diff --git a/drivers/net/bnxt/bnxt_stats.c b/drivers/net/bnxt/bnxt_stats.c
index a5d3c8660..f7e6ce4b2 100644
--- a/drivers/net/bnxt/bnxt_stats.c
+++ b/drivers/net/bnxt/bnxt_stats.c
@@ -26,8 +26,8 @@ static const struct bnxt_xstats_name_off bnxt_rx_stats_strings[] = {
 				rx_256b_511b_frames)},
 	{"rx_512b_1023b_frames", offsetof(struct rx_port_stats,
 				rx_512b_1023b_frames)},
-	{"rx_1024b_1518_frames", offsetof(struct rx_port_stats,
-				rx_1024b_1518_frames)},
+	{"rx_1024b_1518b_frames", offsetof(struct rx_port_stats,
+				rx_1024b_1518b_frames)},
 	{"rx_good_vlan_frames", offsetof(struct rx_port_stats,
 				rx_good_vlan_frames)},
 	{"rx_1519b_2047b_frames", offsetof(struct rx_port_stats,
@@ -93,12 +93,12 @@ static const struct bnxt_xstats_name_off bnxt_tx_stats_strings[] = {
 				tx_256b_511b_frames)},
 	{"tx_512b_1023b_frames", offsetof(struct tx_port_stats,
 				tx_512b_1023b_frames)},
-	{"tx_1024b_1518_frames", offsetof(struct tx_port_stats,
-				tx_1024b_1518_frames)},
+	{"tx_1024b_1518b_frames", offsetof(struct tx_port_stats,
+				tx_1024b_1518b_frames)},
 	{"tx_good_vlan_frames", offsetof(struct tx_port_stats,
 				tx_good_vlan_frames)},
-	{"tx_1519b_2047_frames", offsetof(struct tx_port_stats,
-				tx_1519b_2047_frames)},
+	{"tx_1519b_2047b_frames", offsetof(struct tx_port_stats,
+				tx_1519b_2047b_frames)},
 	{"tx_2048b_4095b_frames", offsetof(struct tx_port_stats,
 				tx_2048b_4095b_frames)},
 	{"tx_4096b_9216b_frames", offsetof(struct tx_port_stats,
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index f5c7b4228..a433e6bfd 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -67,6 +67,10 @@ struct hwrm_resp_hdr {
 #define TLV_TYPE_HWRM_RESPONSE                   UINT32_C(0x2)
 /* RoCE slow path command */
 #define TLV_TYPE_ROCE_SP_COMMAND                 UINT32_C(0x3)
+/* RoCE slow path command to query CC Gen1 support. */
+#define TLV_TYPE_QUERY_ROCE_CC_GEN1              UINT32_C(0xcommand 0x0005)
+/* RoCE slow path command to modify CC Gen1 support. */
+#define TLV_TYPE_MODIFY_ROCE_CC_GEN1             UINT32_C(0xcommand 0x0005)
 /* Engine CKV - The device's serial number. */
 #define TLV_TYPE_ENGINE_CKV_DEVICE_SERIAL_NUMBER UINT32_C(0x8001)
 /* Engine CKV - Per-function random nonce data. */
@@ -256,6 +260,7 @@ struct cmd_nums {
 	 */
 	uint16_t	req_type;
 	#define HWRM_VER_GET                              UINT32_C(0x0)
+	#define HWRM_FUNC_DRV_IF_CHANGE                   UINT32_C(0xd)
 	#define HWRM_FUNC_BUF_UNRGTR                      UINT32_C(0xe)
 	#define HWRM_FUNC_VF_CFG                          UINT32_C(0xf)
 	/* Reserved for future use. */
@@ -328,6 +333,7 @@ struct cmd_nums {
 	#define HWRM_RING_FREE                            UINT32_C(0x51)
 	#define HWRM_RING_CMPL_RING_QAGGINT_PARAMS        UINT32_C(0x52)
 	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS     UINT32_C(0x53)
+	#define HWRM_RING_AGGINT_QCAPS                    UINT32_C(0x54)
 	#define HWRM_RING_RESET                           UINT32_C(0x5e)
 	#define HWRM_RING_GRP_ALLOC                       UINT32_C(0x60)
 	#define HWRM_RING_GRP_FREE                        UINT32_C(0x61)
@@ -367,6 +373,8 @@ struct cmd_nums {
 	#define HWRM_PORT_QSTATS_EXT                      UINT32_C(0xb4)
 	#define HWRM_FW_RESET                             UINT32_C(0xc0)
 	#define HWRM_FW_QSTATUS                           UINT32_C(0xc1)
+	#define HWRM_FW_HEALTH_CHECK                      UINT32_C(0xc2)
+	#define HWRM_FW_SYNC                              UINT32_C(0xc3)
 	/* Experimental */
 	#define HWRM_FW_SET_TIME                          UINT32_C(0xc8)
 	/* Experimental */
@@ -433,6 +441,7 @@ struct cmd_nums {
 	/* Experimental */
 	#define HWRM_FW_IPC_MSG                           UINT32_C(0x110)
 	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO        UINT32_C(0x111)
+	#define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE       UINT32_C(0x112)
 	/* Engine CKV - Ping the device and SRT firmware to get the public key. */
 	#define HWRM_ENGINE_CKV_HELLO                     UINT32_C(0x12d)
 	/* Engine CKV - Get the current allocation status of keys provisioned in the key vault. */
@@ -515,6 +524,10 @@ struct cmd_nums {
 	#define HWRM_FUNC_BACKING_STORE_CFG               UINT32_C(0x193)
 	/* Experimental */
 	#define HWRM_FUNC_BACKING_STORE_QCFG              UINT32_C(0x194)
+	/* Configures the BW of any VF */
+	#define HWRM_FUNC_VF_BW_CFG                       UINT32_C(0x195)
+	/* Queries the BW of any VF */
+	#define HWRM_FUNC_VF_BW_QCFG                      UINT32_C(0x196)
 	/* Experimental */
 	#define HWRM_SELFTEST_QLIST                       UINT32_C(0x200)
 	/* Experimental */
@@ -544,8 +557,12 @@ struct cmd_nums {
 	#define HWRM_DBG_COREDUMP_INITIATE                UINT32_C(0xff18)
 	/* Experimental */
 	#define HWRM_DBG_COREDUMP_RETRIEVE                UINT32_C(0xff19)
+	/* Experimental */
+	#define HWRM_DBG_FW_CLI                           UINT32_C(0xff1a)
 	/*  */
 	#define HWRM_DBG_I2C_CMD                          UINT32_C(0xff1b)
+	/*  */
+	#define HWRM_DBG_RING_INFO_GET                    UINT32_C(0xff1c)
 	/* Experimental */
 	#define HWRM_NVM_FACTORY_DEFAULTS                 UINT32_C(0xffee)
 	#define HWRM_NVM_VALIDATE_OPTION                  UINT32_C(0xffef)
@@ -615,6 +632,11 @@ struct ret_codes {
 	 * should retry the request.
 	 */
 	#define HWRM_ERR_CODE_NO_BUFFER              UINT32_C(0x8)
+	/*
+	 * This error code is only reported by firmware when some
+	 * sub-option of a supported HWRM command is unsupported.
+	 */
+	#define HWRM_ERR_CODE_UNSUPPORTED_OPTION_ERR UINT32_C(0x9)
 	/*
 	 * Generic HWRM execution error that represents an
 	 * internal error.
@@ -686,8 +708,8 @@ struct hwrm_err_output {
 #define HWRM_VERSION_MINOR 9
 #define HWRM_VERSION_UPDATE 2
 /* non-zero means beta version */
-#define HWRM_VERSION_RSVD 9
-#define HWRM_VERSION_STR "1.9.2.9"
+#define HWRM_VERSION_RSVD 53
+#define HWRM_VERSION_STR "1.9.2.53"
 
 /****************
  * hwrm_ver_get *
@@ -901,6 +923,42 @@ struct hwrm_ver_get_output {
 	 */
 	#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SHORT_CMD_REQUIRED \
 		UINT32_C(0x8)
+	/*
+	 * If set to 1, then the KONG host mailbox channel is supported.
+	 * If set to 0, then the KONG host mailbox channel is not supported.
+	 * By default, this flag should be 0 for older version of core firmware.
+	 */
+	#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_KONG_MB_CHNL_SUPPORTED \
+		UINT32_C(0x10)
+	/*
+	 * If set to 1, then the 64bit flow handle is supported in addition to the
+	 * legacy 16bit flow handle. If set to 0, then the 64bit flow handle is not
+	 * supported. By default, this flag should be 0 for older version of core firmware.
+	 */
+	#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_FLOW_HANDLE_64BIT_SUPPORTED \
+		UINT32_C(0x20)
+	/*
+	 * If set to 1, then filter type can be provided in filter_alloc or filter_cfg
+	 * filter types like L2 for l2 traffic and ROCE for roce & l2 traffic.
+	 * If set to 0, then filter types not supported.
+	 * By default, this flag should be 0 for older version of core firmware.
+	 */
+	#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_L2_FILTER_TYPES_ROCE_OR_L2_SUPPORTED \
+		UINT32_C(0x40)
+	/*
+	 * If set to 1, firmware is capable to support virtio vSwitch offload model.
+	 * If set to 0, firmware can't supported virtio vSwitch offload model.
+	 * By default, this flag should be 0 for older version of core firmware.
+	 */
+	#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_VIRTIO_VSWITCH_OFFLOAD_SUPPORTED \
+		UINT32_C(0x80)
+	/*
+	 * If set to 1, firmware is capable to support trusted VF.
+	 * If set to 0, firmware is not capable to support trusted VF.
+	 * By default, this flag should be 0 for older version of core firmware.
+	 */
+	#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_TRUSTED_VF_SUPPORTED \
+		UINT32_C(0x100)
 	/*
 	 * This field represents the major version of RoCE firmware.
 	 * A change in major version represents a major release.
@@ -1154,39 +1212,45 @@ struct hwrm_ver_get_output {
 struct bd_base {
 	uint8_t	type;
 	/* This value identifies the type of buffer descriptor. */
-	#define BD_BASE_TYPE_MASK       UINT32_C(0x3f)
-	#define BD_BASE_TYPE_SFT        0
+	#define BD_BASE_TYPE_MASK             UINT32_C(0x3f)
+	#define BD_BASE_TYPE_SFT              0
 	/*
 	 * Indicates that this BD is 16B long and is used for
 	 * normal L2 packet transmission.
 	 */
-	#define BD_BASE_TYPE_TX_BD_SHORT  UINT32_C(0x0)
+	#define BD_BASE_TYPE_TX_BD_SHORT        UINT32_C(0x0)
 	/*
 	 * Indicates that this BD is 1BB long and is an empty
 	 * TX BD.  Not valid for use by the driver.
 	 */
-	#define BD_BASE_TYPE_TX_BD_EMPTY  UINT32_C(0x1)
+	#define BD_BASE_TYPE_TX_BD_EMPTY        UINT32_C(0x1)
 	/*
 	 * Indicates that this BD is 16B long and is an RX Producer
 	 * (ie. empty) buffer descriptor.
 	 */
-	#define BD_BASE_TYPE_RX_PROD_PKT  UINT32_C(0x4)
+	#define BD_BASE_TYPE_RX_PROD_PKT        UINT32_C(0x4)
 	/*
 	 * Indicates that this BD is 16B long and is an RX
 	 * Producer Buffer BD.
 	 */
-	#define BD_BASE_TYPE_RX_PROD_BFR  UINT32_C(0x5)
+	#define BD_BASE_TYPE_RX_PROD_BFR        UINT32_C(0x5)
 	/*
 	 * Indicates that this BD is 16B long and is an
 	 * RX Producer Assembly Buffer Descriptor.
 	 */
-	#define BD_BASE_TYPE_RX_PROD_AGG  UINT32_C(0x6)
+	#define BD_BASE_TYPE_RX_PROD_AGG        UINT32_C(0x6)
 	/*
 	 * Indicates that this BD is 32B long and is used for
 	 * normal L2 packet transmission.
 	 */
-	#define BD_BASE_TYPE_TX_BD_LONG   UINT32_C(0x10)
-	#define BD_BASE_TYPE_LAST        BD_BASE_TYPE_TX_BD_LONG
+	#define BD_BASE_TYPE_TX_BD_LONG         UINT32_C(0x10)
+	/*
+	 * Indicates that this BD is 32B long and is used for
+	 * L2 packet transmission for small packets that require
+	 * low latency.
+	 */
+	#define BD_BASE_TYPE_TX_BD_LONG_INLINE  UINT32_C(0x11)
+	#define BD_BASE_TYPE_LAST              BD_BASE_TYPE_TX_BD_LONG_INLINE
 	uint8_t	unused_1[7];
 } __attribute__((packed));
 
@@ -1406,6 +1470,7 @@ struct tx_bd_long {
 	uint64_t	address;
 } __attribute__((packed));
 
+/* Last 16 bytes of tx_bd_long. */
 /* tx_bd_long_hi (size:128b/16B) */
 struct tx_bd_long_hi {
 	/*
@@ -1595,6 +1660,219 @@ struct tx_bd_long_hi {
 		TX_BD_LONG_CFA_META_KEY_VLAN_TAG
 } __attribute__((packed));
 
+/*
+ * This structure is used to inform the NIC of packet data that needs to be
+ * transmitted with additional processing that requires extra data such as
+ * VLAN insertion plus attached inline data. This BD type may be used to
+ * improve latency for small packets needing the additional extended features
+ * supported by long BDs.
+ */
+/* tx_bd_long_inline (size:256b/32B) */
+struct tx_bd_long_inline {
+	uint16_t	flags_type;
+	/* This value identifies the type of buffer descriptor. */
+	#define TX_BD_LONG_INLINE_TYPE_MASK             UINT32_C(0x3f)
+	#define TX_BD_LONG_INLINE_TYPE_SFT              0
+	/*
+	 * This type of BD is 32B long and is used for inline L2 packet
+	 * transmission.
+	 */
+	#define TX_BD_LONG_INLINE_TYPE_TX_BD_LONG_INLINE  UINT32_C(0x11)
+	#define TX_BD_LONG_INLINE_TYPE_LAST \
+		TX_BD_LONG_INLINE_TYPE_TX_BD_LONG_INLINE
+	/*
+	 * All bits in this field may be set on the first BD of a packet.
+	 * Only the packet_end bit may be set in non-first BDs.
+	 */
+	#define TX_BD_LONG_INLINE_FLAGS_MASK            UINT32_C(0xffc0)
+	#define TX_BD_LONG_INLINE_FLAGS_SFT             6
+	/*
+	 * If set to 1, the packet ends with the data in the buffer
+	 * pointed to by this descriptor.  This flag must be
+	 * valid on every BD.
+	 */
+	#define TX_BD_LONG_INLINE_FLAGS_PACKET_END       UINT32_C(0x40)
+	/*
+	 * If set to 1, the device will not generate a completion for
+	 * this transmit packet unless there is an error in its processing.
+	 * If this bit is set to 0, then the packet will be completed
+	 * normally.
+	 *
+	 * This bit may be set only on the first BD of a packet.
+	 */
+	#define TX_BD_LONG_INLINE_FLAGS_NO_CMPL          UINT32_C(0x80)
+	/*
+	 * This value indicates how many 16B BD locations are consumed
+	 * in the ring by this packet, including the BD and inline
+	 * data.
+	 */
+	#define TX_BD_LONG_INLINE_FLAGS_BD_CNT_MASK      UINT32_C(0x1f00)
+	#define TX_BD_LONG_INLINE_FLAGS_BD_CNT_SFT       8
+	/* This field is deprecated. */
+	#define TX_BD_LONG_INLINE_FLAGS_LHINT_MASK       UINT32_C(0x6000)
+	#define TX_BD_LONG_INLINE_FLAGS_LHINT_SFT        13
+	/*
+	 * If set to 1, the device immediately updates the Send Consumer
+	 * Index after the buffer associated with this descriptor has
+	 * been transferred via DMA to NIC memory from host memory. An
+	 * interrupt may or may not be generated according to the state
+	 * of the interrupt avoidance mechanisms. If this bit
+	 * is set to 0, then the Consumer Index is only updated as soon
+	 * as one of the host interrupt coalescing conditions has been met.
+	 *
+	 * This bit must be valid on the first BD of a packet.
+	 */
+	#define TX_BD_LONG_INLINE_FLAGS_COAL_NOW         UINT32_C(0x8000)
+	/*
+	 * This is the length of the inline data, not including BD length, in
+	 * bytes.
+	 * The maximum value is 480.
+	 *
+	 * This field must be valid on all BDs of a packet.
+	 */
+	uint16_t	len;
+	/*
+	 * The opaque data field is passed through to the completion and can be
+	 * used for any data that the driver wants to associate with the transmit
+	 * BD.
+	 *
+	 * This field must be valid on the first BD of a packet.
+	 */
+	uint32_t	opaque;
+	uint64_t	unused1;
+	/*
+	 * All bits in this field must be valid on the first BD of a packet.
+	 * Their value on other BDs of the packet is ignored.
+	 */
+	uint16_t	lflags;
+	/*
+	 * If set to 1, the controller replaces the TCP/UPD checksum
+	 * fields of normal TCP/UPD checksum, or the inner TCP/UDP
+	 * checksum field of the encapsulated TCP/UDP packets with the
+	 * hardware calculated TCP/UDP checksum for the packet associated
+	 * with this descriptor. The flag is ignored if the LSO flag is set.
+	 */
+	#define TX_BD_LONG_INLINE_LFLAGS_TCP_UDP_CHKSUM     UINT32_C(0x1)
+	/*
+	 * If set to 1, the controller replaces the IP checksum of the
+	 * normal packets, or the inner IP checksum of the encapsulated
+	 * packets with the hardware calculated IP checksum for the
+	 * packet associated with this descriptor.
+	 */
+	#define TX_BD_LONG_INLINE_LFLAGS_IP_CHKSUM          UINT32_C(0x2)
+	/*
+	 * If set to 1, the controller will not append an Ethernet CRC
+	 * to the end of the frame.
+	 *
+	 * Packet must be 64B or longer when this flag is set. It is not
+	 * useful to use this bit with any form of TX offload such as
+	 * CSO or LSO. The intent is that the packet from the host already
+	 * has a valid Ethernet CRC on the packet.
+	 */
+	#define TX_BD_LONG_INLINE_LFLAGS_NOCRC              UINT32_C(0x4)
+	/*
+	 * If set to 1, the device will record the time at which the packet
+	 * was actually transmitted at the TX MAC.
+	 */
+	#define TX_BD_LONG_INLINE_LFLAGS_STAMP              UINT32_C(0x8)
+	/*
+	 * If set to 1, the controller replaces the tunnel IP checksum
+	 * field with hardware calculated IP checksum for the IP header
+	 * of the packet associated with this descriptor. The hardware
+	 * updates an outer UDP checksum if it is non-zero.
+	 */
+	#define TX_BD_LONG_INLINE_LFLAGS_T_IP_CHKSUM        UINT32_C(0x10)
+	/*
+	 * This bit must be 0 for BDs of this type. LSO is not supported with
+	 * inline BDs.
+	 */
+	#define TX_BD_LONG_INLINE_LFLAGS_LSO                UINT32_C(0x20)
+	/* Since LSO is not supported with inline BDs, this bit is not used. */
+	#define TX_BD_LONG_INLINE_LFLAGS_IPID_FMT           UINT32_C(0x40)
+	/* Since LSO is not supported with inline BDs, this bit is not used. */
+	#define TX_BD_LONG_INLINE_LFLAGS_T_IPID             UINT32_C(0x80)
+	/*
+	 * If set to '1', then the RoCE ICRC will be appended to the
+	 * packet.  Packet must be a valid RoCE format packet.
+	 */
+	#define TX_BD_LONG_INLINE_LFLAGS_ROCE_CRC           UINT32_C(0x100)
+	/*
+	 * If set to '1', then the FCoE CRC will be appended to the
+	 * packet.  Packet must be a valid FCoE format packet.
+	 */
+	#define TX_BD_LONG_INLINE_LFLAGS_FCOE_CRC           UINT32_C(0x200)
+	uint16_t	unused2;
+	uint32_t	unused3;
+	uint16_t	unused4;
+	/*
+	 * This value selects a CFA action to perform on the packet.
+	 * Set this value to zero if no CFA action is desired.
+	 *
+	 * This value must be valid on the first BD of a packet.
+	 */
+	uint16_t	cfa_action;
+	/*
+	 * This value is action meta-data that defines CFA edit operations
+	 * that are done in addition to any action editing.
+	 */
+	uint32_t	cfa_meta;
+	/* When key = 1, this is the VLAN tag VID value. */
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_VID_MASK     UINT32_C(0xfff)
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_VID_SFT      0
+	/* When key = 1, this is the VLAN tag DE value. */
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_DE           UINT32_C(0x1000)
+	/* When key = 1, this is the VLAN tag PRI value. */
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_PRI_MASK     UINT32_C(0xe000)
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_PRI_SFT      13
+	/* When key = 1, this is the VLAN tag TPID select value. */
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_MASK    UINT32_C(0x70000)
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_SFT     16
+	/* 0x88a8 */
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_TPID88A8 \
+		(UINT32_C(0x0) << 16)
+	/* 0x8100 */
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_TPID8100 \
+		(UINT32_C(0x1) << 16)
+	/* 0x9100 */
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_TPID9100 \
+		(UINT32_C(0x2) << 16)
+	/* 0x9200 */
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_TPID9200 \
+		(UINT32_C(0x3) << 16)
+	/* 0x9300 */
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_TPID9300 \
+		(UINT32_C(0x4) << 16)
+	/* Value programmed in CFA VLANTPID register. */
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_TPIDCFG \
+		(UINT32_C(0x5) << 16)
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_LAST \
+		TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_TPIDCFG
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_RESERVED_MASK \
+		UINT32_C(0xff80000)
+	#define TX_BD_LONG_INLINE_CFA_META_VLAN_RESERVED_SFT 19
+	/*
+	 * This field identifies the type of edit to be performed
+	 * on the packet.
+	 *
+	 * This value must be valid on the first BD of a packet.
+	 */
+	#define TX_BD_LONG_INLINE_CFA_META_KEY_MASK \
+		UINT32_C(0xf0000000)
+	#define TX_BD_LONG_INLINE_CFA_META_KEY_SFT           28
+	/* No editing */
+	#define TX_BD_LONG_INLINE_CFA_META_KEY_NONE \
+		(UINT32_C(0x0) << 28)
+	/*
+	 * - meta[17:16] - TPID select value (0 = 0x8100).
+	 * - meta[15:12] - PRI/DE value.
+	 * - meta[11:0] - VID value.
+	 */
+	#define TX_BD_LONG_INLINE_CFA_META_KEY_VLAN_TAG \
+		(UINT32_C(0x1) << 28)
+	#define TX_BD_LONG_INLINE_CFA_META_KEY_LAST \
+		TX_BD_LONG_INLINE_CFA_META_KEY_VLAN_TAG
+} __attribute__((packed));
+
 /* tx_bd_empty (size:128b/16B) */
 struct tx_bd_empty {
 	/* This value identifies the type of buffer descriptor. */
@@ -2121,6 +2399,7 @@ struct rx_pkt_cmpl {
 	uint32_t	rss_hash;
 } __attribute__((packed));
 
+/* Last 16 bytes of rx_pkt_cmpl. */
 /* rx_pkt_cmpl_hi (size:128b/16B) */
 struct rx_pkt_cmpl_hi {
 	uint32_t	flags2;
@@ -2566,6 +2845,7 @@ struct rx_tpa_start_cmpl {
 	uint32_t	rss_hash;
 } __attribute__((packed));
 
+/* Last 16 bytes of rx_tpq_start_cmpl. */
 /* rx_tpa_start_cmpl_hi (size:128b/16B) */
 struct rx_tpa_start_cmpl_hi {
 	uint32_t	flags2;
@@ -2830,6 +3110,7 @@ struct rx_tpa_end_cmpl {
 	uint32_t	tsdelta;
 } __attribute__((packed));
 
+/* Last 16 bytes of rx_tpa_end_cmpl. */
 /* rx_tpa_end_cmpl_hi (size:128b/16B) */
 struct rx_tpa_end_cmpl_hi {
 	/*
@@ -3153,6 +3434,9 @@ struct hwrm_async_event_cmpl {
 	/* Port PHY configuration change */
 	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_PHY_CFG_CHANGE \
 		UINT32_C(0x7)
+	/* Reset notification to clients */
+	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_RESET_NOTIFY \
+		UINT32_C(0x8)
 	/* Function driver unloaded */
 	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD \
 		UINT32_C(0x10)
@@ -3290,56 +3574,6 @@ struct hwrm_async_event_cmpl_link_status_change {
 		20
 } __attribute__((packed));
 
-/* hwrm_async_event_cmpl_link_mtu_change (size:128b/16B) */
-struct hwrm_async_event_cmpl_link_mtu_change {
-	uint16_t	type;
-	/*
-	 * This field indicates the exact type of the completion.
-	 * By convention, the LSB identifies the length of the
-	 * record in 16B units.  Even values indicate 16B
-	 * records.  Odd values indicate 32B
-	 * records.
-	 */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_MASK \
-		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_SFT             0
-	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_HWRM_ASYNC_EVENT \
-		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_HWRM_ASYNC_EVENT
-	/* Identifiers of events. */
-	uint16_t	event_id;
-	/* Link MTU changed */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LINK_MTU_CHANGE \
-		UINT32_C(0x1)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LINK_MTU_CHANGE
-	/* Event specific data */
-	uint32_t	event_data2;
-	uint8_t	opaque_v;
-	/*
-	 * This value is written by the NIC such that it will be different
-	 * for each pass through the completion queue.   The even passes
-	 * will write 1.  The odd passes will write 0.
-	 */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_V          UINT32_C(0x1)
-	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_OPAQUE_MASK \
-		UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_OPAQUE_SFT 1
-	/* 8-lsb timestamp from POR (100-msec resolution) */
-	uint8_t	timestamp_lo;
-	/* 16-lsb timestamp from POR (100-msec resolution) */
-	uint16_t	timestamp_hi;
-	/* Event specific data */
-	uint32_t	event_data1;
-	/* The new MTU of the link in bytes. */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_MASK \
-		UINT32_C(0xffff)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_SFT 0
-} __attribute__((packed));
-
 /* hwrm_async_event_cmpl_link_speed_change (size:128b/16B) */
 struct hwrm_async_event_cmpl_link_speed_change {
 	uint16_t	type;
@@ -3435,8 +3669,8 @@ struct hwrm_async_event_cmpl_link_speed_change {
 		16
 } __attribute__((packed));
 
-/* hwrm_async_event_cmpl_dcb_config_change (size:128b/16B) */
-struct hwrm_async_event_cmpl_dcb_config_change {
+/* hwrm_async_event_cmpl_link_speed_cfg_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_link_speed_cfg_change {
 	uint16_t	type;
 	/*
 	 * This field indicates the exact type of the completion.
@@ -3445,44 +3679,36 @@ struct hwrm_async_event_cmpl_dcb_config_change {
 	 * records.  Odd values indicate 32B
 	 * records.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_MASK \
+	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_MASK \
 		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_SFT             0
+	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_SFT \
+		0
 	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
 		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_HWRM_ASYNC_EVENT
+	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_LAST \
+		HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT
 	/* Identifiers of events. */
 	uint16_t	event_id;
-	/* DCB Configuration changed */
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_DCB_CONFIG_CHANGE \
-		UINT32_C(0x3)
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_DCB_CONFIG_CHANGE
+	/* Link speed configuration change */
+	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LINK_SPEED_CFG_CHANGE \
+		UINT32_C(0x6)
+	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LAST \
+		HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LINK_SPEED_CFG_CHANGE
 	/* Event specific data */
 	uint32_t	event_data2;
-	/* ETS configuration change */
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_ETS \
-		UINT32_C(0x1)
-	/* PFC configuration change */
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_PFC \
-		UINT32_C(0x2)
-	/* APP configuration change */
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_APP \
-		UINT32_C(0x4)
 	uint8_t	opaque_v;
 	/*
 	 * This value is written by the NIC such that it will be different
 	 * for each pass through the completion queue.   The even passes
 	 * will write 1.  The odd passes will write 0.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_V \
+	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_V \
 		UINT32_C(0x1)
 	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_OPAQUE_MASK \
+	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_MASK \
 		UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_OPAQUE_SFT 1
+	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_SFT 1
 	/* 8-lsb timestamp from POR (100-msec resolution) */
 	uint8_t	timestamp_lo;
 	/* 16-lsb timestamp from POR (100-msec resolution) */
@@ -3490,34 +3716,30 @@ struct hwrm_async_event_cmpl_dcb_config_change {
 	/* Event specific data */
 	uint32_t	event_data1;
 	/* PORT ID */
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_PORT_ID_MASK \
+	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \
 		UINT32_C(0xffff)
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_PORT_ID_SFT \
+	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \
 		0
-	/* Priority recommended for RoCE traffic */
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_MASK \
-		UINT32_C(0xff0000)
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_SFT \
-		16
-	/* none is 255 */
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_NONE \
-		(UINT32_C(0xff) << 16)
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_LAST \
-		HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_NONE
-	/* Priority recommended for L2 traffic */
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_MASK \
-		UINT32_C(0xff000000)
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_SFT \
-		24
-	/* none is 255 */
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_NONE \
-		(UINT32_C(0xff) << 24)
-	#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_LAST \
-		HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_NONE
+	/*
+	 * If set to 1, it indicates that the supported link speeds
+	 * configuration on the port has changed.
+	 * If set to 0, then there is no change in supported link speeds
+	 * configuration.
+	 */
+	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_SUPPORTED_LINK_SPEEDS_CHANGE \
+		UINT32_C(0x10000)
+	/*
+	 * If set to 1, it indicates that the link speed configuration
+	 * on the port has become illegal or invalid.
+	 * If set to 0, then the link speed configuration on the port is
+	 * legal or valid.
+	 */
+	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_ILLEGAL_LINK_SPEED_CFG \
+		UINT32_C(0x20000)
 } __attribute__((packed));
 
-/* hwrm_async_event_cmpl_port_conn_not_allowed (size:128b/16B) */
-struct hwrm_async_event_cmpl_port_conn_not_allowed {
+/* hwrm_async_event_cmpl_port_phy_cfg_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_port_phy_cfg_change {
 	uint16_t	type;
 	/*
 	 * This field indicates the exact type of the completion.
@@ -3526,22 +3748,22 @@ struct hwrm_async_event_cmpl_port_conn_not_allowed {
 	 * records.  Odd values indicate 32B
 	 * records.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_MASK \
+	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_MASK \
 		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_SFT \
+	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_SFT \
 		0
 	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT \
+	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
 		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT
+	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_LAST \
+		HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT
 	/* Identifiers of events. */
 	uint16_t	event_id;
-	/* Port connection not allowed */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_PORT_CONN_NOT_ALLOWED \
-		UINT32_C(0x4)
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_PORT_CONN_NOT_ALLOWED
+	/* Port PHY configuration change */
+	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_PORT_PHY_CFG_CHANGE \
+		UINT32_C(0x7)
+	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_LAST \
+		HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_PORT_PHY_CFG_CHANGE
 	/* Event specific data */
 	uint32_t	event_data2;
 	uint8_t	opaque_v;
@@ -3550,12 +3772,12 @@ struct hwrm_async_event_cmpl_port_conn_not_allowed {
 	 * for each pass through the completion queue.   The even passes
 	 * will write 1.  The odd passes will write 0.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_V \
+	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_V \
 		UINT32_C(0x1)
 	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_OPAQUE_MASK \
+	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_OPAQUE_MASK \
 		UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_OPAQUE_SFT 1
+	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_OPAQUE_SFT 1
 	/* 8-lsb timestamp from POR (100-msec resolution) */
 	uint8_t	timestamp_lo;
 	/* 16-lsb timestamp from POR (100-msec resolution) */
@@ -3563,90 +3785,37 @@ struct hwrm_async_event_cmpl_port_conn_not_allowed {
 	/* Event specific data */
 	uint32_t	event_data1;
 	/* PORT ID */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK \
+	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \
 		UINT32_C(0xffff)
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT \
+	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \
 		0
 	/*
-	 * This value indicates the current port level enforcement policy
-	 * for the optics module when there is an optical module mismatch
-	 * and port is not connected.
+	 * If set to 1, it indicates that the FEC
+	 * configuration on the port has changed.
+	 * If set to 0, then there is no change in FEC configuration.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_MASK \
-		UINT32_C(0xff0000)
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_SFT \
-		16
-	/* No enforcement */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_NONE \
-		(UINT32_C(0x0) << 16)
-	/* Disable Transmit side Laser. */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_DISABLETX \
-		(UINT32_C(0x1) << 16)
-	/* Raise a warning message. */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_WARNINGMSG \
-		(UINT32_C(0x2) << 16)
-	/* Power down the module. */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN \
-		(UINT32_C(0x3) << 16)
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_LAST \
-		HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN
-} __attribute__((packed));
-
-/* hwrm_async_event_cmpl_link_speed_cfg_not_allowed (size:128b/16B) */
-struct hwrm_async_event_cmpl_link_speed_cfg_not_allowed {
-	uint16_t	type;
+	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_FEC_CFG_CHANGE \
+		UINT32_C(0x10000)
 	/*
-	 * This field indicates the exact type of the completion.
-	 * By convention, the LSB identifies the length of the
-	 * record in 16B units.  Even values indicate 16B
-	 * records.  Odd values indicate 32B
-	 * records.
+	 * If set to 1, it indicates that the EEE configuration
+	 * on the port has changed.
+	 * If set to 0, then there is no change in EEE configuration
+	 * on the port.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_MASK \
-		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_SFT \
-		0
-	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT \
-		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT
-	/* Identifiers of events. */
-	uint16_t	event_id;
-	/* Link speed configuration was not allowed */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \
-		UINT32_C(0x5)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED
-	/* Event specific data */
-	uint32_t	event_data2;
-	uint8_t	opaque_v;
+	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_EEE_CFG_CHANGE \
+		UINT32_C(0x20000)
 	/*
-	 * This value is written by the NIC such that it will be different
-	 * for each pass through the completion queue.   The even passes
-	 * will write 1.  The odd passes will write 0.
+	 * If set to 1, it indicates that the pause configuration
+	 * on the PHY has changed.
+	 * If set to 0, then there is no change in the pause
+	 * configuration on the PHY.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_V \
-		UINT32_C(0x1)
-	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_MASK \
-		UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_SFT 1
-	/* 8-lsb timestamp from POR (100-msec resolution) */
-	uint8_t	timestamp_lo;
-	/* 16-lsb timestamp from POR (100-msec resolution) */
-	uint16_t	timestamp_hi;
-	/* Event specific data */
-	uint32_t	event_data1;
-	/* PORT ID */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK \
-		UINT32_C(0xffff)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT \
-		0
+	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PAUSE_CFG_CHANGE \
+		UINT32_C(0x40000)
 } __attribute__((packed));
 
-/* hwrm_async_event_cmpl_link_speed_cfg_change (size:128b/16B) */
-struct hwrm_async_event_cmpl_link_speed_cfg_change {
+/* hwrm_async_event_cmpl_pf_drvr_unload (size:128b/16B) */
+struct hwrm_async_event_cmpl_pf_drvr_unload {
 	uint16_t	type;
 	/*
 	 * This field indicates the exact type of the completion.
@@ -3655,22 +3824,21 @@ struct hwrm_async_event_cmpl_link_speed_cfg_change {
 	 * records.  Odd values indicate 32B
 	 * records.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_MASK \
+	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_MASK \
 		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_SFT \
-		0
+	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_SFT             0
 	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT \
 		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT
+	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_LAST \
+		HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT
 	/* Identifiers of events. */
 	uint16_t	event_id;
-	/* Link speed configuration change */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LINK_SPEED_CFG_CHANGE \
-		UINT32_C(0x6)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LINK_SPEED_CFG_CHANGE
+	/* PF driver unloaded */
+	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD \
+		UINT32_C(0x20)
+	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_LAST \
+		HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD
 	/* Event specific data */
 	uint32_t	event_data2;
 	uint8_t	opaque_v;
@@ -3679,43 +3847,28 @@ struct hwrm_async_event_cmpl_link_speed_cfg_change {
 	 * for each pass through the completion queue.   The even passes
 	 * will write 1.  The odd passes will write 0.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_V \
-		UINT32_C(0x1)
+	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_V          UINT32_C(0x1)
 	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_MASK \
-		UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_SFT 1
+	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_MASK UINT32_C(0xfe)
+	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_SFT 1
 	/* 8-lsb timestamp from POR (100-msec resolution) */
 	uint8_t	timestamp_lo;
 	/* 16-lsb timestamp from POR (100-msec resolution) */
 	uint16_t	timestamp_hi;
 	/* Event specific data */
 	uint32_t	event_data1;
-	/* PORT ID */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \
+	/* PF ID */
+	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK \
 		UINT32_C(0xffff)
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \
-		0
-	/*
-	 * If set to 1, it indicates that the supported link speeds
-	 * configuration on the port has changed.
-	 * If set to 0, then there is no change in supported link speeds
-	 * configuration.
-	 */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_SUPPORTED_LINK_SPEEDS_CHANGE \
-		UINT32_C(0x10000)
-	/*
-	 * If set to 1, it indicates that the link speed configuration
-	 * on the port has become illegal or invalid.
-	 * If set to 0, then the link speed configuration on the port is
-	 * legal or valid.
-	 */
-	#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_ILLEGAL_LINK_SPEED_CFG \
-		UINT32_C(0x20000)
+	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT 0
+	/* Indicates the physical port this pf belongs to */
+	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_MASK \
+		UINT32_C(0x70000)
+	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_SFT    16
 } __attribute__((packed));
 
-/* hwrm_async_event_cmpl_port_phy_cfg_change (size:128b/16B) */
-struct hwrm_async_event_cmpl_port_phy_cfg_change {
+/* hwrm_async_event_cmpl_vf_cfg_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_vf_cfg_change {
 	uint16_t	type;
 	/*
 	 * This field indicates the exact type of the completion.
@@ -3724,22 +3877,21 @@ struct hwrm_async_event_cmpl_port_phy_cfg_change {
 	 * records.  Odd values indicate 32B
 	 * records.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_MASK \
+	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_MASK \
 		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_SFT \
-		0
+	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_SFT             0
 	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
 		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT
+	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_LAST \
+		HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT
 	/* Identifiers of events. */
 	uint16_t	event_id;
-	/* Port PHY configuration change */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_PORT_PHY_CFG_CHANGE \
-		UINT32_C(0x7)
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_PORT_PHY_CFG_CHANGE
+	/* VF Configuration Change */
+	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE \
+		UINT32_C(0x33)
+	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_LAST \
+		HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE
 	/* Event specific data */
 	uint32_t	event_data2;
 	uint8_t	opaque_v;
@@ -3748,101 +3900,60 @@ struct hwrm_async_event_cmpl_port_phy_cfg_change {
 	 * for each pass through the completion queue.   The even passes
 	 * will write 1.  The odd passes will write 0.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_V \
-		UINT32_C(0x1)
+	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_V          UINT32_C(0x1)
 	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_OPAQUE_MASK \
-		UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_OPAQUE_SFT 1
+	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe)
+	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_SFT 1
 	/* 8-lsb timestamp from POR (100-msec resolution) */
 	uint8_t	timestamp_lo;
 	/* 16-lsb timestamp from POR (100-msec resolution) */
 	uint16_t	timestamp_hi;
-	/* Event specific data */
+	/*
+	 * Each flag provided in this field indicates a specific VF
+	 * configuration change. At least one of these flags shall be set to 1
+	 * when an asynchronous event completion of this type is provided
+	 * by the HWRM.
+	 */
 	uint32_t	event_data1;
-	/* PORT ID */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \
-		UINT32_C(0xffff)
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \
-		0
 	/*
-	 * If set to 1, it indicates that the FEC
-	 * configuration on the port has changed.
-	 * If set to 0, then there is no change in FEC configuration.
+	 * If this bit is set to 1, then the value of MTU
+	 * was changed on this VF.
+	 * If set to 0, then this bit should be ignored.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_FEC_CFG_CHANGE \
-		UINT32_C(0x10000)
+	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MTU_CHANGE \
+		UINT32_C(0x1)
 	/*
-	 * If set to 1, it indicates that the EEE configuration
-	 * on the port has changed.
-	 * If set to 0, then there is no change in EEE configuration
-	 * on the port.
+	 * If this bit is set to 1, then the value of MRU
+	 * was changed on this VF.
+	 * If set to 0, then this bit should be ignored.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_EEE_CFG_CHANGE \
-		UINT32_C(0x20000)
+	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MRU_CHANGE \
+		UINT32_C(0x2)
 	/*
-	 * If set to 1, it indicates that the pause configuration
-	 * on the PHY has changed.
-	 * If set to 0, then there is no change in the pause
-	 * configuration on the PHY.
+	 * If this bit is set to 1, then the value of default MAC
+	 * address was changed on this VF.
+	 * If set to 0, then this bit should be ignored.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PAUSE_CFG_CHANGE \
-		UINT32_C(0x40000)
-} __attribute__((packed));
-
-/* hwrm_async_event_cmpl_func_drvr_unload (size:128b/16B) */
-struct hwrm_async_event_cmpl_func_drvr_unload {
-	uint16_t	type;
+	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_MAC_ADDR_CHANGE \
+		UINT32_C(0x4)
 	/*
-	 * This field indicates the exact type of the completion.
-	 * By convention, the LSB identifies the length of the
-	 * record in 16B units.  Even values indicate 16B
-	 * records.  Odd values indicate 32B
-	 * records.
+	 * If this bit is set to 1, then the value of default VLAN
+	 * was changed on this VF.
+	 * If set to 0, then this bit should be ignored.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_MASK \
-		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_SFT             0
-	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT \
-		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT
-	/* Identifiers of events. */
-	uint16_t	event_id;
-	/* Function driver unloaded */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_FUNC_DRVR_UNLOAD \
-		UINT32_C(0x10)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_FUNC_DRVR_UNLOAD
-	/* Event specific data */
-	uint32_t	event_data2;
-	uint8_t	opaque_v;
+	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_VLAN_CHANGE \
+		UINT32_C(0x8)
 	/*
-	 * This value is written by the NIC such that it will be different
-	 * for each pass through the completion queue.   The even passes
-	 * will write 1.  The odd passes will write 0.
+	 * If this bit is set to 1, then the value of trusted VF enable
+	 * was changed on this VF.
+	 * If set to 0, then this bit should be ignored.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_V          UINT32_C(0x1)
-	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_OPAQUE_MASK \
-		UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_OPAQUE_SFT 1
-	/* 8-lsb timestamp from POR (100-msec resolution) */
-	uint8_t	timestamp_lo;
-	/* 16-lsb timestamp from POR (100-msec resolution) */
-	uint16_t	timestamp_hi;
-	/* Event specific data */
-	uint32_t	event_data1;
-	/* Function ID */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK \
-		UINT32_C(0xffff)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT \
-		0
+	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_TRUSTED_VF_CFG_CHANGE \
+		UINT32_C(0x10)
 } __attribute__((packed));
 
-/* hwrm_async_event_cmpl_func_drvr_load (size:128b/16B) */
-struct hwrm_async_event_cmpl_func_drvr_load {
+/* hwrm_async_event_cmpl_hwrm_error (size:128b/16B) */
+struct hwrm_async_event_cmpl_hwrm_error {
 	uint16_t	type;
 	/*
 	 * This field indicates the exact type of the completion.
@@ -3851,673 +3962,317 @@ struct hwrm_async_event_cmpl_func_drvr_load {
 	 * records.  Odd values indicate 32B
 	 * records.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_MASK \
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \
 		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_SFT             0
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_SFT             0
 	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT \
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT \
 		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_LAST \
+		HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT
 	/* Identifiers of events. */
 	uint16_t	event_id;
-	/* Function driver loaded */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_FUNC_DRVR_LOAD \
-		UINT32_C(0x11)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_FUNC_DRVR_LOAD
+	/* HWRM Error */
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR \
+		UINT32_C(0xff)
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_LAST \
+		HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR
 	/* Event specific data */
 	uint32_t	event_data2;
+	/* Severity of HWRM Error */
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_MASK \
+		UINT32_C(0xff)
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_SFT     0
+	/* Warning */
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_WARNING \
+		UINT32_C(0x0)
+	/* Non-fatal Error */
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_NONFATAL \
+		UINT32_C(0x1)
+	/* Fatal Error */
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL \
+		UINT32_C(0x2)
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_LAST \
+		HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL
 	uint8_t	opaque_v;
 	/*
 	 * This value is written by the NIC such that it will be different
 	 * for each pass through the completion queue.   The even passes
 	 * will write 1.  The odd passes will write 0.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_V          UINT32_C(0x1)
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V          UINT32_C(0x1)
 	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_OPAQUE_MASK UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_OPAQUE_SFT 1
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_MASK UINT32_C(0xfe)
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_SFT 1
 	/* 8-lsb timestamp from POR (100-msec resolution) */
 	uint8_t	timestamp_lo;
 	/* 16-lsb timestamp from POR (100-msec resolution) */
 	uint16_t	timestamp_hi;
 	/* Event specific data */
 	uint32_t	event_data1;
-	/* Function ID */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK \
-		UINT32_C(0xffff)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0
+	/* Time stamp for error event */
+	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP \
+		UINT32_C(0x1)
 } __attribute__((packed));
 
-/* hwrm_async_event_cmpl_func_flr_proc_cmplt (size:128b/16B) */
-struct hwrm_async_event_cmpl_func_flr_proc_cmplt {
-	uint16_t	type;
-	/*
-	 * This field indicates the exact type of the completion.
-	 * By convention, the LSB identifies the length of the
-	 * record in 16B units.  Even values indicate 16B
-	 * records.  Odd values indicate 32B
-	 * records.
-	 */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_MASK \
-		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_SFT \
-		0
-	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_HWRM_ASYNC_EVENT \
-		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_HWRM_ASYNC_EVENT
-	/* Identifiers of events. */
-	uint16_t	event_id;
-	/* Function FLR related processing has completed */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_FUNC_FLR_PROC_CMPLT \
-		UINT32_C(0x12)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_FUNC_FLR_PROC_CMPLT
-	/* Event specific data */
-	uint32_t	event_data2;
-	uint8_t	opaque_v;
+/*******************
+ * hwrm_func_reset *
+ *******************/
+
+
+/* hwrm_func_reset_input (size:192b/24B) */
+struct hwrm_func_reset_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
 	/*
-	 * This value is written by the NIC such that it will be different
-	 * for each pass through the completion queue.   The even passes
-	 * will write 1.  The odd passes will write 0.
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_V \
-		UINT32_C(0x1)
-	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_OPAQUE_MASK \
-		UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_OPAQUE_SFT 1
-	/* 8-lsb timestamp from POR (100-msec resolution) */
-	uint8_t	timestamp_lo;
-	/* 16-lsb timestamp from POR (100-msec resolution) */
-	uint16_t	timestamp_hi;
-	/* Event specific data */
-	uint32_t	event_data1;
-	/* Function ID */
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_MASK \
-		UINT32_C(0xffff)
-	#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_SFT \
-		0
-} __attribute__((packed));
-
-/* hwrm_async_event_cmpl_pf_drvr_unload (size:128b/16B) */
-struct hwrm_async_event_cmpl_pf_drvr_unload {
-	uint16_t	type;
+	uint16_t	cmpl_ring;
 	/*
-	 * This field indicates the exact type of the completion.
-	 * By convention, the LSB identifies the length of the
-	 * record in 16B units.  Even values indicate 16B
-	 * records.  Odd values indicate 32B
-	 * records.
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_MASK \
-		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_SFT             0
-	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT \
-		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT
-	/* Identifiers of events. */
-	uint16_t	event_id;
-	/* PF driver unloaded */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD \
-		UINT32_C(0x20)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD
-	/* Event specific data */
-	uint32_t	event_data2;
-	uint8_t	opaque_v;
+	uint16_t	seq_id;
 	/*
-	 * This value is written by the NIC such that it will be different
-	 * for each pass through the completion queue.   The even passes
-	 * will write 1.  The odd passes will write 0.
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_V          UINT32_C(0x1)
-	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_MASK UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_SFT 1
-	/* 8-lsb timestamp from POR (100-msec resolution) */
-	uint8_t	timestamp_lo;
-	/* 16-lsb timestamp from POR (100-msec resolution) */
-	uint16_t	timestamp_hi;
-	/* Event specific data */
-	uint32_t	event_data1;
-	/* PF ID */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK \
-		UINT32_C(0xffff)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT 0
-	/* Indicates the physical port this pf belongs to */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_MASK \
-		UINT32_C(0x70000)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_SFT    16
-} __attribute__((packed));
-
-/* hwrm_async_event_cmpl_pf_drvr_load (size:128b/16B) */
-struct hwrm_async_event_cmpl_pf_drvr_load {
-	uint16_t	type;
+	uint16_t	target_id;
 	/*
-	 * This field indicates the exact type of the completion.
-	 * By convention, the LSB identifies the length of the
-	 * record in 16B units.  Even values indicate 16B
-	 * records.  Odd values indicate 32B
-	 * records.
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_MASK \
-		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_SFT             0
-	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT \
-		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT
-	/* Identifiers of events. */
-	uint16_t	event_id;
-	/* PF driver loaded */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_PF_DRVR_LOAD \
-		UINT32_C(0x21)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_PF_DRVR_LOAD
-	/* Event specific data */
-	uint32_t	event_data2;
-	uint8_t	opaque_v;
+	uint64_t	resp_addr;
+	uint32_t	enables;
 	/*
-	 * This value is written by the NIC such that it will be different
-	 * for each pass through the completion queue.   The even passes
-	 * will write 1.  The odd passes will write 0.
+	 * This bit must be '1' for the vf_id_valid field to be
+	 * configured.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_V          UINT32_C(0x1)
-	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_OPAQUE_MASK UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_OPAQUE_SFT 1
-	/* 8-lsb timestamp from POR (100-msec resolution) */
-	uint8_t	timestamp_lo;
-	/* 16-lsb timestamp from POR (100-msec resolution) */
-	uint16_t	timestamp_hi;
-	/* Event specific data */
-	uint32_t	event_data1;
-	/* PF ID */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK \
-		UINT32_C(0xffff)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0
-	/* Indicates the physical port this pf belongs to */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_MASK \
-		UINT32_C(0x70000)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_SFT    16
-} __attribute__((packed));
-
-/* hwrm_async_event_cmpl_vf_flr (size:128b/16B) */
-struct hwrm_async_event_cmpl_vf_flr {
-	uint16_t	type;
+	#define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID     UINT32_C(0x1)
 	/*
-	 * This field indicates the exact type of the completion.
-	 * By convention, the LSB identifies the length of the
-	 * record in 16B units.  Even values indicate 16B
-	 * records.  Odd values indicate 32B
-	 * records.
+	 * The ID of the VF that this PF is trying to reset.
+	 * Only the parent PF shall be allowed to reset a child VF.
+	 *
+	 * A parent PF driver shall use this field only when a specific child VF
+	 * is requested to be reset.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_MASK \
-		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_SFT             0
-	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_HWRM_ASYNC_EVENT \
-		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_HWRM_ASYNC_EVENT
-	/* Identifiers of events. */
-	uint16_t	event_id;
-	/* VF Function Level Reset (FLR) */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_VF_FLR UINT32_C(0x30)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_VF_FLR
-	/* Event specific data */
-	uint32_t	event_data2;
-	uint8_t	opaque_v;
+	uint16_t	vf_id;
+	/* This value indicates the level of a function reset. */
+	uint8_t	func_reset_level;
 	/*
-	 * This value is written by the NIC such that it will be different
-	 * for each pass through the completion queue.   The even passes
-	 * will write 1.  The odd passes will write 0.
+	 * Reset the caller function and its children VFs (if any). If no
+	 * children functions exist, then reset the caller function only.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_V          UINT32_C(0x1)
-	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_OPAQUE_MASK UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_OPAQUE_SFT 1
-	/* 8-lsb timestamp from POR (100-msec resolution) */
-	uint8_t	timestamp_lo;
-	/* 16-lsb timestamp from POR (100-msec resolution) */
-	uint16_t	timestamp_hi;
-	/* Event specific data */
-	uint32_t	event_data1;
-	/* VF ID */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_MASK \
-		UINT32_C(0xffff)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_SFT 0
-	/* Indicates the physical function this event occured on. */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_MASK \
-		UINT32_C(0xff0000)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_SFT 16
-} __attribute__((packed));
-
-/* hwrm_async_event_cmpl_vf_mac_addr_change (size:128b/16B) */
-struct hwrm_async_event_cmpl_vf_mac_addr_change {
-	uint16_t	type;
+	#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL \
+		UINT32_C(0x0)
+	/* Reset the caller function only */
+	#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME \
+		UINT32_C(0x1)
 	/*
-	 * This field indicates the exact type of the completion.
-	 * By convention, the LSB identifies the length of the
-	 * record in 16B units.  Even values indicate 16B
-	 * records.  Odd values indicate 32B
-	 * records.
+	 * Reset all children VFs of the caller function driver if the
+	 * caller is a PF driver.
+	 * It is an error to specify this level by a VF driver.
+	 * It is an error to specify this level by a PF driver with
+	 * no children VFs.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_MASK \
-		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_SFT             0
-	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_HWRM_ASYNC_EVENT \
-		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_HWRM_ASYNC_EVENT
-	/* Identifiers of events. */
-	uint16_t	event_id;
-	/* VF MAC Address Change */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_VF_MAC_ADDR_CHANGE \
-		UINT32_C(0x31)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_VF_MAC_ADDR_CHANGE
-	/* Event specific data */
-	uint32_t	event_data2;
-	uint8_t	opaque_v;
+	#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \
+		UINT32_C(0x2)
 	/*
-	 * This value is written by the NIC such that it will be different
-	 * for each pass through the completion queue.   The even passes
-	 * will write 1.  The odd passes will write 0.
+	 * Reset a specific VF of the caller function driver if the caller
+	 * is the parent PF driver.
+	 * It is an error to specify this level by a VF driver.
+	 * It is an error to specify this level by a PF driver that is not
+	 * the parent of the VF that is being requested to reset.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_V \
-		UINT32_C(0x1)
-	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_OPAQUE_MASK \
-		UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_OPAQUE_SFT 1
-	/* 8-lsb timestamp from POR (100-msec resolution) */
-	uint8_t	timestamp_lo;
-	/* 16-lsb timestamp from POR (100-msec resolution) */
-	uint16_t	timestamp_hi;
-	/* Event specific data */
-	uint32_t	event_data1;
-	/* VF ID */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_MASK \
-		UINT32_C(0xffff)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_SFT \
-		0
+	#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF \
+		UINT32_C(0x3)
+	#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_LAST \
+		HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF
+	uint8_t	unused_0;
 } __attribute__((packed));
 
