diff mbox series

[v3,4/5] net/i40e: fix max mtu size packets with vlan tag cannot be received by default

Message ID 20200923040909.73418-5-stevex.yang@intel.com (mailing list archive)
State Changes Requested, archived
Delegated to: Qi Zhang
Headers
Series fix default max mtu size when device configured |

Checks

Context Check Description
ci/checkpatch success coding style OK

Commit Message

Steve Yang Sept. 23, 2020, 4:09 a.m. UTC 
  testpmd will initialize default max packet length to 1518 which doesn't
include vlan tag size in ether overheader. Once, send the max mtu length
packet with vlan tag, the max packet length will exceed 1518 that will
cause packets dropped directly from NIC hw side. But for i40e/i40evf,
they should support dual vlan tags that need more 8 bytes for max packet
size, so, configure the correct max packet size in dev_config ops.

Fixes: ff8282f4bbcd ("net/i40e: consider QinQ when setting MTU")

Signed-off-by: SteveX Yang <stevex.yang@intel.com>
---
 drivers/net/i40e/i40e_ethdev.c    | 5 +++++
 drivers/net/i40e/i40e_ethdev_vf.c | 5 +++++
 2 files changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 6439baf2f..6b8acd07f 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -1930,6 +1930,11 @@  i40e_dev_configure(struct rte_eth_dev *dev)
 	ad->tx_simple_allowed = true;
 	ad->tx_vec_allowed = true;
 
+	/* Considering QinQ packet, max frame size should be MTU and
+	 * corresponding ether overhead.
+	 */
+	i40e_dev_mtu_set(dev, dev->data->mtu);
+
 	if (dev->data->dev_conf.rxmode.mq_mode & ETH_MQ_RX_RSS_FLAG)
 		dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_RSS_HASH;
 
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 8531cf6b1..12e85ba26 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -1681,6 +1681,11 @@  i40evf_dev_configure(struct rte_eth_dev *dev)
 	dev->data->dev_conf.intr_conf.lsc =
 		!!(dev->data->dev_flags & RTE_ETH_DEV_INTR_LSC);
 
+	/* Considering QinQ packet, max frame size should be MTU and
+	 * corresponding ether overhead.
+	 */
+	i40evf_dev_mtu_set(dev, dev->data->mtu);
+
 	if (num_queue_pairs > vf->vsi_res->num_queue_pairs) {
 		struct i40e_hw *hw;
 		int ret;