters_dump ||
+	    !(priv->config.hca_attr.flow_counter_bulk_alloc_bitmap & 0x4) ||
+	    (mlx5_flow_dv_discover_counter_offset_support(dev) == -ENOTSUP))
+		fallback = true;
+#endif
+	if (fallback)
+		DRV_LOG(INFO, "Use fall-back DV counter management. Flow "
+			"counter dump:%d, bulk_alloc_bitmap:0x%hhx.",
+			priv->config.hca_attr.flow_counters_dump,
+			priv->config.hca_attr.flow_counter_bulk_alloc_bitmap);
+	/* Initialize fallback mode only on the port initializes sh. */
+	if (sh->refcnt == 1)
+		sh->cmng.counter_fallback = fallback;
+	else if (fallback != sh->cmng.counter_fallback)
+		DRV_LOG(WARNING, "Port %d in sh has different fallback mode "
+			"with others:%d.", PORT_ID(priv), fallback);
+#endif
+}
+
 /**
  * Spawn an Ethernet device from Verbs information.
  *
@@ -218,17 +296,385 @@  mlx5_os_open_device(const struct mlx5_dev_spawn_data *spawn,
  *   Device configuration parameters.
  *
  * @return
- *   NULL pointer. Operation is not supported and rte_errno is set to ENOTSUP.
+ *   A valid Ethernet device object on success, NULL otherwise and rte_errno
+ *   is set. The following errors are defined:
+ *
+ *   EEXIST: device is already spawned
  */
 static struct rte_eth_dev *
 mlx5_dev_spawn(struct rte_device *dpdk_dev,
 	       struct mlx5_dev_spawn_data *spawn,
 	       struct mlx5_dev_config *config)
 {
-	(void)dpdk_dev;
-	(void)spawn;
-	(void)config;
-	rte_errno = -ENOTSUP;
+	const struct mlx5_switch_info *switch_info = &spawn->info;
+	struct mlx5_dev_ctx_shared *sh = NULL;
+	struct mlx5_dev_attr device_attr;
+	struct rte_eth_dev *eth_dev = NULL;
+	struct mlx5_priv *priv = NULL;
+	int err = 0;
+	unsigned int cqe_comp;
+	unsigned int cqe_pad = 0;
+	struct rte_ether_addr mac;
+	char name[RTE_ETH_NAME_MAX_LEN];
+	int own_domain_id = 0;
+	uint16_t port_id;
+
+	/* Build device name. */
+	strlcpy(name, dpdk_dev->name, sizeof(name));
+	/* check if the device is already spawned */
+	if (rte_eth_dev_get_port_by_name(name, &port_id) == 0) {
+		rte_errno = EEXIST;
+		return NULL;
+	}
+	DRV_LOG(DEBUG, "naming Ethernet device \"%s\"", name);
+	/*
+	 * Some parameters are needed in advance to create device context. We
+	 * process the devargs here to get ones, and later process devargs
+	 * again to override some hardware settings.
+	 */
+	err = mlx5_args(config, dpdk_dev->devargs);
+	if (err) {
+		err = rte_errno;
+		DRV_LOG(ERR, "failed to process device arguments: %s",
+			strerror(rte_errno));
+		goto error;
+	}
+	mlx5_malloc_mem_select(config->sys_mem_en);
+	sh = mlx5_alloc_shared_dev_ctx(spawn, config);
+	if (!sh)
+		return NULL;
+	config->devx = sh->devx;
+	/* Initialize the shutdown event in mlx5_dev_spawn to
+	 * support mlx5_is_removed for Windows.