-/* hwrm_async_event_cmpl_pf_vf_comm_status_change (size:128b/16B) */
-struct hwrm_async_event_cmpl_pf_vf_comm_status_change {
-	uint16_t	type;
+/* hwrm_func_reset_output (size:128b/16B) */
+struct hwrm_func_reset_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	uint8_t	unused_0[7];
 	/*
-	 * This field indicates the exact type of the completion.
-	 * By convention, the LSB identifies the length of the
-	 * record in 16B units.  Even values indicate 16B
-	 * records.  Odd values indicate 32B
-	 * records.
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_MASK \
-		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_SFT \
-		0
-	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT \
-		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT
-	/* Identifiers of events. */
-	uint16_t	event_id;
-	/* PF-VF communication channel status change. */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \
-		UINT32_C(0x32)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_PF_VF_COMM_STATUS_CHANGE
-	/* Event specific data */
-	uint32_t	event_data2;
-	uint8_t	opaque_v;
-	/*
-	 * This value is written by the NIC such that it will be different
-	 * for each pass through the completion queue.   The even passes
-	 * will write 1.  The odd passes will write 0.
-	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_V \
-		UINT32_C(0x1)
-	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_MASK \
-		UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_SFT 1
-	/* 8-lsb timestamp from POR (100-msec resolution) */
-	uint8_t	timestamp_lo;
-	/* 16-lsb timestamp from POR (100-msec resolution) */
-	uint16_t	timestamp_hi;
-	/* Event specific data */
-	uint32_t	event_data1;
-	/*
-	 * If this bit is set to 1, then it indicates that the PF-VF
-	 * communication was lost and it is established.
-	 * If this bit set to 0, then it indicates that the PF-VF
-	 * communication was established and it is lost.
-	 */
-	#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_DATA1_COMM_ESTABLISHED \
-		UINT32_C(0x1)
+	uint8_t	valid;
 } __attribute__((packed));
 
-/* hwrm_async_event_cmpl_vf_cfg_change (size:128b/16B) */
-struct hwrm_async_event_cmpl_vf_cfg_change {
-	uint16_t	type;
-	/*
-	 * This field indicates the exact type of the completion.
-	 * By convention, the LSB identifies the length of the
-	 * record in 16B units.  Even values indicate 16B
-	 * records.  Odd values indicate 32B
-	 * records.
-	 */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_MASK \
-		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_SFT             0
-	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
-		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT
-	/* Identifiers of events. */
-	uint16_t	event_id;
-	/* VF Configuration Change */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE \
-		UINT32_C(0x33)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE
-	/* Event specific data */
-	uint32_t	event_data2;
-	uint8_t	opaque_v;
+/********************
+ * hwrm_func_getfid *
+ ********************/
+
+
+/* hwrm_func_getfid_input (size:192b/24B) */
+struct hwrm_func_getfid_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
 	/*
-	 * This value is written by the NIC such that it will be different
-	 * for each pass through the completion queue.   The even passes
-	 * will write 1.  The odd passes will write 0.
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_V          UINT32_C(0x1)
-	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_SFT 1
-	/* 8-lsb timestamp from POR (100-msec resolution) */
-	uint8_t	timestamp_lo;
-	/* 16-lsb timestamp from POR (100-msec resolution) */
-	uint16_t	timestamp_hi;
+	uint16_t	cmpl_ring;
 	/*
-	 * Each flag provided in this field indicates a specific VF
-	 * configuration change. At least one of these flags shall be set to 1
-	 * when an asynchronous event completion of this type is provided
-	 * by the HWRM.
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	uint32_t	event_data1;
+	uint16_t	seq_id;
 	/*
-	 * If this bit is set to 1, then the value of MTU
-	 * was changed on this VF.
-	 * If set to 0, then this bit should be ignored.
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MTU_CHANGE \
-		UINT32_C(0x1)
+	uint16_t	target_id;
 	/*
-	 * If this bit is set to 1, then the value of MRU
-	 * was changed on this VF.
-	 * If set to 0, then this bit should be ignored.
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MRU_CHANGE \
-		UINT32_C(0x2)
+	uint64_t	resp_addr;
+	uint32_t	enables;
 	/*
-	 * If this bit is set to 1, then the value of default MAC
-	 * address was changed on this VF.
-	 * If set to 0, then this bit should be ignored.
+	 * This bit must be '1' for the pci_id field to be
+	 * configured.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_MAC_ADDR_CHANGE \
-		UINT32_C(0x4)
+	#define HWRM_FUNC_GETFID_INPUT_ENABLES_PCI_ID     UINT32_C(0x1)
 	/*
-	 * If this bit is set to 1, then the value of default VLAN
-	 * was changed on this VF.
-	 * If set to 0, then this bit should be ignored.
+	 * This value is the PCI ID of the queried function.
+	 * If ARI is enabled, then it is
+	 * Bus Number (8b):Function Number(8b). Otherwise, it is
+	 * Bus Number (8b):Device Number (5b):Function Number(3b).
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_VLAN_CHANGE \
-		UINT32_C(0x8)
+	uint16_t	pci_id;
+	uint8_t	unused_0[2];
 } __attribute__((packed));
 
-/* hwrm_async_event_cmpl_llfc_pfc_change (size:128b/16B) */
-struct hwrm_async_event_cmpl_llfc_pfc_change {
-	uint16_t	type;
+/* hwrm_func_getfid_output (size:128b/16B) */
+struct hwrm_func_getfid_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
 	/*
-	 * This field indicates the exact type of the completion.
-	 * By convention, the LSB identifies the length of the
-	 * record in 16B units.  Even values indicate 16B
-	 * records.  Odd values indicate 32B
-	 * records.
+	 * FID value.  This value is used to identify operations on the PCI
+	 * bus as belonging to a particular PCI function.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_MASK \
-		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_SFT             0
-	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_HWRM_ASYNC_EVENT \
-		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_HWRM_ASYNC_EVENT
-	/* unused1 is 10 b */
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_UNUSED1_MASK \
-		UINT32_C(0xffc0)
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_UNUSED1_SFT          6
-	/* Identifiers of events. */
-	uint16_t	event_id;
-	/* LLFC/PFC Configuration Change */
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LLFC_PFC_CHANGE \
-		UINT32_C(0x34)
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LLFC_PFC_CHANGE
-	/* Event specific data */
-	uint32_t	event_data2;
-	uint8_t	opaque_v;
+	uint16_t	fid;
+	uint8_t	unused_0[5];
 	/*
-	 * This value is written by the NIC such that it will be different
-	 * for each pass through the completion queue.   The even passes
-	 * will write 1.  The odd passes will write 0.
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_V          UINT32_C(0x1)
-	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_OPAQUE_MASK \
-		UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_OPAQUE_SFT 1
-	/* 8-lsb timestamp from POR (100-msec resolution) */
-	uint8_t	timestamp_lo;
-	/* 16-lsb timestamp from POR (100-msec resolution) */
-	uint16_t	timestamp_hi;
-	/* Event specific data */
-	uint32_t	event_data1;
-	/* Indicates llfc pfc status change */
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_MASK \
-		UINT32_C(0x3)
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_SFT \
-		0
+	uint8_t	valid;
+} __attribute__((packed));
+
+/**********************
+ * hwrm_func_vf_alloc *
+ **********************/
+
+
+/* hwrm_func_vf_alloc_input (size:192b/24B) */
+struct hwrm_func_vf_alloc_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
 	/*
-	 * If this field set to 1, then it indicates that llfc is
-	 * enabled.
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_LLFC \
-		UINT32_C(0x1)
+	uint16_t	cmpl_ring;
 	/*
-	 * If this field is set to 2, then it indicates that pfc
-	 * is enabled.
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_PFC \
-		UINT32_C(0x2)
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_LAST \
-		HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_PFC
-	/* Indicates the physical port this llfc pfc change occur */
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_MASK \
-		UINT32_C(0x1c)
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_SFT \
-		2
-	/* PORT ID */
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_ID_MASK \
-		UINT32_C(0x1fffe0)
-	#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_ID_SFT \
-		5
-} __attribute__((packed));
-
-/* hwrm_async_event_cmpl_default_vnic_change (size:128b/16B) */
-struct hwrm_async_event_cmpl_default_vnic_change {
-	uint16_t	type;
+	uint16_t	seq_id;
 	/*
-	 * This field indicates the exact type of the completion.
-	 * By convention, the LSB identifies the length of the
-	 * record in 16B units.  Even values indicate 16B
-	 * records.  Odd values indicate 32B
-	 * records.
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_MASK \
-		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_SFT \
-		0
-	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_HWRM_ASYNC_EVENT \
-		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_HWRM_ASYNC_EVENT
-	/* unused1 is 10 b */
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_UNUSED1_MASK \
-		UINT32_C(0xffc0)
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_UNUSED1_SFT \
-		6
-	/* Identifiers of events. */
-	uint16_t	event_id;
-	/* Notification of a default vnic allocaiton or free */
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION \
-		UINT32_C(0x35)
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION
-	/* Event specific data */
-	uint32_t	event_data2;
-	uint8_t	opaque_v;
+	uint16_t	target_id;
 	/*
-	 * This value is written by the NIC such that it will be different
-	 * for each pass through the completion queue.   The even passes
-	 * will write 1.  The odd passes will write 0.
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_V \
-		UINT32_C(0x1)
-	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_OPAQUE_MASK \
-		UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_OPAQUE_SFT 1
-	/* 8-lsb timestamp from POR (100-msec resolution) */
-	uint8_t	timestamp_lo;
-	/* 16-lsb timestamp from POR (100-msec resolution) */
-	uint16_t	timestamp_hi;
-	/* Event specific data */
-	uint32_t	event_data1;
-	/* Indicates default vnic configuration change */
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_MASK \
-		UINT32_C(0x3)
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_SFT \
-		0
+	uint64_t	resp_addr;
+	uint32_t	enables;
 	/*
-	 * If this field is set to 1, then it indicates that
-	 * a default VNIC has been allocate.
+	 * This bit must be '1' for the first_vf_id field to be
+	 * configured.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_ALLOC \
-		UINT32_C(0x1)
+	#define HWRM_FUNC_VF_ALLOC_INPUT_ENABLES_FIRST_VF_ID     UINT32_C(0x1)
 	/*
-	 * If this field is set to 2, then it indicates that
-	 * a default VNIC has been freed.
+	 * This value is used to identify a Virtual Function (VF).
+	 * The scope of VF ID is local within a PF.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_FREE \
-		UINT32_C(0x2)
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_FREE
-	/* Indicates the physical function this event occured on. */
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_PF_ID_MASK \
-		UINT32_C(0x3fc)
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_PF_ID_SFT \
-		2
-	/* Indicates the virtual function this event occured on */
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_MASK \
-		UINT32_C(0x3fffc00)
-	#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_SFT \
-		10
+	uint16_t	first_vf_id;
+	/* The number of virtual functions requested. */
+	uint16_t	num_vfs;
 } __attribute__((packed));
 
-/* hwrm_async_event_cmpl_hwrm_error (size:128b/16B) */
-struct hwrm_async_event_cmpl_hwrm_error {
-	uint16_t	type;
-	/*
-	 * This field indicates the exact type of the completion.
-	 * By convention, the LSB identifies the length of the
-	 * record in 16B units.  Even values indicate 16B
-	 * records.  Odd values indicate 32B
-	 * records.
-	 */
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \
-		UINT32_C(0x3f)
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_SFT             0
-	/* HWRM Asynchronous Event Information */
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT \
-		UINT32_C(0x2e)
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_LAST \
-		HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT
-	/* Identifiers of events. */
-	uint16_t	event_id;
-	/* HWRM Error */
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR \
-		UINT32_C(0xff)
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_LAST \
-		HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR
-	/* Event specific data */
-	uint32_t	event_data2;
-	/* Severity of HWRM Error */
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_MASK \
-		UINT32_C(0xff)
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_SFT     0
-	/* Warning */
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_WARNING \
-		UINT32_C(0x0)
-	/* Non-fatal Error */
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_NONFATAL \
-		UINT32_C(0x1)
-	/* Fatal Error */
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL \
-		UINT32_C(0x2)
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_LAST \
-		HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL
-	uint8_t	opaque_v;
+/* hwrm_func_vf_alloc_output (size:128b/16B) */
+struct hwrm_func_vf_alloc_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	/* The ID of the first VF allocated. */
+	uint16_t	first_vf_id;
+	uint8_t	unused_0[5];
 	/*
-	 * This value is written by the NIC such that it will be different
-	 * for each pass through the completion queue.   The even passes
-	 * will write 1.  The odd passes will write 0.
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
 	 */
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V          UINT32_C(0x1)
-	/* opaque is 7 b */
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_MASK UINT32_C(0xfe)
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_SFT 1
-	/* 8-lsb timestamp from POR (100-msec resolution) */
-	uint8_t	timestamp_lo;
-	/* 16-lsb timestamp from POR (100-msec resolution) */
-	uint16_t	timestamp_hi;
-	/* Event specific data */
-	uint32_t	event_data1;
-	/* Time stamp for error event */
-	#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP \
-		UINT32_C(0x1)
+	uint8_t	valid;
 } __attribute__((packed));
 
-/*******************
- * hwrm_func_reset *
- *******************/
+/*********************
+ * hwrm_func_vf_free *
+ *********************/
 
 
-/* hwrm_func_reset_input (size:192b/24B) */
-struct hwrm_func_reset_input {
+/* hwrm_func_vf_free_input (size:192b/24B) */
+struct hwrm_func_vf_free_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -4547,54 +4302,24 @@ struct hwrm_func_reset_input {
 	uint64_t	resp_addr;
 	uint32_t	enables;
 	/*
-	 * This bit must be '1' for the vf_id_valid field to be
+	 * This bit must be '1' for the first_vf_id field to be
 	 * configured.
 	 */
-	#define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID     UINT32_C(0x1)
-	/*
-	 * The ID of the VF that this PF is trying to reset.
-	 * Only the parent PF shall be allowed to reset a child VF.
-	 *
-	 * A parent PF driver shall use this field only when a specific child VF
-	 * is requested to be reset.
-	 */
-	uint16_t	vf_id;
-	/* This value indicates the level of a function reset. */
-	uint8_t	func_reset_level;
-	/*
-	 * Reset the caller function and its children VFs (if any). If no
-	 * children functions exist, then reset the caller function only.
-	 */
-	#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL \
-		UINT32_C(0x0)
-	/* Reset the caller function only */
-	#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME \
-		UINT32_C(0x1)
+	#define HWRM_FUNC_VF_FREE_INPUT_ENABLES_FIRST_VF_ID     UINT32_C(0x1)
 	/*
-	 * Reset all children VFs of the caller function driver if the
-	 * caller is a PF driver.
-	 * It is an error to specify this level by a VF driver.
-	 * It is an error to specify this level by a PF driver with
-	 * no children VFs.
+	 * This value is used to identify a Virtual Function (VF).
+	 * The scope of VF ID is local within a PF.
 	 */
-	#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \
-		UINT32_C(0x2)
+	uint16_t	first_vf_id;
 	/*
-	 * Reset a specific VF of the caller function driver if the caller
-	 * is the parent PF driver.
-	 * It is an error to specify this level by a VF driver.
-	 * It is an error to specify this level by a PF driver that is not
-	 * the parent of the VF that is being requested to reset.
+	 * The number of virtual functions requested.
+	 * 0xFFFF - Cleanup all children of this PF.
 	 */
-	#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF \
-		UINT32_C(0x3)
-	#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_LAST \
-		HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF
-	uint8_t	unused_0;
+	uint16_t	num_vfs;
 } __attribute__((packed));
 
-/* hwrm_func_reset_output (size:128b/16B) */
-struct hwrm_func_reset_output {
+/* hwrm_func_vf_free_output (size:128b/16B) */
+struct hwrm_func_vf_free_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -4615,12 +4340,12 @@ struct hwrm_func_reset_output {
 } __attribute__((packed));
 
 /********************
- * hwrm_func_getfid *
+ * hwrm_func_vf_cfg *
  ********************/
 
 
-/* hwrm_func_getfid_input (size:192b/24B) */
-struct hwrm_func_getfid_input {
+/* hwrm_func_vf_cfg_input (size:448b/56B) */
+struct hwrm_func_vf_cfg_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -4650,283 +4375,62 @@ struct hwrm_func_getfid_input {
 	uint64_t	resp_addr;
 	uint32_t	enables;
 	/*
-	 * This bit must be '1' for the pci_id field to be
+	 * This bit must be '1' for the mtu field to be
 	 * configured.
 	 */
-	#define HWRM_FUNC_GETFID_INPUT_ENABLES_PCI_ID     UINT32_C(0x1)
+	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU \
+		UINT32_C(0x1)
 	/*
-	 * This value is the PCI ID of the queried function.
-	 * If ARI is enabled, then it is
-	 * Bus Number (8b):Function Number(8b). Otherwise, it is
-	 * Bus Number (8b):Device Number (5b):Function Number(3b).
+	 * This bit must be '1' for the guest_vlan field to be
+	 * configured.
 	 */
-	uint16_t	pci_id;
-	uint8_t	unused_0[2];
-} __attribute__((packed));
-
-/* hwrm_func_getfid_output (size:128b/16B) */
-struct hwrm_func_getfid_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
+	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN \
+		UINT32_C(0x2)
 	/*
-	 * FID value.  This value is used to identify operations on the PCI
-	 * bus as belonging to a particular PCI function.
+	 * This bit must be '1' for the async_event_cr field to be
+	 * configured.
 	 */
-	uint16_t	fid;
-	uint8_t	unused_0[5];
+	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR \
+		UINT32_C(0x4)
 	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
+	 * This bit must be '1' for the dflt_mac_addr field to be
+	 * configured.
 	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**********************
- * hwrm_func_vf_alloc *
- **********************/
-
-
-/* hwrm_func_vf_alloc_input (size:192b/24B) */
-struct hwrm_func_vf_alloc_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
+	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_DFLT_MAC_ADDR \
+		UINT32_C(0x8)
 	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
+	 * This bit must be '1' for the num_rsscos_ctxs field to be
+	 * configured.
 	 */
-	uint16_t	cmpl_ring;
+	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS \
+		UINT32_C(0x10)
 	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 * This bit must be '1' for the num_cmpl_rings field to be
+	 * configured.
 	 */
-	uint16_t	seq_id;
+	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_CMPL_RINGS \
+		UINT32_C(0x20)
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * This bit must be '1' for the num_tx_rings field to be
+	 * configured.
 	 */
-	uint16_t	target_id;
+	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_TX_RINGS \
+		UINT32_C(0x40)
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * This bit must be '1' for the num_rx_rings field to be
+	 * configured.
 	 */
-	uint64_t	resp_addr;
-	uint32_t	enables;
+	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_RX_RINGS \
+		UINT32_C(0x80)
 	/*
-	 * This bit must be '1' for the first_vf_id field to be
+	 * This bit must be '1' for the num_l2_ctxs field to be
 	 * configured.
 	 */
-	#define HWRM_FUNC_VF_ALLOC_INPUT_ENABLES_FIRST_VF_ID     UINT32_C(0x1)
+	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_L2_CTXS \
+		UINT32_C(0x100)
 	/*
-	 * This value is used to identify a Virtual Function (VF).
-	 * The scope of VF ID is local within a PF.
-	 */
-	uint16_t	first_vf_id;
-	/* The number of virtual functions requested. */
-	uint16_t	num_vfs;
-} __attribute__((packed));
-
-/* hwrm_func_vf_alloc_output (size:128b/16B) */
-struct hwrm_func_vf_alloc_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* The ID of the first VF allocated. */
-	uint16_t	first_vf_id;
-	uint8_t	unused_0[5];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/*********************
- * hwrm_func_vf_free *
- *********************/
-
-
-/* hwrm_func_vf_free_input (size:192b/24B) */
-struct hwrm_func_vf_free_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the first_vf_id field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VF_FREE_INPUT_ENABLES_FIRST_VF_ID     UINT32_C(0x1)
-	/*
-	 * This value is used to identify a Virtual Function (VF).
-	 * The scope of VF ID is local within a PF.
-	 */
-	uint16_t	first_vf_id;
-	/*
-	 * The number of virtual functions requested.
-	 * 0xFFFF - Cleanup all children of this PF.
-	 */
-	uint16_t	num_vfs;
-} __attribute__((packed));
-
-/* hwrm_func_vf_free_output (size:128b/16B) */
-struct hwrm_func_vf_free_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/********************
- * hwrm_func_vf_cfg *
- ********************/
-
-
-/* hwrm_func_vf_cfg_input (size:448b/56B) */
-struct hwrm_func_vf_cfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the mtu field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU \
-		UINT32_C(0x1)
-	/*
-	 * This bit must be '1' for the guest_vlan field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN \
-		UINT32_C(0x2)
-	/*
-	 * This bit must be '1' for the async_event_cr field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR \
-		UINT32_C(0x4)
-	/*
-	 * This bit must be '1' for the dflt_mac_addr field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_DFLT_MAC_ADDR \
-		UINT32_C(0x8)
-	/*
-	 * This bit must be '1' for the num_rsscos_ctxs field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS \
-		UINT32_C(0x10)
-	/*
-	 * This bit must be '1' for the num_cmpl_rings field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_CMPL_RINGS \
-		UINT32_C(0x20)
-	/*
-	 * This bit must be '1' for the num_tx_rings field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_TX_RINGS \
-		UINT32_C(0x40)
-	/*
-	 * This bit must be '1' for the num_rx_rings field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_RX_RINGS \
-		UINT32_C(0x80)
-	/*
-	 * This bit must be '1' for the num_l2_ctxs field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_L2_CTXS \
-		UINT32_C(0x100)
-	/*
-	 * This bit must be '1' for the num_vnics field to be
-	 * configured.
+	 * This bit must be '1' for the num_vnics field to be
+	 * configured.
 	 */
 	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_VNICS \
 		UINT32_C(0x200)
@@ -5305,6 +4809,20 @@ struct hwrm_func_qcaps_output {
 	 */
 	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ADMIN_PF_SUPPORTED \
 		UINT32_C(0x40000)
+	/*
+	 * If the query is for a VF, then this flag shall be ignored.
+	 * If this query is for a PF and this flag is set to 1, then
+	 * the PF will know that the firmware has the capability to track
+	 * the virtual link status.
+	 */
+	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_LINK_ADMIN_STATUS_SUPPORTED \
+		UINT32_C(0x80000)
+	/*
+	 * If 1, then this function supports the push mode that uses
+	 * write combine buffers and the long inline tx buffer descriptor.
+	 */
+	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WCB_PUSH_MODE \
+		UINT32_C(0x100000)
 	/*
 	 * This value is current MAC address configured for this
 	 * function. A value of 00-00-00-00-00-00 indicates no
@@ -5547,6 +5065,15 @@ struct hwrm_func_qcfg_output {
 	 */
 	#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_HOST \
 		UINT32_C(0x20)
+	/*
+	 * If the function that is being queried is a PF, then the HWRM shall
+	 * set this field to 0 and the HWRM client shall ignore this field.
+	 * If the function that is being queried is a VF, then the HWRM shall
+	 * set this field to 1 if the queried VF is trusted, otherwise the HWRM
+	 * shall set this field to 0.
+	 */
+	#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_TRUSTED_VF \
+		UINT32_C(0x40)
 	/*
 	 * This value is current MAC address configured for this
 	 * function. A value of 00-00-00-00-00-00 indicates no
@@ -5755,7 +5282,7 @@ struct hwrm_func_qcfg_output {
 	 */
 	#define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_MASK \
 		UINT32_C(0x3)
-	#define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SFT     0
+	#define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SFT          0
 	/* Cache Line Size 64 bytes */
 	#define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SIZE_64 \
 		UINT32_C(0x0)
@@ -5764,10 +5291,25 @@ struct hwrm_func_qcfg_output {
 		UINT32_C(0x1)
 	#define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_LAST \
 		HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SIZE_128
+	/* This value is the virtual link admin state setting. */
+	#define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_MASK \
+		UINT32_C(0xc)
+	#define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_SFT        2
+	/* Admin link state is in forced down mode. */
+	#define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_DOWN \
+		(UINT32_C(0x0) << 2)
+	/* Admin link state is in forced up mode. */
+	#define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_UP \
+		(UINT32_C(0x1) << 2)
+	/* Admin link state is in auto mode  - follows the physical link state. */
+	#define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_AUTO \
+		(UINT32_C(0x2) << 2)
+	#define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_LAST \
+		HWRM_FUNC_QCFG_OUTPUT_OPTIONS_LINK_ADMIN_STATE_AUTO
 	/* Reserved for future. */
 	#define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_RSVD_MASK \
-		UINT32_C(0xfc)
-	#define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_RSVD_SFT               2
+		UINT32_C(0xf0)
+	#define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_RSVD_SFT                    4
 	/*
 	 * The number of VFs that are allocated to the function.
 	 * This is valid only on the PF with SR-IOV enabled.
@@ -5814,13 +5356,13 @@ struct hwrm_func_qcfg_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/***********************
- * hwrm_func_vlan_qcfg *
- ***********************/
+/*****************
+ * hwrm_func_cfg *
+ *****************/
 
 
-/* hwrm_func_vlan_qcfg_input (size:192b/24B) */
-struct hwrm_func_vlan_qcfg_input {
+/* hwrm_func_cfg_input (size:704b/88B) */
+struct hwrm_func_cfg_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -5851,239 +5393,28 @@ struct hwrm_func_vlan_qcfg_input {
 	/*
 	 * Function ID of the function that is being
 	 * configured.
-	 * If set to 0xFF... (All Fs), then the configuration is
+	 * If set to 0xFF... (All Fs), then the the configuration is
 	 * for the requesting function.
 	 */
 	uint16_t	fid;
-	uint8_t	unused_0[6];
-} __attribute__((packed));
-
-/* hwrm_func_vlan_qcfg_output (size:320b/40B) */
-struct hwrm_func_vlan_qcfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
 	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
+	 * This field specifies how many NQs will be reserved for the PF.
+	 * Remaining NQs that belong to the PF become available for VFs.
+	 * Once a PF has created VFs, it cannot change how many NQs are
+	 * reserved for itself (since the NQs must be contiguous in HW).
 	 */
-	uint8_t	valid;
-	/* S-TAG VLAN identifier configured for the function. */
-	uint16_t	stag_vid;
-	/* S-TAG PCP value configured for the function. */
-	uint8_t	stag_pcp;
-	uint8_t	unused_1;
+	uint16_t	num_msix;
+	uint32_t	flags;
 	/*
-	 * S-TAG TPID value configured for the function. This field is specified in
-	 * network byte order.
+	 * When this bit is '1', the function is disabled with
+	 * source MAC address check.
+	 * This is an anti-spoofing check. If this flag is set,
+	 * then the function shall be configured to disallow
+	 * transmission of frames with the source MAC address that
+	 * is configured for this function.
 	 */
-	uint16_t	stag_tpid;
-	/* C-TAG VLAN identifier configured for the function. */
-	uint16_t	ctag_vid;
-	/* C-TAG PCP value configured for the function. */
-	uint8_t	ctag_pcp;
-	uint8_t	unused_2;
-	/*
-	 * C-TAG TPID value configured for the function. This field is specified in
-	 * network byte order.
-	 */
-	uint16_t	ctag_tpid;
-	/* Future use. */
-	uint32_t	rsvd2;
-	/* Future use. */
-	uint32_t	rsvd3;
-	uint32_t	unused_3;
-} __attribute__((packed));
-
-/**********************
- * hwrm_func_vlan_cfg *
- **********************/
-
-
-/* hwrm_func_vlan_cfg_input (size:384b/48B) */
-struct hwrm_func_vlan_cfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/*
-	 * Function ID of the function that is being
-	 * configured.
-	 * If set to 0xFF... (All Fs), then the configuration is
-	 * for the requesting function.
-	 */
-	uint16_t	fid;
-	uint8_t	unused_0[2];
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the stag_vid field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_VID      UINT32_C(0x1)
-	/*
-	 * This bit must be '1' for the ctag_vid field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_VID      UINT32_C(0x2)
-	/*
-	 * This bit must be '1' for the stag_pcp field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_PCP      UINT32_C(0x4)
-	/*
-	 * This bit must be '1' for the ctag_pcp field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_PCP      UINT32_C(0x8)
-	/*
-	 * This bit must be '1' for the stag_tpid field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_TPID     UINT32_C(0x10)
-	/*
-	 * This bit must be '1' for the ctag_tpid field to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_TPID     UINT32_C(0x20)
-	/* S-TAG VLAN identifier configured for the function. */
-	uint16_t	stag_vid;
-	/* S-TAG PCP value configured for the function. */
-	uint8_t	stag_pcp;
-	uint8_t	unused_1;
-	/*
-	 * S-TAG TPID value configured for the function. This field is specified in
-	 * network byte order.
-	 */
-	uint16_t	stag_tpid;
-	/* C-TAG VLAN identifier configured for the function. */
-	uint16_t	ctag_vid;
-	/* C-TAG PCP value configured for the function. */
-	uint8_t	ctag_pcp;
-	uint8_t	unused_2;
-	/*
-	 * C-TAG TPID value configured for the function. This field is specified in
-	 * network byte order.
-	 */
-	uint16_t	ctag_tpid;
-	/* Future use. */
-	uint32_t	rsvd1;
-	/* Future use. */
-	uint32_t	rsvd2;
-	uint8_t	unused_3[4];
-} __attribute__((packed));
-
-/* hwrm_func_vlan_cfg_output (size:128b/16B) */
-struct hwrm_func_vlan_cfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/*****************
- * hwrm_func_cfg *
- *****************/
-
-
-/* hwrm_func_cfg_input (size:704b/88B) */
-struct hwrm_func_cfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/*
-	 * Function ID of the function that is being
-	 * configured.
-	 * If set to 0xFF... (All Fs), then the the configuration is
-	 * for the requesting function.
-	 */
-	uint16_t	fid;
-	/*
-	 * This field specifies how many NQs will be reserved for the PF.
-	 * Remaining NQs that belong to the PF become available for VFs.
-	 * Once a PF has created VFs, it cannot change how many NQs are
-	 * reserved for itself (since the NQs must be contiguous in HW).
-	 */
-	uint16_t	num_msix;
-	uint32_t	flags;
-	/*
-	 * When this bit is '1', the function is disabled with
-	 * source MAC address check.
-	 * This is an anti-spoofing check. If this flag is set,
-	 * then the function shall be configured to disallow
-	 * transmission of frames with the source MAC address that
-	 * is configured for this function.
-	 */
-	#define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE \
-		UINT32_C(0x1)
+	#define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE \
+		UINT32_C(0x1)
 	/*
 	 * When this bit is '1', the function is enabled with
 	 * source MAC address check.
@@ -6205,6 +5536,17 @@ struct hwrm_func_cfg_input {
 	 */
 	#define HWRM_FUNC_CFG_INPUT_FLAGS_L2_CTX_ASSETS_TEST \
 		UINT32_C(0x100000)
+	/*
+	 * This configuration change can be initiated by a PF driver. This
+	 * configuration request shall be targeted to a VF. From local host
+	 * resident HWRM clients, only the parent PF driver shall be allowed
+	 * to initiate this change on one of its children VFs. If this bit is
+	 * set to 1, then the VF that is being configured is requested to be
+	 * trusted. If this bit is set to 0, then the VF that is being configured
+	 * is requested to be not trusted.
+	 */
+	#define HWRM_FUNC_CFG_INPUT_FLAGS_TRUSTED_VF_ENABLE \
+		UINT32_C(0x200000)
 	uint32_t	enables;
 	/*
 	 * This bit must be '1' for the mtu field to be
@@ -6338,6 +5680,12 @@ struct hwrm_func_cfg_input {
 	 */
 	#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MSIX \
 		UINT32_C(0x200000)
+	/*
+	 * This bit must be '1' for the link admin state field to be
+	 * configured.
+	 */
+	#define HWRM_FUNC_CFG_INPUT_ENABLES_ADMIN_LINK_STATE \
+		UINT32_C(0x400000)
 	/*
 	 * The maximum transmission unit of the function.
 	 * The HWRM should make sure that the mtu of
@@ -6569,7 +5917,7 @@ struct hwrm_func_cfg_input {
 	 */
 	#define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_MASK \
 		UINT32_C(0x3)
-	#define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SFT     0
+	#define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SFT          0
 	/* Cache Line Size 64 bytes */
 	#define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SIZE_64 \
 		UINT32_C(0x0)
@@ -6578,10 +5926,25 @@ struct hwrm_func_cfg_input {
 		UINT32_C(0x1)
 	#define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_LAST \
 		HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SIZE_128
+	/* This value is the virtual link admin state setting. */
+	#define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_MASK \
+		UINT32_C(0xc)
+	#define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_SFT        2
+	/* Admin state is forced down. */
+	#define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_DOWN \
+		(UINT32_C(0x0) << 2)
+	/* Admin state is forced up. */
+	#define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_FORCED_UP \
+		(UINT32_C(0x1) << 2)
+	/* Admin state is in auto mode - is to follow the physical link state. */
+	#define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_AUTO \
+		(UINT32_C(0x2) << 2)
+	#define HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_LAST \
+		HWRM_FUNC_CFG_INPUT_OPTIONS_LINK_ADMIN_STATE_AUTO
 	/* Reserved for future. */
 	#define HWRM_FUNC_CFG_INPUT_OPTIONS_RSVD_MASK \
-		UINT32_C(0xfc)
-	#define HWRM_FUNC_CFG_INPUT_OPTIONS_RSVD_SFT               2
+		UINT32_C(0xf0)
+	#define HWRM_FUNC_CFG_INPUT_OPTIONS_RSVD_SFT                    4
 	/*
 	 * The number of multicast filters that should
 	 * be reserved for this function on the RX side.
@@ -6862,13 +6225,13 @@ struct hwrm_func_vf_resc_free_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/*******************************
- * hwrm_func_vf_vnic_ids_query *
- *******************************/
+/**********************
+ * hwrm_func_drv_rgtr *
+ **********************/
 
 
-/* hwrm_func_vf_vnic_ids_query_input (size:256b/32B) */
-struct hwrm_func_vf_vnic_ids_query_input {
+/* hwrm_func_drv_rgtr_input (size:896b/112B) */
+struct hwrm_func_drv_rgtr_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -6896,98 +6259,27 @@ struct hwrm_func_vf_vnic_ids_query_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
+	uint32_t	flags;
 	/*
-	 * This value is used to identify a Virtual Function (VF).
-	 * The scope of VF ID is local within a PF.
+	 * When this bit is '1', the function driver is requesting
+	 * all requests from its children VF drivers to be
+	 * forwarded to itself.
+	 * This flag can only be set by the PF driver.
+	 * If a VF driver sets this flag, it should be ignored
+	 * by the HWRM.
 	 */
-	uint16_t	vf_id;
-	uint8_t	unused_0[2];
-	/* Max number of vnic ids in vnic id table */
-	uint32_t	max_vnic_id_cnt;
-	/* This is the address for VF VNIC ID table */
-	uint64_t	vnic_id_tbl_addr;
-} __attribute__((packed));
-
-/* hwrm_func_vf_vnic_ids_query_output (size:128b/16B) */
-struct hwrm_func_vf_vnic_ids_query_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
+	#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE \
+		UINT32_C(0x1)
 	/*
-	 * Actual number of vnic ids
-	 *
-	 * Each VNIC ID is written as a 32-bit number.
+	 * When this bit is '1', the function is requesting none of
+	 * the requests from its children VF drivers to be
+	 * forwarded to itself.
+	 * This flag can only be set by the PF driver.
+	 * If a VF driver sets this flag, it should be ignored
+	 * by the HWRM.
 	 */
-	uint32_t	vnic_id_cnt;
-	uint8_t	unused_0[3];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**********************
- * hwrm_func_drv_rgtr *
- **********************/
-
-
-/* hwrm_func_drv_rgtr_input (size:896b/112B) */
-struct hwrm_func_drv_rgtr_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	flags;
-	/*
-	 * When this bit is '1', the function driver is requesting
-	 * all requests from its children VF drivers to be
-	 * forwarded to itself.
-	 * This flag can only be set by the PF driver.
-	 * If a VF driver sets this flag, it should be ignored
-	 * by the HWRM.
-	 */
-	#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE       UINT32_C(0x1)
-	/*
-	 * When this bit is '1', the function is requesting none of
-	 * the requests from its children VF drivers to be
-	 * forwarded to itself.
-	 * This flag can only be set by the PF driver.
-	 * If a VF driver sets this flag, it should be ignored
-	 * by the HWRM.
-	 */
-	#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE      UINT32_C(0x2)
+	#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE \
+		UINT32_C(0x2)
 	/*
 	 * When this bit is '1', then ver_maj_8b, ver_min_8b, ver_upd_8b
 	 * fields shall be ignored and ver_maj, ver_min, ver_upd
@@ -6996,7 +6288,22 @@ struct hwrm_func_drv_rgtr_input {
 	 * fields shall be used for the driver version information and
 	 * ver_maj, ver_min, ver_upd and ver_patch shall be ignored.
 	 */
-	#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_16BIT_VER_MODE     UINT32_C(0x4)
+	#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_16BIT_VER_MODE \
+		UINT32_C(0x4)
+	/*
+	 * When this bit is '1', the function is indicating support of
+	 * 64bit flow handle.  The firmware that only supports 64bit flow
+	 * handle should check this bit before allowing processing of
+	 * HWRM_CFA_FLOW_XXX commands from the requesting function as firmware
+	 * with 64bit flow handle support can only be compatible with drivers
+	 * that support 64bit flow handle. The legacy drivers that don't support
+	 * 64bit flow handle won't be able to use HWRM_CFA_FLOW_XXX commands when
+	 * running with new firmware that only supports 64bit flow handle. The new
+	 * firmware support 64bit flow handle returns HWRM_ERR_CODE_CMD_NOT_SUPPORTED
+	 * status to the legacy driver when encounters these commands.
+	 */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FLOW_HANDLE_64BIT_MODE \
+		UINT32_C(0x8)
 	uint32_t	enables;
 	/*
 	 * This bit must be '1' for the os_type field to be
@@ -7117,7 +6424,14 @@ struct hwrm_func_drv_rgtr_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	uint8_t	unused_0[7];
+	uint32_t	flags;
+	/*
+	 * When this bit is '1', it indicates that the
+	 * HWRM_FUNC_DRV_IF_CHANGE call is supported.
+	 */
+	#define HWRM_FUNC_DRV_RGTR_OUTPUT_FLAGS_IF_CHANGE_SUPPORTED \
+		UINT32_C(0x1)
+	uint8_t	unused_0[3];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -7441,7 +6755,7 @@ struct hwrm_func_drv_qver_input {
 	uint8_t	unused_0[2];
 } __attribute__((packed));
 
-/* hwrm_func_drv_qver_output (size:192b/24B) */
+/* hwrm_func_drv_qver_output (size:256b/32B) */
 struct hwrm_func_drv_qver_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
@@ -7483,15 +6797,7 @@ struct hwrm_func_drv_qver_output {
 	uint8_t	ver_min_8b;
 	/* This is the 8bit update version of the driver. */
 	uint8_t	ver_upd_8b;
-	uint8_t	unused_0[2];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
+	uint8_t	unused_0[3];
 	/* This is the 16bit major version of the driver. */
 	uint16_t	ver_maj;
 	/* This is the 16bit minor version of the driver. */
@@ -7500,6 +6806,15 @@ struct hwrm_func_drv_qver_output {
 	uint16_t	ver_upd;
 	/* This is the 16bit patch version of the driver. */
 	uint16_t	ver_patch;
+	uint8_t	unused_1[7];
+	/*
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
+	 */
+	uint8_t	valid;
 } __attribute__((packed));
 
 /****************************
@@ -7612,7 +6927,15 @@ struct hwrm_func_resource_qcaps_output {
 	 * The number of TX rings assigned to the function cannot exceed this value.
 	 */
 	uint16_t	max_tx_scheduler_inputs;
-	uint8_t	unused_0[7];
+	uint16_t	flags;
+	/*
+	 * When this bit is '1', it indicates that VF_RESOURCE_CFG supports
+	 * feature to reserve all minimum resources when minimum >= 1, otherwise
+	 * returns an error.
+	 */
+	#define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_FLAGS_MIN_GUARANTEED \
+		UINT32_C(0x1)
+	uint8_t	unused_0[5];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -7623,13 +6946,13 @@ struct hwrm_func_resource_qcaps_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/*****************************
- * hwrm_func_vf_resource_cfg *
- *****************************/
+/***********************
+ * hwrm_func_vlan_qcfg *
+ ***********************/
 
 
-/* hwrm_func_vf_resource_cfg_input (size:448b/56B) */
-struct hwrm_func_vf_resource_cfg_input {
+/* hwrm_func_vlan_qcfg_input (size:192b/24B) */
+struct hwrm_func_vlan_qcfg_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -7657,47 +6980,18 @@ struct hwrm_func_vf_resource_cfg_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	/* VF ID that is being configured by PF */
-	uint16_t	vf_id;
-	/* Maximum guaranteed number of MSI-X vectors for the function */
-	uint16_t	max_msix;
-	/* Minimum guaranteed number of RSS/COS contexts */
-	uint16_t	min_rsscos_ctx;
-	/* Maximum non-guaranteed number of RSS/COS contexts */
-	uint16_t	max_rsscos_ctx;
-	/* Minimum guaranteed number of completion rings */
-	uint16_t	min_cmpl_rings;
-	/* Maximum non-guaranteed number of completion rings */
-	uint16_t	max_cmpl_rings;
-	/* Minimum guaranteed number of transmit rings */
-	uint16_t	min_tx_rings;
-	/* Maximum non-guaranteed number of transmit rings */
-	uint16_t	max_tx_rings;
-	/* Minimum guaranteed number of receive rings */
-	uint16_t	min_rx_rings;
-	/* Maximum non-guaranteed number of receive rings */
-	uint16_t	max_rx_rings;
-	/* Minimum guaranteed number of L2 contexts */
-	uint16_t	min_l2_ctxs;
-	/* Maximum non-guaranteed number of L2 contexts */
-	uint16_t	max_l2_ctxs;
-	/* Minimum guaranteed number of VNICs */
-	uint16_t	min_vnics;
-	/* Maximum non-guaranteed number of VNICs */
-	uint16_t	max_vnics;
-	/* Minimum guaranteed number of statistic contexts */
-	uint16_t	min_stat_ctx;
-	/* Maximum non-guaranteed number of statistic contexts */
-	uint16_t	max_stat_ctx;
-	/* Minimum guaranteed number of ring groups */
-	uint16_t	min_hw_ring_grps;
-	/* Maximum non-guaranteed number of ring groups */
-	uint16_t	max_hw_ring_grps;
-	uint8_t	unused_0[4];
+	/*
+	 * Function ID of the function that is being
+	 * configured.
+	 * If set to 0xFF... (All Fs), then the configuration is
+	 * for the requesting function.
+	 */
+	uint16_t	fid;
+	uint8_t	unused_0[6];
 } __attribute__((packed));
 
-/* hwrm_func_vf_resource_cfg_output (size:256b/32B) */
-struct hwrm_func_vf_resource_cfg_output {
+/* hwrm_func_vlan_qcfg_output (size:320b/40B) */
+struct hwrm_func_vlan_qcfg_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -7706,23 +7000,32 @@ struct hwrm_func_vf_resource_cfg_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* Reserved number of RSS/COS contexts */
-	uint16_t	reserved_rsscos_ctx;
-	/* Reserved number of completion rings */
-	uint16_t	reserved_cmpl_rings;
-	/* Reserved number of transmit rings */
-	uint16_t	reserved_tx_rings;
-	/* Reserved number of receive rings */
-	uint16_t	reserved_rx_rings;
-	/* Reserved number of L2 contexts */
-	uint16_t	reserved_l2_ctxs;
-	/* Reserved number of VNICs */
-	uint16_t	reserved_vnics;
-	/* Reserved number of statistic contexts */
-	uint16_t	reserved_stat_ctx;
-	/* Reserved number of ring groups */
-	uint16_t	reserved_hw_ring_grps;
-	uint8_t	unused_0[7];
+	uint64_t	unused_0;
+	/* S-TAG VLAN identifier configured for the function. */
+	uint16_t	stag_vid;
+	/* S-TAG PCP value configured for the function. */
+	uint8_t	stag_pcp;
+	uint8_t	unused_1;
+	/*
+	 * S-TAG TPID value configured for the function. This field is specified in
+	 * network byte order.
+	 */
+	uint16_t	stag_tpid;
+	/* C-TAG VLAN identifier configured for the function. */
+	uint16_t	ctag_vid;
+	/* C-TAG PCP value configured for the function. */
+	uint8_t	ctag_pcp;
+	uint8_t	unused_2;
+	/*
+	 * C-TAG TPID value configured for the function. This field is specified in
+	 * network byte order.
+	 */
+	uint16_t	ctag_tpid;
+	/* Future use. */
+	uint32_t	rsvd2;
+	/* Future use. */
+	uint32_t	rsvd3;
+	uint8_t	unused_3[3];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -7733,13 +7036,13 @@ struct hwrm_func_vf_resource_cfg_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/*********************************
- * hwrm_func_backing_store_qcaps *
- *********************************/
+/**********************
+ * hwrm_func_vlan_cfg *
+ **********************/
 
 
-/* hwrm_func_backing_store_qcaps_input (size:128b/16B) */
-struct hwrm_func_backing_store_qcaps_input {
+/* hwrm_func_vlan_cfg_input (size:384b/48B) */
+struct hwrm_func_vlan_cfg_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -7767,10 +7070,74 @@ struct hwrm_func_backing_store_qcaps_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
+	/*
+	 * Function ID of the function that is being
+	 * configured.
+	 * If set to 0xFF... (All Fs), then the configuration is
+	 * for the requesting function.
+	 */
+	uint16_t	fid;
+	uint8_t	unused_0[2];
+	uint32_t	enables;
+	/*
+	 * This bit must be '1' for the stag_vid field to be
+	 * configured.
+	 */
+	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_VID      UINT32_C(0x1)
+	/*
+	 * This bit must be '1' for the ctag_vid field to be
+	 * configured.
+	 */
+	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_VID      UINT32_C(0x2)
+	/*
+	 * This bit must be '1' for the stag_pcp field to be
+	 * configured.
+	 */
+	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_PCP      UINT32_C(0x4)
+	/*
+	 * This bit must be '1' for the ctag_pcp field to be
+	 * configured.
+	 */
+	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_PCP      UINT32_C(0x8)
+	/*
+	 * This bit must be '1' for the stag_tpid field to be
+	 * configured.
+	 */
+	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_TPID     UINT32_C(0x10)
+	/*
+	 * This bit must be '1' for the ctag_tpid field to be
+	 * configured.
+	 */
+	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_TPID     UINT32_C(0x20)
+	/* S-TAG VLAN identifier configured for the function. */
+	uint16_t	stag_vid;
+	/* S-TAG PCP value configured for the function. */
+	uint8_t	stag_pcp;
+	uint8_t	unused_1;
+	/*
+	 * S-TAG TPID value configured for the function. This field is specified in
+	 * network byte order.
+	 */
+	uint16_t	stag_tpid;
+	/* C-TAG VLAN identifier configured for the function. */
+	uint16_t	ctag_vid;
+	/* C-TAG PCP value configured for the function. */
+	uint8_t	ctag_pcp;
+	uint8_t	unused_2;
+	/*
+	 * C-TAG TPID value configured for the function. This field is specified in
+	 * network byte order.
+	 */
+	uint16_t	ctag_tpid;
+	/* Future use. */
+	uint32_t	rsvd1;
+	/* Future use. */
+	uint32_t	rsvd2;
+	uint8_t	unused_3[4];
 } __attribute__((packed));
 
