There is a need to enable MIB change event, not at the same time as
init_dcb. This patch will serve this requirement.
Modify the i40e_init_dcb to return the correct error when LLDP or DCBX
is not in operational state.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
---
drivers/net/i40e/base/i40e_dcb.c | 28 +++++++++++-----------------
drivers/net/i40e/base/i40e_dcb.h | 3 ++-
drivers/net/i40e/i40e_ethdev.c | 4 ++--
3 files changed, 15 insertions(+), 20 deletions(-)
@@ -863,22 +863,23 @@ enum i40e_status_code i40e_get_dcb_config(struct i40e_hw *hw)
/**
* i40e_init_dcb
* @hw: pointer to the hw struct
+ * @enable_mib_change: enable mib change event
*
* Update DCB configuration from the Firmware
**/
-enum i40e_status_code i40e_init_dcb(struct i40e_hw *hw)
+enum i40e_status_code i40e_init_dcb(struct i40e_hw *hw, bool enable_mib_change)
{
enum i40e_status_code ret = I40E_SUCCESS;
struct i40e_lldp_variables lldp_cfg;
u8 adminstatus = 0;
if (!hw->func_caps.dcb)
- return ret;
+ return I40E_NOT_SUPPORTED;
/* Read LLDP NVM area */
ret = i40e_read_lldp_cfg(hw, &lldp_cfg);
if (ret)
- return ret;
+ return I40E_ERR_NOT_READY;
/* Get the LLDP AdminStatus for the current port */
adminstatus = lldp_cfg.adminstatus >> (hw->port * 4);
@@ -887,7 +888,7 @@ enum i40e_status_code i40e_init_dcb(struct i40e_hw *hw)
/* LLDP agent disabled */
if (!adminstatus) {
hw->dcbx_status = I40E_DCBX_STATUS_DISABLED;
- return ret;
+ return I40E_ERR_NOT_READY;
}
/* Get DCBX status */
@@ -896,26 +897,19 @@ enum i40e_status_code i40e_init_dcb(struct i40e_hw *hw)
return ret;
/* Check the DCBX Status */
- switch (hw->dcbx_status) {
- case I40E_DCBX_STATUS_DONE:
- case I40E_DCBX_STATUS_IN_PROGRESS:
+ if (hw->dcbx_status == I40E_DCBX_STATUS_DONE ||
+ hw->dcbx_status == I40E_DCBX_STATUS_IN_PROGRESS) {
/* Get current DCBX configuration */
ret = i40e_get_dcb_config(hw);
if (ret)
return ret;
- break;
- case I40E_DCBX_STATUS_DISABLED:
- return ret;
- case I40E_DCBX_STATUS_NOT_STARTED:
- case I40E_DCBX_STATUS_MULTIPLE_PEERS:
- default:
- break;
+ } else if (hw->dcbx_status == I40E_DCBX_STATUS_DISABLED) {
+ return I40E_ERR_NOT_READY;
}
/* Configure the LLDP MIB change event */
- ret = i40e_aq_cfg_lldp_mib_change_event(hw, true, NULL);
- if (ret)
- return ret;
+ if (enable_mib_change)
+ ret = i40e_aq_cfg_lldp_mib_change_event(hw, true, NULL);
return ret;
}
@@ -186,7 +186,8 @@ enum i40e_status_code i40e_aq_get_dcb_config(struct i40e_hw *hw, u8 mib_type,
u8 bridgetype,
struct i40e_dcbx_config *dcbcfg);
enum i40e_status_code i40e_get_dcb_config(struct i40e_hw *hw);
-enum i40e_status_code i40e_init_dcb(struct i40e_hw *hw);
+enum i40e_status_code i40e_init_dcb(struct i40e_hw *hw,
+ bool enable_mib_change);
enum i40e_status_code i40e_set_dcb_config(struct i40e_hw *hw);
enum i40e_status_code i40e_dcb_config_to_lldp(u8 *lldpmib, u16 *miblen,
struct i40e_dcbx_config *dcbcfg);
@@ -11582,7 +11582,7 @@ i40e_dcb_init_configure(struct rte_eth_dev *dev, bool sw_dcb)
PMD_INIT_LOG(DEBUG, "Failed to stop lldp");
}
- ret = i40e_init_dcb(hw);
+ ret = i40e_init_dcb(hw, true);
/* If lldp agent is stopped, the return value from
* i40e_init_dcb we expect is failure with I40E_AQ_RC_EPERM
* adminq status. Otherwise, it should return success.
@@ -11630,7 +11630,7 @@ i40e_dcb_init_configure(struct rte_eth_dev *dev, bool sw_dcb)
if (ret != I40E_SUCCESS)
PMD_INIT_LOG(DEBUG, "Failed to start lldp");
- ret = i40e_init_dcb(hw);
+ ret = i40e_init_dcb(hw, true);
if (!ret) {
if (hw->dcbx_status == I40E_DCBX_STATUS_DISABLED) {
PMD_INIT_LOG(ERR,