+	 */
+	err = mlx5_glue->devx_init_showdown_event(sh->ctx);
+	if (err) {
+		DRV_LOG(ERR, "failed to init showdown event: %s",
+			strerror(errno));
+		goto error;
+	}
+	DRV_LOG(DEBUG, "MPW isn't supported");
+	mlx5_os_get_dev_attr(sh->ctx, &device_attr);
+	config->swp = 0;
+	config->ind_table_max_size =
+		sh->device_attr.max_rwq_indirection_table_size;
+	if (RTE_CACHE_LINE_SIZE == 128 &&
+	    !(device_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP))
+		cqe_comp = 0;
+	else
+		cqe_comp = 1;
+	config->cqe_comp = cqe_comp;
+	DRV_LOG(DEBUG, "tunnel offloading is not supported");
+	config->tunnel_en = 0;
+	DRV_LOG(DEBUG, "MPLS over GRE/UDP tunnel offloading is no supported");
+	config->mpls_en = 0;
+	/* Allocate private eth device data. */
+	priv = mlx5_malloc(MLX5_MEM_ZERO | MLX5_MEM_RTE,
+			   sizeof(*priv),
+			   RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
+	if (priv == NULL) {
+		DRV_LOG(ERR, "priv allocation failure");
+		err = ENOMEM;
+		goto error;
+	}
+	priv->sh = sh;
+	priv->dev_port = spawn->phys_port;
+	priv->pci_dev = spawn->pci_dev;
+	priv->mtu = RTE_ETHER_MTU;
+	priv->mp_id.port_id = port_id;
+	strlcpy(priv->mp_id.name, MLX5_MP_NAME, RTE_MP_MAX_NAME_LEN);
+	priv->representor = !!switch_info->representor;
+	priv->master = !!switch_info->master;
+	priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
+	priv->vport_meta_tag = 0;
+	priv->vport_meta_mask = 0;
+	priv->pf_bond = spawn->pf_bond;
+	priv->vport_id = -1;
+	/* representor_id field keeps the unmodified VF index. */
+	priv->representor_id = -1;
+	/*
+	 * Look for sibling devices in order to reuse their switch domain
+	 * if any, otherwise allocate one.
+	 */
+	MLX5_ETH_FOREACH_DEV(port_id, priv->pci_dev) {
+		const struct mlx5_priv *opriv =
+			rte_eth_devices[port_id].data->dev_private;
+
+		if (!opriv ||
+		    opriv->sh != priv->sh ||
+			opriv->domain_id ==
+			RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID)
+			continue;
+		priv->domain_id = opriv->domain_id;
+		break;
+	}
+	if (priv->domain_id == RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
+		err = rte_eth_switch_domain_alloc(&priv->domain_id);
+		if (err) {
+			err = rte_errno;
+			DRV_LOG(ERR, "unable to allocate switch domain: %s",
+				strerror(rte_errno));
+			goto error;
+		}
+		own_domain_id = 1;
+	}
+	/* Override some values set by hardware configuration. */
+	mlx5_args(config, dpdk_dev->devargs);
+	err = mlx5_dev_check_sibling_config(priv, config);
+	if (err)
+		goto error;
+	config->hw_csum = !!(sh->device_attr.device_cap_flags_ex &
+			    IBV_DEVICE_RAW_IP_CSUM);
+	DRV_LOG(DEBUG, "checksum offloading is %ssupported",
+		(config->hw_csum ? "" : "not "));
+	DRV_LOG(DEBUG, "counters are not supported");
+	config->ind_table_max_size =
+		sh->device_attr.max_rwq_indirection_table_size;
+	/*
+	 * Remove this check once DPDK supports larger/variable
+	 * indirection tables.
+	 */
+	if (config->ind_table_max_size > (unsigned int)ETH_RSS_RETA_SIZE_512)
+		config->ind_table_max_size = ETH_RSS_RETA_SIZE_512;
+	DRV_LOG(DEBUG, "maximum Rx indirection table size is %u",
+		config->ind_table_max_size);
+	config->hw_vlan_strip = !!(sh->device_attr.raw_packet_caps &
+				  IBV_RAW_PACKET_CAP_CVLAN_STRIPPING);
+	DRV_LOG(DEBUG, "VLAN stripping is %ssupported",
+		(config->hw_vlan_strip ? "" : "not "));
+	config->hw_fcs_strip = !!(sh->device_attr.raw_packet_caps &
+				 IBV_RAW_PACKET_CAP_SCATTER_FCS);
+	if (config->hw_padding) {
+		DRV_LOG(DEBUG, "Rx end alignment padding isn't supported");
+		config->hw_padding = 0;
+	}
+	config->tso = (sh->device_attr.max_tso > 0 &&
+		      (sh->device_attr.tso_supported_qpts &
+		       (1 << IBV_QPT_RAW_PACKET)));
+	if (config->tso)
+		config->tso_max_payload_sz = sh->device_attr.max_tso;
+	DRV_LOG(DEBUG, "%sMPS is %s.",
+		config->mps == MLX5_MPW_ENHANCED ? "enhanced " :
+		config->mps == MLX5_MPW ? "legacy " : "",
+		config->mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
+	if (config->cqe_comp && !cqe_comp) {
+		DRV_LOG(WARNING, "Rx CQE compression isn't supported.");
+		config->cqe_comp = 0;
+	}
+	if (config->cqe_pad && !cqe_pad) {
+		DRV_LOG(WARNING, "Rx CQE padding isn't supported.");
+		config->cqe_pad = 0;
+	} else if (config->cqe_pad) {
+		DRV_LOG(INFO, "Rx CQE padding is enabled.");
+	}
+	if (config->devx) {
+		err = mlx5_devx_cmd_query_hca_attr(sh->ctx, &config->hca_attr);
+		if (err) {
+			err = -err;
+			goto error;
+		}
+		/* Check relax ordering support. */
+		sh->cmng.relaxed_ordering_read = 0;
+		sh->cmng.relaxed_ordering_write = 0;
+		if (!haswell_broadwell_cpu) {
+			sh->cmng.relaxed_ordering_write =
+				config->hca_attr.relaxed_ordering_write;
+			sh->cmng.relaxed_ordering_read =
+				config->hca_attr.relaxed_ordering_read;
+		}
+	}
+	if (config->devx) {
+		uint32_t reg[MLX5_ST_SZ_DW(register_mtutc)];
+
+		err = config->hca_attr.access_register_user ?