-/* hwrm_func_backing_store_qcaps_output (size:512b/64B) */
-struct hwrm_func_backing_store_qcaps_output {
+/* hwrm_func_vlan_cfg_output (size:128b/16B) */
+struct hwrm_func_vlan_cfg_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -7779,53 +7146,7 @@ struct hwrm_func_backing_store_qcaps_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* Maximum number of QP context entries supported for this function. */
-	uint32_t	qp_max_entries;
-	/*
-	 * Minimum number of QP context entries that are needed to be reserved
-	 * for QP1 for the PF and its VFs. PF drivers must allocate at least
-	 * this many QP context entries, even if RoCE will not be used.
-	 */
-	uint16_t	qp_min_qp1_entries;
-	/* Maximum number of QP context entries that can be used for L2. */
-	uint16_t	qp_max_l2_entries;
-	/* Number of bytes that must be allocated for each context entry. */
-	uint16_t	qp_entry_size;
-	/* Maximum number of SRQ context entries that can be used for L2. */
-	uint16_t	srq_max_l2_entries;
-	/* Maximum number of SRQ context entries supported for this function. */
-	uint32_t	srq_max_entries;
-	/* Number of bytes that must be allocated for each context entry. */
-	uint16_t	srq_entry_size;
-	/* Maximum number of CQ context entries that can be used for L2. */
-	uint16_t	cq_max_l2_entries;
-	/* Maximum number of CQ context entries supported for this function. */
-	uint32_t	cq_max_entries;
-	/* Number of bytes that must be allocated for each context entry. */
-	uint16_t	cq_entry_size;
-	/* Maximum number of VNIC context entries supported for this function. */
-	uint16_t	vnic_max_vnic_entries;
-	/* Maximum number of Ring table context entries supported for this function. */
-	uint16_t	vnic_max_ring_table_entries;
-	/* Number of bytes that must be allocated for each context entry. */
-	uint16_t	vnic_entry_size;
-	/* Maximum number of statistic context entries supported for this function. */
-	uint32_t	stat_max_entries;
-	/* Number of bytes that must be allocated for each context entry. */
-	uint16_t	stat_entry_size;
-	/* Maximum number of TQM context entries supported per ring. */
-	uint16_t	tqm_max_entries_per_ring;
-	/* Number of bytes that must be allocated for each context entry. */
-	uint16_t	tqm_entry_size;
-	/* Number of bytes that must be allocated for each context entry. */
-	uint16_t	mrav_entry_size;
-	/* Maximum number of MR/AV context entries supported for this function. */
-	uint32_t	mrav_max_entries;
-	/* Maximum number of Timer context entries supported for this function. */
-	uint32_t	tim_max_entries;
-	/* Number of bytes that must be allocated for each context entry. */
-	uint16_t	tim_entry_size;
-	uint8_t	unused_0;
+	uint8_t	unused_0[7];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -7837,12 +7158,12 @@ struct hwrm_func_backing_store_qcaps_output {
 } __attribute__((packed));
 
 /*******************************
- * hwrm_func_backing_store_cfg *
+ * hwrm_func_vf_vnic_ids_query *
  *******************************/
 
 
-/* hwrm_func_backing_store_cfg_input (size:2048b/256B) */
-struct hwrm_func_backing_store_cfg_input {
+/* hwrm_func_vf_vnic_ids_query_input (size:256b/32B) */
+struct hwrm_func_vf_vnic_ids_query_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -7870,862 +7191,150 @@ struct hwrm_func_backing_store_cfg_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	uint32_t	flags;
-	/*
-	 * When set, the firmware only uses on-chip resources and does not
-	 * expect any backing store to be provided by the host driver. This
-	 * mode provides minimal L2 functionality (e.g. limited L2 resources,
-	 * no RoCE).
-	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_FLAGS_PREBOOT_MODE \
-		UINT32_C(0x1)
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the qp fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_QP \
-		UINT32_C(0x1)
 	/*
-	 * This bit must be '1' for the srq fields to be
-	 * configured.
+	 * This value is used to identify a Virtual Function (VF).
+	 * The scope of VF ID is local within a PF.
 	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_SRQ \
-		UINT32_C(0x2)
-	/*
-	 * This bit must be '1' for the cq fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_CQ \
-		UINT32_C(0x4)
-	/*
-	 * This bit must be '1' for the vnic fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_VNIC \
-		UINT32_C(0x8)
-	/*
-	 * This bit must be '1' for the stat fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_STAT \
-		UINT32_C(0x10)
-	/*
-	 * This bit must be '1' for the tqm_sp fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_SP \
-		UINT32_C(0x20)
-	/*
-	 * This bit must be '1' for the tqm_ring0 fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING0 \
-		UINT32_C(0x40)
-	/*
-	 * This bit must be '1' for the tqm_ring1 fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING1 \
-		UINT32_C(0x80)
-	/*
-	 * This bit must be '1' for the tqm_ring2 fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING2 \
-		UINT32_C(0x100)
+	uint16_t	vf_id;
+	uint8_t	unused_0[2];
+	/* Max number of vnic ids in vnic id table */
+	uint32_t	max_vnic_id_cnt;
+	/* This is the address for VF VNIC ID table */
+	uint64_t	vnic_id_tbl_addr;
+} __attribute__((packed));
+
+/* hwrm_func_vf_vnic_ids_query_output (size:128b/16B) */
+struct hwrm_func_vf_vnic_ids_query_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
 	/*
-	 * This bit must be '1' for the tqm_ring3 fields to be
-	 * configured.
+	 * Actual number of vnic ids
+	 *
+	 * Each VNIC ID is written as a 32-bit number.
 	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING3 \
-		UINT32_C(0x200)
+	uint32_t	vnic_id_cnt;
+	uint8_t	unused_0[3];
 	/*
-	 * This bit must be '1' for the tqm_ring4 fields to be
-	 * configured.
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
 	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING4 \
-		UINT32_C(0x400)
+	uint8_t	valid;
+} __attribute__((packed));
+
+/***********************
+ * hwrm_func_vf_bw_cfg *
+ ***********************/
+
+
+/* hwrm_func_vf_bw_cfg_input (size:960b/120B) */
+struct hwrm_func_vf_bw_cfg_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
 	/*
-	 * This bit must be '1' for the tqm_ring5 fields to be
-	 * configured.
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
 	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING5 \
-		UINT32_C(0x800)
+	uint16_t	cmpl_ring;
 	/*
-	 * This bit must be '1' for the tqm_ring6 fields to be
-	 * configured.
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING6 \
-		UINT32_C(0x1000)
+	uint16_t	seq_id;
 	/*
-	 * This bit must be '1' for the tqm_ring7 fields to be
-	 * configured.
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
 	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING7 \
-		UINT32_C(0x2000)
+	uint16_t	target_id;
 	/*
-	 * This bit must be '1' for the mrav fields to be
-	 * configured.
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_MRAV \
-		UINT32_C(0x4000)
+	uint64_t	resp_addr;
 	/*
-	 * This bit must be '1' for the tim fields to be
-	 * configured.
+	 * The number of VF functions that are being configured.
+	 * The cmd space allows up to 50 VFs' BW to be configured with one cmd.
 	 */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TIM \
-		UINT32_C(0x8000)
-	/* QPC page size and level. */
-	uint8_t	qpc_pg_size_qpc_lvl;
-	/* QPC PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_2
-	/* QPC page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_1G
-	/* SRQ page size and level. */
-	uint8_t	srq_pg_size_srq_lvl;
-	/* SRQ PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_2
-	/* SRQ page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_1G
-	/* CQ page size and level. */
-	uint8_t	cq_pg_size_cq_lvl;
-	/* CQ PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_2
-	/* CQ page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_1G
-	/* VNIC page size and level. */
-	uint8_t	vnic_pg_size_vnic_lvl;
-	/* VNIC PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_2
-	/* VNIC page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_1G
-	/* Stat page size and level. */
-	uint8_t	stat_pg_size_stat_lvl;
-	/* Stat PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_2
-	/* Stat page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_1G
-	/* TQM slow path page size and level. */
-	uint8_t	tqm_sp_pg_size_tqm_sp_lvl;
-	/* TQM slow path PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_2
-	/* TQM slow path page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_1G
-	/* TQM ring 0 page size and level. */
-	uint8_t	tqm_ring0_pg_size_tqm_ring0_lvl;
-	/* TQM ring 0 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_2
-	/* TQM ring 0 page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_1G
-	/* TQM ring 1 page size and level. */
-	uint8_t	tqm_ring1_pg_size_tqm_ring1_lvl;
-	/* TQM ring 1 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_2
-	/* TQM ring 1 page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_1G
-	/* TQM ring 2 page size and level. */
-	uint8_t	tqm_ring2_pg_size_tqm_ring2_lvl;
-	/* TQM ring 2 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_2
-	/* TQM ring 2 page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_1G
-	/* TQM ring 3 page size and level. */
-	uint8_t	tqm_ring3_pg_size_tqm_ring3_lvl;
-	/* TQM ring 3 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_2
-	/* TQM ring 3 page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_1G
-	/* TQM ring 4 page size and level. */
-	uint8_t	tqm_ring4_pg_size_tqm_ring4_lvl;
-	/* TQM ring 4 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_2
-	/* TQM ring 4 page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_1G
-	/* TQM ring 5 page size and level. */
-	uint8_t	tqm_ring5_pg_size_tqm_ring5_lvl;
-	/* TQM ring 5 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_2
-	/* TQM ring 5 page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_1G
-	/* TQM ring 6 page size and level. */
-	uint8_t	tqm_ring6_pg_size_tqm_ring6_lvl;
-	/* TQM ring 6 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_2
-	/* TQM ring 6 page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_1G
-	/* TQM ring 7 page size and level. */
-	uint8_t	tqm_ring7_pg_size_tqm_ring7_lvl;
-	/* TQM ring 7 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_2
-	/* TQM ring 7 page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_1G
-	/* MR/AV page size and level. */
-	uint8_t	mrav_pg_size_mrav_lvl;
-	/* MR/AV PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_2
-	/* MR/AV page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_1G
-	/* Timer page size and level. */
-	uint8_t	tim_pg_size_tim_lvl;
-	/* Timer PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_2
-	/* Timer page size. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_1G
-	/* QP page directory. */
-	uint64_t	qpc_page_dir;
-	/* SRQ page directory. */
-	uint64_t	srq_page_dir;
-	/* CQ page directory. */
-	uint64_t	cq_page_dir;
-	/* VNIC page directory. */
-	uint64_t	vnic_page_dir;
-	/* Stat page directory. */
-	uint64_t	stat_page_dir;
-	/* TQM slowpath page directory. */
-	uint64_t	tqm_sp_page_dir;
-	/* TQM ring 0 page directory. */
-	uint64_t	tqm_ring0_page_dir;
-	/* TQM ring 1 page directory. */
-	uint64_t	tqm_ring1_page_dir;
-	/* TQM ring 2 page directory. */
-	uint64_t	tqm_ring2_page_dir;
-	/* TQM ring 3 page directory. */
-	uint64_t	tqm_ring3_page_dir;
-	/* TQM ring 4 page directory. */
-	uint64_t	tqm_ring4_page_dir;
-	/* TQM ring 5 page directory. */
-	uint64_t	tqm_ring5_page_dir;
-	/* TQM ring 6 page directory. */
-	uint64_t	tqm_ring6_page_dir;
-	/* TQM ring 7 page directory. */
-	uint64_t	tqm_ring7_page_dir;
-	/* MR/AV page directory. */
-	uint64_t	mrav_page_dir;
-	/* Timer page directory. */
-	uint64_t	tim_page_dir;
-	/* Number of QPs. */
-	uint32_t	qp_num_entries;
-	/* Number of SRQs. */
-	uint32_t	srq_num_entries;
-	/* Number of CQs. */
-	uint32_t	cq_num_entries;
-	/* Number of Stats. */
-	uint32_t	stat_num_entries;
-	/* Number of TQM slowpath entries. */
-	uint32_t	tqm_sp_num_entries;
-	/* Number of TQM ring 0 entries. */
-	uint32_t	tqm_ring0_num_entries;
-	/* Number of TQM ring 1 entries. */
-	uint32_t	tqm_ring1_num_entries;
-	/* Number of TQM ring 2 entries. */
-	uint32_t	tqm_ring2_num_entries;
-	/* Number of TQM ring 3 entries. */
-	uint32_t	tqm_ring3_num_entries;
-	/* Number of TQM ring 4 entries. */
-	uint32_t	tqm_ring4_num_entries;
-	/* Number of TQM ring 5 entries. */
-	uint32_t	tqm_ring5_num_entries;
-	/* Number of TQM ring 6 entries. */
-	uint32_t	tqm_ring6_num_entries;
-	/* Number of TQM ring 7 entries. */
-	uint32_t	tqm_ring7_num_entries;
-	/* Number of MR/AV entries. */
-	uint32_t	mrav_num_entries;
-	/* Number of Timer entries. */
-	uint32_t	tim_num_entries;
-	/* Number of entries to reserve for QP1 */
-	uint16_t	qp_num_qp1_entries;
-	/* Number of entries to reserve for L2 */
-	uint16_t	qp_num_l2_entries;
-	/* Number of bytes that have been allocated for each context entry. */
-	uint16_t	qp_entry_size;
-	/* Number of entries to reserve for L2 */
-	uint16_t	srq_num_l2_entries;
-	/* Number of bytes that have been allocated for each context entry. */
-	uint16_t	srq_entry_size;
-	/* Number of entries to reserve for L2 */
-	uint16_t	cq_num_l2_entries;
-	/* Number of bytes that have been allocated for each context entry. */
-	uint16_t	cq_entry_size;
-	/* Number of entries to reserve for VNIC entries */
-	uint16_t	vnic_num_vnic_entries;
-	/* Number of entries to reserve for Ring table entries */
-	uint16_t	vnic_num_ring_table_entries;
-	/* Number of bytes that have been allocated for each context entry. */
-	uint16_t	vnic_entry_size;
-	/* Number of bytes that have been allocated for each context entry. */
-	uint16_t	stat_entry_size;
-	/* Number of bytes that have been allocated for each context entry. */
-	uint16_t	tqm_entry_size;
-	/* Number of bytes that have been allocated for each context entry. */
-	uint16_t	mrav_entry_size;
-	/* Number of bytes that have been allocated for each context entry. */
-	uint16_t	tim_entry_size;
-} __attribute__((packed));
-
-/* hwrm_func_backing_store_cfg_output (size:128b/16B) */
-struct hwrm_func_backing_store_cfg_output {
+	uint16_t	num_vfs;
+	uint16_t	unused[3];
+	/* These 16-bit fields contain the VF fid and the rate scale percentage. */
+	uint16_t	vfn[48];
+	/* The physical VF id the adjustment will be made to. */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_VFID_MASK     UINT32_C(0xfff)
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_VFID_SFT      0
+	/*
+	 * This field configures the rate scale percentage of the VF as specified
+	 * by the physical VF id.
+	 */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_MASK     UINT32_C(0xf000)
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_SFT      12
+	/* 0% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_0 \
+		(UINT32_C(0x0) << 12)
+	/* 6.66% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_6_66 \
+		(UINT32_C(0x1) << 12)
+	/* 13.33% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_13_33 \
+		(UINT32_C(0x2) << 12)
+	/* 20% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_20 \
+		(UINT32_C(0x3) << 12)
+	/* 26.66% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_26_66 \
+		(UINT32_C(0x4) << 12)
+	/* 33% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_33_33 \
+		(UINT32_C(0x5) << 12)
+	/* 40% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_40 \
+		(UINT32_C(0x6) << 12)
+	/* 46.66% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_46_66 \
+		(UINT32_C(0x7) << 12)
+	/* 53.33% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_53_33 \
+		(UINT32_C(0x8) << 12)
+	/* 60% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_60 \
+		(UINT32_C(0x9) << 12)
+	/* 66.66% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_66_66 \
+		(UINT32_C(0xa) << 12)
+	/* 53.33% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_73_33 \
+		(UINT32_C(0xb) << 12)
+	/* 80% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_80 \
+		(UINT32_C(0xc) << 12)
+	/* 86.66% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_86_66 \
+		(UINT32_C(0xd) << 12)
+	/* 93.33% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_93_33 \
+		(UINT32_C(0xe) << 12)
+	/* 100% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_100 \
+		(UINT32_C(0xf) << 12)
+	#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_LAST \
+		HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_100
+} __attribute__((packed));
+
+/* hwrm_func_vf_bw_cfg_output (size:128b/16B) */
+struct hwrm_func_vf_bw_cfg_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -8745,13 +7354,13 @@ struct hwrm_func_backing_store_cfg_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/********************************
- * hwrm_func_backing_store_qcfg *
- ********************************/
+/************************
+ * hwrm_func_vf_bw_qcfg *
+ ************************/
 
 
-/* hwrm_func_backing_store_qcfg_input (size:128b/16B) */
-struct hwrm_func_backing_store_qcfg_input {
+/* hwrm_func_vf_bw_qcfg_input (size:960b/120B) */
+struct hwrm_func_vf_bw_qcfg_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -8779,10 +7388,22 @@ struct hwrm_func_backing_store_qcfg_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
+	/*
+	 * The number of VF functions that are being queried.
+	 * The inline response space allows the host to query up to 50 VFs'
+	 * rate scale percentage
+	 */
+	uint16_t	num_vfs;
+	uint16_t	unused[3];
+	/* These 16-bit fields contain the VF fid */
+	uint16_t	vfn[48];
+	/* The physical VF id of interest */
+	#define HWRM_FUNC_VF_BW_QCFG_INPUT_VFN_VFID_MASK UINT32_C(0xfff)
+	#define HWRM_FUNC_VF_BW_QCFG_INPUT_VFN_VFID_SFT 0
 } __attribute__((packed));
 
-/* hwrm_func_backing_store_qcfg_output (size:1920b/240B) */
-struct hwrm_func_backing_store_qcfg_output {
+/* hwrm_func_vf_bw_qcfg_output (size:960b/120B) */
+struct hwrm_func_vf_bw_qcfg_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -8791,843 +7412,157 @@ struct hwrm_func_backing_store_qcfg_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	uint32_t	flags;
 	/*
-	 * When set, the firmware only uses on-chip resources and does not
-	 * expect any backing store to be provided by the host driver. This
-	 * mode provides minimal L2 functionality (e.g. limited L2 resources,
-	 * no RoCE).
+	 * The number of VF functions that are being queried.
+	 * The inline response space allows the host to query up to 50 VFs' rate
+	 * scale percentage
 	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_FLAGS_PREBOOT_MODE \
-		UINT32_C(0x1)
-	uint8_t	unused_0[4];
+	uint16_t	num_vfs;
+	uint16_t	unused[3];
+	/* These 16-bit fields contain the VF fid and the rate scale percentage. */
+	uint16_t	vfn[48];
+	/* The physical VF id the adjustment will be made to. */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_VFID_MASK     UINT32_C(0xfff)
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_VFID_SFT      0
+	/*
+	 * This field configures the rate scale percentage of the VF as specified
+	 * by the physical VF id.
+	 */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_MASK     UINT32_C(0xf000)
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_SFT      12
+	/* 0% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_0 \
+		(UINT32_C(0x0) << 12)
+	/* 6.66% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_6_66 \
+		(UINT32_C(0x1) << 12)
+	/* 13.33% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_13_33 \
+		(UINT32_C(0x2) << 12)
+	/* 20% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_20 \
+		(UINT32_C(0x3) << 12)
+	/* 26.66% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_26_66 \
+		(UINT32_C(0x4) << 12)
+	/* 33% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_33_33 \
+		(UINT32_C(0x5) << 12)
+	/* 40% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_40 \
+		(UINT32_C(0x6) << 12)
+	/* 46.66% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_46_66 \
+		(UINT32_C(0x7) << 12)
+	/* 53.33% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_53_33 \
+		(UINT32_C(0x8) << 12)
+	/* 60% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_60 \
+		(UINT32_C(0x9) << 12)
+	/* 66.66% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_66_66 \
+		(UINT32_C(0xa) << 12)
+	/* 53.33% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_73_33 \
+		(UINT32_C(0xb) << 12)
+	/* 80% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_80 \
+		(UINT32_C(0xc) << 12)
+	/* 86.66% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_86_66 \
+		(UINT32_C(0xd) << 12)
+	/* 93.33% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_93_33 \
+		(UINT32_C(0xe) << 12)
+	/* 100% of the max tx rate */
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_100 \
+		(UINT32_C(0xf) << 12)
+	#define HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_LAST \
+		HWRM_FUNC_VF_BW_QCFG_OUTPUT_VFN_RATE_PCT_100
+	uint8_t	unused_0[7];
 	/*
-	 * This bit must be '1' for the qp fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_QP \
-		UINT32_C(0x1)
-	/*
-	 * This bit must be '1' for the srq fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_SRQ \
-		UINT32_C(0x2)
-	/*
-	 * This bit must be '1' for the cq fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_CQ \
-		UINT32_C(0x4)
-	/*
-	 * This bit must be '1' for the vnic fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_VNIC \
-		UINT32_C(0x8)
-	/*
-	 * This bit must be '1' for the stat fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_STAT \
-		UINT32_C(0x10)
-	/*
-	 * This bit must be '1' for the tqm_sp fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_SP \
-		UINT32_C(0x20)
-	/*
-	 * This bit must be '1' for the tqm_ring0 fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING0 \
-		UINT32_C(0x40)
-	/*
-	 * This bit must be '1' for the tqm_ring1 fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING1 \
-		UINT32_C(0x80)
-	/*
-	 * This bit must be '1' for the tqm_ring2 fields to be
-	 * configured.
-	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING2 \
-		UINT32_C(0x100)
-	/*
-	 * This bit must be '1' for the tqm_ring3 fields to be
-	 * configured.
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
 	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING3 \
-		UINT32_C(0x200)
+	uint8_t	valid;
+} __attribute__((packed));
+
+/***************************
+ * hwrm_func_drv_if_change *
+ ***************************/
+
+
+/* hwrm_func_drv_if_change_input (size:192b/24B) */
+struct hwrm_func_drv_if_change_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
 	/*
-	 * This bit must be '1' for the tqm_ring4 fields to be
-	 * configured.
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
 	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING4 \
-		UINT32_C(0x400)
+	uint16_t	cmpl_ring;
 	/*
-	 * This bit must be '1' for the tqm_ring5 fields to be
-	 * configured.
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING5 \
-		UINT32_C(0x800)
+	uint16_t	seq_id;
 	/*
-	 * This bit must be '1' for the tqm_ring6 fields to be
-	 * configured.
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
 	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING6 \
-		UINT32_C(0x1000)
+	uint16_t	target_id;
 	/*
-	 * This bit must be '1' for the tqm_ring7 fields to be
-	 * configured.
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING7 \
-		UINT32_C(0x2000)
+	uint64_t	resp_addr;
+	uint32_t	flags;
 	/*
-	 * This bit must be '1' for the mrav fields to be
-	 * configured.
+	 * When this bit is '1', the function driver is indicating
+	 * that the IF state is changing to UP state.  The call should
+	 * be made at the beginning of the driver's open call before
+	 * resources are allocated.  After making the call, the driver
+	 * should check the response to see if any resources may have
+	 * changed (see the response below).  If the driver fails
+	 * the open call, the driver should make this call again with
+	 * this bit cleared to indicate that the IF state is not UP.
+	 * During the driver's close call when the IF state is changing
+	 * to DOWN, the driver should make this call with the bit cleared
+	 * after all resources have been freed.
 	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_MRAV \
-		UINT32_C(0x4000)
+	#define HWRM_FUNC_DRV_IF_CHANGE_INPUT_FLAGS_UP     UINT32_C(0x1)
+	uint32_t	unused;
+} __attribute__((packed));
+
+/* hwrm_func_drv_if_change_output (size:128b/16B) */
+struct hwrm_func_drv_if_change_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	uint32_t	flags;
 	/*
-	 * This bit must be '1' for the tim fields to be
-	 * configured.
+	 * When this bit is '1', it indicates that the resources reserved
+	 * for this function may have changed.  The driver should check
+	 * resource capabilities and reserve resources again before
+	 * allocating resources.
 	 */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TIM \
-		UINT32_C(0x8000)
-	/* QPC page size and level. */
-	uint8_t	qpc_pg_size_qpc_lvl;
-	/* QPC PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_2
-	/* QPC page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_1G
-	/* SRQ page size and level. */
-	uint8_t	srq_pg_size_srq_lvl;
-	/* SRQ PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_2
-	/* SRQ page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_1G
-	/* CQ page size and level. */
-	uint8_t	cq_pg_size_cq_lvl;
-	/* CQ PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_2
-	/* CQ page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_1G
-	/* VNIC page size and level. */
-	uint8_t	vnic_pg_size_vnic_lvl;
-	/* VNIC PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_2
-	/* VNIC page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_1G
-	/* Stat page size and level. */
-	uint8_t	stat_pg_size_stat_lvl;
-	/* Stat PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_2
-	/* Stat page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_1G
-	/* TQM slow path page size and level. */
-	uint8_t	tqm_sp_pg_size_tqm_sp_lvl;
-	/* TQM slow path PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_2
-	/* TQM slow path page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_1G
-	/* TQM ring 0 page size and level. */
-	uint8_t	tqm_ring0_pg_size_tqm_ring0_lvl;
-	/* TQM ring 0 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_2
-	/* TQM ring 0 page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_1G
-	/* TQM ring 1 page size and level. */
-	uint8_t	tqm_ring1_pg_size_tqm_ring1_lvl;
-	/* TQM ring 1 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_2
-	/* TQM ring 1 page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_1G
-	/* TQM ring 2 page size and level. */
-	uint8_t	tqm_ring2_pg_size_tqm_ring2_lvl;
-	/* TQM ring 2 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_2
-	/* TQM ring 2 page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_1G
-	/* TQM ring 3 page size and level. */
-	uint8_t	tqm_ring3_pg_size_tqm_ring3_lvl;
-	/* TQM ring 3 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_2
-	/* TQM ring 3 page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_1G
-	/* TQM ring 4 page size and level. */
-	uint8_t	tqm_ring4_pg_size_tqm_ring4_lvl;
-	/* TQM ring 4 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_2
-	/* TQM ring 4 page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_1G
-	/* TQM ring 5 page size and level. */
-	uint8_t	tqm_ring5_pg_size_tqm_ring5_lvl;
-	/* TQM ring 5 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_2
-	/* TQM ring 5 page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_1G
-	/* TQM ring 6 page size and level. */
-	uint8_t	tqm_ring6_pg_size_tqm_ring6_lvl;
-	/* TQM ring 6 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_2
-	/* TQM ring 6 page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_1G
-	/* TQM ring 7 page size and level. */
-	uint8_t	tqm_ring7_pg_size_tqm_ring7_lvl;
-	/* TQM ring 7 PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_2
-	/* TQM ring 7 page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_1G
-	/* MR/AV page size and level. */
-	uint8_t	mrav_pg_size_mrav_lvl;
-	/* MR/AV PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_1 \
-		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_2
-	/* MR/AV page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_1G
-	/* Timer page size and level. */
-	uint8_t	tim_pg_size_tim_lvl;
-	/* Timer PBL indirect levels. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_MASK \
-		UINT32_C(0xf)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_SFT       0
-	/* PBL pointer is physical start address. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_0 \
-		UINT32_C(0x0)
-	/* PBL pointer points to PTE table. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_1 \
+	#define HWRM_FUNC_DRV_IF_CHANGE_OUTPUT_FLAGS_RESC_CHANGE \
 		UINT32_C(0x1)
-	/* PBL pointer points to PDE table with each entry pointing to PTE tables. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_2 \
-		UINT32_C(0x2)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_2
-	/* Timer page size. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_SFT   4
-	/* 4KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_4K \
-		(UINT32_C(0x0) << 4)
-	/* 8KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_8K \
-		(UINT32_C(0x1) << 4)
-	/* 64KB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_64K \
-		(UINT32_C(0x2) << 4)
-	/* 2MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_2M \
-		(UINT32_C(0x3) << 4)
-	/* 8MB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_8M \
-		(UINT32_C(0x4) << 4)
-	/* 1GB. */
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_1G \
-		(UINT32_C(0x5) << 4)
-	#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_LAST \
-		HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_1G
-	/* QP page directory. */
-	uint64_t	qpc_page_dir;
-	/* SRQ page directory. */
-	uint64_t	srq_page_dir;
-	/* CQ page directory. */
-	uint64_t	cq_page_dir;
-	/* VNIC page directory. */
-	uint64_t	vnic_page_dir;
-	/* Stat page directory. */
-	uint64_t	stat_page_dir;
-	/* TQM slowpath page directory. */
-	uint64_t	tqm_sp_page_dir;
-	/* TQM ring 0 page directory. */
-	uint64_t	tqm_ring0_page_dir;
-	/* TQM ring 1 page directory. */
-	uint64_t	tqm_ring1_page_dir;
-	/* TQM ring 2 page directory. */
-	uint64_t	tqm_ring2_page_dir;
-	/* TQM ring 3 page directory. */
-	uint64_t	tqm_ring3_page_dir;
-	/* TQM ring 4 page directory. */
-	uint64_t	tqm_ring4_page_dir;
-	/* TQM ring 5 page directory. */
-	uint64_t	tqm_ring5_page_dir;
-	/* TQM ring 6 page directory. */
-	uint64_t	tqm_ring6_page_dir;
-	/* TQM ring 7 page directory. */
-	uint64_t	tqm_ring7_page_dir;
-	/* MR/AV page directory. */
-	uint64_t	mrav_page_dir;
-	/* Timer page directory. */
-	uint64_t	tim_page_dir;
-	/* Number of entries to reserve for QP1 */
-	uint16_t	qp_num_qp1_entries;
-	/* Number of entries to reserve for L2 */
-	uint16_t	qp_num_l2_entries;
-	/* Number of QPs. */
-	uint32_t	qp_num_entries;
-	/* Number of SRQs. */
-	uint32_t	srq_num_entries;
-	/* Number of entries to reserve for L2 */
-	uint16_t	srq_num_l2_entries;
-	/* Number of entries to reserve for L2 */
-	uint16_t	cq_num_l2_entries;
-	/* Number of CQs. */
-	uint32_t	cq_num_entries;
-	/* Number of entries to reserve for VNIC entries */
-	uint16_t	vnic_num_vnic_entries;
-	/* Number of entries to reserve for Ring table entries */
-	uint16_t	vnic_num_ring_table_entries;
-	/* Number of Stats. */
-	uint32_t	stat_num_entries;
-	/* Number of TQM slowpath entries. */
-	uint32_t	tqm_sp_num_entries;
-	/* Number of TQM ring 0 entries. */
-	uint32_t	tqm_ring0_num_entries;
-	/* Number of TQM ring 1 entries. */
-	uint32_t	tqm_ring1_num_entries;
-	/* Number of TQM ring 2 entries. */
-	uint32_t	tqm_ring2_num_entries;
-	/* Number of TQM ring 3 entries. */
-	uint32_t	tqm_ring3_num_entries;
-	/* Number of TQM ring 4 entries. */
-	uint32_t	tqm_ring4_num_entries;
-	/* Number of TQM ring 5 entries. */
-	uint32_t	tqm_ring5_num_entries;
-	/* Number of TQM ring 6 entries. */
-	uint32_t	tqm_ring6_num_entries;
-	/* Number of TQM ring 7 entries. */
-	uint32_t	tqm_ring7_num_entries;
-	/* Number of MR/AV entries. */
-	uint32_t	mrav_num_entries;
-	/* Number of Timer entries. */
-	uint32_t	tim_num_entries;
-	uint8_t	unused_1[7];
+	uint8_t	unused_0[3];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -11916,171 +9851,369 @@ struct hwrm_port_mac_ptp_qcfg_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/********************
- * hwrm_port_qstats *
- ********************/
-
-
-/* hwrm_port_qstats_input (size:320b/40B) */
-struct hwrm_port_qstats_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
+/* Port Tx Statistics Formats */
+/* tx_port_stats (size:3264b/408B) */
+struct tx_port_stats {
+	/* Total Number of 64 Bytes frames transmitted */
+	uint64_t	tx_64b_frames;
+	/* Total Number of 65-127 Bytes frames transmitted */
+	uint64_t	tx_65b_127b_frames;
+	/* Total Number of 128-255 Bytes frames transmitted */
+	uint64_t	tx_128b_255b_frames;
+	/* Total Number of 256-511 Bytes frames transmitted */
+	uint64_t	tx_256b_511b_frames;
+	/* Total Number of 512-1023 Bytes frames transmitted */
+	uint64_t	tx_512b_1023b_frames;
+	/* Total Number of 1024-1518 Bytes frames transmitted */
+	uint64_t	tx_1024b_1518b_frames;
 	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 * Total Number of each good VLAN (exludes FCS errors)
+	 * frame transmitted which is 1519 to 1522 bytes in length
+	 * inclusive (excluding framing bits but including FCS bytes).
 	 */
-	uint16_t	seq_id;
+	uint64_t	tx_good_vlan_frames;
+	/* Total Number of 1519-2047 Bytes frames transmitted */
+	uint64_t	tx_1519b_2047b_frames;
+	/* Total Number of 2048-4095 Bytes frames transmitted */
+	uint64_t	tx_2048b_4095b_frames;
+	/* Total Number of 4096-9216 Bytes frames transmitted */
+	uint64_t	tx_4096b_9216b_frames;
+	/* Total Number of 9217-16383 Bytes frames transmitted */
+	uint64_t	tx_9217b_16383b_frames;
+	/* Total Number of good frames transmitted */
+	uint64_t	tx_good_frames;
+	/* Total Number of frames transmitted */
+	uint64_t	tx_total_frames;
+	/* Total number of unicast frames transmitted */
+	uint64_t	tx_ucast_frames;
+	/* Total number of multicast frames transmitted */
+	uint64_t	tx_mcast_frames;
+	/* Total number of broadcast frames transmitted */
+	uint64_t	tx_bcast_frames;
+	/* Total number of PAUSE control frames transmitted */
+	uint64_t	tx_pause_frames;
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * Total number of PFC/per-priority PAUSE
+	 * control frames transmitted
 	 */
-	uint16_t	target_id;
+	uint64_t	tx_pfc_frames;
+	/* Total number of jabber frames transmitted */
+	uint64_t	tx_jabber_frames;
+	/* Total number of frames transmitted with FCS error */
+	uint64_t	tx_fcs_err_frames;
+	/* Total number of control frames transmitted */
+	uint64_t	tx_control_frames;
+	/* Total number of over-sized frames transmitted */
+	uint64_t	tx_oversz_frames;
+	/* Total number of frames with single deferral */
+	uint64_t	tx_single_dfrl_frames;
+	/* Total number of frames with multiple deferrals */
+	uint64_t	tx_multi_dfrl_frames;
+	/* Total number of frames with single collision */
+	uint64_t	tx_single_coll_frames;
+	/* Total number of frames with multiple collisions */
+	uint64_t	tx_multi_coll_frames;
+	/* Total number of frames with late collisions */
+	uint64_t	tx_late_coll_frames;
+	/* Total number of frames with excessive collisions */
+	uint64_t	tx_excessive_coll_frames;
+	/* Total number of fragmented frames transmitted */
+	uint64_t	tx_frag_frames;
+	/* Total number of transmit errors */
+	uint64_t	tx_err;
+	/* Total number of single VLAN tagged frames transmitted */
+	uint64_t	tx_tagged_frames;
+	/* Total number of double VLAN tagged frames transmitted */
+	uint64_t	tx_dbl_tagged_frames;
+	/* Total number of runt frames transmitted */
+	uint64_t	tx_runt_frames;
+	/* Total number of TX FIFO under runs */
+	uint64_t	tx_fifo_underruns;
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * Total number of PFC frames with PFC enabled bit for
+	 * Pri 0 transmitted
 	 */
-	uint64_t	resp_addr;
-	/* Port ID of port that is being queried. */
-	uint16_t	port_id;
-	uint8_t	unused_0[6];
+	uint64_t	tx_pfc_ena_frames_pri0;
 	/*
-	 * This is the host address where
-	 * Tx port statistics will be stored
+	 * Total number of PFC frames with PFC enabled bit for
+	 * Pri 1 transmitted
 	 */
-	uint64_t	tx_stat_host_addr;
+	uint64_t	tx_pfc_ena_frames_pri1;
 	/*
-	 * This is the host address where
-	 * Rx port statistics will be stored
+	 * Total number of PFC frames with PFC enabled bit for
+	 * Pri 2 transmitted
 	 */
-	uint64_t	rx_stat_host_addr;
-} __attribute__((packed));
-
-/* hwrm_port_qstats_output (size:128b/16B) */
-struct hwrm_port_qstats_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* The size of TX port statistics block in bytes. */
-	uint16_t	tx_stat_size;
-	/* The size of RX port statistics block in bytes. */
-	uint16_t	rx_stat_size;
-	uint8_t	unused_0[3];
+	uint64_t	tx_pfc_ena_frames_pri2;
 	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
+	 * Total number of PFC frames with PFC enabled bit for
+	 * Pri 3 transmitted
 	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/************************
- * hwrm_port_qstats_ext *
- ************************/
-
-
-/* hwrm_port_qstats_ext_input (size:320b/40B) */
-struct hwrm_port_qstats_ext_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
+	uint64_t	tx_pfc_ena_frames_pri3;
 	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
+	 * Total number of PFC frames with PFC enabled bit for
+	 * Pri 4 transmitted
 	 */
-	uint16_t	cmpl_ring;
+	uint64_t	tx_pfc_ena_frames_pri4;
 	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 * Total number of PFC frames with PFC enabled bit for
+	 * Pri 5 transmitted
 	 */
-	uint16_t	seq_id;
+	uint64_t	tx_pfc_ena_frames_pri5;
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * Total number of PFC frames with PFC enabled bit for
+	 * Pri 6 transmitted
 	 */
-	uint16_t	target_id;
+	uint64_t	tx_pfc_ena_frames_pri6;
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * Total number of PFC frames with PFC enabled bit for
+	 * Pri 7 transmitted
 	 */
-	uint64_t	resp_addr;
-	/* Port ID of port that is being queried. */
-	uint16_t	port_id;
+	uint64_t	tx_pfc_ena_frames_pri7;
+	/* Total number of EEE LPI Events on TX */
+	uint64_t	tx_eee_lpi_events;
+	/* EEE LPI Duration Counter on TX */
+	uint64_t	tx_eee_lpi_duration;
 	/*
-	 * The size of TX port extended
-	 * statistics block in bytes.
+	 * Total number of Link Level Flow Control (LLFC) messages
+	 * transmitted
 	 */
-	uint16_t	tx_stat_size;
+	uint64_t	tx_llfc_logical_msgs;
+	/* Total number of HCFC messages transmitted */
+	uint64_t	tx_hcfc_msgs;
+	/* Total number of TX collisions */
+	uint64_t	tx_total_collisions;
+	/* Total number of transmitted bytes */
+	uint64_t	tx_bytes;
+	/* Total number of end-to-end HOL frames */
+	uint64_t	tx_xthol_frames;
+	/* Total Tx Drops per Port reported by STATS block */
+	uint64_t	tx_stat_discard;
+	/* Total Tx Error Drops per Port reported by STATS block */
+	uint64_t	tx_stat_error;
+} __attribute__((packed));
+
+/* Port Rx Statistics Formats */
+/* rx_port_stats (size:4224b/528B) */
+struct rx_port_stats {
+	/* Total Number of 64 Bytes frames received */
+	uint64_t	rx_64b_frames;
+	/* Total Number of 65-127 Bytes frames received */
+	uint64_t	rx_65b_127b_frames;
+	/* Total Number of 128-255 Bytes frames received */
+	uint64_t	rx_128b_255b_frames;
+	/* Total Number of 256-511 Bytes frames received */
+	uint64_t	rx_256b_511b_frames;
+	/* Total Number of 512-1023 Bytes frames received */
+	uint64_t	rx_512b_1023b_frames;
+	/* Total Number of 1024-1518 Bytes frames received */
+	uint64_t	rx_1024b_1518b_frames;
 	/*
-	 * The size of RX port extended
-	 * statistics block in bytes
+	 * Total Number of each good VLAN (exludes FCS errors)
+	 * frame received which is 1519 to 1522 bytes in length
+	 * inclusive (excluding framing bits but including FCS bytes).
 	 */
-	uint16_t	rx_stat_size;
-	uint8_t	unused_0[2];
+	uint64_t	rx_good_vlan_frames;
+	/* Total Number of 1519-2047 Bytes frames received */
+	uint64_t	rx_1519b_2047b_frames;
+	/* Total Number of 2048-4095 Bytes frames received */
+	uint64_t	rx_2048b_4095b_frames;
+	/* Total Number of 4096-9216 Bytes frames received */
+	uint64_t	rx_4096b_9216b_frames;
+	/* Total Number of 9217-16383 Bytes frames received */
+	uint64_t	rx_9217b_16383b_frames;
+	/* Total number of frames received */
+	uint64_t	rx_total_frames;
+	/* Total number of unicast frames received */
+	uint64_t	rx_ucast_frames;
+	/* Total number of multicast frames received */
+	uint64_t	rx_mcast_frames;
+	/* Total number of broadcast frames received */
+	uint64_t	rx_bcast_frames;
+	/* Total number of received frames with FCS error */
+	uint64_t	rx_fcs_err_frames;
+	/* Total number of control frames received */
+	uint64_t	rx_ctrl_frames;
+	/* Total number of PAUSE frames received */
+	uint64_t	rx_pause_frames;
+	/* Total number of PFC frames received */
+	uint64_t	rx_pfc_frames;
 	/*
-	 * This is the host address where
-	 * Tx port statistics will be stored
+	 * Total number of frames received with an unsupported
+	 * opcode
 	 */
-	uint64_t	tx_stat_host_addr;
+	uint64_t	rx_unsupported_opcode_frames;
 	/*
-	 * This is the host address where
-	 * Rx port statistics will be stored
+	 * Total number of frames received with an unsupported
+	 * DA for pause and PFC
 	 */
-	uint64_t	rx_stat_host_addr;
-} __attribute__((packed));
-
-/* hwrm_port_qstats_ext_output (size:128b/16B) */
-struct hwrm_port_qstats_ext_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* The size of TX port statistics block in bytes. */
-	uint16_t	tx_stat_size;
-	/* The size of RX port statistics block in bytes. */
-	uint16_t	rx_stat_size;
-	uint8_t	unused_0[3];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
+	uint64_t	rx_unsupported_da_pausepfc_frames;
+	/* Total number of frames received with an unsupported SA */
+	uint64_t	rx_wrong_sa_frames;
+	/* Total number of received packets with alignment error */
+	uint64_t	rx_align_err_frames;
+	/* Total number of received frames with out-of-range length */
+	uint64_t	rx_oor_len_frames;
+	/* Total number of received frames with error termination */
+	uint64_t	rx_code_err_frames;
+	/*
+	 * Total number of received frames with a false carrier is
+	 * detected during idle, as defined by RX_ER samples active
+	 * and RXD is 0xE. The event is reported along with the
+	 * statistics generated on the next received frame. Only
+	 * one false carrier condition can be detected and logged
+	 * between frames.
+	 *
+	 * Carrier event, valid for 10M/100M speed modes only.
 	 */
-	uint8_t	valid;
+	uint64_t	rx_false_carrier_frames;
+	/* Total number of over-sized frames received */
+	uint64_t	rx_ovrsz_frames;
+	/* Total number of jabber packets received */
+	uint64_t	rx_jbr_frames;
+	/* Total number of received frames with MTU error */
+	uint64_t	rx_mtu_err_frames;
+	/* Total number of received frames with CRC match */
+	uint64_t	rx_match_crc_frames;
+	/* Total number of frames received promiscuously */
+	uint64_t	rx_promiscuous_frames;
+	/*
+	 * Total number of received frames with one or two VLAN
+	 * tags
+	 */
+	uint64_t	rx_tagged_frames;
+	/* Total number of received frames with two VLAN tags */
+	uint64_t	rx_double_tagged_frames;
+	/* Total number of truncated frames received */
+	uint64_t	rx_trunc_frames;
+	/* Total number of good frames (without errors) received */
+	uint64_t	rx_good_frames;
+	/*
+	 * Total number of received PFC frames with transition from
+	 * XON to XOFF on Pri 0
+	 */
+	uint64_t	rx_pfc_xon2xoff_frames_pri0;
+	/*
+	 * Total number of received PFC frames with transition from
+	 * XON to XOFF on Pri 1
+	 */
+	uint64_t	rx_pfc_xon2xoff_frames_pri1;
+	/*
+	 * Total number of received PFC frames with transition from
+	 * XON to XOFF on Pri 2
+	 */
+	uint64_t	rx_pfc_xon2xoff_frames_pri2;
+	/*
+	 * Total number of received PFC frames with transition from
+	 * XON to XOFF on Pri 3
+	 */
+	uint64_t	rx_pfc_xon2xoff_frames_pri3;
+	/*
+	 * Total number of received PFC frames with transition from
+	 * XON to XOFF on Pri 4
+	 */
+	uint64_t	rx_pfc_xon2xoff_frames_pri4;
+	/*
+	 * Total number of received PFC frames with transition from
+	 * XON to XOFF on Pri 5
+	 */
+	uint64_t	rx_pfc_xon2xoff_frames_pri5;
+	/*
+	 * Total number of received PFC frames with transition from
+	 * XON to XOFF on Pri 6
+	 */
+	uint64_t	rx_pfc_xon2xoff_frames_pri6;
+	/*
+	 * Total number of received PFC frames with transition from
+	 * XON to XOFF on Pri 7
+	 */
+	uint64_t	rx_pfc_xon2xoff_frames_pri7;
+	/*
+	 * Total number of received PFC frames with PFC enabled
+	 * bit for Pri 0
+	 */
+	uint64_t	rx_pfc_ena_frames_pri0;
+	/*
+	 * Total number of received PFC frames with PFC enabled
+	 * bit for Pri 1
+	 */
+	uint64_t	rx_pfc_ena_frames_pri1;
+	/*
+	 * Total number of received PFC frames with PFC enabled
+	 * bit for Pri 2
+	 */
+	uint64_t	rx_pfc_ena_frames_pri2;
+	/*
+	 * Total number of received PFC frames with PFC enabled
+	 * bit for Pri 3
+	 */
+	uint64_t	rx_pfc_ena_frames_pri3;
+	/*
+	 * Total number of received PFC frames with PFC enabled
+	 * bit for Pri 4
+	 */
+	uint64_t	rx_pfc_ena_frames_pri4;
+	/*
+	 * Total number of received PFC frames with PFC enabled
+	 * bit for Pri 5
+	 */
+	uint64_t	rx_pfc_ena_frames_pri5;
+	/*
+	 * Total number of received PFC frames with PFC enabled
+	 * bit for Pri 6
+	 */
+	uint64_t	rx_pfc_ena_frames_pri6;
+	/*
+	 * Total number of received PFC frames with PFC enabled
+	 * bit for Pri 7
+	 */
+	uint64_t	rx_pfc_ena_frames_pri7;
+	/* Total Number of frames received with SCH CRC error */
+	uint64_t	rx_sch_crc_err_frames;
+	/* Total Number of under-sized frames received */
+	uint64_t	rx_undrsz_frames;
+	/* Total Number of fragmented frames received */
+	uint64_t	rx_frag_frames;
+	/* Total number of RX EEE LPI Events */
+	uint64_t	rx_eee_lpi_events;
+	/* EEE LPI Duration Counter on RX */
+	uint64_t	rx_eee_lpi_duration;
+	/*
+	 * Total number of physical type Link Level Flow Control
+	 * (LLFC) messages received
+	 */
+	uint64_t	rx_llfc_physical_msgs;
+	/*
+	 * Total number of logical type Link Level Flow Control
+	 * (LLFC) messages received
+	 */
+	uint64_t	rx_llfc_logical_msgs;
+	/*
+	 * Total number of logical type Link Level Flow Control
+	 * (LLFC) messages received with CRC error
+	 */
+	uint64_t	rx_llfc_msgs_with_crc_err;
+	/* Total number of HCFC messages received */
+	uint64_t	rx_hcfc_msgs;
+	/* Total number of HCFC messages received with CRC error */
+	uint64_t	rx_hcfc_msgs_with_crc_err;
+	/* Total number of received bytes */
+	uint64_t	rx_bytes;
+	/* Total number of bytes received in runt frames */
+	uint64_t	rx_runt_bytes;
+	/* Total number of runt frames received */
+	uint64_t	rx_runt_frames;
+	/* Total Rx Discards per Port reported by STATS block */
+	uint64_t	rx_stat_discard;
+	uint64_t	rx_stat_err;
 } __attribute__((packed));
 
-/*************************
- * hwrm_port_lpbk_qstats *
- *************************/
+/********************
+ * hwrm_port_qstats *
+ ********************/
 
 
-/* hwrm_port_lpbk_qstats_input (size:128b/16B) */
-struct hwrm_port_lpbk_qstats_input {
+/* hwrm_port_qstats_input (size:320b/40B) */
+struct hwrm_port_qstats_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -12108,10 +10241,23 @@ struct hwrm_port_lpbk_qstats_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
+	/* Port ID of port that is being queried. */
+	uint16_t	port_id;
+	uint8_t	unused_0[6];
+	/*
+	 * This is the host address where
+	 * Tx port statistics will be stored
+	 */
+	uint64_t	tx_stat_host_addr;
+	/*
+	 * This is the host address where
+	 * Rx port statistics will be stored
+	 */
+	uint64_t	rx_stat_host_addr;
 } __attribute__((packed));
 
