[09/11] net/hns3: fix default MAC addr from firmware
Checks
Commit Message
From: Huisong Li <lihuisong@huawei.com>
Currently, default MAC address obtained from firmware in hns3 PF PMD driver
is directly used by .mac_addr_set ops implementation function when the
rte_eth_dev_start API function is executed. At this moment, if the default
MAC addr isn't an unicast address, it will fail to set default MAC addr to
hardware.
So this patch adds the validity check of default MAC addr in hns3 PF PMD
driver. We will use a random unicast address, if the default MAC address
obtained from firmware is not a vailid unicast address.
In addition, this patch also adjusts the location of processing default MAC
addr in hns3 VF PMD driver so as to increase relevance and readability of
the code.
Fixes: eab21776717 ("net/hns3: support setting VF MAC address by PF driver")
Fixes: d51867db65c ("net/hns3: add initialization")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
---
drivers/net/hns3/hns3_ethdev.c | 11 +++++++++++
drivers/net/hns3/hns3_ethdev_vf.c | 29 ++++++++++++++---------------
2 files changed, 25 insertions(+), 15 deletions(-)
@@ -5574,6 +5574,8 @@ static int
hns3_dev_init(struct rte_eth_dev *eth_dev)
{
struct hns3_adapter *hns = eth_dev->data->dev_private;
+ char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
+ struct rte_ether_addr *eth_addr;
struct hns3_hw *hw = &hns->hw;
int ret;
@@ -5646,6 +5648,15 @@ hns3_dev_init(struct rte_eth_dev *eth_dev)
goto err_rte_zmalloc;
}
+ eth_addr = (struct rte_ether_addr *)hw->mac.mac_addr;
+ if (!rte_is_valid_assigned_ether_addr(eth_addr)) {
+ rte_eth_random_addr(hw->mac.mac_addr);
+ rte_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
+ (struct rte_ether_addr *)hw->mac.mac_addr);
+ hns3_warn(hw, "default mac_addr from firmware is an invalid "
+ "unicast address, using random MAC address %s",
+ mac_str);
+ }
rte_ether_addr_copy((struct rte_ether_addr *)hw->mac.mac_addr,
ð_dev->data->mac_addrs[0]);
@@ -1748,21 +1748,6 @@ hns3vf_init_vf(struct rte_eth_dev *eth_dev)
goto err_get_config;
}
- /*
- * The hns3 PF ethdev driver in kernel support setting VF MAC address
- * on the host by "ip link set ..." command. To avoid some incorrect
- * scenes, for example, hns3 VF PMD driver fails to receive and send
- * packets after user configure the MAC address by using the
- * "ip link set ..." command, hns3 VF PMD driver keep the same MAC
- * address strategy as the hns3 kernel ethdev driver in the
- * initialization. If user configure a MAC address by the ip command
- * for VF device, then hns3 VF PMD driver will start with it, otherwise
- * start with a random MAC address in the initialization.
- */
- ret = rte_is_zero_ether_addr((struct rte_ether_addr *)hw->mac.mac_addr);
- if (ret)
- rte_eth_random_addr(hw->mac.mac_addr);
-
ret = hns3vf_clear_vport_list(hw);
if (ret) {
PMD_INIT_LOG(ERR, "Failed to clear tbl list: %d", ret);
@@ -2644,8 +2629,22 @@ hns3vf_dev_init(struct rte_eth_dev *eth_dev)
goto err_rte_zmalloc;
}
+ /*
+ * The hns3 PF ethdev driver in kernel support setting VF MAC address
+ * on the host by "ip link set ..." command. To avoid some incorrect
+ * scenes, for example, hns3 VF PMD driver fails to receive and send
+ * packets after user configure the MAC address by using the
+ * "ip link set ..." command, hns3 VF PMD driver keep the same MAC
+ * address strategy as the hns3 kernel ethdev driver in the
+ * initialization. If user configure a MAC address by the ip command
+ * for VF device, then hns3 VF PMD driver will start with it, otherwise
+ * start with a random MAC address in the initialization.
+ */
+ if (rte_is_zero_ether_addr((struct rte_ether_addr *)hw->mac.mac_addr))
+ rte_eth_random_addr(hw->mac.mac_addr);
rte_ether_addr_copy((struct rte_ether_addr *)hw->mac.mac_addr,
ð_dev->data->mac_addrs[0]);
+
hw->adapter_state = HNS3_NIC_INITIALIZED;
/*
* Pass the information to the rte_eth_dev_close() that it should also