+			mlx5_devx_cmd_register_read
+				(sh->ctx, MLX5_REGISTER_ID_MTUTC, 0,
+				reg, MLX5_ST_SZ_DW(register_mtutc)) : ENOTSUP;
+		if (!err) {
+			uint32_t ts_mode;
+
+			/* MTUTC register is read successfully. */
+			ts_mode = MLX5_GET(register_mtutc, reg,
+					   time_stamp_mode);
+			if (ts_mode == MLX5_MTUTC_TIMESTAMP_MODE_REAL_TIME)
+				config->rt_timestamp = 1;
+		} else {
+			/* Kernel does not support register reading. */
+			if (config->hca_attr.dev_freq_khz ==
+						 (NS_PER_S / MS_PER_S))
+				config->rt_timestamp = 1;
+		}
+	}
+	if (config->mprq.enabled) {
+		DRV_LOG(WARNING, "Multi-Packet RQ isn't supported");
+		config->mprq.enabled = 0;
+	}
+	if (config->max_dump_files_num == 0)
+		config->max_dump_files_num = 128;
+	eth_dev = rte_eth_dev_allocate(name);
+	if (eth_dev == NULL) {
+		DRV_LOG(ERR, "can not allocate rte ethdev");
+		err = ENOMEM;
+		goto error;
+	}
+	if (priv->representor) {
+		eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
+		eth_dev->data->representor_id = priv->representor_id;
+	}
+	/*
+	 * Store associated network device interface index. This index
+	 * is permanent throughout the lifetime of device. So, we may store
+	 * the ifindex here and use the cached value further.
+	 */
+	MLX5_ASSERT(spawn->ifindex);
+	priv->if_index = spawn->ifindex;
+	eth_dev->data->dev_private = priv;
+	priv->dev_data = eth_dev->data;
+	eth_dev->data->mac_addrs = priv->mac;
+	eth_dev->device = dpdk_dev;
+	eth_dev->data->dev_flags |= RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
+	/* Configure the first MAC address by default. */
+	if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) {
+		DRV_LOG(ERR,
+			"port %u cannot get MAC address, is mlx5_en"
+			" loaded? (errno: %s).",
+			eth_dev->data->port_id, strerror(rte_errno));
+		err = ENODEV;
+		goto error;
+	}
+	DRV_LOG(INFO,
+		"port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+		eth_dev->data->port_id,
+		mac.addr_bytes[0], mac.addr_bytes[1],
+		mac.addr_bytes[2], mac.addr_bytes[3],
+		mac.addr_bytes[4], mac.addr_bytes[5]);
+#ifdef RTE_LIBRTE_MLX5_DEBUG
+	{
+		char ifname[IF_NAMESIZE];
+
+		if (mlx5_get_ifname(eth_dev, &ifname) == 0)
+			DRV_LOG(DEBUG, "port %u ifname is \"%s\"",
+				eth_dev->data->port_id, ifname);
+		else
+			DRV_LOG(DEBUG, "port %u ifname is unknown.",
+				eth_dev->data->port_id);
+	}
+#endif
+	/* Get actual MTU if possible. */
+	err = mlx5_get_mtu(eth_dev, &priv->mtu);
+	if (err) {
+		err = rte_errno;
+		goto error;
+	}
+	DRV_LOG(DEBUG, "port %u MTU is %u.", eth_dev->data->port_id,
+		priv->mtu);
+	/* Initialize burst functions to prevent crashes before link-up. */
+	eth_dev->rx_pkt_burst = removed_rx_burst;
+	eth_dev->tx_pkt_burst = removed_tx_burst;
+	eth_dev->dev_ops = &mlx5_os_dev_ops;
+	eth_dev->rx_descriptor_status = mlx5_rx_descriptor_status;
+	eth_dev->tx_descriptor_status = mlx5_tx_descriptor_status;
+	eth_dev->rx_queue_count = mlx5_rx_queue_count;
+	/* Register MAC address. */
+	claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
+	priv->flows = 0;
+	priv->ctrl_flows = 0;
+	TAILQ_INIT(&priv->flow_meters);
+	TAILQ_INIT(&priv->flow_meter_profiles);
+	/* Bring Ethernet device up. */
+	DRV_LOG(DEBUG, "port %u forcing Ethernet interface up.",
+		eth_dev->data->port_id);
+	/* nl calls are unsupported - set to -1 not to fail on release */
+	priv->nl_socket_rdma = -1;
+	priv->nl_socket_route = -1;
+	mlx5_set_link_up(eth_dev);
+	/*
+	 * Even though the interrupt handler is not installed yet,
+	 * interrupts will still trigger on the async_fd from
+	 * Verbs context returned by ibv_open_device().