-/* hwrm_port_lpbk_qstats_output (size:768b/96B) */
-struct hwrm_port_lpbk_qstats_output {
+/* hwrm_port_qstats_output (size:128b/16B) */
+struct hwrm_port_qstats_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -12120,27 +10266,11 @@ struct hwrm_port_lpbk_qstats_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* Number of transmitted unicast frames */
-	uint64_t	lpbk_ucast_frames;
-	/* Number of transmitted multicast frames */
-	uint64_t	lpbk_mcast_frames;
-	/* Number of transmitted broadcast frames */
-	uint64_t	lpbk_bcast_frames;
-	/* Number of transmitted bytes for unicast traffic */
-	uint64_t	lpbk_ucast_bytes;
-	/* Number of transmitted bytes for multicast traffic */
-	uint64_t	lpbk_mcast_bytes;
-	/* Number of transmitted bytes for broadcast traffic */
-	uint64_t	lpbk_bcast_bytes;
-	/* Total Tx Drops for loopback traffic reported by STATS block */
-	uint64_t	tx_stat_discard;
-	/* Total Tx Error Drops for loopback traffic reported by STATS block */
-	uint64_t	tx_stat_error;
-	/* Total Rx Drops for loopback traffic reported by STATS block */
-	uint64_t	rx_stat_discard;
-	/* Total Rx Error Drops for loopback traffic reported by STATS block */
-	uint64_t	rx_stat_error;
-	uint8_t	unused_0[7];
+	/* The size of TX port statistics block in bytes. */
+	uint16_t	tx_stat_size;
+	/* The size of RX port statistics block in bytes. */
+	uint16_t	rx_stat_size;
+	uint8_t	unused_0[3];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -12151,13 +10281,161 @@ struct hwrm_port_lpbk_qstats_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/***********************
- * hwrm_port_clr_stats *
- ***********************/
+/* Port Tx Statistics extended Formats */
+/* tx_port_stats_ext (size:2048b/256B) */
+struct tx_port_stats_ext {
+	/* Total number of tx bytes count on cos queue 0 */
+	uint64_t	tx_bytes_cos0;
+	/* Total number of tx bytes count on cos queue 1 */
+	uint64_t	tx_bytes_cos1;
+	/* Total number of tx bytes count on cos queue 2 */
+	uint64_t	tx_bytes_cos2;
+	/* Total number of tx bytes count on cos queue 3 */
+	uint64_t	tx_bytes_cos3;
+	/* Total number of tx bytes count on cos queue 4 */
+	uint64_t	tx_bytes_cos4;
+	/* Total number of tx bytes count on cos queue 5 */
+	uint64_t	tx_bytes_cos5;
+	/* Total number of tx bytes count on cos queue 6 */
+	uint64_t	tx_bytes_cos6;
+	/* Total number of tx bytes count on cos queue 7 */
+	uint64_t	tx_bytes_cos7;
+	/* Total number of tx packets count on cos queue 0 */
+	uint64_t	tx_packets_cos0;
+	/* Total number of tx packets count on cos queue 1 */
+	uint64_t	tx_packets_cos1;
+	/* Total number of tx packets count on cos queue 2 */
+	uint64_t	tx_packets_cos2;
+	/* Total number of tx packets count on cos queue 3 */
+	uint64_t	tx_packets_cos3;
+	/* Total number of tx packets count on cos queue 4 */
+	uint64_t	tx_packets_cos4;
+	/* Total number of tx packets count on cos queue 5 */
+	uint64_t	tx_packets_cos5;
+	/* Total number of tx packets count on cos queue 6 */
+	uint64_t	tx_packets_cos6;
+	/* Total number of tx packets count on cos queue 7 */
+	uint64_t	tx_packets_cos7;
+	/* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 0 */
+	uint64_t	pfc_pri0_tx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 0 */
+	uint64_t	pfc_pri0_tx_transitions;
+	/* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 1 */
+	uint64_t	pfc_pri1_tx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 1 */
+	uint64_t	pfc_pri1_tx_transitions;
+	/* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 2 */
+	uint64_t	pfc_pri2_tx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 2 */
+	uint64_t	pfc_pri2_tx_transitions;
+	/* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 3 */
+	uint64_t	pfc_pri3_tx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 3 */
+	uint64_t	pfc_pri3_tx_transitions;
+	/* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 4 */
+	uint64_t	pfc_pri4_tx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 4 */
+	uint64_t	pfc_pri4_tx_transitions;
+	/* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 5 */
+	uint64_t	pfc_pri5_tx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 5 */
+	uint64_t	pfc_pri5_tx_transitions;
+	/* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 6 */
+	uint64_t	pfc_pri6_tx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 6 */
+	uint64_t	pfc_pri6_tx_transitions;
+	/* time duration between transmitting a XON -> XOFF and a subsequent XOFF -> XON for priority 7 */
+	uint64_t	pfc_pri7_tx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 7 */
+	uint64_t	pfc_pri7_tx_transitions;
+} __attribute__((packed));
+
+/* Port Rx Statistics extended Formats */
+/* rx_port_stats_ext (size:2368b/296B) */
+struct rx_port_stats_ext {
+	/* Number of times link state changed to down */
+	uint64_t	link_down_events;
+	/* Number of times the idle rings with pause bit are found */
+	uint64_t	continuous_pause_events;
+	/* Number of times the active rings pause bit resumed back */
+	uint64_t	resume_pause_events;
+	/* Number of times, the ROCE cos queue PFC is disabled to avoid pause flood/burst */
+	uint64_t	continuous_roce_pause_events;
+	/* Number of times, the ROCE cos queue PFC is enabled back */
+	uint64_t	resume_roce_pause_events;
+	/* Total number of rx bytes count on cos queue 0 */
+	uint64_t	rx_bytes_cos0;
+	/* Total number of rx bytes count on cos queue 1 */
+	uint64_t	rx_bytes_cos1;
+	/* Total number of rx bytes count on cos queue 2 */
+	uint64_t	rx_bytes_cos2;
+	/* Total number of rx bytes count on cos queue 3 */
+	uint64_t	rx_bytes_cos3;
+	/* Total number of rx bytes count on cos queue 4 */
+	uint64_t	rx_bytes_cos4;
+	/* Total number of rx bytes count on cos queue 5 */
+	uint64_t	rx_bytes_cos5;
+	/* Total number of rx bytes count on cos queue 6 */
+	uint64_t	rx_bytes_cos6;
+	/* Total number of rx bytes count on cos queue 7 */
+	uint64_t	rx_bytes_cos7;
+	/* Total number of rx packets count on cos queue 0 */
+	uint64_t	rx_packets_cos0;
+	/* Total number of rx packets count on cos queue 1 */
+	uint64_t	rx_packets_cos1;
+	/* Total number of rx packets count on cos queue 2 */
+	uint64_t	rx_packets_cos2;
+	/* Total number of rx packets count on cos queue 3 */
+	uint64_t	rx_packets_cos3;
+	/* Total number of rx packets count on cos queue 4 */
+	uint64_t	rx_packets_cos4;
+	/* Total number of rx packets count on cos queue 5 */
+	uint64_t	rx_packets_cos5;
+	/* Total number of rx packets count on cos queue 6 */
+	uint64_t	rx_packets_cos6;
+	/* Total number of rx packets count on cos queue 7 */
+	uint64_t	rx_packets_cos7;
+	/* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 0 */
+	uint64_t	pfc_pri0_rx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 0 */
+	uint64_t	pfc_pri0_rx_transitions;
+	/* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 1 */
+	uint64_t	pfc_pri1_rx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 1 */
+	uint64_t	pfc_pri1_rx_transitions;
+	/* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 2 */
+	uint64_t	pfc_pri2_rx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 2 */
+	uint64_t	pfc_pri2_rx_transitions;
+	/* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 3 */
+	uint64_t	pfc_pri3_rx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 3 */
+	uint64_t	pfc_pri3_rx_transitions;
+	/* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 4 */
+	uint64_t	pfc_pri4_rx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 4 */
+	uint64_t	pfc_pri4_rx_transitions;
+	/* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 5 */
+	uint64_t	pfc_pri5_rx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 5 */
+	uint64_t	pfc_pri5_rx_transitions;
+	/* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 6 */
+	uint64_t	pfc_pri6_rx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 6 */
+	uint64_t	pfc_pri6_rx_transitions;
+	/* time duration receiving a XON -> XOFF and a subsequent XOFF -> XON for priority 7 */
+	uint64_t	pfc_pri7_rx_duration_us;
+	/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 7 */
+	uint64_t	pfc_pri7_rx_transitions;
+} __attribute__((packed));
+
+/************************
+ * hwrm_port_qstats_ext *
+ ************************/
 
 
-/* hwrm_port_clr_stats_input (size:192b/24B) */
-struct hwrm_port_clr_stats_input {
+/* hwrm_port_qstats_ext_input (size:320b/40B) */
+struct hwrm_port_qstats_ext_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -12187,37 +10465,69 @@ struct hwrm_port_clr_stats_input {
 	uint64_t	resp_addr;
 	/* Port ID of port that is being queried. */
 	uint16_t	port_id;
-	uint8_t	unused_0[6];
-} __attribute__((packed));
-
-/* hwrm_port_clr_stats_output (size:128b/16B) */
-struct hwrm_port_clr_stats_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
 	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
+	 * The size of TX port extended
+	 * statistics block in bytes.
+	 */
+	uint16_t	tx_stat_size;
+	/*
+	 * The size of RX port extended
+	 * statistics block in bytes
+	 */
+	uint16_t	rx_stat_size;
+	uint8_t	unused_0[2];
+	/*
+	 * This is the host address where
+	 * Tx port statistics will be stored
+	 */
+	uint64_t	tx_stat_host_addr;
+	/*
+	 * This is the host address where
+	 * Rx port statistics will be stored
+	 */
+	uint64_t	rx_stat_host_addr;
+} __attribute__((packed));
+
+/* hwrm_port_qstats_ext_output (size:128b/16B) */
+struct hwrm_port_qstats_ext_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	/* The size of TX port statistics block in bytes. */
+	uint16_t	tx_stat_size;
+	/* The size of RX port statistics block in bytes. */
+	uint16_t	rx_stat_size;
+	/* Total number of active cos queues available. */
+	uint16_t	total_active_cos_queues;
+	uint8_t	flags;
+	/*
+	 * If set to 1, then this field indicates that clear
+	 * roce specific counters is supported.
+	 */
+	#define HWRM_PORT_QSTATS_EXT_OUTPUT_FLAGS_CLEAR_ROCE_COUNTERS_SUPPORTED \
+		UINT32_C(0x1)
+	/*
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
 	 * the order of writes has to be such that this field is written last.
 	 */
 	uint8_t	valid;
 } __attribute__((packed));
 
-/****************************
- * hwrm_port_lpbk_clr_stats *
- ****************************/
+/*************************
+ * hwrm_port_lpbk_qstats *
+ *************************/
 
 
-/* hwrm_port_lpbk_clr_stats_input (size:128b/16B) */
-struct hwrm_port_lpbk_clr_stats_input {
+/* hwrm_port_lpbk_qstats_input (size:128b/16B) */
+struct hwrm_port_lpbk_qstats_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -12247,8 +10557,8 @@ struct hwrm_port_lpbk_clr_stats_input {
 	uint64_t	resp_addr;
 } __attribute__((packed));
 
-/* hwrm_port_lpbk_clr_stats_output (size:128b/16B) */
-struct hwrm_port_lpbk_clr_stats_output {
+/* hwrm_port_lpbk_qstats_output (size:768b/96B) */
+struct hwrm_port_lpbk_qstats_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -12257,6 +10567,26 @@ struct hwrm_port_lpbk_clr_stats_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
+	/* Number of transmitted unicast frames */
+	uint64_t	lpbk_ucast_frames;
+	/* Number of transmitted multicast frames */
+	uint64_t	lpbk_mcast_frames;
+	/* Number of transmitted broadcast frames */
+	uint64_t	lpbk_bcast_frames;
+	/* Number of transmitted bytes for unicast traffic */
+	uint64_t	lpbk_ucast_bytes;
+	/* Number of transmitted bytes for multicast traffic */
+	uint64_t	lpbk_mcast_bytes;
+	/* Number of transmitted bytes for broadcast traffic */
+	uint64_t	lpbk_bcast_bytes;
+	/* Total Tx Drops for loopback traffic reported by STATS block */
+	uint64_t	tx_stat_discard;
+	/* Total Tx Error Drops for loopback traffic reported by STATS block */
+	uint64_t	tx_stat_error;
+	/* Total Rx Drops for loopback traffic reported by STATS block */
+	uint64_t	rx_stat_discard;
+	/* Total Rx Error Drops for loopback traffic reported by STATS block */
+	uint64_t	rx_stat_error;
 	uint8_t	unused_0[7];
 	/*
 	 * This field is used in Output records to indicate that the output
@@ -12268,13 +10598,13 @@ struct hwrm_port_lpbk_clr_stats_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/**********************
- * hwrm_port_ts_query *
- **********************/
+/***********************
+ * hwrm_port_clr_stats *
+ ***********************/
 
 
-/* hwrm_port_ts_query_input (size:192b/24B) */
-struct hwrm_port_ts_query_input {
+/* hwrm_port_clr_stats_input (size:192b/24B) */
+struct hwrm_port_clr_stats_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -12302,26 +10632,24 @@ struct hwrm_port_ts_query_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	uint32_t	flags;
-	/*
-	 * Enumeration denoting the RX, TX type of the resource.
-	 * This enumeration is used for resources that are similar for both
-	 * TX and RX paths of the chip.
-	 */
-	#define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH     UINT32_C(0x1)
-	/* tx path */
-	#define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_TX    UINT32_C(0x0)
-	/* rx path */
-	#define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_RX    UINT32_C(0x1)
-	#define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_LAST \
-		HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_RX
 	/* Port ID of port that is being queried. */
 	uint16_t	port_id;
-	uint8_t	unused_0[2];
+	uint8_t	flags;
+	/*
+	 * If set to 1, then this field indicates clear the following RoCE
+	 * specific counters.
+	 * RoCE associated TX/RX cos counters
+	 * CNP associated TX/RX cos counters
+	 * RoCE/CNP specific TX/RX flow counters
+	 * Firmware will determine the RoCE/CNP cos queue based on qos profile.
+	 * This flag is honored only when RoCE is enabled on that port.
+	 */
+	#define HWRM_PORT_CLR_STATS_INPUT_FLAGS_ROCE_COUNTERS     UINT32_C(0x1)
+	uint8_t	unused_0[5];
 } __attribute__((packed));
 
-/* hwrm_port_ts_query_output (size:192b/24B) */
-struct hwrm_port_ts_query_output {
+/* hwrm_port_clr_stats_output (size:128b/16B) */
+struct hwrm_port_clr_stats_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -12330,11 +10658,7 @@ struct hwrm_port_ts_query_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* Timestamp value of PTP message captured. */
-	uint64_t	ptp_msg_ts;
-	/* Sequence ID of the PTP message captured. */
-	uint16_t	ptp_msg_seqid;
-	uint8_t	unused_0[5];
+	uint8_t	unused_0[7];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -12593,172 +10917,6 @@ struct hwrm_port_phy_qcaps_output {
 	#define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_SFT             24
 } __attribute__((packed));
 
-/***************************
- * hwrm_port_phy_i2c_write *
- ***************************/
-
-
-/* hwrm_port_phy_i2c_write_input (size:832b/104B) */
-struct hwrm_port_phy_i2c_write_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	flags;
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the page_offset field to be
-	 * configured.
-	 */
-	#define HWRM_PORT_PHY_I2C_WRITE_INPUT_ENABLES_PAGE_OFFSET \
-		UINT32_C(0x1)
-	/* Port ID of port. */
-	uint16_t	port_id;
-	/* 8-bit I2C slave address. */
-	uint8_t	i2c_slave_addr;
-	uint8_t	unused_0;
-	/* The page number that is being accessed over I2C. */
-	uint16_t	page_number;
-	/* Offset within the page that is being accessed over I2C. */
-	uint16_t	page_offset;
-	/*
-	 * Length of data to write, in bytes starting at the offset
-	 * specified above. If the offset is not specified, then
-	 * the data shall be written from the beginning of the page.
-	 */
-	uint8_t	data_length;
-	uint8_t	unused_1[7];
-	/* Up to 64B of data. */
-	uint32_t	data[16];
-} __attribute__((packed));
-
-/* hwrm_port_phy_i2c_write_output (size:128b/16B) */
-struct hwrm_port_phy_i2c_write_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**************************
- * hwrm_port_phy_i2c_read *
- **************************/
-
-
-/* hwrm_port_phy_i2c_read_input (size:320b/40B) */
-struct hwrm_port_phy_i2c_read_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	flags;
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the page_offset field to be
-	 * configured.
-	 */
-	#define HWRM_PORT_PHY_I2C_READ_INPUT_ENABLES_PAGE_OFFSET \
-		UINT32_C(0x1)
-	/* Port ID of port. */
-	uint16_t	port_id;
-	/* 8-bit I2C slave address. */
-	uint8_t	i2c_slave_addr;
-	uint8_t	unused_0;
-	/* The page number that is being accessed over I2C. */
-	uint16_t	page_number;
-	/* Offset within the page that is being accessed over I2C. */
-	uint16_t	page_offset;
-	/*
-	 * Length of data to read, in bytes starting at the offset
-	 * specified above. If the offset is not specified, then
-	 * the data shall be read from the beginning of the page.
-	 */
-	uint8_t	data_length;
-	uint8_t	unused_1[7];
-} __attribute__((packed));
-
-/* hwrm_port_phy_i2c_read_output (size:640b/80B) */
-struct hwrm_port_phy_i2c_read_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* Up to 64B of data. */
-	uint32_t	data[16];
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
 /*********************
  * hwrm_port_led_cfg *
  *********************/
@@ -17077,4572 +15235,37 @@ struct hwrm_queue_cos2bw_cfg_input {
 		(UINT32_C(0x7) << 29)
 	#define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_LAST \
 		HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID
-	/* Transmission Selection Algorithm (TSA) for CoS Queue. */
-	uint8_t	queue_id7_tsa_assign;
-	/* Strict Priority */
-	#define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_SP \
-		UINT32_C(0x0)
-	/* Enhanced Transmission Selection */
-	#define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_ETS \
-		UINT32_C(0x1)
-	/* reserved. */
-	#define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST \
-		UINT32_C(0x2)
-	/* reserved. */
-	#define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST \
-		UINT32_C(0xff)
-	/*
-	 * Priority level for strict priority. Valid only when the
-	 * tsa_assign is 0 - Strict Priority (SP)
-	 * 0..7 - Valid values.
-	 * 8..255 - Reserved.
-	 */
-	uint8_t	queue_id7_pri_lvl;
-	/*
-	 * Weight used to allocate remaining BW for this COS after
-	 * servicing guaranteed bandwidths for all COS.
-	 */
-	uint8_t	queue_id7_bw_weight;
-	uint8_t	unused_1[5];
-} __attribute__((packed));
-
-/* hwrm_queue_cos2bw_cfg_output (size:128b/16B) */
-struct hwrm_queue_cos2bw_cfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/*************************
- * hwrm_queue_dscp_qcaps *
- *************************/
-
-
-/* hwrm_queue_dscp_qcaps_input (size:192b/24B) */
-struct hwrm_queue_dscp_qcaps_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/*
-	 * Port ID of port for which the table is being configured.
-	 * The HWRM needs to check whether this function is allowed
-	 * to configure pri2cos mapping on this port.
-	 */
-	uint8_t	port_id;
-	uint8_t	unused_0[7];
-} __attribute__((packed));
-
-/* hwrm_queue_dscp_qcaps_output (size:128b/16B) */
-struct hwrm_queue_dscp_qcaps_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* The number of bits provided by the hardware for the DSCP value. */
-	uint8_t	num_dscp_bits;
-	uint8_t	unused_0;
-	/* Max number of DSCP-MASK-PRI entries supported. */
-	uint16_t	max_entries;
-	uint8_t	unused_1[3];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/****************************
- * hwrm_queue_dscp2pri_qcfg *
- ****************************/
-
-
-/* hwrm_queue_dscp2pri_qcfg_input (size:256b/32B) */
-struct hwrm_queue_dscp2pri_qcfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/*
-	 * This is the host address where the 24-bits DSCP-MASK-PRI
-	 * tuple(s) will be copied to.
-	 */
-	uint64_t	dest_data_addr;
-	/*
-	 * Port ID of port for which the table is being configured.
-	 * The HWRM needs to check whether this function is allowed
-	 * to configure pri2cos mapping on this port.
-	 */
-	uint8_t	port_id;
-	uint8_t	unused_0;
-	/* Size of the buffer pointed to by dest_data_addr. */
-	uint16_t	dest_data_buffer_size;
-	uint8_t	unused_1[4];
-} __attribute__((packed));
-
-/* hwrm_queue_dscp2pri_qcfg_output (size:128b/16B) */
-struct hwrm_queue_dscp2pri_qcfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/*
-	 * A count of the number of DSCP-MASK-PRI tuple(s) pointed to
-	 * by the dest_data_addr.
-	 */
-	uint16_t	entry_cnt;
-	/*
-	 * This is the default PRI which un-initialized DSCP values are
-	 * mapped to.
-	 */
-	uint8_t	default_pri;
-	uint8_t	unused_0[4];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/***************************
- * hwrm_queue_dscp2pri_cfg *
- ***************************/
-
-
-/* hwrm_queue_dscp2pri_cfg_input (size:320b/40B) */
-struct hwrm_queue_dscp2pri_cfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/*
-	 * This is the host address where the 24-bits DSCP-MASK-PRI tuple
-	 * will be copied from.
-	 */
-	uint64_t	src_data_addr;
-	uint32_t	flags;
-	/* use_hw_default_pri is 1 b */
-	#define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_FLAGS_USE_HW_DEFAULT_PRI \
-		UINT32_C(0x1)
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the default_pri field to be
-	 * configured.
-	 */
-	#define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_ENABLES_DEFAULT_PRI \
-		UINT32_C(0x1)
-	/*
-	 * Port ID of port for which the table is being configured.
-	 * The HWRM needs to check whether this function is allowed
-	 * to configure pri2cos mapping on this port.
-	 */
-	uint8_t	port_id;
-	/*
-	 * This is the default PRI which un-initialized DSCP values will be
-	 * mapped to.
-	 */
-	uint8_t	default_pri;
-	/*
-	 * A count of the number of DSCP-MASK-PRI tuple(s) in the data pointed
-	 * to by src_data_addr.
-	 */
-	uint16_t	entry_cnt;
-	uint8_t	unused_0[4];
-} __attribute__((packed));
-
-/* hwrm_queue_dscp2pri_cfg_output (size:128b/16B) */
-struct hwrm_queue_dscp2pri_cfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/*******************
- * hwrm_vnic_alloc *
- *******************/
-
-
-/* hwrm_vnic_alloc_input (size:192b/24B) */
-struct hwrm_vnic_alloc_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	flags;
-	/*
-	 * When this bit is '1', this VNIC is requested to
-	 * be the default VNIC for this function.
-	 */
-	#define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT     UINT32_C(0x1)
-	uint8_t	unused_0[4];
-} __attribute__((packed));
-
-/* hwrm_vnic_alloc_output (size:128b/16B) */
-struct hwrm_vnic_alloc_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* Logical vnic ID */
-	uint32_t	vnic_id;
-	uint8_t	unused_0[3];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/******************
- * hwrm_vnic_free *
- ******************/
-
-
-/* hwrm_vnic_free_input (size:192b/24B) */
-struct hwrm_vnic_free_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* Logical vnic ID */
-	uint32_t	vnic_id;
-	uint8_t	unused_0[4];
-} __attribute__((packed));
-
-/* hwrm_vnic_free_output (size:128b/16B) */
-struct hwrm_vnic_free_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/*****************
- * hwrm_vnic_cfg *
- *****************/
-
-
-/* hwrm_vnic_cfg_input (size:320b/40B) */
-struct hwrm_vnic_cfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	flags;
-	/*
-	 * When this bit is '1', the VNIC is requested to
-	 * be the default VNIC for the function.
-	 */
-	#define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT \
-		UINT32_C(0x1)
-	/*
-	 * When this bit is '1', the VNIC is being configured to
-	 * strip VLAN in the RX path.
-	 * If set to '0', then VLAN stripping is disabled on
-	 * this VNIC.
-	 */
-	#define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE \
-		UINT32_C(0x2)
-	/*
-	 * When this bit is '1', the VNIC is being configured to
-	 * buffer receive packets in the hardware until the host
-	 * posts new receive buffers.
-	 * If set to '0', then bd_stall is being configured to be
-	 * disabled on this VNIC.
-	 */
-	#define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE \
-		UINT32_C(0x4)
-	/*
-	 * When this bit is '1', the VNIC is being configured to
-	 * receive both RoCE and non-RoCE traffic.
-	 * If set to '0', then this VNIC is not configured to be
-	 * operating in dual VNIC mode.
-	 */
-	#define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE \
-		UINT32_C(0x8)
-	/*
-	 * When this flag is set to '1', the VNIC is requested to
-	 * be configured to receive only RoCE traffic.
-	 * If this flag is set to '0', then this flag shall be
-	 * ignored by the HWRM.
-	 * If roce_dual_vnic_mode flag is set to '1'
-	 * or roce_mirroring_capable_vnic_mode flag to 1,
-	 * then the HWRM client shall not set this flag to '1'.
-	 */
-	#define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE \
-		UINT32_C(0x10)
-	/*
-	 * When a VNIC uses one destination ring group for certain
-	 * application (e.g. Receive Flow Steering) where
-	 * exact match is used to direct packets to a VNIC with one
-	 * destination ring group only, there is no need to configure
-	 * RSS indirection table for that VNIC as only one destination
-	 * ring group is used.
-	 *
-	 * This flag is used to enable a mode where
-	 * RSS is enabled in the VNIC using a RSS context
-	 * for computing RSS hash but the RSS indirection table is
-	 * not configured using hwrm_vnic_rss_cfg.
-	 *
-	 * If this mode is enabled, then the driver should not program
-	 * RSS indirection table for the RSS context that is used for
-	 * computing RSS hash only.
-	 */
-	#define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE \
-		UINT32_C(0x20)
-	/*
-	 * When this bit is '1', the VNIC is being configured to
-	 * receive both RoCE and non-RoCE traffic, but forward only the
-	 * RoCE traffic further. Also, RoCE traffic can be mirrored to
-	 * L2 driver.
-	 */
-	#define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
-		UINT32_C(0x40)
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the dflt_ring_grp field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP \
-		UINT32_C(0x1)
-	/*
-	 * This bit must be '1' for the rss_rule field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE \
-		UINT32_C(0x2)
-	/*
-	 * This bit must be '1' for the cos_rule field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE \
-		UINT32_C(0x4)
-	/*
-	 * This bit must be '1' for the lb_rule field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE \
-		UINT32_C(0x8)
-	/*
-	 * This bit must be '1' for the mru field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_CFG_INPUT_ENABLES_MRU \
-		UINT32_C(0x10)
-	/*
-	 * This bit must be '1' for the default_rx_ring_id field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_RX_RING_ID \
-		UINT32_C(0x20)
-	/*
-	 * This bit must be '1' for the default_cmpl_ring_id field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_CMPL_RING_ID \
-		UINT32_C(0x40)
-	/* Logical vnic ID */
-	uint16_t	vnic_id;
-	/*
-	 * Default Completion ring for the VNIC.  This ring will
-	 * be chosen if packet does not match any RSS rules and if
-	 * there is no COS rule.
-	 */
-	uint16_t	dflt_ring_grp;
-	/*
-	 * RSS ID for RSS rule/table structure.  0xFF... (All Fs) if
-	 * there is no RSS rule.
-	 */
-	uint16_t	rss_rule;
-	/*
-	 * RSS ID for COS rule/table structure.  0xFF... (All Fs) if
-	 * there is no COS rule.
-	 */
-	uint16_t	cos_rule;
-	/*
-	 * RSS ID for load balancing rule/table structure.
-	 * 0xFF... (All Fs) if there is no LB rule.
-	 */
-	uint16_t	lb_rule;
-	/*
-	 * The maximum receive unit of the vnic.
-	 * Each vnic is associated with a function.
-	 * The vnic mru value overwrites the mru setting of the
-	 * associated function.
-	 * The HWRM shall make sure that vnic mru does not exceed
-	 * the mru of the port the function is associated with.
-	 */
-	uint16_t	mru;
-	/*
-	 * Default Rx ring for the VNIC.  This ring will
-	 * be chosen if packet does not match any RSS rules.
-	 * The aggregation ring associated with the Rx ring is
-	 * implied based on the Rx ring specified when the
-	 * aggregation ring was allocated.
-	 */
-	uint16_t	default_rx_ring_id;
-	/*
-	 * Default completion ring for the VNIC.  This ring will
-	 * be chosen if packet does not match any RSS rules.
-	 */
-	uint16_t	default_cmpl_ring_id;
-} __attribute__((packed));
-
-/* hwrm_vnic_cfg_output (size:128b/16B) */
-struct hwrm_vnic_cfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/******************
- * hwrm_vnic_qcfg *
- ******************/
-
-
-/* hwrm_vnic_qcfg_input (size:256b/32B) */
-struct hwrm_vnic_qcfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the vf_id_valid field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID     UINT32_C(0x1)
-	/* Logical vnic ID */
-	uint32_t	vnic_id;
-	/* ID of Virtual Function whose VNIC resource is being queried. */
-	uint16_t	vf_id;
-	uint8_t	unused_0[6];
-} __attribute__((packed));
-
-/* hwrm_vnic_qcfg_output (size:256b/32B) */
-struct hwrm_vnic_qcfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* Default Completion ring for the VNIC. */
-	uint16_t	dflt_ring_grp;
-	/*
-	 * RSS ID for RSS rule/table structure.  0xFF... (All Fs) if
-	 * there is no RSS rule.
-	 */
-	uint16_t	rss_rule;
-	/*
-	 * RSS ID for COS rule/table structure.  0xFF... (All Fs) if
-	 * there is no COS rule.
-	 */
-	uint16_t	cos_rule;
-	/*
-	 * RSS ID for load balancing rule/table structure.
-	 * 0xFF... (All Fs) if there is no LB rule.
-	 */
-	uint16_t	lb_rule;
-	/* The maximum receive unit of the vnic. */
-	uint16_t	mru;
-	uint8_t	unused_0[2];
-	uint32_t	flags;
-	/*
-	 * When this bit is '1', the VNIC is the default VNIC for
-	 * the function.
-	 */
-	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT \
-		UINT32_C(0x1)
-	/*
-	 * When this bit is '1', the VNIC is configured to
-	 * strip VLAN in the RX path.
-	 * If set to '0', then VLAN stripping is disabled on
-	 * this VNIC.
-	 */
-	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE \
-		UINT32_C(0x2)
-	/*
-	 * When this bit is '1', the VNIC is configured to
-	 * buffer receive packets in the hardware until the host
-	 * posts new receive buffers.
-	 * If set to '0', then bd_stall is disabled on
-	 * this VNIC.
-	 */
-	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE \
-		UINT32_C(0x4)
-	/*
-	 * When this bit is '1', the VNIC is configured to
-	 * receive both RoCE and non-RoCE traffic.
-	 * If set to '0', then this VNIC is not configured to
-	 * operate in dual VNIC mode.
-	 */
-	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE \
-		UINT32_C(0x8)
-	/*
-	 * When this flag is set to '1', the VNIC is configured to
-	 * receive only RoCE traffic.
-	 * When this flag is set to '0', the VNIC is not configured
-	 * to receive only RoCE traffic.
-	 * If roce_dual_vnic_mode flag and this flag both are set
-	 * to '1', then it is an invalid configuration of the
-	 * VNIC. The HWRM should not allow that type of
-	 * mis-configuration by HWRM clients.
-	 */
-	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE \
-		UINT32_C(0x10)
-	/*
-	 * When a VNIC uses one destination ring group for certain
-	 * application (e.g. Receive Flow Steering) where
-	 * exact match is used to direct packets to a VNIC with one
-	 * destination ring group only, there is no need to configure
-	 * RSS indirection table for that VNIC as only one destination
-	 * ring group is used.
-	 *
-	 * When this bit is set to '1', then the VNIC is enabled in a
-	 * mode where RSS is enabled in the VNIC using a RSS context
-	 * for computing RSS hash but the RSS indirection table is
-	 * not configured.
-	 */
-	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE \
-		UINT32_C(0x20)
-	/*
-	 * When this bit is '1', the VNIC is configured to
-	 * receive both RoCE and non-RoCE traffic, but forward only
-	 * RoCE traffic further. Also RoCE traffic can be mirrored to
-	 * L2 driver.
-	 */
-	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
-		UINT32_C(0x40)
-	uint8_t	unused_1[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/*******************
- * hwrm_vnic_qcaps *
- *******************/
-
-
-/* hwrm_vnic_qcaps_input (size:192b/24B) */
-struct hwrm_vnic_qcaps_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	enables;
-	uint8_t	unused_0[4];
-} __attribute__((packed));
-
-/* hwrm_vnic_qcaps_output (size:192b/24B) */
-struct hwrm_vnic_qcaps_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* The maximum receive unit that is settable on a vnic. */
-	uint16_t	mru;
-	uint8_t	unused_0[2];
-	uint32_t	flags;
-	/* Unused. */
-	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_UNUSED \
-		UINT32_C(0x1)
-	/*
-	 * When this bit is '1', the capability of stripping VLAN in
-	 * the RX path is supported on VNIC(s).
-	 * If set to '0', then VLAN stripping capability is
-	 * not supported on VNIC(s).
-	 */
-	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_VLAN_STRIP_CAP \
-		UINT32_C(0x2)
-	/*
-	 * When this bit is '1', the capability to buffer receive
-	 * packets in the hardware until the host posts new receive buffers
-	 * is supported on VNIC(s).
-	 * If set to '0', then bd_stall capability is not supported
-	 * on VNIC(s).
-	 */
-	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_BD_STALL_CAP \
-		UINT32_C(0x4)
-	/*
-	 * When this bit is '1', the capability to
-	 * receive both RoCE and non-RoCE traffic on VNIC(s) is
-	 * supported.
-	 * If set to '0', then the capability to receive
-	 * both RoCE and non-RoCE traffic on VNIC(s) is
-	 * not supported.
-	 */
-	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_DUAL_VNIC_CAP \
-		UINT32_C(0x8)
-	/*
-	 * When this bit is set to '1', the capability to configure
-	 * a VNIC to receive only RoCE traffic is supported.
-	 * When this flag is set to '0', the VNIC capability to
-	 * configure to receive only RoCE traffic is not supported.
-	 */
-	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_ONLY_VNIC_CAP \
-		UINT32_C(0x10)
-	/*
-	 * When this bit is set to '1', then the capability to enable
-	 * a VNIC in a mode where RSS context without configuring
-	 * RSS indirection table is supported (for RSS hash computation).
-	 * When this bit is set to '0', then a VNIC can not be configured
-	 * with a mode to enable RSS context without configuring RSS
-	 * indirection table.
-	 */
-	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_RSS_DFLT_CR_CAP \
-		UINT32_C(0x20)
-	/*
-	 * When this bit is '1', the capability to
-	 * mirror the the RoCE traffic is supported.
-	 * If set to '0', then the capability to mirror the
-	 * RoCE traffic is not supported.
-	 */
-	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_CAP \
-		UINT32_C(0x40)
-	/*
-	 * When this bit is '1', the outermost RSS hashing capability
-	 * is supported. If set to '0', then the outermost RSS hashing
-	 * capability is not supported.
-	 */
-	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_OUTERMOST_RSS_CAP \
-		UINT32_C(0x80)
-	uint8_t	unused_1[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/*********************
- * hwrm_vnic_tpa_cfg *
- *********************/
-
-
-/* hwrm_vnic_tpa_cfg_input (size:320b/40B) */
-struct hwrm_vnic_tpa_cfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	flags;
-	/*
-	 * When this bit is '1', the VNIC shall be configured to
-	 * perform transparent packet aggregation (TPA) of
-	 * non-tunneled TCP packets.
-	 */
-	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA \
-		UINT32_C(0x1)
-	/*
-	 * When this bit is '1', the VNIC shall be configured to
-	 * perform transparent packet aggregation (TPA) of
-	 * tunneled TCP packets.
-	 */
-	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA \
-		UINT32_C(0x2)
-	/*
-	 * When this bit is '1', the VNIC shall be configured to
-	 * perform transparent packet aggregation (TPA) according
-	 * to Windows Receive Segment Coalescing (RSC) rules.
-	 */
-	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE \
-		UINT32_C(0x4)
-	/*
-	 * When this bit is '1', the VNIC shall be configured to
-	 * perform transparent packet aggregation (TPA) according
-	 * to Linux Generic Receive Offload (GRO) rules.
-	 */
-	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO \
-		UINT32_C(0x8)
-	/*
-	 * When this bit is '1', the VNIC shall be configured to
-	 * perform transparent packet aggregation (TPA) for TCP
-	 * packets with IP ECN set to non-zero.
-	 */
-	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN \
-		UINT32_C(0x10)
-	/*
-	 * When this bit is '1', the VNIC shall be configured to
-	 * perform transparent packet aggregation (TPA) for
-	 * GRE tunneled TCP packets only if all packets have the
-	 * same GRE sequence.
-	 */
-	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \
-		UINT32_C(0x20)
-	/*
-	 * When this bit is '1' and the GRO mode is enabled,
-	 * the VNIC shall be configured to
-	 * perform transparent packet aggregation (TPA) for
-	 * TCP/IPv4 packets with consecutively increasing IPIDs.
-	 * In other words, the last packet that is being
-	 * aggregated to an already existing aggregation context
-	 * shall have IPID 1 more than the IPID of the last packet
-	 * that was aggregated in that aggregation context.
-	 */
-	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK \
-		UINT32_C(0x40)
-	/*
-	 * When this bit is '1' and the GRO mode is enabled,
-	 * the VNIC shall be configured to
-	 * perform transparent packet aggregation (TPA) for
-	 * TCP packets with the same TTL (IPv4) or Hop limit (IPv6)
-	 * value.
-	 */
-	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK \
-		UINT32_C(0x80)
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the max_agg_segs field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS      UINT32_C(0x1)
-	/*
-	 * This bit must be '1' for the max_aggs field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS          UINT32_C(0x2)
-	/*
-	 * This bit must be '1' for the max_agg_timer field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER     UINT32_C(0x4)
-	/*
-	 * This bit must be '1' for the min_agg_len field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN       UINT32_C(0x8)
-	/* Logical vnic ID */
-	uint16_t	vnic_id;
-	/*
-	 * This is the maximum number of TCP segments that can
-	 * be aggregated (unit is Log2). Max value is 31.
-	 */
-	uint16_t	max_agg_segs;
-	/* 1 segment */
-	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1   UINT32_C(0x0)
-	/* 2 segments */
-	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2   UINT32_C(0x1)
-	/* 4 segments */
-	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4   UINT32_C(0x2)
-	/* 8 segments */
-	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8   UINT32_C(0x3)
-	/* Any segment size larger than this is not valid */
-	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f)
-	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_LAST \
-		HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX
-	/*
-	 * This is the maximum number of aggregations this VNIC is
-	 * allowed (unit is Log2). Max value is 7
-	 */
-	uint16_t	max_aggs;
-	/* 1 aggregation */
-	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1   UINT32_C(0x0)
-	/* 2 aggregations */
-	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2   UINT32_C(0x1)
-	/* 4 aggregations */
-	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4   UINT32_C(0x2)
-	/* 8 aggregations */
-	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8   UINT32_C(0x3)
-	/* 16 aggregations */
-	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16  UINT32_C(0x4)
-	/* Any aggregation size larger than this is not valid */
-	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7)
-	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_LAST \
-		HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX
-	uint8_t	unused_0[2];
-	/*
-	 * This is the maximum amount of time allowed for
-	 * an aggregation context to complete after it was initiated.
-	 */
-	uint32_t	max_agg_timer;
-	/*
-	 * This is the minimum amount of payload length required to
-	 * start an aggregation context.
-	 */
-	uint32_t	min_agg_len;
-} __attribute__((packed));
-
-/* hwrm_vnic_tpa_cfg_output (size:128b/16B) */
-struct hwrm_vnic_tpa_cfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**********************
- * hwrm_vnic_tpa_qcfg *
- **********************/
-
-
-/* hwrm_vnic_tpa_qcfg_input (size:192b/24B) */
-struct hwrm_vnic_tpa_qcfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* Logical vnic ID */
-	uint16_t	vnic_id;
-	uint8_t	unused_0[6];
-} __attribute__((packed));
-
-/* hwrm_vnic_tpa_qcfg_output (size:256b/32B) */
-struct hwrm_vnic_tpa_qcfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint32_t	flags;
-	/*
-	 * When this bit is '1', the VNIC is configured to
-	 * perform transparent packet aggregation (TPA) of
-	 * non-tunneled TCP packets.
-	 */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_TPA \
-		UINT32_C(0x1)
-	/*
-	 * When this bit is '1', the VNIC is configured to
-	 * perform transparent packet aggregation (TPA) of
-	 * tunneled TCP packets.
-	 */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_ENCAP_TPA \
-		UINT32_C(0x2)
-	/*
-	 * When this bit is '1', the VNIC is configured to
-	 * perform transparent packet aggregation (TPA) according
-	 * to Windows Receive Segment Coalescing (RSC) rules.
-	 */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_RSC_WND_UPDATE \
-		UINT32_C(0x4)
-	/*
-	 * When this bit is '1', the VNIC is configured to
-	 * perform transparent packet aggregation (TPA) according
-	 * to Linux Generic Receive Offload (GRO) rules.
-	 */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_GRO \
-		UINT32_C(0x8)
-	/*
-	 * When this bit is '1', the VNIC is configured to
-	 * perform transparent packet aggregation (TPA) for TCP
-	 * packets with IP ECN set to non-zero.
-	 */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_AGG_WITH_ECN \
-		UINT32_C(0x10)
-	/*
-	 * When this bit is '1', the VNIC is configured to
-	 * perform transparent packet aggregation (TPA) for
-	 * GRE tunneled TCP packets only if all packets have the
-	 * same GRE sequence.
-	 */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \
-		UINT32_C(0x20)
-	/*
-	 * When this bit is '1' and the GRO mode is enabled,
-	 * the VNIC is configured to
-	 * perform transparent packet aggregation (TPA) for
-	 * TCP/IPv4 packets with consecutively increasing IPIDs.
-	 * In other words, the last packet that is being
-	 * aggregated to an already existing aggregation context
-	 * shall have IPID 1 more than the IPID of the last packet
-	 * that was aggregated in that aggregation context.
-	 */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_GRO_IPID_CHECK \
-		UINT32_C(0x40)
-	/*
-	 * When this bit is '1' and the GRO mode is enabled,
-	 * the VNIC is configured to
-	 * perform transparent packet aggregation (TPA) for
-	 * TCP packets with the same TTL (IPv4) or Hop limit (IPv6)
-	 * value.
-	 */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_GRO_TTL_CHECK \
-		UINT32_C(0x80)
-	/*
-	 * This is the maximum number of TCP segments that can
-	 * be aggregated (unit is Log2). Max value is 31.
-	 */
-	uint16_t	max_agg_segs;
-	/* 1 segment */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_1   UINT32_C(0x0)
-	/* 2 segments */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_2   UINT32_C(0x1)
-	/* 4 segments */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_4   UINT32_C(0x2)
-	/* 8 segments */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_8   UINT32_C(0x3)
-	/* Any segment size larger than this is not valid */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f)
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_LAST \
-		HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_MAX
-	/*
-	 * This is the maximum number of aggregations this VNIC is
-	 * allowed (unit is Log2). Max value is 7
-	 */
-	uint16_t	max_aggs;
-	/* 1 aggregation */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_1   UINT32_C(0x0)
-	/* 2 aggregations */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_2   UINT32_C(0x1)
-	/* 4 aggregations */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_4   UINT32_C(0x2)
-	/* 8 aggregations */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_8   UINT32_C(0x3)
-	/* 16 aggregations */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_16  UINT32_C(0x4)
-	/* Any aggregation size larger than this is not valid */
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_MAX UINT32_C(0x7)
-	#define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_LAST \
-		HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_MAX
-	/*
-	 * This is the maximum amount of time allowed for
-	 * an aggregation context to complete after it was initiated.
-	 */
-	uint32_t	max_agg_timer;
-	/*
-	 * This is the minimum amount of payload length required to
-	 * start an aggregation context.
-	 */
-	uint32_t	min_agg_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/*********************
- * hwrm_vnic_rss_cfg *
- *********************/
-
-
-/* hwrm_vnic_rss_cfg_input (size:384b/48B) */
-struct hwrm_vnic_rss_cfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	hash_type;
-	/*
-	 * When this bit is '1', the RSS hash shall be computed
-	 * over source and destination IPv4 addresses of IPv4
-	 * packets.
-	 */
-	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4         UINT32_C(0x1)
-	/*
-	 * When this bit is '1', the RSS hash shall be computed
-	 * over source/destination IPv4 addresses and
-	 * source/destination ports of TCP/IPv4 packets.
-	 */
-	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4     UINT32_C(0x2)
-	/*
-	 * When this bit is '1', the RSS hash shall be computed
-	 * over source/destination IPv4 addresses and
-	 * source/destination ports of UDP/IPv4 packets.
-	 */
-	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4     UINT32_C(0x4)
-	/*
-	 * When this bit is '1', the RSS hash shall be computed
-	 * over source and destination IPv4 addresses of IPv6
-	 * packets.
-	 */
-	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6         UINT32_C(0x8)
-	/*
-	 * When this bit is '1', the RSS hash shall be computed
-	 * over source/destination IPv6 addresses and
-	 * source/destination ports of TCP/IPv6 packets.
-	 */
-	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6     UINT32_C(0x10)
-	/*
-	 * When this bit is '1', the RSS hash shall be computed
-	 * over source/destination IPv6 addresses and
-	 * source/destination ports of UDP/IPv6 packets.
-	 */
-	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6     UINT32_C(0x20)
-	/* VNIC ID of VNIC associated with RSS table being configured. */
-	uint16_t	vnic_id;
-	/*
-	 * Specifies which VNIC ring table pair to configure.
-	 * Valid values range from 0 to 7.
-	 */
-	uint8_t	ring_table_pair_index;
-	/* Flags to specify different RSS hash modes. */
-	uint8_t	hash_mode_flags;
-	/*
-	 * When this bit is '1', it indicates using current RSS
-	 * hash mode setting configured in the device.
-	 */
-	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_DEFAULT \
-		UINT32_C(0x1)
-	/*
-	 * When this bit is '1', it indicates requesting support of
-	 * RSS hashing over innermost 4 tuples {l3.src, l3.dest,
-	 * l4.src, l4.dest} for tunnel packets. For none-tunnel
-	 * packets, the RSS hash is computed over the normal
-	 * src/dest l3 and src/dest l4 headers.
-	 */
-	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_4 \
-		UINT32_C(0x2)
-	/*
-	 * When this bit is '1', it indicates requesting support of
-	 * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for
-	 * tunnel packets. For none-tunnel packets, the RSS hash is
-	 * computed over the normal src/dest l3 headers.
-	 */
-	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_2 \
-		UINT32_C(0x4)
-	/*
-	 * When this bit is '1', it indicates requesting support of
-	 * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest,
-	 * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel
-	 * packets, the RSS hash is computed over the normal
-	 * src/dest l3 and src/dest l4 headers.
-	 */
-	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_4 \
-		UINT32_C(0x8)
-	/*
-	 * When this bit is '1', it indicates requesting support of
-	 * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for
-	 * tunnel packets. For none-tunnel packets, the RSS hash is
-	 * computed over the normal src/dest l3 headers.
-	 */
-	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_2 \
-		UINT32_C(0x10)
-	/* This is the address for rss ring group table */
-	uint64_t	ring_grp_tbl_addr;
-	/* This is the address for rss hash key table */
-	uint64_t	hash_key_tbl_addr;
-	/* Index to the rss indirection table. */
-	uint16_t	rss_ctx_idx;
-	uint8_t	unused_1[6];
-} __attribute__((packed));
-
-/* hwrm_vnic_rss_cfg_output (size:128b/16B) */
-struct hwrm_vnic_rss_cfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**********************
- * hwrm_vnic_rss_qcfg *
- **********************/
-
-
-/* hwrm_vnic_rss_qcfg_input (size:192b/24B) */
-struct hwrm_vnic_rss_qcfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* Index to the rss indirection table. */
-	uint16_t	rss_ctx_idx;
-	uint8_t	unused_0[6];
-} __attribute__((packed));
-
-/* hwrm_vnic_rss_qcfg_output (size:512b/64B) */
-struct hwrm_vnic_rss_qcfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint32_t	hash_type;
-	/*
-	 * When this bit is '1', the RSS hash shall be computed
-	 * over source and destination IPv4 addresses of IPv4
-	 * packets.
-	 */
-	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV4         UINT32_C(0x1)
-	/*
-	 * When this bit is '1', the RSS hash shall be computed
-	 * over source/destination IPv4 addresses and
-	 * source/destination ports of TCP/IPv4 packets.
-	 */
-	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV4     UINT32_C(0x2)
-	/*
-	 * When this bit is '1', the RSS hash shall be computed
-	 * over source/destination IPv4 addresses and
-	 * source/destination ports of UDP/IPv4 packets.
-	 */
-	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV4     UINT32_C(0x4)
-	/*
-	 * When this bit is '1', the RSS hash shall be computed
-	 * over source and destination IPv4 addresses of IPv6
-	 * packets.
-	 */
-	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV6         UINT32_C(0x8)
-	/*
-	 * When this bit is '1', the RSS hash shall be computed
-	 * over source/destination IPv6 addresses and
-	 * source/destination ports of TCP/IPv6 packets.
-	 */
-	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV6     UINT32_C(0x10)
-	/*
-	 * When this bit is '1', the RSS hash shall be computed
-	 * over source/destination IPv6 addresses and
-	 * source/destination ports of UDP/IPv6 packets.
-	 */
-	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV6     UINT32_C(0x20)
-	uint8_t	unused_0[4];
-	/* This is the value of rss hash key */
-	uint32_t	hash_key[10];
-	/* Flags to specify different RSS hash modes. */
-	uint8_t	hash_mode_flags;
-	/*
-	 * When this bit is '1', it indicates using current RSS
-	 * hash mode setting configured in the device.
-	 */
-	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_DEFAULT \
-		UINT32_C(0x1)
-	/*
-	 * When this bit is '1', it indicates requesting support of
-	 * RSS hashing over innermost 4 tuples {l3.src, l3.dest,
-	 * l4.src, l4.dest} for tunnel packets. For none-tunnel
-	 * packets, the RSS hash is computed over the normal
-	 * src/dest l3 and src/dest l4 headers.
-	 */
-	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_4 \
-		UINT32_C(0x2)
-	/*
-	 * When this bit is '1', it indicates requesting support of
-	 * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for
-	 * tunnel packets. For none-tunnel packets, the RSS hash is
-	 * computed over the normal src/dest l3 headers.
-	 */
-	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_2 \
-		UINT32_C(0x4)
-	/*
-	 * When this bit is '1', it indicates requesting support of
-	 * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest,
-	 * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel
-	 * packets, the RSS hash is computed over the normal
-	 * src/dest l3 and src/dest l4 headers.
-	 */
-	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_4 \
-		UINT32_C(0x8)
-	/*
-	 * When this bit is '1', it indicates requesting support of
-	 * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for
-	 * tunnel packets. For none-tunnel packets, the RSS hash is
-	 * computed over the normal src/dest l3 headers.
-	 */
-	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_2 \
-		UINT32_C(0x10)
-	uint8_t	unused_1[6];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**************************
- * hwrm_vnic_plcmodes_cfg *
- **************************/
-
-
-/* hwrm_vnic_plcmodes_cfg_input (size:320b/40B) */
-struct hwrm_vnic_plcmodes_cfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	flags;
-	/*
-	 * When this bit is '1', the VNIC shall be configured to
-	 * use regular placement algorithm.
-	 * By default, the regular placement algorithm shall be
-	 * enabled on the VNIC.
-	 */
-	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_REGULAR_PLACEMENT \
-		UINT32_C(0x1)
-	/*
-	 * When this bit is '1', the VNIC shall be configured
-	 * use the jumbo placement algorithm.
-	 */
-	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_JUMBO_PLACEMENT \
-		UINT32_C(0x2)
-	/*
-	 * When this bit is '1', the VNIC shall be configured
-	 * to enable Header-Data split for IPv4 packets according
-	 * to the following rules:
-	 * # If the packet is identified as TCP/IPv4, then the
-	 * packet is split at the beginning of the TCP payload.
-	 * # If the packet is identified as UDP/IPv4, then the
-	 * packet is split at the beginning of UDP payload.
-	 * # If the packet is identified as non-TCP and non-UDP
-	 * IPv4 packet, then the packet is split at the beginning
-	 * of the upper layer protocol header carried in the IPv4
-	 * packet.
-	 */
-	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV4 \
-		UINT32_C(0x4)
-	/*
-	 * When this bit is '1', the VNIC shall be configured
-	 * to enable Header-Data split for IPv6 packets according
-	 * to the following rules:
-	 * # If the packet is identified as TCP/IPv6, then the
-	 * packet is split at the beginning of the TCP payload.
-	 * # If the packet is identified as UDP/IPv6, then the
-	 * packet is split at the beginning of UDP payload.
-	 * # If the packet is identified as non-TCP and non-UDP
-	 * IPv6 packet, then the packet is split at the beginning
-	 * of the upper layer protocol header carried in the IPv6
-	 * packet.
-	 */
-	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV6 \
-		UINT32_C(0x8)
-	/*
-	 * When this bit is '1', the VNIC shall be configured
-	 * to enable Header-Data split for FCoE packets at the
-	 * beginning of FC payload.
-	 */
-	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_FCOE \
-		UINT32_C(0x10)
-	/*
-	 * When this bit is '1', the VNIC shall be configured
-	 * to enable Header-Data split for RoCE packets at the
-	 * beginning of RoCE payload (after BTH/GRH headers).
-	 */
-	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_ROCE \
-		UINT32_C(0x20)
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the jumbo_thresh_valid field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_JUMBO_THRESH_VALID \
-		UINT32_C(0x1)
-	/*
-	 * This bit must be '1' for the hds_offset_valid field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_OFFSET_VALID \
-		UINT32_C(0x2)
-	/*
-	 * This bit must be '1' for the hds_threshold_valid field to be
-	 * configured.
-	 */
-	#define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_THRESHOLD_VALID \
-		UINT32_C(0x4)
-	/* Logical vnic ID */
-	uint32_t	vnic_id;
-	/*
-	 * When jumbo placement algorithm is enabled, this value
-	 * is used to determine the threshold for jumbo placement.
-	 * Packets with length larger than this value will be
-	 * placed according to the jumbo placement algorithm.
-	 */
-	uint16_t	jumbo_thresh;
-	/*
-	 * This value is used to determine the offset into
-	 * packet buffer where the split data (payload) will be
-	 * placed according to one of of HDS placement algorithm.
-	 *
-	 * The lengths of packet buffers provided for split data
-	 * shall be larger than this value.
-	 */
-	uint16_t	hds_offset;
-	/*
-	 * When one of the HDS placement algorithm is enabled, this
-	 * value is used to determine the threshold for HDS
-	 * placement.
-	 * Packets with length larger than this value will be
-	 * placed according to the HDS placement algorithm.
-	 * This value shall be in multiple of 4 bytes.
-	 */
-	uint16_t	hds_threshold;
-	uint8_t	unused_0[6];
-} __attribute__((packed));
-
-/* hwrm_vnic_plcmodes_cfg_output (size:128b/16B) */
-struct hwrm_vnic_plcmodes_cfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/***************************
- * hwrm_vnic_plcmodes_qcfg *
- ***************************/
-
-
-/* hwrm_vnic_plcmodes_qcfg_input (size:192b/24B) */
-struct hwrm_vnic_plcmodes_qcfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* Logical vnic ID */
-	uint32_t	vnic_id;
-	uint8_t	unused_0[4];
-} __attribute__((packed));
-
-/* hwrm_vnic_plcmodes_qcfg_output (size:192b/24B) */
-struct hwrm_vnic_plcmodes_qcfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint32_t	flags;
-	/*
-	 * When this bit is '1', the VNIC is configured to
-	 * use regular placement algorithm.
-	 */
-	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_REGULAR_PLACEMENT \
-		UINT32_C(0x1)
-	/*
-	 * When this bit is '1', the VNIC is configured to
-	 * use the jumbo placement algorithm.
-	 */
-	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_JUMBO_PLACEMENT \
-		UINT32_C(0x2)
-	/*
-	 * When this bit is '1', the VNIC is configured
-	 * to enable Header-Data split for IPv4 packets.
-	 */
-	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV4 \
-		UINT32_C(0x4)
-	/*
-	 * When this bit is '1', the VNIC is configured
-	 * to enable Header-Data split for IPv6 packets.
-	 */
-	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV6 \
-		UINT32_C(0x8)
-	/*
-	 * When this bit is '1', the VNIC is configured
-	 * to enable Header-Data split for FCoE packets.
-	 */
-	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_FCOE \
-		UINT32_C(0x10)
-	/*
-	 * When this bit is '1', the VNIC is configured
-	 * to enable Header-Data split for RoCE packets.
-	 */
-	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_ROCE \
-		UINT32_C(0x20)
-	/*
-	 * When this bit is '1', the VNIC is configured
-	 * to be the default VNIC of the requesting function.
-	 */
-	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_DFLT_VNIC \
-		UINT32_C(0x40)
-	/*
-	 * When jumbo placement algorithm is enabled, this value
-	 * is used to determine the threshold for jumbo placement.
-	 * Packets with length larger than this value will be
-	 * placed according to the jumbo placement algorithm.
-	 */
-	uint16_t	jumbo_thresh;
-	/*
-	 * This value is used to determine the offset into
-	 * packet buffer where the split data (payload) will be
-	 * placed according to one of of HDS placement algorithm.
-	 *
-	 * The lengths of packet buffers provided for split data
-	 * shall be larger than this value.
-	 */
-	uint16_t	hds_offset;
-	/*
-	 * When one of the HDS placement algorithm is enabled, this
-	 * value is used to determine the threshold for HDS
-	 * placement.
-	 * Packets with length larger than this value will be
-	 * placed according to the HDS placement algorithm.
-	 * This value shall be in multiple of 4 bytes.
-	 */
-	uint16_t	hds_threshold;
-	uint8_t	unused_0[5];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**********************************
- * hwrm_vnic_rss_cos_lb_ctx_alloc *
- **********************************/
-
-
-/* hwrm_vnic_rss_cos_lb_ctx_alloc_input (size:128b/16B) */
-struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-} __attribute__((packed));
-
-/* hwrm_vnic_rss_cos_lb_ctx_alloc_output (size:128b/16B) */
-struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* rss_cos_lb_ctx_id is 16 b */
-	uint16_t	rss_cos_lb_ctx_id;
-	uint8_t	unused_0[5];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/*********************************
- * hwrm_vnic_rss_cos_lb_ctx_free *
- *********************************/
-
-
-/* hwrm_vnic_rss_cos_lb_ctx_free_input (size:192b/24B) */
-struct hwrm_vnic_rss_cos_lb_ctx_free_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* rss_cos_lb_ctx_id is 16 b */
-	uint16_t	rss_cos_lb_ctx_id;
-	uint8_t	unused_0[6];
-} __attribute__((packed));
-
-/* hwrm_vnic_rss_cos_lb_ctx_free_output (size:128b/16B) */
-struct hwrm_vnic_rss_cos_lb_ctx_free_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/*******************
- * hwrm_ring_alloc *
- *******************/
-
-
-/* hwrm_ring_alloc_input (size:640b/80B) */
-struct hwrm_ring_alloc_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the ring_arb_cfg field to be
-	 * configured.
-	 */
-	#define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG \
-		UINT32_C(0x2)
-	/*
-	 * This bit must be '1' for the stat_ctx_id_valid field to be
-	 * configured.
-	 */
-	#define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID \
-		UINT32_C(0x8)
-	/*
-	 * This bit must be '1' for the max_bw_valid field to be
-	 * configured.
-	 */
-	#define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID \
-		UINT32_C(0x20)
-	/*
-	 * This bit must be '1' for the rx_ring_id field to be
-	 * configured.
-	 */
-	#define HWRM_RING_ALLOC_INPUT_ENABLES_RX_RING_ID_VALID \
-		UINT32_C(0x40)
-	/*
-	 * This bit must be '1' for the nq_ring_id field to be
-	 * configured.
-	 */
-	#define HWRM_RING_ALLOC_INPUT_ENABLES_NQ_RING_ID_VALID \
-		UINT32_C(0x80)
-	/*
-	 * This bit must be '1' for the rx_buf_size field to be
-	 * configured.
-	 */
-	#define HWRM_RING_ALLOC_INPUT_ENABLES_RX_BUF_SIZE_VALID \
-		UINT32_C(0x100)
-	/* Ring Type. */
-	uint8_t	ring_type;
-	/* L2 Completion Ring (CR) */
-	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL   UINT32_C(0x0)
-	/* TX Ring (TR) */
-	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX        UINT32_C(0x1)
-	/* RX Ring (RR) */
-	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX        UINT32_C(0x2)
-	/* RoCE Notification Completion Ring (ROCE_CR) */
-	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
-	/* RX Aggregation Ring */
-	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX_AGG    UINT32_C(0x4)
-	/* Notification Queue */
-	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ        UINT32_C(0x5)
-	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_LAST \
-		HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ
-	uint8_t	unused_0[3];
-	/*
-	 * This value is a pointer to the page table for the
-	 * Ring.
-	 */
-	uint64_t	page_tbl_addr;
-	/* First Byte Offset of the first entry in the first page. */
-	uint32_t	fbo;
-	/*
-	 * Actual page size in 2^page_size. The supported range is increments
-	 * in powers of 2 from 16 bytes to 1GB.
-	 * - 4 = 16 B
-	 *     Page size is 16 B.
-	 * - 12 = 4 KB
-	 *     Page size is 4 KB.
-	 * - 13 = 8 KB
-	 *     Page size is 8 KB.
-	 * - 16 = 64 KB
-	 *     Page size is 64 KB.
-	 * - 21 = 2 MB
-	 *     Page size is 2 MB.
-	 * - 22 = 4 MB
-	 *     Page size is 4 MB.
-	 * - 30 = 1 GB
-	 *     Page size is 1 GB.
-	 */
-	uint8_t	page_size;
-	/*
-	 * This value indicates the depth of page table.
-	 * For this version of the specification, value other than 0 or
-	 * 1 shall be considered as an invalid value.
-	 * When the page_tbl_depth = 0, then it is treated as a
-	 * special case with the following.
-	 * 1. FBO and page size fields are not valid.
-	 * 2. page_tbl_addr is the physical address of the first
-	 *    element of the ring.
-	 */
-	uint8_t	page_tbl_depth;
-	uint8_t	unused_1[2];
-	/*
-	 * Number of 16B units in the ring.  Minimum size for
-	 * a ring is 16 16B entries.
-	 */
-	uint32_t	length;
-	/*
-	 * Logical ring number for the ring to be allocated.
-	 * This value determines the position in the doorbell
-	 * area where the update to the ring will be made.
-	 *
-	 * For completion rings, this value is also the MSI-X
-	 * vector number for the function the completion ring is
-	 * associated with.
-	 */
-	uint16_t	logical_id;
-	/*
-	 * This field is used only when ring_type is a TX ring.
-	 * This value indicates what completion ring the TX ring
-	 * is associated with.
-	 */
-	uint16_t	cmpl_ring_id;
-	/*
-	 * This field is used only when ring_type is a TX ring.
-	 * This value indicates what CoS queue the TX ring
-	 * is associated with.
-	 */
-	uint16_t	queue_id;
-	/*
-	 * When allocating a Rx ring or Rx aggregation ring, this field
-	 * specifies the size of the buffer descriptors posted to the ring.
-	 */
-	uint16_t	rx_buf_size;
-	/*
-	 * When allocating an Rx aggregation ring, this field
-	 * specifies the associated Rx ring ID.
-	 */
-	uint16_t	rx_ring_id;
-	/*
-	 * When allocating a completion ring, this field
-	 * specifies the associated NQ ring ID.
-	 */
-	uint16_t	nq_ring_id;
-	/*
-	 * This field is used only when ring_type is a TX ring.
-	 * This field is used to configure arbitration related
-	 * parameters for a TX ring.
-	 */
-	uint16_t	ring_arb_cfg;
-	/* Arbitration policy used for the ring. */
-	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK \
-		UINT32_C(0xf)
-	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT       0
-	/*
-	 * Use strict priority for the TX ring.
-	 * Priority value is specified in arb_policy_param
-	 */
-	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \
-		UINT32_C(0x1)
-	/*
-	 * Use weighted fair queue arbitration for the TX ring.
-	 * Weight is specified in arb_policy_param
-	 */
-	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \
-		UINT32_C(0x2)
-	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \
-		HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ
-	/* Reserved field. */
-	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK \
-		UINT32_C(0xf0)
-	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_SFT             4
-	/*
-	 * Arbitration policy specific parameter.
-	 * # For strict priority arbitration policy, this field
-	 * represents a priority value. If set to 0, then the priority
-	 * is not specified and the HWRM is allowed to select
-	 * any priority for this TX ring.
-	 * # For weighted fair queue arbitration policy, this field
-	 * represents a weight value. If set to 0, then the weight
-	 * is not specified and the HWRM is allowed to select
-	 * any weight for this TX ring.
-	 */
-	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK \
-		UINT32_C(0xff00)
-	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8
-	uint16_t	unused_3;
-	/*
-	 * This field is reserved for the future use.
-	 * It shall be set to 0.
-	 */
-	uint32_t	reserved3;
-	/*
-	 * This field is used only when ring_type is a TX ring.
-	 * This input indicates what statistics context this ring
-	 * should be associated with.
-	 */
-	uint32_t	stat_ctx_id;
-	/*
-	 * This field is reserved for the future use.
-	 * It shall be set to 0.
-	 */
-	uint32_t	reserved4;
-	/*
-	 * This field is used only when ring_type is a TX ring
-	 * to specify maximum BW allocated to the TX ring.
-	 * The HWRM will translate this value into byte counter and
-	 * time interval used for this ring inside the device.
-	 */
-	uint32_t	max_bw;
-	/* The bandwidth value. */
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK \
-		UINT32_C(0xfffffff)
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT              0
-	/* The granularity of the value (bits or bytes). */
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE \
-		UINT32_C(0x10000000)
-	/* Value is in bits. */
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BITS \
-		(UINT32_C(0x0) << 28)
-	/* Value is in bytes. */
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES \
-		(UINT32_C(0x1) << 28)
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_LAST \
-		HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES
-	/* bw_value_unit is 3 b */
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
-		UINT32_C(0xe0000000)
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT         29
-	/* Value is in Mb or MB (base 10). */
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
-		(UINT32_C(0x0) << 29)
-	/* Value is in Kb or KB (base 10). */
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \
-		(UINT32_C(0x2) << 29)
-	/* Value is in bits or bytes. */
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \
-		(UINT32_C(0x4) << 29)
-	/* Value is in Gb or GB (base 10). */
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
-		(UINT32_C(0x6) << 29)
-	/* Value is in 1/100th of a percentage of total bandwidth. */
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
-		(UINT32_C(0x1) << 29)
-	/* Invalid unit */
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
-		(UINT32_C(0x7) << 29)
-	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
-		HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
-	/*
-	 * This field is used only when ring_type is a Completion ring.
-	 * This value indicates what interrupt mode should be used
-	 * on this completion ring.
-	 * Note: In the legacy interrupt mode, no more than 16
-	 * completion rings are allowed.
-	 */
-	uint8_t	int_mode;
-	/* Legacy INTA */
-	#define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY UINT32_C(0x0)
-	/* Reserved */
-	#define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD   UINT32_C(0x1)
-	/* MSI-X */
-	#define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX   UINT32_C(0x2)
-	/* No Interrupt - Polled mode */
-	#define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL   UINT32_C(0x3)
-	#define HWRM_RING_ALLOC_INPUT_INT_MODE_LAST \
-		HWRM_RING_ALLOC_INPUT_INT_MODE_POLL
-	uint8_t	unused_4[3];
-} __attribute__((packed));
-
-/* hwrm_ring_alloc_output (size:128b/16B) */
-struct hwrm_ring_alloc_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/*
-	 * Physical number of ring allocated.
-	 * This value shall be unique for a ring type.
-	 */
-	uint16_t	ring_id;
-	/* Logical number of ring allocated. */
-	uint16_t	logical_ring_id;
-	uint8_t	unused_0[3];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/******************
- * hwrm_ring_free *
- ******************/
-
-
-/* hwrm_ring_free_input (size:192b/24B) */
-struct hwrm_ring_free_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* Ring Type. */
-	uint8_t	ring_type;
-	/* L2 Completion Ring (CR) */
-	#define HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL   UINT32_C(0x0)
-	/* TX Ring (TR) */
-	#define HWRM_RING_FREE_INPUT_RING_TYPE_TX        UINT32_C(0x1)
-	/* RX Ring (RR) */
-	#define HWRM_RING_FREE_INPUT_RING_TYPE_RX        UINT32_C(0x2)
-	/* RoCE Notification Completion Ring (ROCE_CR) */
-	#define HWRM_RING_FREE_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
-	/* RX Aggregation Ring */
-	#define HWRM_RING_FREE_INPUT_RING_TYPE_RX_AGG    UINT32_C(0x4)
-	/* Notification Queue */
-	#define HWRM_RING_FREE_INPUT_RING_TYPE_NQ        UINT32_C(0x5)
-	#define HWRM_RING_FREE_INPUT_RING_TYPE_LAST \
-		HWRM_RING_FREE_INPUT_RING_TYPE_NQ
-	uint8_t	unused_0;
-	/* Physical number of ring allocated. */
-	uint16_t	ring_id;
-	uint8_t	unused_1[4];
-} __attribute__((packed));
-
-/* hwrm_ring_free_output (size:128b/16B) */
-struct hwrm_ring_free_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**************************************
- * hwrm_ring_cmpl_ring_qaggint_params *
- **************************************/
-
-
-/* hwrm_ring_cmpl_ring_qaggint_params_input (size:192b/24B) */
-struct hwrm_ring_cmpl_ring_qaggint_params_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* Physical number of completion ring. */
-	uint16_t	ring_id;
-	uint8_t	unused_0[6];
-} __attribute__((packed));
-
-/* hwrm_ring_cmpl_ring_qaggint_params_output (size:256b/32B) */
-struct hwrm_ring_cmpl_ring_qaggint_params_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint16_t	flags;
-	/*
-	 * When this bit is set to '1', interrupt max
-	 * timer is reset whenever a completion is received.
-	 */
-	#define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_TIMER_RESET \
-		UINT32_C(0x1)
-	/*
-	 * When this bit is set to '1', ring idle mode
-	 * aggregation will be enabled.
-	 */
-	#define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_RING_IDLE \
-		UINT32_C(0x2)
-	/*
-	 * Number of completions to aggregate before DMA
-	 * during the normal mode.
-	 */
-	uint16_t	num_cmpl_dma_aggr;
-	/*
-	 * Number of completions to aggregate before DMA
-	 * during the interrupt mode.
-	 */
-	uint16_t	num_cmpl_dma_aggr_during_int;
-	/*
-	 * Timer in unit of 80-nsec used to aggregate completions before
-	 * DMA during the normal mode (not in interrupt mode).
-	 */
-	uint16_t	cmpl_aggr_dma_tmr;
-	/*
-	 * Timer in unit of 80-nsec used to aggregate completions before
-	 * DMA during the interrupt mode.
-	 */
-	uint16_t	cmpl_aggr_dma_tmr_during_int;
-	/* Minimum time (in unit of 80-nsec) between two interrupts. */
-	uint16_t	int_lat_tmr_min;
-	/*
-	 * Maximum wait time (in unit of 80-nsec) spent aggregating
-	 * completions before signaling the interrupt after the
-	 * interrupt is enabled.
-	 */
-	uint16_t	int_lat_tmr_max;
-	/*
-	 * Minimum number of completions aggregated before signaling
-	 * an interrupt.
-	 */
-	uint16_t	num_cmpl_aggr_int;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/*****************************************
- * hwrm_ring_cmpl_ring_cfg_aggint_params *
- *****************************************/
-
-
-/* hwrm_ring_cmpl_ring_cfg_aggint_params_input (size:320b/40B) */
-struct hwrm_ring_cmpl_ring_cfg_aggint_params_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* Physical number of completion ring. */
-	uint16_t	ring_id;
-	uint16_t	flags;
-	/*
-	 * When this bit is set to '1', interrupt latency max
-	 * timer is reset whenever a completion is received.
-	 */
-	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_TIMER_RESET \
-		UINT32_C(0x1)
-	/*
-	 * When this bit is set to '1', ring idle mode
-	 * aggregation will be enabled.
-	 */
-	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_RING_IDLE \
-		UINT32_C(0x2)
-	/*
-	 * Set this flag to 1 when configuring parameters on a
-	 * notification queue. Set this flag to 0 when configuring
-	 * parameters on a completion queue.
-	 */
-	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_IS_NQ \
-		UINT32_C(0x4)
-	/*
-	 * Number of completions to aggregate before DMA
-	 * during the normal mode.
-	 */
-	uint16_t	num_cmpl_dma_aggr;
-	/*
-	 * Number of completions to aggregate before DMA
-	 * during the interrupt mode.
-	 */
-	uint16_t	num_cmpl_dma_aggr_during_int;
-	/*
-	 * Timer in unit of 80-nsec used to aggregate completions before
-	 * DMA during the normal mode (not in interrupt mode).
-	 */
-	uint16_t	cmpl_aggr_dma_tmr;
-	/*
-	 * Timer in unit of 80-nsec used to aggregate completions before
-	 * DMA during the interrupt mode.
-	 */
-	uint16_t	cmpl_aggr_dma_tmr_during_int;
-	/* Minimum time (in unit of 80-nsec) between two interrupts. */
-	uint16_t	int_lat_tmr_min;
-	/*
-	 * Maximum wait time (in unit of 80-nsec) spent aggregating
-	 * cmpls before signaling the interrupt after the
-	 * interrupt is enabled.
-	 */
-	uint16_t	int_lat_tmr_max;
-	/*
-	 * Minimum number of completions aggregated before signaling
-	 * an interrupt.
-	 */
-	uint16_t	num_cmpl_aggr_int;
-	/*
-	 * Bitfield that indicates which parameters are to be applied. Only
-	 * required when configuring devices with notification queues, and
-	 * used in that case to set certain parameters on completion queues
-	 * and others on notification queues.
-	 */
-	uint16_t	enables;
-	/*
-	 * This bit must be '1' for the num_cmpl_dma_aggr field to be
-	 * configured.
-	 */
-	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR \
-		UINT32_C(0x1)
-	/*
-	 * This bit must be '1' for the num_cmpl_dma_aggr_during_int field to be
-	 * configured.
-	 */
-	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR_DURING_INT \
-		UINT32_C(0x2)
-	/*
-	 * This bit must be '1' for the cmpl_aggr_dma_tmr field to be
-	 * configured.
-	 */
-	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_CMPL_AGGR_DMA_TMR \
-		UINT32_C(0x4)
-	/*
-	 * This bit must be '1' for the int_lat_tmr_min field to be
-	 * configured.
-	 */
-	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MIN \
-		UINT32_C(0x8)
-	/*
-	 * This bit must be '1' for the int_lat_tmr_max field to be
-	 * configured.
-	 */
-	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MAX \
-		UINT32_C(0x10)
-	/*
-	 * This bit must be '1' for the num_cmpl_aggr_int field to be
-	 * configured.
-	 */
-	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_AGGR_INT \
-		UINT32_C(0x20)
-	uint8_t	unused_0[4];
-} __attribute__((packed));
-
-/* hwrm_ring_cmpl_ring_cfg_aggint_params_output (size:128b/16B) */
-struct hwrm_ring_cmpl_ring_cfg_aggint_params_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/*******************
- * hwrm_ring_reset *
- *******************/
-
-
-/* hwrm_ring_reset_input (size:192b/24B) */
-struct hwrm_ring_reset_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* Ring Type. */
-	uint8_t	ring_type;
-	/* L2 Completion Ring (CR) */
-	#define HWRM_RING_RESET_INPUT_RING_TYPE_L2_CMPL   UINT32_C(0x0)
-	/* TX Ring (TR) */
-	#define HWRM_RING_RESET_INPUT_RING_TYPE_TX        UINT32_C(0x1)
-	/* RX Ring (RR) */
-	#define HWRM_RING_RESET_INPUT_RING_TYPE_RX        UINT32_C(0x2)
-	/* RoCE Notification Completion Ring (ROCE_CR) */
-	#define HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
-	#define HWRM_RING_RESET_INPUT_RING_TYPE_LAST \
-		HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL
-	uint8_t	unused_0;
-	/* Physical number of the ring. */
-	uint16_t	ring_id;
-	uint8_t	unused_1[4];
-} __attribute__((packed));
-
-/* hwrm_ring_reset_output (size:128b/16B) */
-struct hwrm_ring_reset_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/***********************
- * hwrm_ring_grp_alloc *
- ***********************/
-
-
-/* hwrm_ring_grp_alloc_input (size:192b/24B) */
-struct hwrm_ring_grp_alloc_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/*
-	 * This value identifies the CR associated with the ring
-	 * group.
-	 */
-	uint16_t	cr;
-	/*
-	 * This value identifies the main RR associated with the ring
-	 * group.
-	 */
-	uint16_t	rr;
-	/*
-	 * This value identifies the aggregation RR associated with
-	 * the ring group.  If this value is 0xFF... (All Fs), then no
-	 * Aggregation ring will be set.
-	 */
-	uint16_t	ar;
-	/*
-	 * This value identifies the statistics context associated
-	 * with the ring group.
-	 */
-	uint16_t	sc;
-} __attribute__((packed));
-
-/* hwrm_ring_grp_alloc_output (size:128b/16B) */
-struct hwrm_ring_grp_alloc_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/*
-	 * This is the ring group ID value.  Use this value to program
-	 * the default ring group for the VNIC or as table entries
-	 * in an RSS/COS context.
-	 */
-	uint32_t	ring_group_id;
-	uint8_t	unused_0[3];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**********************
- * hwrm_ring_grp_free *
- **********************/
-
-
-/* hwrm_ring_grp_free_input (size:192b/24B) */
-struct hwrm_ring_grp_free_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* This is the ring group ID value. */
-	uint32_t	ring_group_id;
-	uint8_t	unused_0[4];
-} __attribute__((packed));
-
-/* hwrm_ring_grp_free_output (size:128b/16B) */
-struct hwrm_ring_grp_free_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/****************************
- * hwrm_cfa_l2_filter_alloc *
- ****************************/
-
-
-/* hwrm_cfa_l2_filter_alloc_input (size:768b/96B) */
-struct hwrm_cfa_l2_filter_alloc_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	flags;
-	/*
-	 * Enumeration denoting the RX, TX type of the resource.
-	 * This enumeration is used for resources that are similar for both
-	 * TX and RX paths of the chip.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH \
-		UINT32_C(0x1)
-	/* tx path */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \
-		UINT32_C(0x0)
-	/* rx path */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \
-		UINT32_C(0x1)
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
-		HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
-	/* Setting of this flag indicates the applicability to the loopback path. */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
-		UINT32_C(0x2)
-	/*
-	 * Setting of this flag indicates drop action. If this flag is not set,
-	 * then it should be considered accept action.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP \
-		UINT32_C(0x4)
-	/*
-	 * If this flag is set, all t_l2_* fields are invalid
-	 * and they should not be specified.
-	 * If this flag is set, then l2_* fields refer to
-	 * fields of outermost L2 header.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST \
-		UINT32_C(0x8)
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the l2_addr field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \
-		UINT32_C(0x1)
-	/*
-	 * This bit must be '1' for the l2_addr_mask field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \
-		UINT32_C(0x2)
-	/*
-	 * This bit must be '1' for the l2_ovlan field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN \
-		UINT32_C(0x4)
-	/*
-	 * This bit must be '1' for the l2_ovlan_mask field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \
-		UINT32_C(0x8)
-	/*
-	 * This bit must be '1' for the l2_ivlan field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \
-		UINT32_C(0x10)
-	/*
-	 * This bit must be '1' for the l2_ivlan_mask field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \
-		UINT32_C(0x20)
-	/*
-	 * This bit must be '1' for the t_l2_addr field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR \
-		UINT32_C(0x40)
-	/*
-	 * This bit must be '1' for the t_l2_addr_mask field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \
-		UINT32_C(0x80)
-	/*
-	 * This bit must be '1' for the t_l2_ovlan field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \
-		UINT32_C(0x100)
-	/*
-	 * This bit must be '1' for the t_l2_ovlan_mask field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \
-		UINT32_C(0x200)
-	/*
-	 * This bit must be '1' for the t_l2_ivlan field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \
-		UINT32_C(0x400)
-	/*
-	 * This bit must be '1' for the t_l2_ivlan_mask field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \
-		UINT32_C(0x800)
-	/*
-	 * This bit must be '1' for the src_type field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE \
-		UINT32_C(0x1000)
-	/*
-	 * This bit must be '1' for the src_id field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID \
-		UINT32_C(0x2000)
-	/*
-	 * This bit must be '1' for the tunnel_type field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
-		UINT32_C(0x4000)
-	/*
-	 * This bit must be '1' for the dst_id field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
-		UINT32_C(0x8000)
-	/*
-	 * This bit must be '1' for the mirror_vnic_id field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
-		UINT32_C(0x10000)
-	/*
-	 * This value sets the match value for the L2 MAC address.
-	 * Destination MAC address for RX path.
-	 * Source MAC address for TX path.
-	 */
-	uint8_t	l2_addr[6];
-	uint8_t	unused_0[2];
-	/*
-	 * This value sets the mask value for the L2 address.
-	 * A value of 0 will mask the corresponding bit from
-	 * compare.
-	 */
-	uint8_t	l2_addr_mask[6];
-	/* This value sets VLAN ID value for outer VLAN. */
-	uint16_t	l2_ovlan;
-	/*
-	 * This value sets the mask value for the ovlan id.
-	 * A value of 0 will mask the corresponding bit from
-	 * compare.
-	 */
-	uint16_t	l2_ovlan_mask;
-	/* This value sets VLAN ID value for inner VLAN. */
-	uint16_t	l2_ivlan;
-	/*
-	 * This value sets the mask value for the ivlan id.
-	 * A value of 0 will mask the corresponding bit from
-	 * compare.
-	 */
-	uint16_t	l2_ivlan_mask;
-	uint8_t	unused_1[2];
-	/*
-	 * This value sets the match value for the tunnel
-	 * L2 MAC address.
-	 * Destination MAC address for RX path.
-	 * Source MAC address for TX path.
-	 */
-	uint8_t	t_l2_addr[6];
-	uint8_t	unused_2[2];
-	/*
-	 * This value sets the mask value for the tunnel L2
-	 * address.
-	 * A value of 0 will mask the corresponding bit from
-	 * compare.
-	 */
-	uint8_t	t_l2_addr_mask[6];
-	/* This value sets VLAN ID value for tunnel outer VLAN. */
-	uint16_t	t_l2_ovlan;
-	/*
-	 * This value sets the mask value for the tunnel ovlan id.
-	 * A value of 0 will mask the corresponding bit from
-	 * compare.
-	 */
-	uint16_t	t_l2_ovlan_mask;
-	/* This value sets VLAN ID value for tunnel inner VLAN. */
-	uint16_t	t_l2_ivlan;
-	/*
-	 * This value sets the mask value for the tunnel ivlan id.
-	 * A value of 0 will mask the corresponding bit from
-	 * compare.
-	 */
-	uint16_t	t_l2_ivlan_mask;
-	/* This value identifies the type of source of the packet. */
-	uint8_t	src_type;
-	/* Network port */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0)
-	/* Physical function */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF    UINT32_C(0x1)
-	/* Virtual function */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF    UINT32_C(0x2)
-	/* Virtual NIC of a function */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC  UINT32_C(0x3)
-	/* Embedded processor for CFA management */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG  UINT32_C(0x4)
-	/* Embedded processor for OOB management */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE   UINT32_C(0x5)
-	/* Embedded processor for RoCE */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO  UINT32_C(0x6)
-	/* Embedded processor for network proxy functions */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG  UINT32_C(0x7)
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_LAST \
-		HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG
-	uint8_t	unused_3;
-	/*
-	 * This value is the id of the source.
-	 * For a network port, it represents port_id.
-	 * For a physical function, it represents fid.
-	 * For a virtual function, it represents vf_id.
-	 * For a vnic, it represents vnic_id.
-	 * For embedded processors, this id is not valid.
-	 *
-	 * Notes:
-	 * 1. The function ID is implied if it src_id is
-	 *    not provided for a src_type that is either
-	 */
-	uint32_t	src_id;
-	/* Tunnel Type. */
-	uint8_t	tunnel_type;
-	/* Non-tunnel */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
-		UINT32_C(0x0)
-	/* Virtual eXtensible Local Area Network (VXLAN) */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
-		UINT32_C(0x1)
-	/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
-		UINT32_C(0x2)
-	/* Generic Routing Encapsulation (GRE) inside Ethernet payload */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
-		UINT32_C(0x3)
-	/* IP in IP */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
-		UINT32_C(0x4)
-	/* Generic Network Virtualization Encapsulation (Geneve) */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
-		UINT32_C(0x5)
-	/* Multi-Protocol Lable Switching (MPLS) */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
-		UINT32_C(0x6)
-	/* Stateless Transport Tunnel (STT) */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
-		UINT32_C(0x7)
-	/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
-		UINT32_C(0x8)
-	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
-		UINT32_C(0x9)
-	/* Any tunneled traffic */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
-		UINT32_C(0xff)
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
-		HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
-	uint8_t	unused_4;
-	/*
-	 * If set, this value shall represent the
-	 * Logical VNIC ID of the destination VNIC for the RX
-	 * path and network port id of the destination port for
-	 * the TX path.
-	 */
-	uint16_t	dst_id;
-	/*
-	 * Logical VNIC ID of the VNIC where traffic is
-	 * mirrored.
-	 */
-	uint16_t	mirror_vnic_id;
-	/*
-	 * This hint is provided to help in placing
-	 * the filter in the filter table.
-	 */
-	uint8_t	pri_hint;
-	/* No preference */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
-		UINT32_C(0x0)
-	/* Above the given filter */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \
-		UINT32_C(0x1)
-	/* Below the given filter */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \
-		UINT32_C(0x2)
-	/* As high as possible */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX \
-		UINT32_C(0x3)
-	/* As low as possible */
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN \
-		UINT32_C(0x4)
-	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_LAST \
-		HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN
-	uint8_t	unused_5;
-	uint32_t	unused_6;
-	/*
-	 * This is the ID of the filter that goes along with
-	 * the pri_hint.
-	 *
-	 * This field is valid only for the following values.
-	 * 1 - Above the given filter
-	 * 2 - Below the given filter
-	 */
-	uint64_t	l2_filter_id_hint;
-} __attribute__((packed));
-
-/* hwrm_cfa_l2_filter_alloc_output (size:192b/24B) */
-struct hwrm_cfa_l2_filter_alloc_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/*
-	 * This value identifies a set of CFA data structures used for an L2
-	 * context.
-	 */
-	uint64_t	l2_filter_id;
-	/*
-	 * This is the ID of the flow associated with this
-	 * filter.
-	 * This value shall be used to match and associate the
-	 * flow identifier returned in completion records.
-	 * A value of 0xFFFFFFFF shall indicate no flow id.
-	 */
-	uint32_t	flow_id;
-	uint8_t	unused_0[3];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/***************************
- * hwrm_cfa_l2_filter_free *
- ***************************/
-
-
-/* hwrm_cfa_l2_filter_free_input (size:192b/24B) */
-struct hwrm_cfa_l2_filter_free_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/*
-	 * This value identifies a set of CFA data structures used for an L2
-	 * context.
-	 */
-	uint64_t	l2_filter_id;
-} __attribute__((packed));
-
-/* hwrm_cfa_l2_filter_free_output (size:128b/16B) */
-struct hwrm_cfa_l2_filter_free_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**************************
- * hwrm_cfa_l2_filter_cfg *
- **************************/
-
-
-/* hwrm_cfa_l2_filter_cfg_input (size:320b/40B) */
-struct hwrm_cfa_l2_filter_cfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	flags;
-	/*
-	 * Enumeration denoting the RX, TX type of the resource.
-	 * This enumeration is used for resources that are similar for both
-	 * TX and RX paths of the chip.
-	 */
-	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH     UINT32_C(0x1)
-	/* tx path */
-	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX    UINT32_C(0x0)
-	/* rx path */
-	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX    UINT32_C(0x1)
-	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \
-		HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX
-	/*
-	 * Setting of this flag indicates drop action. If this flag is not set,
-	 * then it should be considered accept action.
-	 */
-	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP     UINT32_C(0x2)
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the dst_id field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID \
-		UINT32_C(0x1)
-	/*
-	 * This bit must be '1' for the new_mirror_vnic_id field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
-		UINT32_C(0x2)
-	/*
-	 * This value identifies a set of CFA data structures used for an L2
-	 * context.
-	 */
-	uint64_t	l2_filter_id;
-	/*
-	 * If set, this value shall represent the
-	 * Logical VNIC ID of the destination VNIC for the RX
-	 * path and network port id of the destination port for
-	 * the TX path.
-	 */
-	uint32_t	dst_id;
-	/*
-	 * New Logical VNIC ID of the VNIC where traffic is
-	 * mirrored.
-	 */
-	uint32_t	new_mirror_vnic_id;
-} __attribute__((packed));
-
-/* hwrm_cfa_l2_filter_cfg_output (size:128b/16B) */
-struct hwrm_cfa_l2_filter_cfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/***************************
- * hwrm_cfa_l2_set_rx_mask *
- ***************************/
-
-
-/* hwrm_cfa_l2_set_rx_mask_input (size:448b/56B) */
-struct hwrm_cfa_l2_set_rx_mask_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* VNIC ID */
-	uint32_t	vnic_id;
-	uint32_t	mask;
-	/*
-	 * When this bit is '1', the function is requested to accept
-	 * multi-cast packets specified by the multicast addr table.
-	 */
-	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST \
-		UINT32_C(0x2)
-	/*
-	 * When this bit is '1', the function is requested to accept
-	 * all multi-cast packets.
-	 */
-	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST \
-		UINT32_C(0x4)
-	/*
-	 * When this bit is '1', the function is requested to accept
-	 * broadcast packets.
-	 */
-	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST \
-		UINT32_C(0x8)
-	/*
-	 * When this bit is '1', the function is requested to be
-	 * put in the promiscuous mode.
-	 *
-	 * The HWRM should accept any function to set up
-	 * promiscuous mode.
-	 *
-	 * The HWRM shall follow the semantics below for the
-	 * promiscuous mode support.
-	 * # When partitioning is not enabled on a port
-	 * (i.e. single PF on the port), then the PF shall
-	 * be allowed to be in the promiscuous mode. When the
-	 * PF is in the promiscuous mode, then it shall
-	 * receive all host bound traffic on that port.
-	 * # When partitioning is enabled on a port
-	 * (i.e. multiple PFs per port) and a PF on that
-	 * port is in the promiscuous mode, then the PF
-	 * receives all traffic within that partition as
-	 * identified by a unique identifier for the
-	 * PF (e.g. S-Tag). If a unique outer VLAN
-	 * for the PF is specified, then the setting of
-	 * promiscuous mode on that PF shall result in the
-	 * PF receiving all host bound traffic with matching
-	 * outer VLAN.
-	 * # A VF shall can be set in the promiscuous mode.
-	 * In the promiscuous mode, the VF does not receive any
-	 * traffic unless a unique outer VLAN for the
-	 * VF is specified. If a unique outer VLAN
-	 * for the VF is specified, then the setting of
-	 * promiscuous mode on that VF shall result in the
-	 * VF receiving all host bound traffic with the
-	 * matching outer VLAN.
-	 * # The HWRM shall allow the setting of promiscuous
-	 * mode on a function independently from the
-	 * promiscuous mode settings on other functions.
-	 */
-	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS \
-		UINT32_C(0x10)
-	/*
-	 * If this flag is set, the corresponding RX
-	 * filters shall be set up to cover multicast/broadcast
-	 * filters for the outermost Layer 2 destination MAC
-	 * address field.
-	 */
-	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST \
-		UINT32_C(0x20)
-	/*
-	 * If this flag is set, the corresponding RX
-	 * filters shall be set up to cover multicast/broadcast
-	 * filters for the VLAN-tagged packets that match the
-	 * TPID and VID fields of VLAN tags in the VLAN tag
-	 * table specified in this command.
-	 */
-	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY \
-		UINT32_C(0x40)
-	/*
-	 * If this flag is set, the corresponding RX
-	 * filters shall be set up to cover multicast/broadcast
-	 * filters for non-VLAN tagged packets and VLAN-tagged
-	 * packets that match the TPID and VID fields of VLAN
-	 * tags in the VLAN tag table specified in this command.
-	 */
-	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN \
-		UINT32_C(0x80)
-	/*
-	 * If this flag is set, the corresponding RX
-	 * filters shall be set up to cover multicast/broadcast
-	 * filters for non-VLAN tagged packets and VLAN-tagged
-	 * packets matching any VLAN tag.
-	 *
-	 * If this flag is set, then the HWRM shall ignore
-	 * VLAN tags specified in vlan_tag_tbl.
-	 *
-	 * If none of vlanonly, vlan_nonvlan, and anyvlan_nonvlan
-	 * flags is set, then the HWRM shall ignore
-	 * VLAN tags specified in vlan_tag_tbl.
-	 *
-	 * The HWRM client shall set at most one flag out of
-	 * vlanonly, vlan_nonvlan, and anyvlan_nonvlan.
-	 */
-	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN \
-		UINT32_C(0x100)
-	/* This is the address for mcast address tbl. */
-	uint64_t	mc_tbl_addr;
-	/*
-	 * This value indicates how many entries in mc_tbl are valid.
-	 * Each entry is 6 bytes.
-	 */
-	uint32_t	num_mc_entries;
-	uint8_t	unused_0[4];
-	/*
-	 * This is the address for VLAN tag table.
-	 * Each VLAN entry in the table is 4 bytes of a VLAN tag
-	 * including TPID, PCP, DEI, and VID fields in network byte
-	 * order.
-	 */
-	uint64_t	vlan_tag_tbl_addr;
-	/*
-	 * This value indicates how many entries in vlan_tag_tbl are
-	 * valid. Each entry is 4 bytes.
-	 */
-	uint32_t	num_vlan_tags;
-	uint8_t	unused_1[4];
-} __attribute__((packed));
-
-/* hwrm_cfa_l2_set_rx_mask_output (size:128b/16B) */
-struct hwrm_cfa_l2_set_rx_mask_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/* hwrm_cfa_l2_set_rx_mask_cmd_err (size:64b/8B) */
-struct hwrm_cfa_l2_set_rx_mask_cmd_err {
-	/*
-	 * command specific error codes that goes to
-	 * the cmd_err field in Common HWRM Error Response.
-	 */
-	uint8_t	code;
-	/* Unknown error */
-	#define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_UNKNOWN \
-		UINT32_C(0x0)
-	/* Unable to complete operation due to conflict with Ntuple Filter */
-	#define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR \
-		UINT32_C(0x1)
-	#define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_LAST \
-		HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR
-	uint8_t	unused_0[7];
-} __attribute__((packed));
-
-/*******************************
- * hwrm_cfa_vlan_antispoof_cfg *
- *******************************/
-
-
-/* hwrm_cfa_vlan_antispoof_cfg_input (size:256b/32B) */
-struct hwrm_cfa_vlan_antispoof_cfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/*
-	 * Function ID of the function that is being configured.
-	 * Only valid for a VF FID configured by the PF.
-	 */
-	uint16_t	fid;
-	uint8_t	unused_0[2];
-	/* Number of VLAN entries in the vlan_tag_mask_tbl. */
-	uint32_t	num_vlan_entries;
-	/*
-	 * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN
-	 * antispoof table. Each table entry contains the 16-bit TPID
-	 * (0x8100 or 0x88a8 only), 16-bit VLAN ID, and a 16-bit mask,
-	 * all in network order to match hwrm_cfa_l2_set_rx_mask.
-	 * For an individual VLAN entry, the mask value should be 0xfff
-	 * for the 12-bit VLAN ID.
-	 */
-	uint64_t	vlan_tag_mask_tbl_addr;
-} __attribute__((packed));
-
-/* hwrm_cfa_vlan_antispoof_cfg_output (size:128b/16B) */
-struct hwrm_cfa_vlan_antispoof_cfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/********************************
- * hwrm_cfa_vlan_antispoof_qcfg *
- ********************************/
-
-
-/* hwrm_cfa_vlan_antispoof_qcfg_input (size:256b/32B) */
-struct hwrm_cfa_vlan_antispoof_qcfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/*
-	 * Function ID of the function that is being queried.
-	 * Only valid for a VF FID queried by the PF.
-	 */
-	uint16_t	fid;
-	uint8_t	unused_0[2];
-	/*
-	 * Maximum number of VLAN entries the firmware is allowed to DMA
-	 * to vlan_tag_mask_tbl.
-	 */
-	uint32_t	max_vlan_entries;
-	/*
-	 * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN
-	 * antispoof table to which firmware will DMA to. Each table
-	 * entry will contain the 16-bit TPID (0x8100 or 0x88a8 only),
-	 * 16-bit VLAN ID, and a 16-bit mask, all in network order to
-	 * match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry,
-	 * the mask value should be 0xfff for the 12-bit VLAN ID.
-	 */
-	uint64_t	vlan_tag_mask_tbl_addr;
-} __attribute__((packed));
-
-/* hwrm_cfa_vlan_antispoof_qcfg_output (size:128b/16B) */
-struct hwrm_cfa_vlan_antispoof_qcfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* Number of valid entries DMAd by firmware to vlan_tag_mask_tbl. */
-	uint32_t	num_vlan_entries;
-	uint8_t	unused_0[3];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/********************************
- * hwrm_cfa_tunnel_filter_alloc *
- ********************************/
-
-
-/* hwrm_cfa_tunnel_filter_alloc_input (size:704b/88B) */
-struct hwrm_cfa_tunnel_filter_alloc_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	flags;
-	/* Setting of this flag indicates the applicability to the loopback path. */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
-		UINT32_C(0x1)
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the l2_filter_id field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
-		UINT32_C(0x1)
-	/*
-	 * This bit must be '1' for the l2_addr field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \
-		UINT32_C(0x2)
-	/*
-	 * This bit must be '1' for the l2_ivlan field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \
-		UINT32_C(0x4)
-	/*
-	 * This bit must be '1' for the l3_addr field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR \
-		UINT32_C(0x8)
-	/*
-	 * This bit must be '1' for the l3_addr_type field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR_TYPE \
-		UINT32_C(0x10)
-	/*
-	 * This bit must be '1' for the t_l3_addr_type field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR_TYPE \
-		UINT32_C(0x20)
-	/*
-	 * This bit must be '1' for the t_l3_addr field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR \
-		UINT32_C(0x40)
-	/*
-	 * This bit must be '1' for the tunnel_type field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
-		UINT32_C(0x80)
-	/*
-	 * This bit must be '1' for the vni field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_VNI \
-		UINT32_C(0x100)
-	/*
-	 * This bit must be '1' for the dst_vnic_id field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_DST_VNIC_ID \
-		UINT32_C(0x200)
-	/*
-	 * This bit must be '1' for the mirror_vnic_id field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
-		UINT32_C(0x400)
-	/*
-	 * This value identifies a set of CFA data structures used for an L2
-	 * context.
-	 */
-	uint64_t	l2_filter_id;
-	/*
-	 * This value sets the match value for the inner L2
-	 * MAC address.
-	 * Destination MAC address for RX path.
-	 * Source MAC address for TX path.
-	 */
-	uint8_t	l2_addr[6];
-	/*
-	 * This value sets VLAN ID value for inner VLAN.
-	 * Only 12-bits of VLAN ID are used in setting the filter.
-	 */
-	uint16_t	l2_ivlan;
-	/*
-	 * The value of inner destination IP address to be used in filtering.
-	 * For IPv4, first four bytes represent the IP address.
-	 */
-	uint32_t	l3_addr[4];
-	/*
-	 * The value of tunnel destination IP address to be used in filtering.
-	 * For IPv4, first four bytes represent the IP address.
-	 */
-	uint32_t	t_l3_addr[4];
-	/*
-	 * This value indicates the type of inner IP address.
-	 * 4 - IPv4
-	 * 6 - IPv6
-	 * All others are invalid.
-	 */
-	uint8_t	l3_addr_type;
-	/*
-	 * This value indicates the type of tunnel IP address.
-	 * 4 - IPv4
-	 * 6 - IPv6
-	 * All others are invalid.
-	 */
-	uint8_t	t_l3_addr_type;
-	/* Tunnel Type. */
-	uint8_t	tunnel_type;
-	/* Non-tunnel */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
-		UINT32_C(0x0)
-	/* Virtual eXtensible Local Area Network (VXLAN) */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
-		UINT32_C(0x1)
-	/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
-		UINT32_C(0x2)
-	/* Generic Routing Encapsulation (GRE) inside Ethernet payload */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
-		UINT32_C(0x3)
-	/* IP in IP */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
-		UINT32_C(0x4)
-	/* Generic Network Virtualization Encapsulation (Geneve) */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
-		UINT32_C(0x5)
-	/* Multi-Protocol Lable Switching (MPLS) */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
-		UINT32_C(0x6)
-	/* Stateless Transport Tunnel (STT) */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
-		UINT32_C(0x7)
-	/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
-		UINT32_C(0x8)
-	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
-		UINT32_C(0x9)
-	/* Any tunneled traffic */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
-		UINT32_C(0xff)
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
-		HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
-	/*
-	 * tunnel_flags allows the user to indicate the tunnel tag detection
-	 * for the tunnel type specified in tunnel_type.
-	 */
-	uint8_t	tunnel_flags;
-	/*
-	 * If the tunnel_type is geneve, then this bit indicates if we
-	 * need to match the geneve OAM packet.
-	 * If the tunnel_type is nvgre or gre, then this bit indicates if
-	 * we need to detect checksum present bit in geneve header.
-	 * If the tunnel_type is mpls, then this bit indicates if we need
-	 * to match mpls packet with explicit IPV4/IPV6 null header.
-	 */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_OAM_CHECKSUM_EXPLHDR \
-		UINT32_C(0x1)
-	/*
-	 * If the tunnel_type is geneve, then this bit indicates if we
-	 * need to detect the critical option bit set in the oam packet.
-	 * If the tunnel_type is nvgre or gre, then this bit indicates
-	 * if we need to match nvgre packets with key present bit set in
-	 * gre header.
-	 * If the tunnel_type is mpls, then this bit indicates if we
-	 * need to match mpls packet with S bit from inner/second label.
-	 */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_CRITICAL_OPT_S1 \
-		UINT32_C(0x2)
-	/*
-	 * If the tunnel_type is geneve, then this bit indicates if we
-	 * need to match geneve packet with extended header bit set in
-	 * geneve header.
-	 * If the tunnel_type is nvgre or gre, then this bit indicates
-	 * if we need to match nvgre packets with sequence number
-	 * present bit set in gre header.
-	 * If the tunnel_type is mpls, then this bit indicates if we
-	 * need to match mpls packet with S bit from out/first label.
-	 */
-	#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_EXTHDR_SEQNUM_S0 \
-		UINT32_C(0x4)
-	/*
-	 * Virtual Network Identifier (VNI). Only valid with
-	 * tunnel_types VXLAN, NVGRE, and Geneve.
-	 * Only lower 24-bits of VNI field are used
-	 * in setting up the filter.
-	 */
-	uint32_t	vni;
-	/* Logical VNIC ID of the destination VNIC. */
-	uint32_t	dst_vnic_id;
-	/*
-	 * Logical VNIC ID of the VNIC where traffic is
-	 * mirrored.
-	 */
-	uint32_t	mirror_vnic_id;
-} __attribute__((packed));
-
-/* hwrm_cfa_tunnel_filter_alloc_output (size:192b/24B) */
-struct hwrm_cfa_tunnel_filter_alloc_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* This value is an opaque id into CFA data structures. */
-	uint64_t	tunnel_filter_id;
-	/*
-	 * This is the ID of the flow associated with this
-	 * filter.
-	 * This value shall be used to match and associate the
-	 * flow identifier returned in completion records.
-	 * A value of 0xFFFFFFFF shall indicate no flow id.
-	 */
-	uint32_t	flow_id;
-	uint8_t	unused_0[3];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/*******************************
- * hwrm_cfa_tunnel_filter_free *
- *******************************/
-
-
-/* hwrm_cfa_tunnel_filter_free_input (size:192b/24B) */
-struct hwrm_cfa_tunnel_filter_free_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* This value is an opaque id into CFA data structures. */
-	uint64_t	tunnel_filter_id;
-} __attribute__((packed));
-
-/* hwrm_cfa_tunnel_filter_free_output (size:128b/16B) */
-struct hwrm_cfa_tunnel_filter_free_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/***************************************
- * hwrm_cfa_redirect_tunnel_type_alloc *
- ***************************************/
-
-
-/* hwrm_cfa_redirect_tunnel_type_alloc_input (size:192b/24B) */
-struct hwrm_cfa_redirect_tunnel_type_alloc_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* The destination function id, to whom the traffic is redirected. */
-	uint16_t	dest_fid;
-	/* Tunnel Type. */
-	uint8_t	tunnel_type;
-	/* Non-tunnel */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
-		UINT32_C(0x0)
-	/* Virtual eXtensible Local Area Network (VXLAN) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
-		UINT32_C(0x1)
-	/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
-		UINT32_C(0x2)
-	/* Generic Routing Encapsulation (GRE) inside Ethernet payload */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
-		UINT32_C(0x3)
-	/* IP in IP */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
-		UINT32_C(0x4)
-	/* Generic Network Virtualization Encapsulation (Geneve) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
-		UINT32_C(0x5)
-	/* Multi-Protocol Lable Switching (MPLS) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
-		UINT32_C(0x6)
-	/* Stateless Transport Tunnel (STT) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_STT \
-		UINT32_C(0x7)
-	/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
-		UINT32_C(0x8)
-	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
-		UINT32_C(0x9)
-	/* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
-		UINT32_C(0xa)
-	/* Any tunneled traffic */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
-		UINT32_C(0xff)
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_LAST \
-		HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
-	/* Tunnel alloc flags. */
-	uint8_t	flags;
-	/* Setting of this flag indicates modify existing redirect tunnel to new destination function ID. */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_FLAGS_MODIFY_DST \
-		UINT32_C(0x1)
-	uint8_t	unused_0[4];
-} __attribute__((packed));
-
-/* hwrm_cfa_redirect_tunnel_type_alloc_output (size:128b/16B) */
-struct hwrm_cfa_redirect_tunnel_type_alloc_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**************************************
- * hwrm_cfa_redirect_tunnel_type_free *
- **************************************/
-
-
-/* hwrm_cfa_redirect_tunnel_type_free_input (size:192b/24B) */
-struct hwrm_cfa_redirect_tunnel_type_free_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* The destination function id, to whom the traffic is redirected. */
-	uint16_t	dest_fid;
-	/* Tunnel Type. */
-	uint8_t	tunnel_type;
-	/* Non-tunnel */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NONTUNNEL \
-		UINT32_C(0x0)
-	/* Virtual eXtensible Local Area Network (VXLAN) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN \
-		UINT32_C(0x1)
-	/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NVGRE \
-		UINT32_C(0x2)
-	/* Generic Routing Encapsulation (GRE) inside Ethernet payload */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_L2GRE \
-		UINT32_C(0x3)
-	/* IP in IP */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPIP \
-		UINT32_C(0x4)
-	/* Generic Network Virtualization Encapsulation (Geneve) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_GENEVE \
-		UINT32_C(0x5)
-	/* Multi-Protocol Lable Switching (MPLS) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_MPLS \
-		UINT32_C(0x6)
-	/* Stateless Transport Tunnel (STT) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_STT \
-		UINT32_C(0x7)
-	/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE \
-		UINT32_C(0x8)
-	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \
-		UINT32_C(0x9)
-	/* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \
-		UINT32_C(0xa)
-	/* Any tunneled traffic */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL \
-		UINT32_C(0xff)
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_LAST \
-		HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL
-	uint8_t	unused_0[5];
-} __attribute__((packed));
-
-/* hwrm_cfa_redirect_tunnel_type_free_output (size:128b/16B) */
-struct hwrm_cfa_redirect_tunnel_type_free_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**************************************
- * hwrm_cfa_redirect_tunnel_type_info *
- **************************************/
-
-
-/* hwrm_cfa_redirect_tunnel_type_info_input (size:192b/24B) */
-struct hwrm_cfa_redirect_tunnel_type_info_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* The source function id. */
-	uint16_t	src_fid;
-	/* Tunnel Type. */
-	uint8_t	tunnel_type;
-	/* Non-tunnel */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NONTUNNEL \
+	/* Transmission Selection Algorithm (TSA) for CoS Queue. */
+	uint8_t	queue_id7_tsa_assign;
+	/* Strict Priority */
+	#define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_SP \
 		UINT32_C(0x0)
-	/* Virtual eXtensible Local Area Network (VXLAN) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN \
+	/* Enhanced Transmission Selection */
+	#define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_ETS \
 		UINT32_C(0x1)
-	/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NVGRE \
-		UINT32_C(0x2)
-	/* Generic Routing Encapsulation (GRE) inside Ethernet payload */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_L2GRE \
-		UINT32_C(0x3)
-	/* IP in IP */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPIP \
-		UINT32_C(0x4)
-	/* Generic Network Virtualization Encapsulation (Geneve) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_GENEVE \
-		UINT32_C(0x5)
-	/* Multi-Protocol Lable Switching (MPLS) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_MPLS \
-		UINT32_C(0x6)
-	/* Stateless Transport Tunnel (STT) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_STT \
-		UINT32_C(0x7)
-	/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE \
-		UINT32_C(0x8)
-	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN_V4 \
-		UINT32_C(0x9)
-	/* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE_V1 \
-		UINT32_C(0xa)
-	/* Any tunneled traffic */
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL \
-		UINT32_C(0xff)
-	#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_LAST \
-		HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL
-	uint8_t	unused_0[5];
-} __attribute__((packed));
-
-/* hwrm_cfa_redirect_tunnel_type_info_output (size:128b/16B) */
-struct hwrm_cfa_redirect_tunnel_type_info_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* The destination function id, to whom the traffic is redirected. */
-	uint16_t	dest_fid;
-	uint8_t	unused_0[5];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/* hwrm_vxlan_ipv4_hdr (size:128b/16B) */
-struct hwrm_vxlan_ipv4_hdr {
-	/* IPv4 version and header length. */
-	uint8_t	ver_hlen;
-	/* IPv4 header length */
-	#define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_MASK UINT32_C(0xf)
-	#define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_SFT 0
-	/* Version */
-	#define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_MASK      UINT32_C(0xf0)
-	#define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_SFT       4
-	/* IPv4 type of service. */
-	uint8_t	tos;
-	/* IPv4 identification. */
-	uint16_t	ip_id;
-	/* IPv4 flags and offset. */
-	uint16_t	flags_frag_offset;
-	/* IPv4 TTL. */
-	uint8_t	ttl;
-	/* IPv4 protocol. */
-	uint8_t	protocol;
-	/* IPv4 source address. */
-	uint32_t	src_ip_addr;
-	/* IPv4 destination address. */
-	uint32_t	dest_ip_addr;
-} __attribute__((packed));
-
-/* hwrm_vxlan_ipv6_hdr (size:320b/40B) */
-struct hwrm_vxlan_ipv6_hdr {
-	/* IPv6 version, traffic class and flow label. */
-	uint32_t	ver_tc_flow_label;
-	/* IPv6 version shift */
-	#define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_SFT \
-		UINT32_C(0x1c)
-	/* IPv6 version mask */
-	#define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_MASK \
-		UINT32_C(0xf0000000)
-	/* IPv6 TC shift */
-	#define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_SFT \
-		UINT32_C(0x14)
-	/* IPv6 TC mask */
-	#define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_MASK \
-		UINT32_C(0xff00000)
-	/* IPv6 flow label shift */
-	#define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_SFT \
-		UINT32_C(0x0)
-	/* IPv6 flow label mask */
-	#define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK \
-		UINT32_C(0xfffff)
-	#define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_LAST \
-		HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK
-	/* IPv6 payload length. */
-	uint16_t	payload_len;
-	/* IPv6 next header. */
-	uint8_t	next_hdr;
-	/* IPv6 TTL. */
-	uint8_t	ttl;
-	/* IPv6 source address. */
-	uint32_t	src_ip_addr[4];
-	/* IPv6 destination address. */
-	uint32_t	dest_ip_addr[4];
-} __attribute__((packed));
-
-/* hwrm_cfa_encap_data_vxlan (size:576b/72B) */
-struct hwrm_cfa_encap_data_vxlan {
-	/* Source MAC address. */
-	uint8_t	src_mac_addr[6];
 	/* reserved. */
-	uint16_t	unused_0;
-	/* Destination MAC address. */
-	uint8_t	dst_mac_addr[6];
-	/* Number of VLAN tags. */
-	uint8_t	num_vlan_tags;
+	#define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST \
+		UINT32_C(0x2)
 	/* reserved. */
-	uint8_t	unused_1;
-	/* Outer VLAN TPID. */
-	uint16_t	ovlan_tpid;
-	/* Outer VLAN TCI. */
-	uint16_t	ovlan_tci;
-	/* Inner VLAN TPID. */
-	uint16_t	ivlan_tpid;
-	/* Inner VLAN TCI. */
-	uint16_t	ivlan_tci;
-	/* L3 header fields. */
-	uint32_t	l3[10];
-	/* IP version mask. */
-	#define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_MASK UINT32_C(0xf)
-	/* IP version 4. */
-	#define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV4 UINT32_C(0x4)
-	/* IP version 6. */
-	#define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6 UINT32_C(0x6)
-	#define HWRM_CFA_ENCAP_DATA_VXLAN_L3_LAST \
-		HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6
-	/* UDP source port. */
-	uint16_t	src_port;
-	/* UDP destination port. */
-	uint16_t	dst_port;
-	/* VXLAN Network Identifier. */
-	uint32_t	vni;
-} __attribute__((packed));
-
-/*******************************
- * hwrm_cfa_encap_record_alloc *
- *******************************/
-
-
-/* hwrm_cfa_encap_record_alloc_input (size:832b/104B) */
-struct hwrm_cfa_encap_record_alloc_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
+	#define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST \
+		UINT32_C(0xff)
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * Priority level for strict priority. Valid only when the
+	 * tsa_assign is 0 - Strict Priority (SP)
+	 * 0..7 - Valid values.
+	 * 8..255 - Reserved.
 	 */
-	uint16_t	target_id;
+	uint8_t	queue_id7_pri_lvl;
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * Weight used to allocate remaining BW for this COS after
+	 * servicing guaranteed bandwidths for all COS.
 	 */
-	uint64_t	resp_addr;
-	uint32_t	flags;
-	/* Setting of this flag indicates the applicability to the loopback path. */
-	#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_LOOPBACK \
-		UINT32_C(0x1)
-	/* Encapsulation Type. */
-	uint8_t	encap_type;
-	/* Virtual eXtensible Local Area Network (VXLAN) */
-	#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN \
-		UINT32_C(0x1)
-	/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
-	#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_NVGRE \
-		UINT32_C(0x2)
-	/* Generic Routing Encapsulation (GRE) after inside Ethernet payload */
-	#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2GRE \
-		UINT32_C(0x3)
-	/* IP in IP */
-	#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPIP \
-		UINT32_C(0x4)
-	/* Generic Network Virtualization Encapsulation (Geneve) */
-	#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_GENEVE \
-		UINT32_C(0x5)
-	/* Multi-Protocol Lable Switching (MPLS) */
-	#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_MPLS \
-		UINT32_C(0x6)
-	/* VLAN */
-	#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VLAN \
-		UINT32_C(0x7)
-	/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
-	#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE \
-		UINT32_C(0x8)
-	#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_LAST \
-		HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE
-	uint8_t	unused_0[3];
-	/* This value is encap data used for the given encap type. */
-	uint32_t	encap_data[20];
+	uint8_t	queue_id7_bw_weight;
+	uint8_t	unused_1[5];
 } __attribute__((packed));
 