+	 */
+	mlx5_link_update(eth_dev, 0);
+	config->dv_esw_en = 0;
+	/* Detect minimal data bytes to inline. */
+	mlx5_set_min_inline(spawn, config);
+	/* Store device configuration on private structure. */
+	priv->config = *config;
+	/* Create context for virtual machine VLAN workaround. */
+	priv->vmwa_context = NULL;
+	if (config->dv_flow_en) {
+		err = mlx5_alloc_shared_dr(priv);
+		if (err)
+			goto error;
+	}
+	/* No supported flow priority number detection. */
+	priv->config.flow_prio = -1;
+	if (!priv->config.dv_esw_en &&
+	    priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
+		DRV_LOG(WARNING, "metadata mode %u is not supported "
+				 "(no E-Switch)", priv->config.dv_xmeta_en);
+		priv->config.dv_xmeta_en = MLX5_XMETA_MODE_LEGACY;
+	}
+	mlx5_set_metadata_mask(eth_dev);
+	if (priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
+	    !priv->sh->dv_regc0_mask) {
+		DRV_LOG(ERR, "metadata mode %u is not supported "
+			     "(no metadata reg_c[0] is available).",
+			     priv->config.dv_xmeta_en);
+			err = ENOTSUP;
+			goto error;
+	}
+	mlx5_cache_list_init(&priv->hrxqs, "hrxq", 0, eth_dev,
+			     mlx5_hrxq_create_cb,
+			     mlx5_hrxq_match_cb,
+			     mlx5_hrxq_remove_cb);
+	/* Query availability of metadata reg_c's. */
+	err = mlx5_flow_discover_mreg_c(eth_dev);
+	if (err < 0) {
+		err = -err;
+		goto error;
+	}
+	if (!mlx5_flow_ext_mreg_supported(eth_dev)) {
+		DRV_LOG(DEBUG,
+			"port %u extensive metadata register is not supported.",
+			eth_dev->data->port_id);
+		if (priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
+			DRV_LOG(ERR, "metadata mode %u is not supported "
+				     "(no metadata registers available).",
+				     priv->config.dv_xmeta_en);
+			err = ENOTSUP;
+			goto error;
+		}
+	}
+	if (config->devx && config->dv_flow_en) {
+		priv->obj_ops = devx_obj_ops;
+	} else {
+		DRV_LOG(ERR, "Flow mode %u is not supported "
+				"(Windows flow must be DevX with DV flow enabled).",
+				priv->config.dv_flow_en);
+		err = ENOTSUP;
+		goto error;
+	}
+	mlx5_flow_counter_mode_config(eth_dev);
+	return eth_dev;
+error:
+	if (priv) {
+		if (own_domain_id)
+			claim_zero(rte_eth_switch_domain_free(priv->domain_id));
+		mlx5_free(priv);
+		if (eth_dev != NULL)
+			eth_dev->data->dev_private = NULL;
+	}
+	if (eth_dev != NULL) {
+		/* mac_addrs must not be freed alone because part of
+		 * dev_private
+		 **/
+		eth_dev->data->mac_addrs = NULL;
+		rte_eth_dev_release_port(eth_dev);
+	}
+	if (sh)
+		mlx5_free_shared_dev_ctx(sh);
+	MLX5_ASSERT(err > 0);
+	rte_errno = err;
 	return NULL;
 }