-/* hwrm_cfa_encap_record_alloc_output (size:128b/16B) */
-struct hwrm_cfa_encap_record_alloc_output {
+/* hwrm_queue_cos2bw_cfg_output (size:128b/16B) */
+struct hwrm_queue_cos2bw_cfg_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -21651,9 +15274,7 @@ struct hwrm_cfa_encap_record_alloc_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* This value is an opaque id into CFA data structures. */
-	uint32_t	encap_record_id;
-	uint8_t	unused_0[3];
+	uint8_t	unused_0[7];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -21664,13 +15285,13 @@ struct hwrm_cfa_encap_record_alloc_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/******************************
- * hwrm_cfa_encap_record_free *
- ******************************/
+/*******************
+ * hwrm_vnic_alloc *
+ *******************/
 
 
-/* hwrm_cfa_encap_record_free_input (size:192b/24B) */
-struct hwrm_cfa_encap_record_free_input {
+/* hwrm_vnic_alloc_input (size:192b/24B) */
+struct hwrm_vnic_alloc_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -21698,13 +15319,17 @@ struct hwrm_cfa_encap_record_free_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	/* This value is an opaque id into CFA data structures. */
-	uint32_t	encap_record_id;
+	uint32_t	flags;
+	/*
+	 * When this bit is '1', this VNIC is requested to
+	 * be the default VNIC for this function.
+	 */
+	#define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT     UINT32_C(0x1)
 	uint8_t	unused_0[4];
 } __attribute__((packed));
 
-/* hwrm_cfa_encap_record_free_output (size:128b/16B) */
-struct hwrm_cfa_encap_record_free_output {
+/* hwrm_vnic_alloc_output (size:128b/16B) */
+struct hwrm_vnic_alloc_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -21713,7 +15338,9 @@ struct hwrm_cfa_encap_record_free_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	uint8_t	unused_0[7];
+	/* Logical vnic ID */
+	uint32_t	vnic_id;
+	uint8_t	unused_0[3];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -21724,350 +15351,262 @@ struct hwrm_cfa_encap_record_free_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/********************************
- * hwrm_cfa_ntuple_filter_alloc *
- ********************************/
-
-
-/* hwrm_cfa_ntuple_filter_alloc_input (size:1024b/128B) */
-struct hwrm_cfa_ntuple_filter_alloc_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint32_t	flags;
-	/* Setting of this flag indicates the applicability to the loopback path. */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
-		UINT32_C(0x1)
-	/*
-	 * Setting of this flag indicates drop action. If this flag is not set,
-	 * then it should be considered accept action.
-	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP \
-		UINT32_C(0x2)
-	/*
-	 * Setting of this flag indicates that a meter is expected to be attached
-	 * to this flow. This hint can be used when choosing the action record
-	 * format required for the flow.
-	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER \
-		UINT32_C(0x4)
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the l2_filter_id field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
-		UINT32_C(0x1)
-	/*
-	 * This bit must be '1' for the ethertype field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \
-		UINT32_C(0x2)
-	/*
-	 * This bit must be '1' for the tunnel_type field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
-		UINT32_C(0x4)
-	/*
-	 * This bit must be '1' for the src_macaddr field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \
-		UINT32_C(0x8)
-	/*
-	 * This bit must be '1' for the ipaddr_type field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
-		UINT32_C(0x10)
-	/*
-	 * This bit must be '1' for the src_ipaddr field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \
-		UINT32_C(0x20)
-	/*
-	 * This bit must be '1' for the src_ipaddr_mask field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR_MASK \
-		UINT32_C(0x40)
-	/*
-	 * This bit must be '1' for the dst_ipaddr field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \
-		UINT32_C(0x80)
-	/*
-	 * This bit must be '1' for the dst_ipaddr_mask field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR_MASK \
-		UINT32_C(0x100)
-	/*
-	 * This bit must be '1' for the ip_protocol field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
-		UINT32_C(0x200)
+/******************
+ * hwrm_vnic_free *
+ ******************/
+
+
+/* hwrm_vnic_free_input (size:192b/24B) */
+struct hwrm_vnic_free_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
 	/*
-	 * This bit must be '1' for the src_port field to be
-	 * configured.
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
 	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \
-		UINT32_C(0x400)
+	uint16_t	cmpl_ring;
 	/*
-	 * This bit must be '1' for the src_port_mask field to be
-	 * configured.
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT_MASK \
-		UINT32_C(0x800)
+	uint16_t	seq_id;
 	/*
-	 * This bit must be '1' for the dst_port field to be
-	 * configured.
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
 	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \
-		UINT32_C(0x1000)
+	uint16_t	target_id;
 	/*
-	 * This bit must be '1' for the dst_port_mask field to be
-	 * configured.
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT_MASK \
-		UINT32_C(0x2000)
+	uint64_t	resp_addr;
+	/* Logical vnic ID */
+	uint32_t	vnic_id;
+	uint8_t	unused_0[4];
+} __attribute__((packed));
+
+/* hwrm_vnic_free_output (size:128b/16B) */
+struct hwrm_vnic_free_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	uint8_t	unused_0[7];
 	/*
-	 * This bit must be '1' for the pri_hint field to be
-	 * configured.
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
 	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_PRI_HINT \
-		UINT32_C(0x4000)
+	uint8_t	valid;
+} __attribute__((packed));
+
+/*****************
+ * hwrm_vnic_cfg *
+ *****************/
+
+
+/* hwrm_vnic_cfg_input (size:320b/40B) */
+struct hwrm_vnic_cfg_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
 	/*
-	 * This bit must be '1' for the ntuple_filter_id field to be
-	 * configured.
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
 	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_NTUPLE_FILTER_ID \
-		UINT32_C(0x8000)
+	uint16_t	cmpl_ring;
 	/*
-	 * This bit must be '1' for the dst_id field to be
-	 * configured.
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
-		UINT32_C(0x10000)
+	uint16_t	seq_id;
 	/*
-	 * This bit must be '1' for the mirror_vnic_id field to be
-	 * configured.
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
 	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
-		UINT32_C(0x20000)
+	uint16_t	target_id;
 	/*
-	 * This bit must be '1' for the dst_macaddr field to be
-	 * configured.
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \
-		UINT32_C(0x40000)
+	uint64_t	resp_addr;
+	uint32_t	flags;
 	/*
-	 * This value identifies a set of CFA data structures used for an L2
-	 * context.
+	 * When this bit is '1', the VNIC is requested to
+	 * be the default VNIC for the function.
 	 */
-	uint64_t	l2_filter_id;
+	#define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT \
+		UINT32_C(0x1)
 	/*
-	 * This value indicates the source MAC address in
-	 * the Ethernet header.
+	 * When this bit is '1', the VNIC is being configured to
+	 * strip VLAN in the RX path.
+	 * If set to '0', then VLAN stripping is disabled on
+	 * this VNIC.
 	 */
-	uint8_t	src_macaddr[6];
-	/* This value indicates the ethertype in the Ethernet header. */
-	uint16_t	ethertype;
+	#define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE \
+		UINT32_C(0x2)
 	/*
-	 * This value indicates the type of IP address.
-	 * 4 - IPv4
-	 * 6 - IPv6
-	 * All others are invalid.
+	 * When this bit is '1', the VNIC is being configured to
+	 * buffer receive packets in the hardware until the host
+	 * posts new receive buffers.
+	 * If set to '0', then bd_stall is being configured to be
+	 * disabled on this VNIC.
 	 */
-	uint8_t	ip_addr_type;
-	/* invalid */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \
-		UINT32_C(0x0)
-	/* IPv4 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \
+	#define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE \
 		UINT32_C(0x4)
-	/* IPv6 */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \
-		UINT32_C(0x6)
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
-		HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
 	/*
-	 * The value of protocol filed in IP header.
-	 * Applies to UDP and TCP traffic.
-	 * 6 - TCP
-	 * 17 - UDP
+	 * When this bit is '1', the VNIC is being configured to
+	 * receive both RoCE and non-RoCE traffic.
+	 * If set to '0', then this VNIC is not configured to be
+	 * operating in dual VNIC mode.
 	 */
-	uint8_t	ip_protocol;
-	/* invalid */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \
-		UINT32_C(0x0)
-	/* TCP */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \
-		UINT32_C(0x6)
-	/* UDP */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \
-		UINT32_C(0x11)
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \
-		HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP
+	#define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE \
+		UINT32_C(0x8)
 	/*
-	 * If set, this value shall represent the
-	 * Logical VNIC ID of the destination VNIC for the RX
-	 * path and network port id of the destination port for
-	 * the TX path.
+	 * When this flag is set to '1', the VNIC is requested to
+	 * be configured to receive only RoCE traffic.
+	 * If this flag is set to '0', then this flag shall be
+	 * ignored by the HWRM.
+	 * If roce_dual_vnic_mode flag is set to '1'
+	 * or roce_mirroring_capable_vnic_mode flag to 1,
+	 * then the HWRM client shall not set this flag to '1'.
 	 */
-	uint16_t	dst_id;
+	#define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE \
+		UINT32_C(0x10)
 	/*
-	 * Logical VNIC ID of the VNIC where traffic is
-	 * mirrored.
+	 * When a VNIC uses one destination ring group for certain
+	 * application (e.g. Receive Flow Steering) where
+	 * exact match is used to direct packets to a VNIC with one
+	 * destination ring group only, there is no need to configure
+	 * RSS indirection table for that VNIC as only one destination
+	 * ring group is used.
+	 *
+	 * This flag is used to enable a mode where
+	 * RSS is enabled in the VNIC using a RSS context
+	 * for computing RSS hash but the RSS indirection table is
+	 * not configured using hwrm_vnic_rss_cfg.
+	 *
+	 * If this mode is enabled, then the driver should not program
+	 * RSS indirection table for the RSS context that is used for
+	 * computing RSS hash only.
 	 */
-	uint16_t	mirror_vnic_id;
+	#define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE \
+		UINT32_C(0x20)
 	/*
-	 * This value indicates the tunnel type for this filter.
-	 * If this field is not specified, then the filter shall
-	 * apply to both non-tunneled and tunneled packets.
-	 * If this field conflicts with the tunnel_type specified
-	 * in the l2_filter_id, then the HWRM shall return an
-	 * error for this command.
+	 * When this bit is '1', the VNIC is being configured to
+	 * receive both RoCE and non-RoCE traffic, but forward only the
+	 * RoCE traffic further. Also, RoCE traffic can be mirrored to
+	 * L2 driver.
 	 */
-	uint8_t	tunnel_type;
-	/* Non-tunnel */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
-		UINT32_C(0x0)
-	/* Virtual eXtensible Local Area Network (VXLAN) */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
-		UINT32_C(0x1)
-	/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
-		UINT32_C(0x2)
-	/* Generic Routing Encapsulation (GRE) inside Ethernet payload */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
-		UINT32_C(0x3)
-	/* IP in IP */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
-		UINT32_C(0x4)
-	/* Generic Network Virtualization Encapsulation (Geneve) */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
-		UINT32_C(0x5)
-	/* Multi-Protocol Lable Switching (MPLS) */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
-		UINT32_C(0x6)
-	/* Stateless Transport Tunnel (STT) */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
-		UINT32_C(0x7)
-	/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
-		UINT32_C(0x8)
-	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
-		UINT32_C(0x9)
-	/* Any tunneled traffic */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
-		UINT32_C(0xff)
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
-		HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
+	#define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
+		UINT32_C(0x40)
+	uint32_t	enables;
 	/*
-	 * This hint is provided to help in placing
-	 * the filter in the filter table.
+	 * This bit must be '1' for the dflt_ring_grp field to be
+	 * configured.
 	 */
-	uint8_t	pri_hint;
-	/* No preference */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
-		UINT32_C(0x0)
-	/* Above the given filter */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE \
+	#define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP \
 		UINT32_C(0x1)
-	/* Below the given filter */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_BELOW \
+	/*
+	 * This bit must be '1' for the rss_rule field to be
+	 * configured.
+	 */
+	#define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE \
 		UINT32_C(0x2)
-	/* As high as possible */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_HIGHEST \
-		UINT32_C(0x3)
-	/* As low as possible */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST \
+	/*
+	 * This bit must be '1' for the cos_rule field to be
+	 * configured.
+	 */
+	#define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE \
 		UINT32_C(0x4)
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LAST \
-		HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST
 	/*
-	 * The value of source IP address to be used in filtering.
-	 * For IPv4, first four bytes represent the IP address.
+	 * This bit must be '1' for the lb_rule field to be
+	 * configured.
 	 */
-	uint32_t	src_ipaddr[4];
+	#define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE \
+		UINT32_C(0x8)
 	/*
-	 * The value of source IP address mask to be used in
-	 * filtering.
-	 * For IPv4, first four bytes represent the IP address mask.
+	 * This bit must be '1' for the mru field to be
+	 * configured.
 	 */
-	uint32_t	src_ipaddr_mask[4];
+	#define HWRM_VNIC_CFG_INPUT_ENABLES_MRU \
+		UINT32_C(0x10)
 	/*
-	 * The value of destination IP address to be used in filtering.
-	 * For IPv4, first four bytes represent the IP address.
+	 * This bit must be '1' for the default_rx_ring_id field to be
+	 * configured.
 	 */
-	uint32_t	dst_ipaddr[4];
+	#define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_RX_RING_ID \
+		UINT32_C(0x20)
 	/*
-	 * The value of destination IP address mask to be used in
-	 * filtering.
-	 * For IPv4, first four bytes represent the IP address mask.
+	 * This bit must be '1' for the default_cmpl_ring_id field to be
+	 * configured.
 	 */
-	uint32_t	dst_ipaddr_mask[4];
+	#define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_CMPL_RING_ID \
+		UINT32_C(0x40)
+	/* Logical vnic ID */
+	uint16_t	vnic_id;
 	/*
-	 * The value of source port to be used in filtering.
-	 * Applies to UDP and TCP traffic.
+	 * Default Completion ring for the VNIC.  This ring will
+	 * be chosen if packet does not match any RSS rules and if
+	 * there is no COS rule.
 	 */
-	uint16_t	src_port;
+	uint16_t	dflt_ring_grp;
 	/*
-	 * The value of source port mask to be used in filtering.
-	 * Applies to UDP and TCP traffic.
+	 * RSS ID for RSS rule/table structure.  0xFF... (All Fs) if
+	 * there is no RSS rule.
 	 */
-	uint16_t	src_port_mask;
+	uint16_t	rss_rule;
 	/*
-	 * The value of destination port to be used in filtering.
-	 * Applies to UDP and TCP traffic.
+	 * RSS ID for COS rule/table structure.  0xFF... (All Fs) if
+	 * there is no COS rule.
 	 */
-	uint16_t	dst_port;
+	uint16_t	cos_rule;
 	/*
-	 * The value of destination port mask to be used in
-	 * filtering.
-	 * Applies to UDP and TCP traffic.
+	 * RSS ID for load balancing rule/table structure.
+	 * 0xFF... (All Fs) if there is no LB rule.
 	 */
-	uint16_t	dst_port_mask;
+	uint16_t	lb_rule;
 	/*
-	 * This is the ID of the filter that goes along with
-	 * the pri_hint.
+	 * The maximum receive unit of the vnic.
+	 * Each vnic is associated with a function.
+	 * The vnic mru value overwrites the mru setting of the
+	 * associated function.
+	 * The HWRM shall make sure that vnic mru does not exceed
+	 * the mru of the port the function is associated with.
 	 */
-	uint64_t	ntuple_filter_id_hint;
+	uint16_t	mru;
+	/*
+	 * Default Rx ring for the VNIC.  This ring will
+	 * be chosen if packet does not match any RSS rules.
+	 * The aggregation ring associated with the Rx ring is
+	 * implied based on the Rx ring specified when the
+	 * aggregation ring was allocated.
+	 */
+	uint16_t	default_rx_ring_id;
+	/*
+	 * Default completion ring for the VNIC.  This ring will
+	 * be chosen if packet does not match any RSS rules.
+	 */
+	uint16_t	default_cmpl_ring_id;
 } __attribute__((packed));
 
-/* hwrm_cfa_ntuple_filter_alloc_output (size:192b/24B) */
-struct hwrm_cfa_ntuple_filter_alloc_output {
+/* hwrm_vnic_cfg_output (size:128b/16B) */
+struct hwrm_vnic_cfg_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -22076,17 +15615,7 @@ struct hwrm_cfa_ntuple_filter_alloc_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* This value is an opaque id into CFA data structures. */
-	uint64_t	ntuple_filter_id;
-	/*
-	 * This is the ID of the flow associated with this
-	 * filter.
-	 * This value shall be used to match and associate the
-	 * flow identifier returned in completion records.
-	 * A value of 0xFFFFFFFF shall indicate no flow id.
-	 */
-	uint32_t	flow_id;
-	uint8_t	unused_0[3];
+	uint8_t	unused_0[7];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -22097,31 +15626,13 @@ struct hwrm_cfa_ntuple_filter_alloc_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/* hwrm_cfa_ntuple_filter_alloc_cmd_err (size:64b/8B) */
-struct hwrm_cfa_ntuple_filter_alloc_cmd_err {
-	/*
-	 * command specific error codes that goes to
-	 * the cmd_err field in Common HWRM Error Response.
-	 */
-	uint8_t	code;
-	/* Unknown error */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_UNKNOWN \
-		UINT32_C(0x0)
-	/* Unable to complete operation due to conflict with Rx Mask VLAN */
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR \
-		UINT32_C(0x1)
-	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_LAST \
-		HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR
-	uint8_t	unused_0[7];
-} __attribute__((packed));
-
-/*******************************
- * hwrm_cfa_ntuple_filter_free *
- *******************************/
+/******************
+ * hwrm_vnic_qcfg *
+ ******************/
 
 
-/* hwrm_cfa_ntuple_filter_free_input (size:192b/24B) */
-struct hwrm_cfa_ntuple_filter_free_input {
+/* hwrm_vnic_qcfg_input (size:256b/32B) */
+struct hwrm_vnic_qcfg_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -22141,29 +15652,125 @@ struct hwrm_cfa_ntuple_filter_free_input {
 	 * * 0xFFF8-0xFFFE - Reserved for internal processors
 	 * * 0xFFFF - HWRM
 	 */
-	uint16_t	target_id;
+	uint16_t	target_id;
+	/*
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
+	 */
+	uint64_t	resp_addr;
+	uint32_t	enables;
+	/*
+	 * This bit must be '1' for the vf_id_valid field to be
+	 * configured.
+	 */
+	#define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID     UINT32_C(0x1)
+	/* Logical vnic ID */
+	uint32_t	vnic_id;
+	/* ID of Virtual Function whose VNIC resource is being queried. */
+	uint16_t	vf_id;
+	uint8_t	unused_0[6];
+} __attribute__((packed));
+
+/* hwrm_vnic_qcfg_output (size:256b/32B) */
+struct hwrm_vnic_qcfg_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	/* Default Completion ring for the VNIC. */
+	uint16_t	dflt_ring_grp;
+	/*
+	 * RSS ID for RSS rule/table structure.  0xFF... (All Fs) if
+	 * there is no RSS rule.
+	 */
+	uint16_t	rss_rule;
+	/*
+	 * RSS ID for COS rule/table structure.  0xFF... (All Fs) if
+	 * there is no COS rule.
+	 */
+	uint16_t	cos_rule;
+	/*
+	 * RSS ID for load balancing rule/table structure.
+	 * 0xFF... (All Fs) if there is no LB rule.
+	 */
+	uint16_t	lb_rule;
+	/* The maximum receive unit of the vnic. */
+	uint16_t	mru;
+	uint8_t	unused_0[2];
+	uint32_t	flags;
+	/*
+	 * When this bit is '1', the VNIC is the default VNIC for
+	 * the function.
+	 */
+	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT \
+		UINT32_C(0x1)
+	/*
+	 * When this bit is '1', the VNIC is configured to
+	 * strip VLAN in the RX path.
+	 * If set to '0', then VLAN stripping is disabled on
+	 * this VNIC.
+	 */
+	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE \
+		UINT32_C(0x2)
+	/*
+	 * When this bit is '1', the VNIC is configured to
+	 * buffer receive packets in the hardware until the host
+	 * posts new receive buffers.
+	 * If set to '0', then bd_stall is disabled on
+	 * this VNIC.
+	 */
+	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE \
+		UINT32_C(0x4)
+	/*
+	 * When this bit is '1', the VNIC is configured to
+	 * receive both RoCE and non-RoCE traffic.
+	 * If set to '0', then this VNIC is not configured to
+	 * operate in dual VNIC mode.
+	 */
+	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE \
+		UINT32_C(0x8)
+	/*
+	 * When this flag is set to '1', the VNIC is configured to
+	 * receive only RoCE traffic.
+	 * When this flag is set to '0', the VNIC is not configured
+	 * to receive only RoCE traffic.
+	 * If roce_dual_vnic_mode flag and this flag both are set
+	 * to '1', then it is an invalid configuration of the
+	 * VNIC. The HWRM should not allow that type of
+	 * mis-configuration by HWRM clients.
+	 */
+	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE \
+		UINT32_C(0x10)
+	/*
+	 * When a VNIC uses one destination ring group for certain
+	 * application (e.g. Receive Flow Steering) where
+	 * exact match is used to direct packets to a VNIC with one
+	 * destination ring group only, there is no need to configure
+	 * RSS indirection table for that VNIC as only one destination
+	 * ring group is used.
+	 *
+	 * When this bit is set to '1', then the VNIC is enabled in a
+	 * mode where RSS is enabled in the VNIC using a RSS context
+	 * for computing RSS hash but the RSS indirection table is
+	 * not configured.
+	 */
+	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE \
+		UINT32_C(0x20)
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * When this bit is '1', the VNIC is configured to
+	 * receive both RoCE and non-RoCE traffic, but forward only
+	 * RoCE traffic further. Also RoCE traffic can be mirrored to
+	 * L2 driver.
 	 */
-	uint64_t	resp_addr;
-	/* This value is an opaque id into CFA data structures. */
-	uint64_t	ntuple_filter_id;
-} __attribute__((packed));
-
-/* hwrm_cfa_ntuple_filter_free_output (size:128b/16B) */
-struct hwrm_cfa_ntuple_filter_free_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
+	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
+		UINT32_C(0x40)
+	uint8_t	unused_1[7];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -22174,13 +15781,13 @@ struct hwrm_cfa_ntuple_filter_free_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/******************************
- * hwrm_cfa_ntuple_filter_cfg *
- ******************************/
+/*******************
+ * hwrm_vnic_qcaps *
+ *******************/
 
 
-/* hwrm_cfa_ntuple_filter_cfg_input (size:384b/48B) */
-struct hwrm_cfa_ntuple_filter_cfg_input {
+/* hwrm_vnic_qcaps_input (size:192b/24B) */
+struct hwrm_vnic_qcaps_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -22209,67 +15816,87 @@ struct hwrm_cfa_ntuple_filter_cfg_input {
 	 */
 	uint64_t	resp_addr;
 	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the new_dst_id field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_DST_ID \
+	uint8_t	unused_0[4];
+} __attribute__((packed));
+
+/* hwrm_vnic_qcaps_output (size:192b/24B) */
+struct hwrm_vnic_qcaps_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	/* The maximum receive unit that is settable on a vnic. */
+	uint16_t	mru;
+	uint8_t	unused_0[2];
+	uint32_t	flags;
+	/* Unused. */
+	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_UNUSED \
 		UINT32_C(0x1)
 	/*
-	 * This bit must be '1' for the new_mirror_vnic_id field to be
-	 * configured.
+	 * When this bit is '1', the capability of stripping VLAN in
+	 * the RX path is supported on VNIC(s).
+	 * If set to '0', then VLAN stripping capability is
+	 * not supported on VNIC(s).
 	 */
-	#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
+	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_VLAN_STRIP_CAP \
 		UINT32_C(0x2)
 	/*
-	 * This bit must be '1' for the new_meter_instance_id field to be
-	 * configured.
+	 * When this bit is '1', the capability to buffer receive
+	 * packets in the hardware until the host posts new receive buffers
+	 * is supported on VNIC(s).
+	 * If set to '0', then bd_stall capability is not supported
+	 * on VNIC(s).
 	 */
-	#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \
+	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_BD_STALL_CAP \
 		UINT32_C(0x4)
-	uint8_t	unused_0[4];
-	/* This value is an opaque id into CFA data structures. */
-	uint64_t	ntuple_filter_id;
 	/*
-	 * If set, this value shall represent the new
-	 * Logical VNIC ID of the destination VNIC for the RX
-	 * path and new network port id of the destination port for
-	 * the TX path.
+	 * When this bit is '1', the capability to
+	 * receive both RoCE and non-RoCE traffic on VNIC(s) is
+	 * supported.
+	 * If set to '0', then the capability to receive
+	 * both RoCE and non-RoCE traffic on VNIC(s) is
+	 * not supported.
 	 */
-	uint32_t	new_dst_id;
+	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_DUAL_VNIC_CAP \
+		UINT32_C(0x8)
 	/*
-	 * New Logical VNIC ID of the VNIC where traffic is
-	 * mirrored.
+	 * When this bit is set to '1', the capability to configure
+	 * a VNIC to receive only RoCE traffic is supported.
+	 * When this flag is set to '0', the VNIC capability to
+	 * configure to receive only RoCE traffic is not supported.
 	 */
-	uint32_t	new_mirror_vnic_id;
+	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_ONLY_VNIC_CAP \
+		UINT32_C(0x10)
 	/*
-	 * New meter to attach to the flow. Specifying the
-	 * invalid instance ID is used to remove any existing
-	 * meter from the flow.
+	 * When this bit is set to '1', then the capability to enable
+	 * a VNIC in a mode where RSS context without configuring
+	 * RSS indirection table is supported (for RSS hash computation).
+	 * When this bit is set to '0', then a VNIC can not be configured
+	 * with a mode to enable RSS context without configuring RSS
+	 * indirection table.
 	 */
-	uint16_t	new_meter_instance_id;
+	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_RSS_DFLT_CR_CAP \
+		UINT32_C(0x20)
 	/*
-	 * A value of 0xfff is considered invalid and implies the
-	 * instance is not configured.
+	 * When this bit is '1', the capability to
+	 * mirror the the RoCE traffic is supported.
+	 * If set to '0', then the capability to mirror the
+	 * RoCE traffic is not supported.
 	 */
-	#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \
-		UINT32_C(0xffff)
-	#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_LAST \
-		HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID
-	uint8_t	unused_1[6];
-} __attribute__((packed));
-
-/* hwrm_cfa_ntuple_filter_cfg_output (size:128b/16B) */
-struct hwrm_cfa_ntuple_filter_cfg_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
+	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_CAP \
+		UINT32_C(0x40)
+	/*
+	 * When this bit is '1', the outermost RSS hashing capability
+	 * is supported. If set to '0', then the outermost RSS hashing
+	 * capability is not supported.
+	 */
+	#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_OUTERMOST_RSS_CAP \
+		UINT32_C(0x80)
+	uint8_t	unused_1[7];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -22280,13 +15907,13 @@ struct hwrm_cfa_ntuple_filter_cfg_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/**************************
- * hwrm_cfa_em_flow_alloc *
- **************************/
+/*********************
+ * hwrm_vnic_tpa_cfg *
+ *********************/
 
 
-/* hwrm_cfa_em_flow_alloc_input (size:896b/112B) */
-struct hwrm_cfa_em_flow_alloc_input {
+/* hwrm_vnic_tpa_cfg_input (size:320b/40B) */
+struct hwrm_vnic_tpa_cfg_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -22316,305 +15943,293 @@ struct hwrm_cfa_em_flow_alloc_input {
 	uint64_t	resp_addr;
 	uint32_t	flags;
 	/*
-	 * Enumeration denoting the RX, TX type of the resource.
-	 * This enumeration is used for resources that are similar for both
-	 * TX and RX paths of the chip.
-	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH         UINT32_C(0x1)
-	/* tx path */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_TX        UINT32_C(0x0)
-	/* rx path */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX        UINT32_C(0x1)
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_LAST \
-		HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX
-	/*
-	 * Setting of this flag indicates enabling of a byte counter for a given
-	 * flow.
-	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_BYTE_CTR     UINT32_C(0x2)
-	/*
-	 * Setting of this flag indicates enabling of a packet counter for a given
-	 * flow.
-	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PKT_CTR      UINT32_C(0x4)
-	/* Setting of this flag indicates de-capsulation action for the given flow. */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DECAP        UINT32_C(0x8)
-	/* Setting of this flag indicates encapsulation action for the given flow. */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_ENCAP        UINT32_C(0x10)
-	/*
-	 * Setting of this flag indicates drop action. If this flag is not set,
-	 * then it should be considered accept action.
-	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DROP         UINT32_C(0x20)
-	/*
-	 * Setting of this flag indicates that a meter is expected to be attached
-	 * to this flow. This hint can be used when choosing the action record
-	 * format required for the flow.
-	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_METER        UINT32_C(0x40)
-	uint32_t	enables;
-	/*
-	 * This bit must be '1' for the l2_filter_id field to be
-	 * configured.
+	 * When this bit is '1', the VNIC shall be configured to
+	 * perform transparent packet aggregation (TPA) of
+	 * non-tunneled TCP packets.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
+	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA \
 		UINT32_C(0x1)
 	/*
-	 * This bit must be '1' for the tunnel_type field to be
-	 * configured.
+	 * When this bit is '1', the VNIC shall be configured to
+	 * perform transparent packet aggregation (TPA) of
+	 * tunneled TCP packets.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA \
 		UINT32_C(0x2)
 	/*
-	 * This bit must be '1' for the tunnel_id field to be
-	 * configured.
+	 * When this bit is '1', the VNIC shall be configured to
+	 * perform transparent packet aggregation (TPA) according
+	 * to Windows Receive Segment Coalescing (RSC) rules.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_ID \
+	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE \
 		UINT32_C(0x4)
 	/*
-	 * This bit must be '1' for the src_macaddr field to be
-	 * configured.
+	 * When this bit is '1', the VNIC shall be configured to
+	 * perform transparent packet aggregation (TPA) according
+	 * to Linux Generic Receive Offload (GRO) rules.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_MACADDR \
+	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO \
 		UINT32_C(0x8)
 	/*
-	 * This bit must be '1' for the dst_macaddr field to be
-	 * configured.
+	 * When this bit is '1', the VNIC shall be configured to
+	 * perform transparent packet aggregation (TPA) for TCP
+	 * packets with IP ECN set to non-zero.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_MACADDR \
+	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN \
 		UINT32_C(0x10)
 	/*
-	 * This bit must be '1' for the ovlan_vid field to be
-	 * configured.
+	 * When this bit is '1', the VNIC shall be configured to
+	 * perform transparent packet aggregation (TPA) for
+	 * GRE tunneled TCP packets only if all packets have the
+	 * same GRE sequence.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_OVLAN_VID \
+	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \
 		UINT32_C(0x20)
 	/*
-	 * This bit must be '1' for the ivlan_vid field to be
-	 * configured.
+	 * When this bit is '1' and the GRO mode is enabled,
+	 * the VNIC shall be configured to
+	 * perform transparent packet aggregation (TPA) for
+	 * TCP/IPv4 packets with consecutively increasing IPIDs.
+	 * In other words, the last packet that is being
+	 * aggregated to an already existing aggregation context
+	 * shall have IPID 1 more than the IPID of the last packet
+	 * that was aggregated in that aggregation context.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IVLAN_VID \
+	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK \
 		UINT32_C(0x40)
 	/*
-	 * This bit must be '1' for the ethertype field to be
-	 * configured.
+	 * When this bit is '1' and the GRO mode is enabled,
+	 * the VNIC shall be configured to
+	 * perform transparent packet aggregation (TPA) for
+	 * TCP packets with the same TTL (IPv4) or Hop limit (IPv6)
+	 * value.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ETHERTYPE \
+	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK \
 		UINT32_C(0x80)
+	uint32_t	enables;
 	/*
-	 * This bit must be '1' for the src_ipaddr field to be
+	 * This bit must be '1' for the max_agg_segs field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_IPADDR \
-		UINT32_C(0x100)
+	#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS      UINT32_C(0x1)
 	/*
-	 * This bit must be '1' for the dst_ipaddr field to be
+	 * This bit must be '1' for the max_aggs field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_IPADDR \
-		UINT32_C(0x200)
+	#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS          UINT32_C(0x2)
 	/*
-	 * This bit must be '1' for the ipaddr_type field to be
+	 * This bit must be '1' for the max_agg_timer field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
-		UINT32_C(0x400)
+	#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER     UINT32_C(0x4)
 	/*
-	 * This bit must be '1' for the ip_protocol field to be
+	 * This bit must be '1' for the min_agg_len field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
-		UINT32_C(0x800)
+	#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN       UINT32_C(0x8)
+	/* Logical vnic ID */
+	uint16_t	vnic_id;
 	/*
-	 * This bit must be '1' for the src_port field to be
-	 * configured.
+	 * This is the maximum number of TCP segments that can
+	 * be aggregated (unit is Log2). Max value is 31.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_PORT \
-		UINT32_C(0x1000)
+	uint16_t	max_agg_segs;
+	/* 1 segment */
+	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1   UINT32_C(0x0)
+	/* 2 segments */
+	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2   UINT32_C(0x1)
+	/* 4 segments */
+	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4   UINT32_C(0x2)
+	/* 8 segments */
+	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8   UINT32_C(0x3)
+	/* Any segment size larger than this is not valid */
+	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f)
+	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_LAST \
+		HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX
 	/*
-	 * This bit must be '1' for the dst_port field to be
-	 * configured.
+	 * This is the maximum number of aggregations this VNIC is
+	 * allowed (unit is Log2). Max value is 7
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_PORT \
-		UINT32_C(0x2000)
+	uint16_t	max_aggs;
+	/* 1 aggregation */
+	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1   UINT32_C(0x0)
+	/* 2 aggregations */
+	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2   UINT32_C(0x1)
+	/* 4 aggregations */
+	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4   UINT32_C(0x2)
+	/* 8 aggregations */
+	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8   UINT32_C(0x3)
+	/* 16 aggregations */
+	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16  UINT32_C(0x4)
+	/* Any aggregation size larger than this is not valid */
+	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7)
+	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_LAST \
+		HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX
+	uint8_t	unused_0[2];
 	/*
-	 * This bit must be '1' for the dst_id field to be
-	 * configured.
+	 * This is the maximum amount of time allowed for
+	 * an aggregation context to complete after it was initiated.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_ID \
-		UINT32_C(0x4000)
+	uint32_t	max_agg_timer;
 	/*
-	 * This bit must be '1' for the mirror_vnic_id field to be
-	 * configured.
+	 * This is the minimum amount of payload length required to
+	 * start an aggregation context.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
-		UINT32_C(0x8000)
+	uint32_t	min_agg_len;
+} __attribute__((packed));
+
+/* hwrm_vnic_tpa_cfg_output (size:128b/16B) */
+struct hwrm_vnic_tpa_cfg_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	uint8_t	unused_0[7];
 	/*
-	 * This bit must be '1' for the encap_record_id field to be
-	 * configured.
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ENCAP_RECORD_ID \
-		UINT32_C(0x10000)
+	uint8_t	valid;
+} __attribute__((packed));
+
+/*********************
+ * hwrm_vnic_rss_cfg *
+ *********************/
+
+
+/* hwrm_vnic_rss_cfg_input (size:384b/48B) */
+struct hwrm_vnic_rss_cfg_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
 	/*
-	 * This bit must be '1' for the meter_instance_id field to be
-	 * configured.
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_METER_INSTANCE_ID \
-		UINT32_C(0x20000)
+	uint16_t	cmpl_ring;
 	/*
-	 * This value identifies a set of CFA data structures used for an L2
-	 * context.
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	uint64_t	l2_filter_id;
-	/* Tunnel Type. */
-	uint8_t	tunnel_type;
-	/* Non-tunnel */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
-		UINT32_C(0x0)
-	/* Virtual eXtensible Local Area Network (VXLAN) */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
-		UINT32_C(0x1)
-	/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
-		UINT32_C(0x2)
-	/* Generic Routing Encapsulation (GRE) inside Ethernet payload */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
-		UINT32_C(0x3)
-	/* IP in IP */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
-		UINT32_C(0x4)
-	/* Generic Network Virtualization Encapsulation (Geneve) */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
-		UINT32_C(0x5)
-	/* Multi-Protocol Lable Switching (MPLS) */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
-		UINT32_C(0x6)
-	/* Stateless Transport Tunnel (STT) */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT \
-		UINT32_C(0x7)
-	/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
-		UINT32_C(0x8)
-	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
-		UINT32_C(0x9)
-	/* Any tunneled traffic */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
-		UINT32_C(0xff)
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_LAST \
-		HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
-	uint8_t	unused_0[3];
+	uint16_t	seq_id;
 	/*
-	 * Tunnel identifier.
-	 * Virtual Network Identifier (VNI). Only valid with
-	 * tunnel_types VXLAN, NVGRE, and Geneve.
-	 * Only lower 24-bits of VNI field are used
-	 * in setting up the filter.
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
 	 */
-	uint32_t	tunnel_id;
+	uint16_t	target_id;
 	/*
-	 * This value indicates the source MAC address in
-	 * the Ethernet header.
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	uint8_t	src_macaddr[6];
-	/* The meter instance to attach to the flow. */
-	uint16_t	meter_instance_id;
+	uint64_t	resp_addr;
+	uint32_t	hash_type;
 	/*
-	 * A value of 0xfff is considered invalid and implies the
-	 * instance is not configured.
+	 * When this bit is '1', the RSS hash shall be computed
+	 * over source and destination IPv4 addresses of IPv4
+	 * packets.
 	 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID \
-		UINT32_C(0xffff)
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_LAST \
-		HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID
+	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4         UINT32_C(0x1)
 	/*
-	 * This value indicates the destination MAC address in
-	 * the Ethernet header.
+	 * When this bit is '1', the RSS hash shall be computed
+	 * over source/destination IPv4 addresses and
+	 * source/destination ports of TCP/IPv4 packets.
 	 */
-	uint8_t	dst_macaddr[6];
+	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4     UINT32_C(0x2)
 	/*
-	 * This value indicates the VLAN ID of the outer VLAN tag
-	 * in the Ethernet header.
+	 * When this bit is '1', the RSS hash shall be computed
+	 * over source/destination IPv4 addresses and
+	 * source/destination ports of UDP/IPv4 packets.
 	 */
-	uint16_t	ovlan_vid;
+	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4     UINT32_C(0x4)
 	/*
-	 * This value indicates the VLAN ID of the inner VLAN tag
-	 * in the Ethernet header.
+	 * When this bit is '1', the RSS hash shall be computed
+	 * over source and destination IPv4 addresses of IPv6
+	 * packets.
 	 */
-	uint16_t	ivlan_vid;
-	/* This value indicates the ethertype in the Ethernet header. */
-	uint16_t	ethertype;
+	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6         UINT32_C(0x8)
 	/*
-	 * This value indicates the type of IP address.
-	 * 4 - IPv4
-	 * 6 - IPv6
-	 * All others are invalid.
+	 * When this bit is '1', the RSS hash shall be computed
+	 * over source/destination IPv6 addresses and
+	 * source/destination ports of TCP/IPv6 packets.
 	 */
-	uint8_t	ip_addr_type;
-	/* invalid */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN UINT32_C(0x0)
-	/* IPv4 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV4    UINT32_C(0x4)
-	/* IPv6 */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6    UINT32_C(0x6)
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
-		HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
+	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6     UINT32_C(0x10)
 	/*
-	 * The value of protocol filed in IP header.
-	 * Applies to UDP and TCP traffic.
-	 * 6 - TCP
-	 * 17 - UDP
+	 * When this bit is '1', the RSS hash shall be computed
+	 * over source/destination IPv6 addresses and
+	 * source/destination ports of UDP/IPv6 packets.
 	 */
-	uint8_t	ip_protocol;
-	/* invalid */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN UINT32_C(0x0)
-	/* TCP */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_TCP     UINT32_C(0x6)
-	/* UDP */
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP     UINT32_C(0x11)
-	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_LAST \
-		HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP
-	uint8_t	unused_1[2];
+	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6     UINT32_C(0x20)
+	/* VNIC ID of VNIC associated with RSS table being configured. */
+	uint16_t	vnic_id;
 	/*
-	 * The value of source IP address to be used in filtering.
-	 * For IPv4, first four bytes represent the IP address.
+	 * Specifies which VNIC ring table pair to configure.
+	 * Valid values range from 0 to 7.
 	 */
-	uint32_t	src_ipaddr[4];
+	uint8_t	ring_table_pair_index;
+	/* Flags to specify different RSS hash modes. */
+	uint8_t	hash_mode_flags;
 	/*
-	 * big_endian = True
-	 *     The value of destination IP address to be used in filtering.
-	 *     For IPv4, first four bytes represent the IP address.
+	 * When this bit is '1', it indicates using current RSS
+	 * hash mode setting configured in the device.
 	 */
-	uint32_t	dst_ipaddr[4];
+	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_DEFAULT \
+		UINT32_C(0x1)
 	/*
-	 * The value of source port to be used in filtering.
-	 * Applies to UDP and TCP traffic.
+	 * When this bit is '1', it indicates requesting support of
+	 * RSS hashing over innermost 4 tuples {l3.src, l3.dest,
+	 * l4.src, l4.dest} for tunnel packets. For none-tunnel
+	 * packets, the RSS hash is computed over the normal
+	 * src/dest l3 and src/dest l4 headers.
 	 */
-	uint16_t	src_port;
+	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_4 \
+		UINT32_C(0x2)
 	/*
-	 * The value of destination port to be used in filtering.
-	 * Applies to UDP and TCP traffic.
+	 * When this bit is '1', it indicates requesting support of
+	 * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for
+	 * tunnel packets. For none-tunnel packets, the RSS hash is
+	 * computed over the normal src/dest l3 headers.
 	 */
-	uint16_t	dst_port;
+	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_2 \
+		UINT32_C(0x4)
 	/*
-	 * If set, this value shall represent the
-	 * Logical VNIC ID of the destination VNIC for the RX
-	 * path and network port id of the destination port for
-	 * the TX path.
+	 * When this bit is '1', it indicates requesting support of
+	 * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest,
+	 * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel
+	 * packets, the RSS hash is computed over the normal
+	 * src/dest l3 and src/dest l4 headers.
 	 */
-	uint16_t	dst_id;
+	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_4 \
+		UINT32_C(0x8)
 	/*
-	 * Logical VNIC ID of the VNIC where traffic is
-	 * mirrored.
+	 * When this bit is '1', it indicates requesting support of
+	 * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for
+	 * tunnel packets. For none-tunnel packets, the RSS hash is
+	 * computed over the normal src/dest l3 headers.
 	 */
-	uint16_t	mirror_vnic_id;
-	/* Logical ID of the encapsulation record. */
-	uint32_t	encap_record_id;
-	uint8_t	unused_2[4];
+	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_2 \
+		UINT32_C(0x10)
+	/* This is the address for rss ring group table */
+	uint64_t	ring_grp_tbl_addr;
+	/* This is the address for rss hash key table */
+	uint64_t	hash_key_tbl_addr;
+	/* Index to the rss indirection table. */
+	uint16_t	rss_ctx_idx;
+	uint8_t	unused_1[6];
 } __attribute__((packed));
 
-/* hwrm_cfa_em_flow_alloc_output (size:192b/24B) */
-struct hwrm_cfa_em_flow_alloc_output {
+/* hwrm_vnic_rss_cfg_output (size:128b/16B) */
+struct hwrm_vnic_rss_cfg_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -22623,17 +16238,7 @@ struct hwrm_cfa_em_flow_alloc_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* This value is an opaque id into CFA data structures. */
-	uint64_t	em_filter_id;
-	/*
-	 * This is the ID of the flow associated with this
-	 * filter.
-	 * This value shall be used to match and associate the
-	 * flow identifier returned in completion records.
-	 * A value of 0xFFFFFFFF shall indicate no flow id.
-	 */
-	uint32_t	flow_id;
-	uint8_t	unused_0[3];
+	uint8_t	unused_0[7];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -22644,13 +16249,13 @@ struct hwrm_cfa_em_flow_alloc_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/*************************
- * hwrm_cfa_em_flow_free *
- *************************/
+/**********************
+ * hwrm_vnic_rss_qcfg *
+ **********************/
 
 
-/* hwrm_cfa_em_flow_free_input (size:192b/24B) */
-struct hwrm_cfa_em_flow_free_input {
+/* hwrm_vnic_rss_qcfg_input (size:192b/24B) */
+struct hwrm_vnic_rss_qcfg_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -22678,12 +16283,13 @@ struct hwrm_cfa_em_flow_free_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	/* This value is an opaque id into CFA data structures. */
-	uint64_t	em_filter_id;
+	/* Index to the rss indirection table. */
+	uint16_t	rss_ctx_idx;
+	uint8_t	unused_0[6];
 } __attribute__((packed));
 
-/* hwrm_cfa_em_flow_free_output (size:128b/16B) */
-struct hwrm_cfa_em_flow_free_output {
+/* hwrm_vnic_rss_qcfg_output (size:512b/64B) */
+struct hwrm_vnic_rss_qcfg_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -22692,7 +16298,89 @@ struct hwrm_cfa_em_flow_free_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	uint8_t	unused_0[7];
+	uint32_t	hash_type;
+	/*
+	 * When this bit is '1', the RSS hash shall be computed
+	 * over source and destination IPv4 addresses of IPv4
+	 * packets.
+	 */
+	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV4         UINT32_C(0x1)
+	/*
+	 * When this bit is '1', the RSS hash shall be computed
+	 * over source/destination IPv4 addresses and
+	 * source/destination ports of TCP/IPv4 packets.
+	 */
+	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV4     UINT32_C(0x2)
+	/*
+	 * When this bit is '1', the RSS hash shall be computed
+	 * over source/destination IPv4 addresses and
+	 * source/destination ports of UDP/IPv4 packets.
+	 */
+	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV4     UINT32_C(0x4)
+	/*
+	 * When this bit is '1', the RSS hash shall be computed
+	 * over source and destination IPv4 addresses of IPv6
+	 * packets.
+	 */
+	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV6         UINT32_C(0x8)
+	/*
+	 * When this bit is '1', the RSS hash shall be computed
+	 * over source/destination IPv6 addresses and
+	 * source/destination ports of TCP/IPv6 packets.
+	 */
+	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV6     UINT32_C(0x10)
+	/*
+	 * When this bit is '1', the RSS hash shall be computed
+	 * over source/destination IPv6 addresses and
+	 * source/destination ports of UDP/IPv6 packets.
+	 */
+	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV6     UINT32_C(0x20)
+	uint8_t	unused_0[4];
+	/* This is the value of rss hash key */
+	uint32_t	hash_key[10];
+	/* Flags to specify different RSS hash modes. */
+	uint8_t	hash_mode_flags;
+	/*
+	 * When this bit is '1', it indicates using current RSS
+	 * hash mode setting configured in the device.
+	 */
+	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_DEFAULT \
+		UINT32_C(0x1)
+	/*
+	 * When this bit is '1', it indicates requesting support of
+	 * RSS hashing over innermost 4 tuples {l3.src, l3.dest,
+	 * l4.src, l4.dest} for tunnel packets. For none-tunnel
+	 * packets, the RSS hash is computed over the normal
+	 * src/dest l3 and src/dest l4 headers.
+	 */
+	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_4 \
+		UINT32_C(0x2)
+	/*
+	 * When this bit is '1', it indicates requesting support of
+	 * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for
+	 * tunnel packets. For none-tunnel packets, the RSS hash is
+	 * computed over the normal src/dest l3 headers.
+	 */
+	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_2 \
+		UINT32_C(0x4)
+	/*
+	 * When this bit is '1', it indicates requesting support of
+	 * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest,
+	 * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel
+	 * packets, the RSS hash is computed over the normal
+	 * src/dest l3 and src/dest l4 headers.
+	 */
+	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_4 \
+		UINT32_C(0x8)
+	/*
+	 * When this bit is '1', it indicates requesting support of
+	 * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for
+	 * tunnel packets. For none-tunnel packets, the RSS hash is
+	 * computed over the normal src/dest l3 headers.
+	 */
+	#define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_2 \
+		UINT32_C(0x10)
+	uint8_t	unused_1[6];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -22703,13 +16391,13 @@ struct hwrm_cfa_em_flow_free_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/************************
- * hwrm_cfa_em_flow_cfg *
- ************************/
+/**************************
+ * hwrm_vnic_plcmodes_cfg *
+ **************************/
 
 
-/* hwrm_cfa_em_flow_cfg_input (size:384b/48B) */
-struct hwrm_cfa_em_flow_cfg_input {
+/* hwrm_vnic_plcmodes_cfg_input (size:320b/40B) */
+struct hwrm_vnic_plcmodes_cfg_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -22722,74 +16410,131 @@ struct hwrm_cfa_em_flow_cfg_input {
 	 * commands. This ID is treated as opaque data by the firmware and
 	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	uint16_t	seq_id;
+	uint16_t	seq_id;
+	/*
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
+	 */
+	uint16_t	target_id;
+	/*
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
+	 */
+	uint64_t	resp_addr;
+	uint32_t	flags;
+	/*
+	 * When this bit is '1', the VNIC shall be configured to
+	 * use regular placement algorithm.
+	 * By default, the regular placement algorithm shall be
+	 * enabled on the VNIC.
+	 */
+	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_REGULAR_PLACEMENT \
+		UINT32_C(0x1)
+	/*
+	 * When this bit is '1', the VNIC shall be configured
+	 * use the jumbo placement algorithm.
+	 */
+	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_JUMBO_PLACEMENT \
+		UINT32_C(0x2)
+	/*
+	 * When this bit is '1', the VNIC shall be configured
+	 * to enable Header-Data split for IPv4 packets according
+	 * to the following rules:
+	 * # If the packet is identified as TCP/IPv4, then the
+	 * packet is split at the beginning of the TCP payload.
+	 * # If the packet is identified as UDP/IPv4, then the
+	 * packet is split at the beginning of UDP payload.
+	 * # If the packet is identified as non-TCP and non-UDP
+	 * IPv4 packet, then the packet is split at the beginning
+	 * of the upper layer protocol header carried in the IPv4
+	 * packet.
+	 */
+	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV4 \
+		UINT32_C(0x4)
+	/*
+	 * When this bit is '1', the VNIC shall be configured
+	 * to enable Header-Data split for IPv6 packets according
+	 * to the following rules:
+	 * # If the packet is identified as TCP/IPv6, then the
+	 * packet is split at the beginning of the TCP payload.
+	 * # If the packet is identified as UDP/IPv6, then the
+	 * packet is split at the beginning of UDP payload.
+	 * # If the packet is identified as non-TCP and non-UDP
+	 * IPv6 packet, then the packet is split at the beginning
+	 * of the upper layer protocol header carried in the IPv6
+	 * packet.
+	 */
+	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV6 \
+		UINT32_C(0x8)
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * When this bit is '1', the VNIC shall be configured
+	 * to enable Header-Data split for FCoE packets at the
+	 * beginning of FC payload.
 	 */
-	uint16_t	target_id;
+	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_FCOE \
+		UINT32_C(0x10)
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * When this bit is '1', the VNIC shall be configured
+	 * to enable Header-Data split for RoCE packets at the
+	 * beginning of RoCE payload (after BTH/GRH headers).
 	 */
-	uint64_t	resp_addr;
+	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_ROCE \
+		UINT32_C(0x20)
 	uint32_t	enables;
 	/*
-	 * This bit must be '1' for the new_dst_id field to be
+	 * This bit must be '1' for the jumbo_thresh_valid field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_DST_ID \
+	#define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_JUMBO_THRESH_VALID \
 		UINT32_C(0x1)
 	/*
-	 * This bit must be '1' for the new_mirror_vnic_id field to be
+	 * This bit must be '1' for the hds_offset_valid field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
+	#define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_OFFSET_VALID \
 		UINT32_C(0x2)
 	/*
-	 * This bit must be '1' for the new_meter_instance_id field to be
+	 * This bit must be '1' for the hds_threshold_valid field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \
+	#define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_THRESHOLD_VALID \
 		UINT32_C(0x4)
-	uint8_t	unused_0[4];
-	/* This value is an opaque id into CFA data structures. */
-	uint64_t	em_filter_id;
-	/*
-	 * If set, this value shall represent the new
-	 * Logical VNIC ID of the destination VNIC for the RX
-	 * path and network port id of the destination port for
-	 * the TX path.
-	 */
-	uint32_t	new_dst_id;
+	/* Logical vnic ID */
+	uint32_t	vnic_id;
 	/*
-	 * New Logical VNIC ID of the VNIC where traffic is
-	 * mirrored.
+	 * When jumbo placement algorithm is enabled, this value
+	 * is used to determine the threshold for jumbo placement.
+	 * Packets with length larger than this value will be
+	 * placed according to the jumbo placement algorithm.
 	 */
-	uint32_t	new_mirror_vnic_id;
+	uint16_t	jumbo_thresh;
 	/*
-	 * New meter to attach to the flow. Specifying the
-	 * invalid instance ID is used to remove any existing
-	 * meter from the flow.
+	 * This value is used to determine the offset into
+	 * packet buffer where the split data (payload) will be
+	 * placed according to one of of HDS placement algorithm.
+	 *
+	 * The lengths of packet buffers provided for split data
+	 * shall be larger than this value.
 	 */
-	uint16_t	new_meter_instance_id;
+	uint16_t	hds_offset;
 	/*
-	 * A value of 0xfff is considered invalid and implies the
-	 * instance is not configured.
+	 * When one of the HDS placement algorithm is enabled, this
+	 * value is used to determine the threshold for HDS
+	 * placement.
+	 * Packets with length larger than this value will be
+	 * placed according to the HDS placement algorithm.
+	 * This value shall be in multiple of 4 bytes.
 	 */
-	#define HWRM_CFA_EM_FLOW_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \
-		UINT32_C(0xffff)
-	#define HWRM_CFA_EM_FLOW_CFG_INPUT_NEW_METER_INSTANCE_ID_LAST \
-		HWRM_CFA_EM_FLOW_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID
-	uint8_t	unused_1[6];
+	uint16_t	hds_threshold;
+	uint8_t	unused_0[6];
 } __attribute__((packed));
 
-/* hwrm_cfa_em_flow_cfg_output (size:128b/16B) */
-struct hwrm_cfa_em_flow_cfg_output {
+/* hwrm_vnic_plcmodes_cfg_output (size:128b/16B) */
+struct hwrm_vnic_plcmodes_cfg_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -22809,13 +16554,13 @@ struct hwrm_cfa_em_flow_cfg_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/********************************
- * hwrm_cfa_meter_profile_alloc *
- ********************************/
+/***************************
+ * hwrm_vnic_plcmodes_qcfg *
+ ***************************/
 
 
-/* hwrm_cfa_meter_profile_alloc_input (size:320b/40B) */
-struct hwrm_cfa_meter_profile_alloc_input {
+/* hwrm_vnic_plcmodes_qcfg_input (size:192b/24B) */
+struct hwrm_vnic_plcmodes_qcfg_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -22843,220 +16588,138 @@ struct hwrm_cfa_meter_profile_alloc_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	uint8_t	flags;
+	/* Logical vnic ID */
+	uint32_t	vnic_id;
+	uint8_t	unused_0[4];
+} __attribute__((packed));
+
+/* hwrm_vnic_plcmodes_qcfg_output (size:192b/24B) */
+struct hwrm_vnic_plcmodes_qcfg_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	uint32_t	flags;
 	/*
-	 * Enumeration denoting the RX, TX type of the resource.
-	 * This enumeration is used for resources that are similar for both
-	 * TX and RX paths of the chip.
+	 * When this bit is '1', the VNIC is configured to
+	 * use regular placement algorithm.
 	 */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH     UINT32_C(0x1)
-	/* tx path */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_TX \
-		UINT32_C(0x0)
-	/* rx path */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_RX \
-		UINT32_C(0x1)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_LAST \
-		HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_RX
-	/* The meter algorithm type. */
-	uint8_t	meter_type;
-	/* RFC 2697 (srTCM) */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC2697 \
-		UINT32_C(0x0)
-	/* RFC 2698 (trTCM) */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC2698 \
+	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_REGULAR_PLACEMENT \
 		UINT32_C(0x1)
-	/* RFC 4115 (trTCM) */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC4115 \
+	/*
+	 * When this bit is '1', the VNIC is configured to
+	 * use the jumbo placement algorithm.
+	 */
+	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_JUMBO_PLACEMENT \
 		UINT32_C(0x2)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_LAST \
-		HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC4115
 	/*
-	 * This field is reserved for the future use.
-	 * It shall be set to 0.
+	 * When this bit is '1', the VNIC is configured
+	 * to enable Header-Data split for IPv4 packets.
 	 */
-	uint16_t	reserved1;
+	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV4 \
+		UINT32_C(0x4)
 	/*
-	 * This field is reserved for the future use.
-	 * It shall be set to 0.
+	 * When this bit is '1', the VNIC is configured
+	 * to enable Header-Data split for IPv6 packets.
 	 */
-	uint32_t	reserved2;
-	/* A meter rate specified in bytes-per-second. */
-	uint32_t	commit_rate;
-	/* The bandwidth value. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_MASK \
-		UINT32_C(0xfffffff)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_SFT \
-		0
-	/* The granularity of the value (bits or bytes). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE \
-		UINT32_C(0x10000000)
-	/* Value is in bits. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BITS \
-		(UINT32_C(0x0) << 28)
-	/* Value is in bytes. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BYTES \
-		(UINT32_C(0x1) << 28)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_LAST \
-		HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BYTES
-	/* bw_value_unit is 3 b */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MASK \
-		UINT32_C(0xe0000000)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_SFT \
-		29
-	/* Value is in Mb or MB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MEGA \
-		(UINT32_C(0x0) << 29)
-	/* Value is in Kb or KB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_KILO \
-		(UINT32_C(0x2) << 29)
-	/* Value is in bits or bytes. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_BASE \
-		(UINT32_C(0x4) << 29)
-	/* Value is in Gb or GB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_GIGA \
-		(UINT32_C(0x6) << 29)
-	/* Value is in 1/100th of a percentage of total bandwidth. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \
-		(UINT32_C(0x1) << 29)
-	/* Invalid unit */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID \
-		(UINT32_C(0x7) << 29)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \
-		HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID
-	/* A meter burst size specified in bytes. */
-	uint32_t	commit_burst;
-	/* The bandwidth value. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_MASK \
-		UINT32_C(0xfffffff)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_SFT \
-		0
-	/* The granularity of the value (bits or bytes). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE \
-		UINT32_C(0x10000000)
-	/* Value is in bits. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BITS \
-		(UINT32_C(0x0) << 28)
-	/* Value is in bytes. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BYTES \
-		(UINT32_C(0x1) << 28)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_LAST \
-		HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BYTES
-	/* bw_value_unit is 3 b */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MASK \
-		UINT32_C(0xe0000000)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_SFT \
-		29
-	/* Value is in Mb or MB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MEGA \
-		(UINT32_C(0x0) << 29)
-	/* Value is in Kb or KB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_KILO \
-		(UINT32_C(0x2) << 29)
-	/* Value is in bits or bytes. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_BASE \
-		(UINT32_C(0x4) << 29)
-	/* Value is in Gb or GB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_GIGA \
-		(UINT32_C(0x6) << 29)
-	/* Value is in 1/100th of a percentage of total bandwidth. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \
-		(UINT32_C(0x1) << 29)
-	/* Invalid unit */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \
-		(UINT32_C(0x7) << 29)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \
-		HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID
-	/* A meter rate specified in bytes-per-second. */
-	uint32_t	excess_peak_rate;
-	/* The bandwidth value. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_MASK \
-		UINT32_C(0xfffffff)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_SFT \
-		0
-	/* The granularity of the value (bits or bytes). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE \
-		UINT32_C(0x10000000)
-	/* Value is in bits. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BITS \
-		(UINT32_C(0x0) << 28)
-	/* Value is in bytes. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES \
-		(UINT32_C(0x1) << 28)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_LAST \
-		HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES
-	/* bw_value_unit is 3 b */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MASK \
-		UINT32_C(0xe0000000)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_SFT \
-		29
-	/* Value is in Mb or MB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MEGA \
-		(UINT32_C(0x0) << 29)
-	/* Value is in Kb or KB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_KILO \
-		(UINT32_C(0x2) << 29)
-	/* Value is in bits or bytes. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_BASE \
-		(UINT32_C(0x4) << 29)
-	/* Value is in Gb or GB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_GIGA \
-		(UINT32_C(0x6) << 29)
-	/* Value is in 1/100th of a percentage of total bandwidth. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \
-		(UINT32_C(0x1) << 29)
-	/* Invalid unit */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID \
-		(UINT32_C(0x7) << 29)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \
-		HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID
-	/* A meter burst size specified in bytes. */
-	uint32_t	excess_peak_burst;
-	/* The bandwidth value. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_MASK \
-		UINT32_C(0xfffffff)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_SFT \
-		0
-	/* The granularity of the value (bits or bytes). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE \
-		UINT32_C(0x10000000)
-	/* Value is in bits. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BITS \
-		(UINT32_C(0x0) << 28)
-	/* Value is in bytes. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES \
-		(UINT32_C(0x1) << 28)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_LAST \
-		HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES
-	/* bw_value_unit is 3 b */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MASK \
-		UINT32_C(0xe0000000)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_SFT \
-		29
-	/* Value is in Mb or MB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MEGA \
-		(UINT32_C(0x0) << 29)
-	/* Value is in Kb or KB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_KILO \
-		(UINT32_C(0x2) << 29)
-	/* Value is in bits or bytes. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_BASE \
-		(UINT32_C(0x4) << 29)
-	/* Value is in Gb or GB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_GIGA \
-		(UINT32_C(0x6) << 29)
-	/* Value is in 1/100th of a percentage of total bandwidth. */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_PERCENT1_100 \
-		(UINT32_C(0x1) << 29)
-	/* Invalid unit */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID \
-		(UINT32_C(0x7) << 29)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_LAST \
-		HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID
+	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV6 \
+		UINT32_C(0x8)
+	/*
+	 * When this bit is '1', the VNIC is configured
+	 * to enable Header-Data split for FCoE packets.
+	 */
+	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_FCOE \
+		UINT32_C(0x10)
+	/*
+	 * When this bit is '1', the VNIC is configured
+	 * to enable Header-Data split for RoCE packets.
+	 */
+	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_ROCE \
+		UINT32_C(0x20)
+	/*
+	 * When this bit is '1', the VNIC is configured
+	 * to be the default VNIC of the requesting function.
+	 */
+	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_DFLT_VNIC \
+		UINT32_C(0x40)
+	/*
+	 * When jumbo placement algorithm is enabled, this value
+	 * is used to determine the threshold for jumbo placement.
+	 * Packets with length larger than this value will be
+	 * placed according to the jumbo placement algorithm.
+	 */
+	uint16_t	jumbo_thresh;
+	/*
+	 * This value is used to determine the offset into
+	 * packet buffer where the split data (payload) will be
+	 * placed according to one of of HDS placement algorithm.
+	 *
+	 * The lengths of packet buffers provided for split data
+	 * shall be larger than this value.
+	 */
+	uint16_t	hds_offset;
+	/*
+	 * When one of the HDS placement algorithm is enabled, this
+	 * value is used to determine the threshold for HDS
+	 * placement.
+	 * Packets with length larger than this value will be
+	 * placed according to the HDS placement algorithm.
+	 * This value shall be in multiple of 4 bytes.
+	 */
+	uint16_t	hds_threshold;
+	uint8_t	unused_0[5];
+	/*
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
+	 */
+	uint8_t	valid;
+} __attribute__((packed));
+
+/**********************************
+ * hwrm_vnic_rss_cos_lb_ctx_alloc *
+ **********************************/
+
+
+/* hwrm_vnic_rss_cos_lb_ctx_alloc_input (size:128b/16B) */
+struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/*
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
+	 */
+	uint16_t	cmpl_ring;
+	/*
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 */
+	uint16_t	seq_id;
+	/*
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
+	 */
+	uint16_t	target_id;
+	/*
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
+	 */
+	uint64_t	resp_addr;
 } __attribute__((packed));
 
-/* hwrm_cfa_meter_profile_alloc_output (size:128b/16B) */
-struct hwrm_cfa_meter_profile_alloc_output {
+/* hwrm_vnic_rss_cos_lb_ctx_alloc_output (size:128b/16B) */
+struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -23065,16 +16728,8 @@ struct hwrm_cfa_meter_profile_alloc_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* This value identifies a meter profile in CFA. */
-	uint16_t	meter_profile_id;
-	/*
-	 * A value of 0xfff is considered invalid and implies the
-	 * profile is not configured.
-	 */
-	#define HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_INVALID \
-		UINT32_C(0xffff)
-	#define HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_LAST \
-		HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_INVALID
+	/* rss_cos_lb_ctx_id is 16 b */
+	uint16_t	rss_cos_lb_ctx_id;
 	uint8_t	unused_0[5];
 	/*
 	 * This field is used in Output records to indicate that the output
@@ -23086,13 +16741,13 @@ struct hwrm_cfa_meter_profile_alloc_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/*******************************
- * hwrm_cfa_meter_profile_free *
- *******************************/
+/*********************************
+ * hwrm_vnic_rss_cos_lb_ctx_free *
+ *********************************/
 
 
-/* hwrm_cfa_meter_profile_free_input (size:192b/24B) */
-struct hwrm_cfa_meter_profile_free_input {
+/* hwrm_vnic_rss_cos_lb_ctx_free_input (size:192b/24B) */
+struct hwrm_vnic_rss_cos_lb_ctx_free_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -23120,37 +16775,13 @@ struct hwrm_cfa_meter_profile_free_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	uint8_t	flags;
-	/*
-	 * Enumeration denoting the RX, TX type of the resource.
-	 * This enumeration is used for resources that are similar for both
-	 * TX and RX paths of the chip.
-	 */
-	#define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH     UINT32_C(0x1)
-	/* tx path */
-	#define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_TX \
-		UINT32_C(0x0)
-	/* rx path */
-	#define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_RX \
-		UINT32_C(0x1)
-	#define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_LAST \
-		HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_RX
-	uint8_t	unused_0;
-	/* This value identifies a meter profile in CFA. */
-	uint16_t	meter_profile_id;
-	/*
-	 * A value of 0xfff is considered invalid and implies the
-	 * profile is not configured.
-	 */
-	#define HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_INVALID \
-		UINT32_C(0xffff)
-	#define HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_LAST \
-		HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_INVALID
-	uint8_t	unused_1[4];
+	/* rss_cos_lb_ctx_id is 16 b */
+	uint16_t	rss_cos_lb_ctx_id;
+	uint8_t	unused_0[6];
 } __attribute__((packed));
 
-/* hwrm_cfa_meter_profile_free_output (size:128b/16B) */
-struct hwrm_cfa_meter_profile_free_output {
+/* hwrm_vnic_rss_cos_lb_ctx_free_output (size:128b/16B) */
+struct hwrm_vnic_rss_cos_lb_ctx_free_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -23167,260 +16798,323 @@ struct hwrm_cfa_meter_profile_free_output {
 	 * When writing a command completion or response to an internal processor,
 	 * the order of writes has to be such that this field is written last.
 	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/******************************
- * hwrm_cfa_meter_profile_cfg *
- ******************************/
-
-
-/* hwrm_cfa_meter_profile_cfg_input (size:320b/40B) */
-struct hwrm_cfa_meter_profile_cfg_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
+	uint8_t	valid;
+} __attribute__((packed));
+
+/*******************
+ * hwrm_ring_alloc *
+ *******************/
+
+
+/* hwrm_ring_alloc_input (size:704b/88B) */
+struct hwrm_ring_alloc_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/*
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
+	 */
+	uint16_t	cmpl_ring;
+	/*
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 */
+	uint16_t	seq_id;
+	/*
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
+	 */
+	uint16_t	target_id;
+	/*
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
+	 */
+	uint64_t	resp_addr;
+	uint32_t	enables;
+	/*
+	 * This bit must be '1' for the ring_arb_cfg field to be
+	 * configured.
+	 */
+	#define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG \
+		UINT32_C(0x2)
+	/*
+	 * This bit must be '1' for the stat_ctx_id_valid field to be
+	 * configured.
+	 */
+	#define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID \
+		UINT32_C(0x8)
+	/*
+	 * This bit must be '1' for the max_bw_valid field to be
+	 * configured.
+	 */
+	#define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID \
+		UINT32_C(0x20)
+	/*
+	 * This bit must be '1' for the rx_ring_id field to be
+	 * configured.
+	 */
+	#define HWRM_RING_ALLOC_INPUT_ENABLES_RX_RING_ID_VALID \
+		UINT32_C(0x40)
+	/*
+	 * This bit must be '1' for the nq_ring_id field to be
+	 * configured.
+	 */
+	#define HWRM_RING_ALLOC_INPUT_ENABLES_NQ_RING_ID_VALID \
+		UINT32_C(0x80)
+	/*
+	 * This bit must be '1' for the rx_buf_size field to be
+	 * configured.
+	 */
+	#define HWRM_RING_ALLOC_INPUT_ENABLES_RX_BUF_SIZE_VALID \
+		UINT32_C(0x100)
+	/* Ring Type. */
+	uint8_t	ring_type;
+	/* L2 Completion Ring (CR) */
+	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL   UINT32_C(0x0)
+	/* TX Ring (TR) */
+	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX        UINT32_C(0x1)
+	/* RX Ring (RR) */
+	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX        UINT32_C(0x2)
+	/* RoCE Notification Completion Ring (ROCE_CR) */
+	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+	/* RX Aggregation Ring */
+	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX_AGG    UINT32_C(0x4)
+	/* Notification Queue */
+	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ        UINT32_C(0x5)
+	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_LAST \
+		HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ
+	uint8_t	unused_0;
+	/* Ring allocation flags. */
+	uint16_t	flags;
+	/*
+	 * For Rx rings, the incoming packet data can be placed at either
+	 * a 0B or 2B offset from the start of the Rx packet buffer. When
+	 * '1', the received packet will be padded with 2B of zeros at the
+	 * front of the packet. Note that this flag is only used for
+	 * Rx rings and is ignored for all other rings included Rx
+	 * Aggregation rings.
+	 */
+	#define HWRM_RING_ALLOC_INPUT_FLAGS_RX_SOP_PAD     UINT32_C(0x1)
+	/*
+	 * This value is a pointer to the page table for the
+	 * Ring.
+	 */
+	uint64_t	page_tbl_addr;
+	/* First Byte Offset of the first entry in the first page. */
+	uint32_t	fbo;
+	/*
+	 * Actual page size in 2^page_size. The supported range is increments
+	 * in powers of 2 from 16 bytes to 1GB.
+	 * - 4 = 16 B
+	 *     Page size is 16 B.
+	 * - 12 = 4 KB
+	 *     Page size is 4 KB.
+	 * - 13 = 8 KB
+	 *     Page size is 8 KB.
+	 * - 16 = 64 KB
+	 *     Page size is 64 KB.
+	 * - 21 = 2 MB
+	 *     Page size is 2 MB.
+	 * - 22 = 4 MB
+	 *     Page size is 4 MB.
+	 * - 30 = 1 GB
+	 *     Page size is 1 GB.
+	 */
+	uint8_t	page_size;
+	/*
+	 * This value indicates the depth of page table.
+	 * For this version of the specification, value other than 0 or
+	 * 1 shall be considered as an invalid value.
+	 * When the page_tbl_depth = 0, then it is treated as a
+	 * special case with the following.
+	 * 1. FBO and page size fields are not valid.
+	 * 2. page_tbl_addr is the physical address of the first
+	 *    element of the ring.
+	 */
+	uint8_t	page_tbl_depth;
+	uint8_t	unused_1[2];
+	/*
+	 * Number of 16B units in the ring.  Minimum size for
+	 * a ring is 16 16B entries.
+	 */
+	uint32_t	length;
+	/*
+	 * Logical ring number for the ring to be allocated.
+	 * This value determines the position in the doorbell
+	 * area where the update to the ring will be made.
+	 *
+	 * For completion rings, this value is also the MSI-X
+	 * vector number for the function the completion ring is
+	 * associated with.
+	 */
+	uint16_t	logical_id;
+	/*
+	 * This field is used only when ring_type is a TX ring.
+	 * This value indicates what completion ring the TX ring
+	 * is associated with.
+	 */
+	uint16_t	cmpl_ring_id;
+	/*
+	 * This field is used only when ring_type is a TX ring.
+	 * This value indicates what CoS queue the TX ring
+	 * is associated with.
+	 */
+	uint16_t	queue_id;
 	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
+	 * When allocating a Rx ring or Rx aggregation ring, this field
+	 * specifies the size of the buffer descriptors posted to the ring.
 	 */
-	uint16_t	cmpl_ring;
+	uint16_t	rx_buf_size;
 	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 * When allocating an Rx aggregation ring, this field
+	 * specifies the associated Rx ring ID.
 	 */
-	uint16_t	seq_id;
+	uint16_t	rx_ring_id;
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * When allocating a completion ring, this field
+	 * specifies the associated NQ ring ID.
 	 */
-	uint16_t	target_id;
+	uint16_t	nq_ring_id;
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * This field is used only when ring_type is a TX ring.
+	 * This field is used to configure arbitration related
+	 * parameters for a TX ring.
 	 */
-	uint64_t	resp_addr;
-	uint8_t	flags;
+	uint16_t	ring_arb_cfg;
+	/* Arbitration policy used for the ring. */
+	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK \
+		UINT32_C(0xf)
+	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT       0
 	/*
-	 * Enumeration denoting the RX, TX type of the resource.
-	 * This enumeration is used for resources that are similar for both
-	 * TX and RX paths of the chip.
+	 * Use strict priority for the TX ring.
+	 * Priority value is specified in arb_policy_param
 	 */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH     UINT32_C(0x1)
-	/* tx path */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_TX    UINT32_C(0x0)
-	/* rx path */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_RX    UINT32_C(0x1)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_LAST \
-		HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_RX
-	/* The meter algorithm type. */
-	uint8_t	meter_type;
-	/* RFC 2697 (srTCM) */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC2697 \
-		UINT32_C(0x0)
-	/* RFC 2698 (trTCM) */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC2698 \
+	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \
 		UINT32_C(0x1)
-	/* RFC 4115 (trTCM) */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC4115 \
+	/*
+	 * Use weighted fair queue arbitration for the TX ring.
+	 * Weight is specified in arb_policy_param
+	 */
+	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \
 		UINT32_C(0x2)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_LAST \
-		HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC4115
-	/* This value identifies a meter profile in CFA. */
-	uint16_t	meter_profile_id;
+	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \
+		HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ
+	/* Reserved field. */
+	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK \
+		UINT32_C(0xf0)
+	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_SFT             4
 	/*
-	 * A value of 0xfff is considered invalid and implies the
-	 * profile is not configured.
+	 * Arbitration policy specific parameter.
+	 * # For strict priority arbitration policy, this field
+	 * represents a priority value. If set to 0, then the priority
+	 * is not specified and the HWRM is allowed to select
+	 * any priority for this TX ring.
+	 * # For weighted fair queue arbitration policy, this field
+	 * represents a weight value. If set to 0, then the weight
+	 * is not specified and the HWRM is allowed to select
+	 * any weight for this TX ring.
 	 */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_INVALID \
-		UINT32_C(0xffff)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_LAST \
-		HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_INVALID
+	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK \
+		UINT32_C(0xff00)
+	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8
+	uint16_t	unused_3;
 	/*
 	 * This field is reserved for the future use.
 	 * It shall be set to 0.
 	 */
-	uint32_t	reserved;
-	/* A meter rate specified in bytes-per-second. */
-	uint32_t	commit_rate;
-	/* The bandwidth value. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_MASK \
-		UINT32_C(0xfffffff)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_SFT \
-		0
-	/* The granularity of the value (bits or bytes). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE \
-		UINT32_C(0x10000000)
-	/* Value is in bits. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BITS \
-		(UINT32_C(0x0) << 28)
-	/* Value is in bytes. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BYTES \
-		(UINT32_C(0x1) << 28)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_LAST \
-		HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BYTES
-	/* bw_value_unit is 3 b */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MASK \
-		UINT32_C(0xe0000000)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_SFT \
-		29
-	/* Value is in Mb or MB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MEGA \
-		(UINT32_C(0x0) << 29)
-	/* Value is in Kb or KB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_KILO \
-		(UINT32_C(0x2) << 29)
-	/* Value is in bits or bytes. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_BASE \
-		(UINT32_C(0x4) << 29)
-	/* Value is in Gb or GB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_GIGA \
-		(UINT32_C(0x6) << 29)
-	/* Value is in 1/100th of a percentage of total bandwidth. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \
-		(UINT32_C(0x1) << 29)
-	/* Invalid unit */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID \
-		(UINT32_C(0x7) << 29)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \
-		HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID
-	/* A meter burst size specified in bytes. */
-	uint32_t	commit_burst;
-	/* The bandwidth value. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_MASK \
-		UINT32_C(0xfffffff)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_SFT \
-		0
-	/* The granularity of the value (bits or bytes). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE \
-		UINT32_C(0x10000000)
-	/* Value is in bits. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BITS \
-		(UINT32_C(0x0) << 28)
-	/* Value is in bytes. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BYTES \
-		(UINT32_C(0x1) << 28)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_LAST \
-		HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BYTES
-	/* bw_value_unit is 3 b */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MASK \
-		UINT32_C(0xe0000000)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_SFT \
-		29
-	/* Value is in Mb or MB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MEGA \
-		(UINT32_C(0x0) << 29)
-	/* Value is in Kb or KB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_KILO \
-		(UINT32_C(0x2) << 29)
-	/* Value is in bits or bytes. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_BASE \
-		(UINT32_C(0x4) << 29)
-	/* Value is in Gb or GB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_GIGA \
-		(UINT32_C(0x6) << 29)
-	/* Value is in 1/100th of a percentage of total bandwidth. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \
-		(UINT32_C(0x1) << 29)
-	/* Invalid unit */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \
-		(UINT32_C(0x7) << 29)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \
-		HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID
-	/* A meter rate specified in bytes-per-second. */
-	uint32_t	excess_peak_rate;
-	/* The bandwidth value. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_MASK \
-		UINT32_C(0xfffffff)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_SFT \
-		0
-	/* The granularity of the value (bits or bytes). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE \
-		UINT32_C(0x10000000)
-	/* Value is in bits. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BITS \
-		(UINT32_C(0x0) << 28)
-	/* Value is in bytes. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES \
-		(UINT32_C(0x1) << 28)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_LAST \
-		HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES
-	/* bw_value_unit is 3 b */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MASK \
-		UINT32_C(0xe0000000)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_SFT \
-		29
-	/* Value is in Mb or MB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MEGA \
-		(UINT32_C(0x0) << 29)
-	/* Value is in Kb or KB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_KILO \
-		(UINT32_C(0x2) << 29)
-	/* Value is in bits or bytes. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_BASE \
-		(UINT32_C(0x4) << 29)
-	/* Value is in Gb or GB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_GIGA \
-		(UINT32_C(0x6) << 29)
-	/* Value is in 1/100th of a percentage of total bandwidth. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \
-		(UINT32_C(0x1) << 29)
-	/* Invalid unit */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID \
-		(UINT32_C(0x7) << 29)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \
-		HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID
-	/* A meter burst size specified in bytes. */
-	uint32_t	excess_peak_burst;
+	uint32_t	reserved3;
+	/*
+	 * This field is used only when ring_type is a TX ring.
+	 * This input indicates what statistics context this ring
+	 * should be associated with.
+	 */
+	uint32_t	stat_ctx_id;
+	/*
+	 * This field is reserved for the future use.
+	 * It shall be set to 0.
+	 */
+	uint32_t	reserved4;
+	/*
+	 * This field is used only when ring_type is a TX ring
+	 * to specify maximum BW allocated to the TX ring.
+	 * The HWRM will translate this value into byte counter and
+	 * time interval used for this ring inside the device.
+	 */
+	uint32_t	max_bw;
 	/* The bandwidth value. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_MASK \
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK \
 		UINT32_C(0xfffffff)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_SFT \
-		0
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT              0
 	/* The granularity of the value (bits or bytes). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE \
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE \
 		UINT32_C(0x10000000)
 	/* Value is in bits. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BITS \
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BITS \
 		(UINT32_C(0x0) << 28)
 	/* Value is in bytes. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES \
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES \
 		(UINT32_C(0x1) << 28)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_LAST \
-		HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_LAST \
+		HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES
 	/* bw_value_unit is 3 b */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MASK \
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
 		UINT32_C(0xe0000000)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_SFT \
-		29
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT         29
 	/* Value is in Mb or MB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MEGA \
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
 		(UINT32_C(0x0) << 29)
 	/* Value is in Kb or KB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_KILO \
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \
 		(UINT32_C(0x2) << 29)
 	/* Value is in bits or bytes. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_BASE \
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \
 		(UINT32_C(0x4) << 29)
 	/* Value is in Gb or GB (base 10). */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_GIGA \
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
 		(UINT32_C(0x6) << 29)
 	/* Value is in 1/100th of a percentage of total bandwidth. */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_PERCENT1_100 \
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
 		(UINT32_C(0x1) << 29)
 	/* Invalid unit */
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID \
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
 		(UINT32_C(0x7) << 29)
-	#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_LAST \
-		HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID
+	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
+		HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
+	/*
+	 * This field is used only when ring_type is a Completion ring.
+	 * This value indicates what interrupt mode should be used
+	 * on this completion ring.
+	 * Note: In the legacy interrupt mode, no more than 16
+	 * completion rings are allowed.
+	 */
+	uint8_t	int_mode;
+	/* Legacy INTA */
+	#define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY UINT32_C(0x0)
+	/* Reserved */
+	#define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD   UINT32_C(0x1)
+	/* MSI-X */
+	#define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX   UINT32_C(0x2)
+	/* No Interrupt - Polled mode */
+	#define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL   UINT32_C(0x3)
+	#define HWRM_RING_ALLOC_INPUT_INT_MODE_LAST \
+		HWRM_RING_ALLOC_INPUT_INT_MODE_POLL
+	uint8_t	unused_4[3];
+	/*
+	 * The cq_handle is specified when allocating a completion ring. For
+	 * devices that support NQs, this cq_handle will be included in the
+	 * NQE to specify which CQ should be read to retrieve the completion
+	 * record.
+	 */
+	uint64_t	cq_handle;
 } __attribute__((packed));
 
-/* hwrm_cfa_meter_profile_cfg_output (size:128b/16B) */
-struct hwrm_cfa_meter_profile_cfg_output {
+/* hwrm_ring_alloc_output (size:128b/16B) */
+struct hwrm_ring_alloc_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -23429,7 +17123,14 @@ struct hwrm_cfa_meter_profile_cfg_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	uint8_t	unused_0[7];
+	/*
+	 * Physical number of ring allocated.
+	 * This value shall be unique for a ring type.
+	 */
+	uint16_t	ring_id;
+	/* Logical number of ring allocated. */
+	uint16_t	logical_ring_id;
+	uint8_t	unused_0[3];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -23440,13 +17141,13 @@ struct hwrm_cfa_meter_profile_cfg_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/*********************************
- * hwrm_cfa_meter_instance_alloc *
- *********************************/
+/******************
+ * hwrm_ring_free *
+ ******************/
 
 
-/* hwrm_cfa_meter_instance_alloc_input (size:192b/24B) */
-struct hwrm_cfa_meter_instance_alloc_input {
+/* hwrm_ring_free_input (size:192b/24B) */
+struct hwrm_ring_free_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -23464,48 +17165,40 @@ struct hwrm_cfa_meter_instance_alloc_input {
 	 * The target ID of the command:
 	 * * 0x0-0xFFF8 - The function ID
 	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	uint8_t	flags;
-	/*
-	 * Enumeration denoting the RX, TX type of the resource.
-	 * This enumeration is used for resources that are similar for both
-	 * TX and RX paths of the chip.
-	 */
-	#define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH \
-		UINT32_C(0x1)
-	/* tx path */
-	#define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_TX \
-		UINT32_C(0x0)
-	/* rx path */
-	#define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_RX \
-		UINT32_C(0x1)
-	#define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_LAST \
-		HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_RX
-	uint8_t	unused_0;
-	/* This value identifies a meter profile in CFA. */
-	uint16_t	meter_profile_id;
+	 * * 0xFFFF - HWRM
+	 */
+	uint16_t	target_id;
 	/*
-	 * A value of 0xfff is considered invalid and implies the
-	 * profile is not configured.
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	#define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID \
-		UINT32_C(0xffff)
-	#define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_LAST \
-		HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID
+	uint64_t	resp_addr;
+	/* Ring Type. */
+	uint8_t	ring_type;
+	/* L2 Completion Ring (CR) */
+	#define HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL   UINT32_C(0x0)
+	/* TX Ring (TR) */
+	#define HWRM_RING_FREE_INPUT_RING_TYPE_TX        UINT32_C(0x1)
+	/* RX Ring (RR) */
+	#define HWRM_RING_FREE_INPUT_RING_TYPE_RX        UINT32_C(0x2)
+	/* RoCE Notification Completion Ring (ROCE_CR) */
+	#define HWRM_RING_FREE_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+	/* RX Aggregation Ring */
+	#define HWRM_RING_FREE_INPUT_RING_TYPE_RX_AGG    UINT32_C(0x4)
+	/* Notification Queue */
+	#define HWRM_RING_FREE_INPUT_RING_TYPE_NQ        UINT32_C(0x5)
+	#define HWRM_RING_FREE_INPUT_RING_TYPE_LAST \
+		HWRM_RING_FREE_INPUT_RING_TYPE_NQ
+	uint8_t	unused_0;
+	/* Physical number of ring allocated. */
+	uint16_t	ring_id;
 	uint8_t	unused_1[4];
 } __attribute__((packed));
 
-/* hwrm_cfa_meter_instance_alloc_output (size:128b/16B) */
-struct hwrm_cfa_meter_instance_alloc_output {
+/* hwrm_ring_free_output (size:128b/16B) */
+struct hwrm_ring_free_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -23514,17 +17207,7 @@ struct hwrm_cfa_meter_instance_alloc_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* This value identifies a meter instance in CFA. */
-	uint16_t	meter_instance_id;
-	/*
-	 * A value of 0xfff is considered invalid and implies the
-	 * instance is not configured.
-	 */
-	#define HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_INVALID \
-		UINT32_C(0xffff)
-	#define HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_LAST \
-		HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_INVALID
-	uint8_t	unused_0[5];
+	uint8_t	unused_0[7];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -23535,13 +17218,13 @@ struct hwrm_cfa_meter_instance_alloc_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/********************************
- * hwrm_cfa_meter_instance_free *
- ********************************/
+/*******************
+ * hwrm_ring_reset *
+ *******************/
 
 
-/* hwrm_cfa_meter_instance_free_input (size:192b/24B) */
-struct hwrm_cfa_meter_instance_free_input {
+/* hwrm_ring_reset_input (size:192b/24B) */
+struct hwrm_ring_reset_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -23569,37 +17252,26 @@ struct hwrm_cfa_meter_instance_free_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	uint8_t	flags;
-	/*
-	 * Enumeration denoting the RX, TX type of the resource.
-	 * This enumeration is used for resources that are similar for both
-	 * TX and RX paths of the chip.
-	 */
-	#define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH     UINT32_C(0x1)
-	/* tx path */
-	#define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_TX \
-		UINT32_C(0x0)
-	/* rx path */
-	#define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX \
-		UINT32_C(0x1)
-	#define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_LAST \
-		HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX
+	/* Ring Type. */
+	uint8_t	ring_type;
+	/* L2 Completion Ring (CR) */
+	#define HWRM_RING_RESET_INPUT_RING_TYPE_L2_CMPL   UINT32_C(0x0)
+	/* TX Ring (TR) */
+	#define HWRM_RING_RESET_INPUT_RING_TYPE_TX        UINT32_C(0x1)
+	/* RX Ring (RR) */
+	#define HWRM_RING_RESET_INPUT_RING_TYPE_RX        UINT32_C(0x2)
+	/* RoCE Notification Completion Ring (ROCE_CR) */
+	#define HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+	#define HWRM_RING_RESET_INPUT_RING_TYPE_LAST \
+		HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL
 	uint8_t	unused_0;
-	/* This value identifies a meter instance in CFA. */
-	uint16_t	meter_instance_id;
-	/*
-	 * A value of 0xfff is considered invalid and implies the
-	 * instance is not configured.
-	 */
-	#define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID \
-		UINT32_C(0xffff)
-	#define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_LAST \
-		HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID
+	/* Physical number of the ring. */
+	uint16_t	ring_id;
 	uint8_t	unused_1[4];
 } __attribute__((packed));
 
-/* hwrm_cfa_meter_instance_free_output (size:128b/16B) */
-struct hwrm_cfa_meter_instance_free_output {
+/* hwrm_ring_reset_output (size:128b/16B) */
+struct hwrm_ring_reset_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -23619,13 +17291,13 @@ struct hwrm_cfa_meter_instance_free_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/*******************************
- * hwrm_cfa_decap_filter_alloc *
- *******************************/
+/*****************************************
+ * hwrm_ring_cmpl_ring_cfg_aggint_params *
+ *****************************************/
 
 
-/* hwrm_cfa_decap_filter_alloc_input (size:832b/104B) */
-struct hwrm_cfa_decap_filter_alloc_input {
+/* hwrm_ring_cmpl_ring_cfg_aggint_params_input (size:320b/40B) */
+struct hwrm_ring_cmpl_ring_cfg_aggint_params_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -23653,266 +17325,187 @@ struct hwrm_cfa_decap_filter_alloc_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	uint32_t	flags;
-	/* ovs_tunnel is 1 b */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_FLAGS_OVS_TUNNEL \
-		UINT32_C(0x1)
-	uint32_t	enables;
+	/* Physical number of completion ring. */
+	uint16_t	ring_id;
+	uint16_t	flags;
 	/*
-	 * This bit must be '1' for the tunnel_type field to be
-	 * configured.
+	 * When this bit is set to '1', interrupt latency max
+	 * timer is reset whenever a completion is received.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_TIMER_RESET \
 		UINT32_C(0x1)
 	/*
-	 * This bit must be '1' for the tunnel_id field to be
-	 * configured.
+	 * When this bit is set to '1', ring idle mode
+	 * aggregation will be enabled.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_ID \
+	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_RING_IDLE \
 		UINT32_C(0x2)
 	/*
-	 * This bit must be '1' for the src_macaddr field to be
-	 * configured.
+	 * Set this flag to 1 when configuring parameters on a
+	 * notification queue. Set this flag to 0 when configuring
+	 * parameters on a completion queue.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \
+	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_IS_NQ \
 		UINT32_C(0x4)
 	/*
-	 * This bit must be '1' for the dst_macaddr field to be
-	 * configured.
-	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \
-		UINT32_C(0x8)
-	/*
-	 * This bit must be '1' for the ovlan_vid field to be
-	 * configured.
+	 * Number of completions to aggregate before DMA
+	 * during the normal mode.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_OVLAN_VID \
-		UINT32_C(0x10)
+	uint16_t	num_cmpl_dma_aggr;
 	/*
-	 * This bit must be '1' for the ivlan_vid field to be
-	 * configured.
+	 * Number of completions to aggregate before DMA
+	 * during the interrupt mode.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IVLAN_VID \
-		UINT32_C(0x20)
+	uint16_t	num_cmpl_dma_aggr_during_int;
 	/*
-	 * This bit must be '1' for the t_ovlan_vid field to be
-	 * configured.
+	 * Timer in unit of 80-nsec used to aggregate completions before
+	 * DMA during the normal mode (not in interrupt mode).
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_T_OVLAN_VID \
-		UINT32_C(0x40)
+	uint16_t	cmpl_aggr_dma_tmr;
 	/*
-	 * This bit must be '1' for the t_ivlan_vid field to be
-	 * configured.
+	 * Timer in unit of 80-nsec used to aggregate completions before
+	 * DMA during the interrupt mode.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_T_IVLAN_VID \
-		UINT32_C(0x80)
+	uint16_t	cmpl_aggr_dma_tmr_during_int;
+	/* Minimum time (in unit of 80-nsec) between two interrupts. */
+	uint16_t	int_lat_tmr_min;
 	/*
-	 * This bit must be '1' for the ethertype field to be
-	 * configured.
+	 * Maximum wait time (in unit of 80-nsec) spent aggregating
+	 * cmpls before signaling the interrupt after the
+	 * interrupt is enabled.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \
-		UINT32_C(0x100)
+	uint16_t	int_lat_tmr_max;
 	/*
-	 * This bit must be '1' for the src_ipaddr field to be
-	 * configured.
+	 * Minimum number of completions aggregated before signaling
+	 * an interrupt.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \
-		UINT32_C(0x200)
+	uint16_t	num_cmpl_aggr_int;
 	/*
-	 * This bit must be '1' for the dst_ipaddr field to be
-	 * configured.
+	 * Bitfield that indicates which parameters are to be applied. Only
+	 * required when configuring devices with notification queues, and
+	 * used in that case to set certain parameters on completion queues
+	 * and others on notification queues.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \
-		UINT32_C(0x400)
+	uint16_t	enables;
 	/*
-	 * This bit must be '1' for the ipaddr_type field to be
+	 * This bit must be '1' for the num_cmpl_dma_aggr field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
-		UINT32_C(0x800)
+	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR \
+		UINT32_C(0x1)
 	/*
-	 * This bit must be '1' for the ip_protocol field to be
+	 * This bit must be '1' for the num_cmpl_dma_aggr_during_int field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
-		UINT32_C(0x1000)
+	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR_DURING_INT \
+		UINT32_C(0x2)
 	/*
-	 * This bit must be '1' for the src_port field to be
+	 * This bit must be '1' for the cmpl_aggr_dma_tmr field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \
-		UINT32_C(0x2000)
+	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_CMPL_AGGR_DMA_TMR \
+		UINT32_C(0x4)
 	/*
-	 * This bit must be '1' for the dst_port field to be
+	 * This bit must be '1' for the int_lat_tmr_min field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \
-		UINT32_C(0x4000)
+	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MIN \
+		UINT32_C(0x8)
 	/*
-	 * This bit must be '1' for the dst_id field to be
+	 * This bit must be '1' for the int_lat_tmr_max field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
-		UINT32_C(0x8000)
+	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MAX \
+		UINT32_C(0x10)
 	/*
-	 * This bit must be '1' for the mirror_vnic_id field to be
+	 * This bit must be '1' for the num_cmpl_aggr_int field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
-		UINT32_C(0x10000)
-	/*
-	 * Tunnel identifier.
-	 * Virtual Network Identifier (VNI). Only valid with
-	 * tunnel_types VXLAN, NVGRE, and Geneve.
-	 * Only lower 24-bits of VNI field are used
-	 * in setting up the filter.
-	 */
-	uint32_t	tunnel_id;
-	/* Tunnel Type. */
-	uint8_t	tunnel_type;
-	/* Non-tunnel */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
-		UINT32_C(0x0)
-	/* Virtual eXtensible Local Area Network (VXLAN) */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
-		UINT32_C(0x1)
-	/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
-		UINT32_C(0x2)
-	/* Generic Routing Encapsulation (GRE) inside Ethernet payload */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
-		UINT32_C(0x3)
-	/* IP in IP */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
-		UINT32_C(0x4)
-	/* Generic Network Virtualization Encapsulation (Geneve) */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
-		UINT32_C(0x5)
-	/* Multi-Protocol Lable Switching (MPLS) */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
-		UINT32_C(0x6)
-	/* Stateless Transport Tunnel (STT) */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
-		UINT32_C(0x7)
-	/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
-		UINT32_C(0x8)
-	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
-		UINT32_C(0x9)
-	/* Any tunneled traffic */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
-		UINT32_C(0xff)
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
-		HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
-	uint8_t	unused_0;
-	uint16_t	unused_1;
-	/*
-	 * This value indicates the source MAC address in
-	 * the Ethernet header.
-	 */
-	uint8_t	src_macaddr[6];
-	uint8_t	unused_2[2];
-	/*
-	 * This value indicates the destination MAC address in
-	 * the Ethernet header.
-	 */
-	uint8_t	dst_macaddr[6];
-	/*
-	 * This value indicates the VLAN ID of the outer VLAN tag
-	 * in the Ethernet header.
-	 */
-	uint16_t	ovlan_vid;
-	/*
-	 * This value indicates the VLAN ID of the inner VLAN tag
-	 * in the Ethernet header.
-	 */
-	uint16_t	ivlan_vid;
-	/*
-	 * This value indicates the VLAN ID of the outer VLAN tag
-	 * in the tunnel Ethernet header.
-	 */
-	uint16_t	t_ovlan_vid;
+	#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_AGGR_INT \
+		UINT32_C(0x20)
+	uint8_t	unused_0[4];
+} __attribute__((packed));
+
+/* hwrm_ring_cmpl_ring_cfg_aggint_params_output (size:128b/16B) */
+struct hwrm_ring_cmpl_ring_cfg_aggint_params_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	uint8_t	unused_0[7];
 	/*
-	 * This value indicates the VLAN ID of the inner VLAN tag
-	 * in the tunnel Ethernet header.
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
 	 */
-	uint16_t	t_ivlan_vid;
-	/* This value indicates the ethertype in the Ethernet header. */
-	uint16_t	ethertype;
+	uint8_t	valid;
+} __attribute__((packed));
+
+/***********************
+ * hwrm_ring_grp_alloc *
+ ***********************/
+
+
+/* hwrm_ring_grp_alloc_input (size:192b/24B) */
+struct hwrm_ring_grp_alloc_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
 	/*
-	 * This value indicates the type of IP address.
-	 * 4 - IPv4
-	 * 6 - IPv6
-	 * All others are invalid.
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
 	 */
-	uint8_t	ip_addr_type;
-	/* invalid */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \
-		UINT32_C(0x0)
-	/* IPv4 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \
-		UINT32_C(0x4)
-	/* IPv6 */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \
-		UINT32_C(0x6)
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
-		HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
+	uint16_t	cmpl_ring;
 	/*
-	 * The value of protocol filed in IP header.
-	 * Applies to UDP and TCP traffic.
-	 * 6 - TCP
-	 * 17 - UDP
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	uint8_t	ip_protocol;
-	/* invalid */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \
-		UINT32_C(0x0)
-	/* TCP */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \
-		UINT32_C(0x6)
-	/* UDP */
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \
-		UINT32_C(0x11)
-	#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \
-		HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP
-	uint16_t	unused_3;
-	uint32_t	unused_4;
+	uint16_t	seq_id;
 	/*
-	 * The value of source IP address to be used in filtering.
-	 * For IPv4, first four bytes represent the IP address.
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
 	 */
-	uint32_t	src_ipaddr[4];
+	uint16_t	target_id;
 	/*
-	 * The value of destination IP address to be used in filtering.
-	 * For IPv4, first four bytes represent the IP address.
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	uint32_t	dst_ipaddr[4];
+	uint64_t	resp_addr;
 	/*
-	 * The value of source port to be used in filtering.
-	 * Applies to UDP and TCP traffic.
+	 * This value identifies the CR associated with the ring
+	 * group.
 	 */
-	uint16_t	src_port;
+	uint16_t	cr;
 	/*
-	 * The value of destination port to be used in filtering.
-	 * Applies to UDP and TCP traffic.
+	 * This value identifies the main RR associated with the ring
+	 * group.
 	 */
-	uint16_t	dst_port;
+	uint16_t	rr;
 	/*
-	 * If set, this value shall represent the
-	 * Logical VNIC ID of the destination VNIC for the RX
-	 * path.
+	 * This value identifies the aggregation RR associated with
+	 * the ring group.  If this value is 0xFF... (All Fs), then no
+	 * Aggregation ring will be set.
 	 */
-	uint16_t	dst_id;
+	uint16_t	ar;
 	/*
-	 * If set, this value shall represent the L2 context that matches the L2
-	 * information of the decap filter.
+	 * This value identifies the statistics context associated
+	 * with the ring group.
 	 */
-	uint16_t	l2_ctxt_ref_id;
+	uint16_t	sc;
 } __attribute__((packed));
 
-/* hwrm_cfa_decap_filter_alloc_output (size:128b/16B) */
-struct hwrm_cfa_decap_filter_alloc_output {
+/* hwrm_ring_grp_alloc_output (size:128b/16B) */
+struct hwrm_ring_grp_alloc_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -23921,8 +17514,12 @@ struct hwrm_cfa_decap_filter_alloc_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* This value is an opaque id into CFA data structures. */
-	uint32_t	decap_filter_id;
+	/*
+	 * This is the ring group ID value.  Use this value to program
+	 * the default ring group for the VNIC or as table entries
+	 * in an RSS/COS context.
+	 */
+	uint32_t	ring_group_id;
 	uint8_t	unused_0[3];
 	/*
 	 * This field is used in Output records to indicate that the output
@@ -23934,13 +17531,13 @@ struct hwrm_cfa_decap_filter_alloc_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/******************************
- * hwrm_cfa_decap_filter_free *
- ******************************/
+/**********************
+ * hwrm_ring_grp_free *
+ **********************/
 
 
-/* hwrm_cfa_decap_filter_free_input (size:192b/24B) */
-struct hwrm_cfa_decap_filter_free_input {
+/* hwrm_ring_grp_free_input (size:192b/24B) */
+struct hwrm_ring_grp_free_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -23968,13 +17565,13 @@ struct hwrm_cfa_decap_filter_free_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	/* This value is an opaque id into CFA data structures. */
-	uint32_t	decap_filter_id;
+	/* This is the ring group ID value. */
+	uint32_t	ring_group_id;
 	uint8_t	unused_0[4];
 } __attribute__((packed));
 
-/* hwrm_cfa_decap_filter_free_output (size:128b/16B) */
-struct hwrm_cfa_decap_filter_free_output {
+/* hwrm_ring_grp_free_output (size:128b/16B) */
+struct hwrm_ring_grp_free_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -23994,250 +17591,376 @@ struct hwrm_cfa_decap_filter_free_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/***********************
- * hwrm_cfa_flow_alloc *
- ***********************/
+/****************************
+ * hwrm_cfa_l2_filter_alloc *
+ ****************************/
 
 
-/* hwrm_cfa_flow_alloc_input (size:1024b/128B) */
-struct hwrm_cfa_flow_alloc_input {
+/* hwrm_cfa_l2_filter_alloc_input (size:768b/96B) */
+struct hwrm_cfa_l2_filter_alloc_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
 	 * The completion ring to send the completion event on. This should
 	 * be the NQ ID returned from the `nq_alloc` HWRM command.
 	 */
-	uint16_t	cmpl_ring;
+	uint16_t	cmpl_ring;
+	/*
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 */
+	uint16_t	seq_id;
+	/*
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
+	 */
+	uint16_t	target_id;
+	/*
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
+	 */
+	uint64_t	resp_addr;
+	uint32_t	flags;
+	/*
+	 * Enumeration denoting the RX, TX type of the resource.
+	 * This enumeration is used for resources that are similar for both
+	 * TX and RX paths of the chip.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH \
+		UINT32_C(0x1)
+	/* tx path */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \
+		UINT32_C(0x0)
+	/* rx path */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \
+		UINT32_C(0x1)
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
+		HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
+	/* Setting of this flag indicates the applicability to the loopback path. */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
+		UINT32_C(0x2)
+	/*
+	 * Setting of this flag indicates drop action. If this flag is not set,
+	 * then it should be considered accept action.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP \
+		UINT32_C(0x4)
+	/*
+	 * If this flag is set, all t_l2_* fields are invalid
+	 * and they should not be specified.
+	 * If this flag is set, then l2_* fields refer to
+	 * fields of outermost L2 header.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST \
+		UINT32_C(0x8)
+	/*
+	 * Enumeration denoting NO_ROCE_L2 to support old drivers.
+	 * New driver L2 for only L2 traffic, ROCE for roce and l2 traffic
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_MASK \
+		UINT32_C(0x30)
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_SFT       4
+	/* To support old drivers */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_NO_ROCE_L2 \
+		(UINT32_C(0x0) << 4)
+	/* Only L2 traffic */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_L2 \
+		(UINT32_C(0x1) << 4)
+	/* Roce & L2 traffic */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_ROCE \
+		(UINT32_C(0x2) << 4)
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_LAST \
+		HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_TRAFFIC_ROCE
+	uint32_t	enables;
+	/*
+	 * This bit must be '1' for the l2_addr field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \
+		UINT32_C(0x1)
+	/*
+	 * This bit must be '1' for the l2_addr_mask field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \
+		UINT32_C(0x2)
+	/*
+	 * This bit must be '1' for the l2_ovlan field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN \
+		UINT32_C(0x4)
+	/*
+	 * This bit must be '1' for the l2_ovlan_mask field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \
+		UINT32_C(0x8)
+	/*
+	 * This bit must be '1' for the l2_ivlan field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \
+		UINT32_C(0x10)
+	/*
+	 * This bit must be '1' for the l2_ivlan_mask field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \
+		UINT32_C(0x20)
+	/*
+	 * This bit must be '1' for the t_l2_addr field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR \
+		UINT32_C(0x40)
+	/*
+	 * This bit must be '1' for the t_l2_addr_mask field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \
+		UINT32_C(0x80)
+	/*
+	 * This bit must be '1' for the t_l2_ovlan field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \
+		UINT32_C(0x100)
+	/*
+	 * This bit must be '1' for the t_l2_ovlan_mask field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \
+		UINT32_C(0x200)
+	/*
+	 * This bit must be '1' for the t_l2_ivlan field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \
+		UINT32_C(0x400)
+	/*
+	 * This bit must be '1' for the t_l2_ivlan_mask field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \
+		UINT32_C(0x800)
+	/*
+	 * This bit must be '1' for the src_type field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE \
+		UINT32_C(0x1000)
 	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 * This bit must be '1' for the src_id field to be
+	 * configured.
 	 */
-	uint16_t	seq_id;
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID \
+		UINT32_C(0x2000)
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * This bit must be '1' for the tunnel_type field to be
+	 * configured.
 	 */
-	uint16_t	target_id;
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+		UINT32_C(0x4000)
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * This bit must be '1' for the dst_id field to be
+	 * configured.
 	 */
-	uint64_t	resp_addr;
-	uint16_t	flags;
-	/* tunnel is 1 b */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_TUNNEL       UINT32_C(0x1)
-	/* num_vlan is 2 b */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_MASK UINT32_C(0x6)
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_SFT 1
-	/* no tags */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_NONE \
-		(UINT32_C(0x0) << 1)
-	/* 1 tag */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_ONE \
-		(UINT32_C(0x1) << 1)
-	/* 2 tags */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_TWO \
-		(UINT32_C(0x2) << 1)
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_LAST \
-		HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_TWO
-	/* Enumeration denoting the Flow Type. */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_MASK UINT32_C(0x38)
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_SFT 3
-	/* L2 flow */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_L2 \
-		(UINT32_C(0x0) << 3)
-	/* IPV4 flow */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV4 \
-		(UINT32_C(0x1) << 3)
-	/* IPV6 flow */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6 \
-		(UINT32_C(0x2) << 3)
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_LAST \
-		HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
+		UINT32_C(0x8000)
 	/*
-	 * Tx Flow: vf fid.
-	 * Rx Flow: pf fid.
+	 * This bit must be '1' for the mirror_vnic_id field to be
+	 * configured.
 	 */
-	uint16_t	src_fid;
-	/* Tunnel handle valid when tunnel flag is set. */
-	uint32_t	tunnel_handle;
-	uint16_t	action_flags;
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+		UINT32_C(0x10000)
 	/*
-	 * Setting of this flag indicates drop action. If this flag is not set,
-	 * then it should be considered accept action.
+	 * This value sets the match value for the L2 MAC address.
+	 * Destination MAC address for RX path.
+	 * Source MAC address for TX path.
 	 */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_FWD \
-		UINT32_C(0x1)
-	/* recycle is 1 b */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_RECYCLE \
-		UINT32_C(0x2)
+	uint8_t	l2_addr[6];
+	uint8_t	unused_0[2];
 	/*
-	 * Setting of this flag indicates drop action. If this flag is not set,
-	 * then it should be considered accept action.
+	 * This value sets the mask value for the L2 address.
+	 * A value of 0 will mask the corresponding bit from
+	 * compare.
 	 */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_DROP \
-		UINT32_C(0x4)
-	/* meter is 1 b */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_METER \
-		UINT32_C(0x8)
-	/* tunnel is 1 b */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TUNNEL \
-		UINT32_C(0x10)
-	/* nat_src is 1 b */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_SRC \
-		UINT32_C(0x20)
-	/* nat_dest is 1 b */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_DEST \
-		UINT32_C(0x40)
-	/* nat_ipv4_address is 1 b */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_IPV4_ADDRESS \
-		UINT32_C(0x80)
-	/* l2_header_rewrite is 1 b */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_L2_HEADER_REWRITE \
-		UINT32_C(0x100)
-	/* ttl_decrement is 1 b */
-	#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TTL_DECREMENT \
-		UINT32_C(0x200)
+	uint8_t	l2_addr_mask[6];
+	/* This value sets VLAN ID value for outer VLAN. */
+	uint16_t	l2_ovlan;
 	/*
-	 * Tx Flow: pf or vf fid.
-	 * Rx Flow: vf fid.
-	 */
-	uint16_t	dst_fid;
-	/* VLAN tpid, valid when push_vlan flag is set. */
-	uint16_t	l2_rewrite_vlan_tpid;
-	/* VLAN tci, valid when push_vlan flag is set. */
-	uint16_t	l2_rewrite_vlan_tci;
-	/* Meter id, valid when meter flag is set. */
-	uint16_t	act_meter_id;
-	/* Flow with the same l2 context tcam key. */
-	uint16_t	ref_flow_handle;
-	/* This value sets the match value for the ethertype. */
-	uint16_t	ethertype;
-	/* valid when num tags is 1 or 2. */
-	uint16_t	outer_vlan_tci;
-	/* This value sets the match value for the Destination MAC address. */
-	uint16_t	dmac[3];
-	/* valid when num tags is 2. */
-	uint16_t	inner_vlan_tci;
-	/* This value sets the match value for the Source MAC address. */
-	uint16_t	smac[3];
-	/* The bit length of destination IP address mask. */
-	uint8_t	ip_dst_mask_len;
-	/* The bit length of source IP address mask. */
-	uint8_t	ip_src_mask_len;
-	/* The value of destination IPv4/IPv6 address. */
-	uint32_t	ip_dst[4];
-	/* The source IPv4/IPv6 address. */
-	uint32_t	ip_src[4];
-	/*
-	 * The value of source port.
-	 * Applies to UDP and TCP traffic.
+	 * This value sets the mask value for the ovlan id.
+	 * A value of 0 will mask the corresponding bit from
+	 * compare.
 	 */
-	uint16_t	l4_src_port;
+	uint16_t	l2_ovlan_mask;
+	/* This value sets VLAN ID value for inner VLAN. */
+	uint16_t	l2_ivlan;
 	/*
-	 * The value of source port mask.
-	 * Applies to UDP and TCP traffic.
+	 * This value sets the mask value for the ivlan id.
+	 * A value of 0 will mask the corresponding bit from
+	 * compare.
 	 */
-	uint16_t	l4_src_port_mask;
+	uint16_t	l2_ivlan_mask;
+	uint8_t	unused_1[2];
 	/*
-	 * The value of destination port.
-	 * Applies to UDP and TCP traffic.
+	 * This value sets the match value for the tunnel
+	 * L2 MAC address.
+	 * Destination MAC address for RX path.
+	 * Source MAC address for TX path.
 	 */
-	uint16_t	l4_dst_port;
+	uint8_t	t_l2_addr[6];
+	uint8_t	unused_2[2];
 	/*
-	 * The value of destination port mask.
-	 * Applies to UDP and TCP traffic.
+	 * This value sets the mask value for the tunnel L2
+	 * address.
+	 * A value of 0 will mask the corresponding bit from
+	 * compare.
 	 */
-	uint16_t	l4_dst_port_mask;
+	uint8_t	t_l2_addr_mask[6];
+	/* This value sets VLAN ID value for tunnel outer VLAN. */
+	uint16_t	t_l2_ovlan;
 	/*
-	 * NAT IPv4/6 address based on address type flag.
-	 * 0 values are ignored.
+	 * This value sets the mask value for the tunnel ovlan id.
+	 * A value of 0 will mask the corresponding bit from
+	 * compare.
 	 */
-	uint32_t	nat_ip_address[4];
-	/* L2 header re-write Destination MAC address. */
-	uint16_t	l2_rewrite_dmac[3];
+	uint16_t	t_l2_ovlan_mask;
+	/* This value sets VLAN ID value for tunnel inner VLAN. */
+	uint16_t	t_l2_ivlan;
 	/*
-	 * The NAT source/destination port based on direction flag.
-	 * Applies to UDP and TCP traffic.
-	 * 0 values are ignored.
+	 * This value sets the mask value for the tunnel ivlan id.
+	 * A value of 0 will mask the corresponding bit from
+	 * compare.
 	 */
-	uint16_t	nat_port;
-	/* L2 header re-write Source MAC address. */
-	uint16_t	l2_rewrite_smac[3];
-	/* The value of ip protocol. */
-	uint8_t	ip_proto;
-	uint8_t	unused_0;
-} __attribute__((packed));
-
-/* hwrm_cfa_flow_alloc_output (size:128b/16B) */
-struct hwrm_cfa_flow_alloc_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* Flow record index. */
-	uint16_t	flow_handle;
-	uint8_t	unused_0[5];
+	uint16_t	t_l2_ivlan_mask;
+	/* This value identifies the type of source of the packet. */
+	uint8_t	src_type;
+	/* Network port */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0)
+	/* Physical function */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF    UINT32_C(0x1)
+	/* Virtual function */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF    UINT32_C(0x2)
+	/* Virtual NIC of a function */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC  UINT32_C(0x3)
+	/* Embedded processor for CFA management */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG  UINT32_C(0x4)
+	/* Embedded processor for OOB management */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE   UINT32_C(0x5)
+	/* Embedded processor for RoCE */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO  UINT32_C(0x6)
+	/* Embedded processor for network proxy functions */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG  UINT32_C(0x7)
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_LAST \
+		HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG
+	uint8_t	unused_3;
 	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
+	 * This value is the id of the source.
+	 * For a network port, it represents port_id.
+	 * For a physical function, it represents fid.
+	 * For a virtual function, it represents vf_id.
+	 * For a vnic, it represents vnic_id.
+	 * For embedded processors, this id is not valid.
+	 *
+	 * Notes:
+	 * 1. The function ID is implied if it src_id is
+	 *    not provided for a src_type that is either
 	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**********************
- * hwrm_cfa_flow_free *
- **********************/
-
-
-/* hwrm_cfa_flow_free_input (size:192b/24B) */
-struct hwrm_cfa_flow_free_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
+	uint32_t	src_id;
+	/* Tunnel Type. */
+	uint8_t	tunnel_type;
+	/* Non-tunnel */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+		UINT32_C(0x0)
+	/* Virtual eXtensible Local Area Network (VXLAN) */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+		UINT32_C(0x1)
+	/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+		UINT32_C(0x2)
+	/* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+		UINT32_C(0x3)
+	/* IP in IP */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+		UINT32_C(0x4)
+	/* Generic Network Virtualization Encapsulation (Geneve) */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+		UINT32_C(0x5)
+	/* Multi-Protocol Lable Switching (MPLS) */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+		UINT32_C(0x6)
+	/* Stateless Transport Tunnel (STT) */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
+		UINT32_C(0x7)
+	/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+		UINT32_C(0x8)
+	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+		UINT32_C(0x9)
+	/* Any tunneled traffic */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+		UINT32_C(0xff)
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+		HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
+	uint8_t	unused_4;
 	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
+	 * If set, this value shall represent the
+	 * Logical VNIC ID of the destination VNIC for the RX
+	 * path and network port id of the destination port for
+	 * the TX path.
 	 */
-	uint16_t	cmpl_ring;
+	uint16_t	dst_id;
 	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 * Logical VNIC ID of the VNIC where traffic is
+	 * mirrored.
 	 */
-	uint16_t	seq_id;
+	uint16_t	mirror_vnic_id;
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * This hint is provided to help in placing
+	 * the filter in the filter table.
 	 */
-	uint16_t	target_id;
+	uint8_t	pri_hint;
+	/* No preference */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
+		UINT32_C(0x0)
+	/* Above the given filter */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \
+		UINT32_C(0x1)
+	/* Below the given filter */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \
+		UINT32_C(0x2)
+	/* As high as possible */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX \
+		UINT32_C(0x3)
+	/* As low as possible */
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN \
+		UINT32_C(0x4)
+	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_LAST \
+		HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN
+	uint8_t	unused_5;
+	uint32_t	unused_6;
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* Flow record index. */
-	uint16_t	flow_handle;
-	uint8_t	unused_0[6];
+	 * This is the ID of the filter that goes along with
+	 * the pri_hint.
+	 *
+	 * This field is valid only for the following values.
+	 * 1 - Above the given filter
+	 * 2 - Below the given filter
+	 */
+	uint64_t	l2_filter_id_hint;
 } __attribute__((packed));
 
-/* hwrm_cfa_flow_free_output (size:256b/32B) */
-struct hwrm_cfa_flow_free_output {
+/* hwrm_cfa_l2_filter_alloc_output (size:192b/24B) */
+struct hwrm_cfa_l2_filter_alloc_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -24246,11 +17969,20 @@ struct hwrm_cfa_flow_free_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* packet is 64 b */
-	uint64_t	packet;
-	/* byte is 64 b */
-	uint64_t	byte;
-	uint8_t	unused_0[7];
+	/*
+	 * This value identifies a set of CFA data structures used for an L2
+	 * context.
+	 */
+	uint64_t	l2_filter_id;
+	/*
+	 * This is the ID of the flow associated with this
+	 * filter.
+	 * This value shall be used to match and associate the
+	 * flow identifier returned in completion records.
+	 * A value of 0xFFFFFFFF shall indicate no flow id.
+	 */
+	uint32_t	flow_id;
+	uint8_t	unused_0[3];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -24261,13 +17993,13 @@ struct hwrm_cfa_flow_free_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/**********************
- * hwrm_cfa_flow_info *
- **********************/
+/***************************
+ * hwrm_cfa_l2_filter_free *
+ ***************************/
 
 
-/* hwrm_cfa_flow_info_input (size:192b/24B) */
-struct hwrm_cfa_flow_info_input {
+/* hwrm_cfa_l2_filter_free_input (size:192b/24B) */
+struct hwrm_cfa_l2_filter_free_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -24295,23 +18027,15 @@ struct hwrm_cfa_flow_info_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	/* Flow record index. */
-	uint16_t	flow_handle;
-	/* Max flow handle */
-	#define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_MAX_MASK \
-		UINT32_C(0xfff)
-	#define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_MAX_SFT     0
-	/* CNP flow handle */
-	#define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_CNP_CNT \
-		UINT32_C(0x1000)
-	/* Direction rx = 1 */
-	#define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_DIR_RX \
-		UINT32_C(0x8000)
-	uint8_t	unused_0[6];
+	/*
+	 * This value identifies a set of CFA data structures used for an L2
+	 * context.
+	 */
+	uint64_t	l2_filter_id;
 } __attribute__((packed));
 
-/* hwrm_cfa_flow_info_output (size:448b/56B) */
-struct hwrm_cfa_flow_info_output {
+/* hwrm_cfa_l2_filter_free_output (size:128b/16B) */
+struct hwrm_cfa_l2_filter_free_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -24320,28 +18044,6 @@ struct hwrm_cfa_flow_info_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* flags is 8 b */
-	uint8_t	flags;
-	/* profile is 8 b */
-	uint8_t	profile;
-	/* src_fid is 16 b */
-	uint16_t	src_fid;
-	/* dst_fid is 16 b */
-	uint16_t	dst_fid;
-	/* l2_ctxt_id is 16 b */
-	uint16_t	l2_ctxt_id;
-	/* em_info is 64 b */
-	uint64_t	em_info;
-	/* tcam_info is 64 b */
-	uint64_t	tcam_info;
-	/* vfp_tcam_info is 64 b */
-	uint64_t	vfp_tcam_info;
-	/* ar_id is 16 b */
-	uint16_t	ar_id;
-	/* flow_handle is 16 b */
-	uint16_t	flow_handle;
-	/* tunnel_handle is 32 b */
-	uint32_t	tunnel_handle;
 	uint8_t	unused_0[7];
 	/*
 	 * This field is used in Output records to indicate that the output
@@ -24353,13 +18055,13 @@ struct hwrm_cfa_flow_info_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/***********************
- * hwrm_cfa_flow_flush *
- ***********************/
+/**************************
+ * hwrm_cfa_l2_filter_cfg *
+ **************************/
 
 
-/* hwrm_cfa_flow_flush_input (size:192b/24B) */
-struct hwrm_cfa_flow_flush_input {
+/* hwrm_cfa_l2_filter_cfg_input (size:320b/40B) */
+struct hwrm_cfa_l2_filter_cfg_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -24388,11 +18090,79 @@ struct hwrm_cfa_flow_flush_input {
 	 */
 	uint64_t	resp_addr;
 	uint32_t	flags;
-	uint8_t	unused_0[4];
+	/*
+	 * Enumeration denoting the RX, TX type of the resource.
+	 * This enumeration is used for resources that are similar for both
+	 * TX and RX paths of the chip.
+	 */
+	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH \
+		UINT32_C(0x1)
+	/* tx path */
+	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX \
+		UINT32_C(0x0)
+	/* rx path */
+	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX \
+		UINT32_C(0x1)
+	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \
+		HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX
+	/*
+	 * Setting of this flag indicates drop action. If this flag is not set,
+	 * then it should be considered accept action.
+	 */
+	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP \
+		UINT32_C(0x2)
+	/*
+	 * Enumeration denoting NO_ROCE_L2 to support old drivers.
+	 * New driver L2 for only L2 traffic, ROCE for roce and l2 traffic
+	 */
+	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_MASK \
+		UINT32_C(0xc)
+	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_SFT       2
+	/* To support old drivers */
+	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_NO_ROCE_L2 \
+		(UINT32_C(0x0) << 2)
+	/* Only L2 traffic */
+	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_L2 \
+		(UINT32_C(0x1) << 2)
+	/* Roce & L2 traffic */
+	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_ROCE \
+		(UINT32_C(0x2) << 2)
+	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_LAST \
+		HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_TRAFFIC_ROCE
+	uint32_t	enables;
+	/*
+	 * This bit must be '1' for the dst_id field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID \
+		UINT32_C(0x1)
+	/*
+	 * This bit must be '1' for the new_mirror_vnic_id field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
+		UINT32_C(0x2)
+	/*
+	 * This value identifies a set of CFA data structures used for an L2
+	 * context.
+	 */
+	uint64_t	l2_filter_id;
+	/*
+	 * If set, this value shall represent the
+	 * Logical VNIC ID of the destination VNIC for the RX
+	 * path and network port id of the destination port for
+	 * the TX path.
+	 */
+	uint32_t	dst_id;
+	/*
+	 * New Logical VNIC ID of the VNIC where traffic is
+	 * mirrored.
+	 */
+	uint32_t	new_mirror_vnic_id;
 } __attribute__((packed));
 
-/* hwrm_cfa_flow_flush_output (size:128b/16B) */
-struct hwrm_cfa_flow_flush_output {
+/* hwrm_cfa_l2_filter_cfg_output (size:128b/16B) */
+struct hwrm_cfa_l2_filter_cfg_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -24412,13 +18182,13 @@ struct hwrm_cfa_flow_flush_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/***********************
- * hwrm_cfa_flow_stats *
- ***********************/
+/***************************
+ * hwrm_cfa_l2_set_rx_mask *
+ ***************************/
 
 
-/* hwrm_cfa_flow_stats_input (size:320b/40B) */
-struct hwrm_cfa_flow_stats_input {
+/* hwrm_cfa_l2_set_rx_mask_input (size:448b/56B) */
+struct hwrm_cfa_l2_set_rx_mask_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -24446,137 +18216,134 @@ struct hwrm_cfa_flow_stats_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	/* Flow handle. */
-	uint16_t	num_flows;
-	/* Flow handle. */
-	uint16_t	flow_handle_0;
-	/* Flow handle. */
-	uint16_t	flow_handle_1;
-	/* Flow handle. */
-	uint16_t	flow_handle_2;
-	/* Flow handle. */
-	uint16_t	flow_handle_3;
-	/* Flow handle. */
-	uint16_t	flow_handle_4;
-	/* Flow handle. */
-	uint16_t	flow_handle_5;
-	/* Flow handle. */
-	uint16_t	flow_handle_6;
-	/* Flow handle. */
-	uint16_t	flow_handle_7;
-	/* Flow handle. */
-	uint16_t	flow_handle_8;
-	/* Flow handle. */
-	uint16_t	flow_handle_9;
-	uint8_t	unused_0[2];
-} __attribute__((packed));
-
-/* hwrm_cfa_flow_stats_output (size:1408b/176B) */
-struct hwrm_cfa_flow_stats_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* packet_0 is 64 b */
-	uint64_t	packet_0;
-	/* packet_1 is 64 b */
-	uint64_t	packet_1;
-	/* packet_2 is 64 b */
-	uint64_t	packet_2;
-	/* packet_3 is 64 b */
-	uint64_t	packet_3;
-	/* packet_4 is 64 b */
-	uint64_t	packet_4;
-	/* packet_5 is 64 b */
-	uint64_t	packet_5;
-	/* packet_6 is 64 b */
-	uint64_t	packet_6;
-	/* packet_7 is 64 b */
-	uint64_t	packet_7;
-	/* packet_8 is 64 b */
-	uint64_t	packet_8;
-	/* packet_9 is 64 b */
-	uint64_t	packet_9;
-	/* byte_0 is 64 b */
-	uint64_t	byte_0;
-	/* byte_1 is 64 b */
-	uint64_t	byte_1;
-	/* byte_2 is 64 b */
-	uint64_t	byte_2;
-	/* byte_3 is 64 b */
-	uint64_t	byte_3;
-	/* byte_4 is 64 b */
-	uint64_t	byte_4;
-	/* byte_5 is 64 b */
-	uint64_t	byte_5;
-	/* byte_6 is 64 b */
-	uint64_t	byte_6;
-	/* byte_7 is 64 b */
-	uint64_t	byte_7;
-	/* byte_8 is 64 b */
-	uint64_t	byte_8;
-	/* byte_9 is 64 b */
-	uint64_t	byte_9;
-	uint8_t	unused_0[7];
+	/* VNIC ID */
+	uint32_t	vnic_id;
+	uint32_t	mask;
 	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
+	 * When this bit is '1', the function is requested to accept
+	 * multi-cast packets specified by the multicast addr table.
 	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**************************
- * hwrm_cfa_vf_pair_alloc *
- **************************/
-
-
-/* hwrm_cfa_vf_pair_alloc_input (size:448b/56B) */
-struct hwrm_cfa_vf_pair_alloc_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
+	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST \
+		UINT32_C(0x2)
 	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
+	 * When this bit is '1', the function is requested to accept
+	 * all multi-cast packets.
 	 */
-	uint16_t	cmpl_ring;
+	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST \
+		UINT32_C(0x4)
 	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 * When this bit is '1', the function is requested to accept
+	 * broadcast packets.
 	 */
-	uint16_t	seq_id;
+	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST \
+		UINT32_C(0x8)
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * When this bit is '1', the function is requested to be
+	 * put in the promiscuous mode.
+	 *
+	 * The HWRM should accept any function to set up
+	 * promiscuous mode.
+	 *
+	 * The HWRM shall follow the semantics below for the
+	 * promiscuous mode support.
+	 * # When partitioning is not enabled on a port
+	 * (i.e. single PF on the port), then the PF shall
+	 * be allowed to be in the promiscuous mode. When the
+	 * PF is in the promiscuous mode, then it shall
+	 * receive all host bound traffic on that port.
+	 * # When partitioning is enabled on a port
+	 * (i.e. multiple PFs per port) and a PF on that
+	 * port is in the promiscuous mode, then the PF
+	 * receives all traffic within that partition as
+	 * identified by a unique identifier for the
+	 * PF (e.g. S-Tag). If a unique outer VLAN
+	 * for the PF is specified, then the setting of
+	 * promiscuous mode on that PF shall result in the
+	 * PF receiving all host bound traffic with matching
+	 * outer VLAN.
+	 * # A VF shall can be set in the promiscuous mode.
+	 * In the promiscuous mode, the VF does not receive any
+	 * traffic unless a unique outer VLAN for the
+	 * VF is specified. If a unique outer VLAN
+	 * for the VF is specified, then the setting of
+	 * promiscuous mode on that VF shall result in the
+	 * VF receiving all host bound traffic with the
+	 * matching outer VLAN.
+	 * # The HWRM shall allow the setting of promiscuous
+	 * mode on a function independently from the
+	 * promiscuous mode settings on other functions.
 	 */
-	uint16_t	target_id;
+	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS \
+		UINT32_C(0x10)
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * If this flag is set, the corresponding RX
+	 * filters shall be set up to cover multicast/broadcast
+	 * filters for the outermost Layer 2 destination MAC
+	 * address field.
+	 */
+	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST \
+		UINT32_C(0x20)
+	/*
+	 * If this flag is set, the corresponding RX
+	 * filters shall be set up to cover multicast/broadcast
+	 * filters for the VLAN-tagged packets that match the
+	 * TPID and VID fields of VLAN tags in the VLAN tag
+	 * table specified in this command.
+	 */
+	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY \
+		UINT32_C(0x40)
+	/*
+	 * If this flag is set, the corresponding RX
+	 * filters shall be set up to cover multicast/broadcast
+	 * filters for non-VLAN tagged packets and VLAN-tagged
+	 * packets that match the TPID and VID fields of VLAN
+	 * tags in the VLAN tag table specified in this command.
+	 */
+	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN \
+		UINT32_C(0x80)
+	/*
+	 * If this flag is set, the corresponding RX
+	 * filters shall be set up to cover multicast/broadcast
+	 * filters for non-VLAN tagged packets and VLAN-tagged
+	 * packets matching any VLAN tag.
+	 *
+	 * If this flag is set, then the HWRM shall ignore
+	 * VLAN tags specified in vlan_tag_tbl.
+	 *
+	 * If none of vlanonly, vlan_nonvlan, and anyvlan_nonvlan
+	 * flags is set, then the HWRM shall ignore
+	 * VLAN tags specified in vlan_tag_tbl.
+	 *
+	 * The HWRM client shall set at most one flag out of
+	 * vlanonly, vlan_nonvlan, and anyvlan_nonvlan.
+	 */
+	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN \
+		UINT32_C(0x100)
+	/* This is the address for mcast address tbl. */
+	uint64_t	mc_tbl_addr;
+	/*
+	 * This value indicates how many entries in mc_tbl are valid.
+	 * Each entry is 6 bytes.
+	 */
+	uint32_t	num_mc_entries;
+	uint8_t	unused_0[4];
+	/*
+	 * This is the address for VLAN tag table.
+	 * Each VLAN entry in the table is 4 bytes of a VLAN tag
+	 * including TPID, PCP, DEI, and VID fields in network byte
+	 * order.
+	 */
+	uint64_t	vlan_tag_tbl_addr;
+	/*
+	 * This value indicates how many entries in vlan_tag_tbl are
+	 * valid. Each entry is 4 bytes.
 	 */
-	uint64_t	resp_addr;
-	/* Logical VF number (range: 0 -> MAX_VFS -1). */
-	uint16_t	vf_a_id;
-	/* Logical VF number (range: 0 -> MAX_VFS -1). */
-	uint16_t	vf_b_id;
-	uint8_t	unused_0[4];
-	/* VF Pair name (32 byte string). */
-	char	pair_name[32];
+	uint32_t	num_vlan_tags;
+	uint8_t	unused_1[4];
 } __attribute__((packed));
 
-/* hwrm_cfa_vf_pair_alloc_output (size:128b/16B) */
-struct hwrm_cfa_vf_pair_alloc_output {
+/* hwrm_cfa_l2_set_rx_mask_output (size:128b/16B) */
+struct hwrm_cfa_l2_set_rx_mask_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -24596,13 +18363,31 @@ struct hwrm_cfa_vf_pair_alloc_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/*************************
- * hwrm_cfa_vf_pair_free *
- *************************/
+/* hwrm_cfa_l2_set_rx_mask_cmd_err (size:64b/8B) */
+struct hwrm_cfa_l2_set_rx_mask_cmd_err {
+	/*
+	 * command specific error codes that goes to
+	 * the cmd_err field in Common HWRM Error Response.
+	 */
+	uint8_t	code;
+	/* Unknown error */
+	#define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_UNKNOWN \
+		UINT32_C(0x0)
+	/* Unable to complete operation due to conflict with Ntuple Filter */
+	#define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR \
+		UINT32_C(0x1)
+	#define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_LAST \
+		HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR
+	uint8_t	unused_0[7];
+} __attribute__((packed));
+
+/*******************************
+ * hwrm_cfa_vlan_antispoof_cfg *
+ *******************************/
 
 
-/* hwrm_cfa_vf_pair_free_input (size:384b/48B) */
-struct hwrm_cfa_vf_pair_free_input {
+/* hwrm_cfa_vlan_antispoof_cfg_input (size:256b/32B) */
+struct hwrm_cfa_vlan_antispoof_cfg_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -24630,12 +18415,27 @@ struct hwrm_cfa_vf_pair_free_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	/* VF Pair name (32 byte string). */
-	char	pair_name[32];
+	/*
+	 * Function ID of the function that is being configured.
+	 * Only valid for a VF FID configured by the PF.
+	 */
+	uint16_t	fid;
+	uint8_t	unused_0[2];
+	/* Number of VLAN entries in the vlan_tag_mask_tbl. */
+	uint32_t	num_vlan_entries;
+	/*
+	 * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN
+	 * antispoof table. Each table entry contains the 16-bit TPID
+	 * (0x8100 or 0x88a8 only), 16-bit VLAN ID, and a 16-bit mask,
+	 * all in network order to match hwrm_cfa_l2_set_rx_mask.
+	 * For an individual VLAN entry, the mask value should be 0xfff
+	 * for the 12-bit VLAN ID.
+	 */
+	uint64_t	vlan_tag_mask_tbl_addr;
 } __attribute__((packed));
 
-/* hwrm_cfa_vf_pair_free_output (size:128b/16B) */
-struct hwrm_cfa_vf_pair_free_output {
+/* hwrm_cfa_vlan_antispoof_cfg_output (size:128b/16B) */
+struct hwrm_cfa_vlan_antispoof_cfg_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -24655,13 +18455,13 @@ struct hwrm_cfa_vf_pair_free_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/*************************
- * hwrm_cfa_vf_pair_info *
- *************************/
+/********************************
+ * hwrm_cfa_vlan_antispoof_qcfg *
+ ********************************/
 
 
-/* hwrm_cfa_vf_pair_info_input (size:448b/56B) */
-struct hwrm_cfa_vf_pair_info_input {
+/* hwrm_cfa_vlan_antispoof_qcfg_input (size:256b/32B) */
+struct hwrm_cfa_vlan_antispoof_qcfg_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -24689,18 +18489,30 @@ struct hwrm_cfa_vf_pair_info_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	uint32_t	flags;
-	/* If this flag is set, lookup by name else lookup by index. */
-	#define HWRM_CFA_VF_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE     UINT32_C(0x1)
-	/* vf pair table index. */
-	uint16_t	vf_pair_index;
+	/*
+	 * Function ID of the function that is being queried.
+	 * Only valid for a VF FID queried by the PF.
+	 */
+	uint16_t	fid;
 	uint8_t	unused_0[2];
-	/* VF Pair name (32 byte string). */
-	char	vf_pair_name[32];
+	/*
+	 * Maximum number of VLAN entries the firmware is allowed to DMA
+	 * to vlan_tag_mask_tbl.
+	 */
+	uint32_t	max_vlan_entries;
+	/*
+	 * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN
+	 * antispoof table to which firmware will DMA to. Each table
+	 * entry will contain the 16-bit TPID (0x8100 or 0x88a8 only),
+	 * 16-bit VLAN ID, and a 16-bit mask, all in network order to
+	 * match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry,
+	 * the mask value should be 0xfff for the 12-bit VLAN ID.
+	 */
+	uint64_t	vlan_tag_mask_tbl_addr;
 } __attribute__((packed));
 
-/* hwrm_cfa_vf_pair_info_output (size:512b/64B) */
-struct hwrm_cfa_vf_pair_info_output {
+/* hwrm_cfa_vlan_antispoof_qcfg_output (size:128b/16B) */
+struct hwrm_cfa_vlan_antispoof_qcfg_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -24709,28 +18521,9 @@ struct hwrm_cfa_vf_pair_info_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* vf pair table index. */
-	uint16_t	next_vf_pair_index;
-	/* vf pair member a's vf_fid. */
-	uint16_t	vf_a_fid;
-	/* vf pair member a's Linux logical VF number. */
-	uint16_t	vf_a_index;
-	/* vf pair member b's vf_fid. */
-	uint16_t	vf_b_fid;
-	/* vf pair member a's Linux logical VF number. */
-	uint16_t	vf_b_index;
-	/* vf pair state. */
-	uint8_t	pair_state;
-	/* Pair has been allocated */
-	#define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1)
-	/* Both pair members are active */
-	#define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE    UINT32_C(0x2)
-	#define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \
-		HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE
-	uint8_t	unused_0[5];
-	/* VF Pair name (32 byte string). */
-	char	pair_name[32];
-	uint8_t	unused_1[7];
+	/* Number of valid entries DMAd by firmware to vlan_tag_mask_tbl. */
+	uint32_t	num_vlan_entries;
+	uint8_t	unused_0[3];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -24741,13 +18534,13 @@ struct hwrm_cfa_vf_pair_info_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/***********************
- * hwrm_cfa_pair_alloc *
- ***********************/
+/********************************
+ * hwrm_cfa_ntuple_filter_alloc *
+ ********************************/
 
 
-/* hwrm_cfa_pair_alloc_input (size:576b/72B) */
-struct hwrm_cfa_pair_alloc_input {
+/* hwrm_cfa_ntuple_filter_alloc_input (size:1024b/128B) */
+struct hwrm_cfa_ntuple_filter_alloc_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -24775,346 +18568,316 @@ struct hwrm_cfa_pair_alloc_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	/* Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair, 5-rep2fn_mod). */
-	uint8_t	pair_mode;
-	/* Pair between VF on local host with PF or VF on specified host. */
-	#define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_VF2FN         UINT32_C(0x0)
-	/* Pair between REP on local host with PF or VF on specified host. */
-	#define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN        UINT32_C(0x1)
-	/* Pair between REP on local host with REP on specified host. */
-	#define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2REP       UINT32_C(0x2)
-	/* Pair for the proxy interface. */
-	#define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_PROXY         UINT32_C(0x3)
-	/* Pair for the PF interface. */
-	#define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_PFPAIR        UINT32_C(0x4)
-	/* Modify exiting rep2fn pair and move pair to new PF. */
-	#define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MOD    UINT32_C(0x5)
-	/* Modify exiting rep2fn pairs paired with same PF and move pairs to new PF. */
-	#define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MODALL UINT32_C(0x6)
-	#define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_LAST \
-		HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MODALL
-	uint8_t	unused_0;
-	/* Logical VF number (range: 0 -> MAX_VFS -1). */
-	uint16_t	vf_a_id;
-	/* Logical Host (0xff-local host). */
-	uint8_t	host_b_id;
-	/* Logical PF (0xff-PF for command channel). */
-	uint8_t	pf_b_id;
-	/* Logical VF number (range: 0 -> MAX_VFS -1). */
-	uint16_t	vf_b_id;
-	/* Loopback port (0xff-internal loopback), valid for mode-3. */
-	uint8_t	port_id;
-	/* Priority used for encap of loopback packets valid for mode-3. */
-	uint8_t	pri;
-	/* New PF for rep2fn modify, valid for mode 5. */
-	uint16_t	new_pf_fid;
+	uint32_t	flags;
+	/* Setting of this flag indicates the applicability to the loopback path. */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
+		UINT32_C(0x1)
+	/*
+	 * Setting of this flag indicates drop action. If this flag is not set,
+	 * then it should be considered accept action.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP \
+		UINT32_C(0x2)
+	/*
+	 * Setting of this flag indicates that a meter is expected to be attached
+	 * to this flow. This hint can be used when choosing the action record
+	 * format required for the flow.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER \
+		UINT32_C(0x4)
 	uint32_t	enables;
 	/*
-	 * This bit must be '1' for the q_ab field to be
+	 * This bit must be '1' for the l2_filter_id field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
+		UINT32_C(0x1)
+	/*
+	 * This bit must be '1' for the ethertype field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \
+		UINT32_C(0x2)
+	/*
+	 * This bit must be '1' for the tunnel_type field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+		UINT32_C(0x4)
+	/*
+	 * This bit must be '1' for the src_macaddr field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_Q_AB_VALID      UINT32_C(0x1)
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \
+		UINT32_C(0x8)
 	/*
-	 * This bit must be '1' for the q_ba field to be
+	 * This bit must be '1' for the ipaddr_type field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_Q_BA_VALID      UINT32_C(0x2)
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
+		UINT32_C(0x10)
 	/*
-	 * This bit must be '1' for the fc_ab field to be
+	 * This bit must be '1' for the src_ipaddr field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_FC_AB_VALID     UINT32_C(0x4)
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \
+		UINT32_C(0x20)
 	/*
-	 * This bit must be '1' for the fc_ba field to be
+	 * This bit must be '1' for the src_ipaddr_mask field to be
 	 * configured.
 	 */
-	#define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_FC_BA_VALID     UINT32_C(0x8)
-	/* VF Pair name (32 byte string). */
-	char	pair_name[32];
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR_MASK \
+		UINT32_C(0x40)
 	/*
-	 * The q_ab value specifies the logical index of the TX/RX CoS
-	 * queue to be assigned for traffic in the A to B direction of
-	 * the interface pair. The default value is 0.
+	 * This bit must be '1' for the dst_ipaddr field to be
+	 * configured.
 	 */
-	uint8_t	q_ab;
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \
+		UINT32_C(0x80)
 	/*
-	 * The q_ba value specifies the logical index of the TX/RX CoS
-	 * queue to be assigned for traffic in the B to A direction of
-	 * the interface pair. The default value is 1.
+	 * This bit must be '1' for the dst_ipaddr_mask field to be
+	 * configured.
 	 */
-	uint8_t	q_ba;
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR_MASK \
+		UINT32_C(0x100)
 	/*
-	 * Specifies whether RX ring flow control is disabled (0) or enabled
-	 * (1) in the A to B direction. The default value is 0, meaning that
-	 * packets will be dropped when the B-side RX rings are full.
+	 * This bit must be '1' for the ip_protocol field to be
+	 * configured.
 	 */
-	uint8_t	fc_ab;
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
+		UINT32_C(0x200)
 	/*
-	 * Specifies whether RX ring flow control is disabled (0) or enabled
-	 * (1) in the B to A direction. The default value is 1, meaning that
-	 * the RX CoS queue will be flow controlled when the A-side RX rings
-	 * are full.
+	 * This bit must be '1' for the src_port field to be
+	 * configured.
 	 */
-	uint8_t	fc_ba;
-	uint8_t	unused_1[4];
-} __attribute__((packed));
-
-/* hwrm_cfa_pair_alloc_output (size:192b/24B) */
-struct hwrm_cfa_pair_alloc_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* Only valid for modes 1 and 2. */
-	uint16_t	rx_cfa_code_a;
-	/* Only valid for modes 1 and 2. */
-	uint16_t	tx_cfa_action_a;
-	/* Only valid for mode 2. */
-	uint16_t	rx_cfa_code_b;
-	/* Only valid for mode 2. */
-	uint16_t	tx_cfa_action_b;
-	uint8_t	unused_0[7];
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \
+		UINT32_C(0x400)
 	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
+	 * This bit must be '1' for the src_port_mask field to be
+	 * configured.
 	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**********************
- * hwrm_cfa_pair_free *
- **********************/
-
-
-/* hwrm_cfa_pair_free_input (size:384b/48B) */
-struct hwrm_cfa_pair_free_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT_MASK \
+		UINT32_C(0x800)
 	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
+	 * This bit must be '1' for the dst_port field to be
+	 * configured.
 	 */
-	uint16_t	cmpl_ring;
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \
+		UINT32_C(0x1000)
+	/*
+	 * This bit must be '1' for the dst_port_mask field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT_MASK \
+		UINT32_C(0x2000)
+	/*
+	 * This bit must be '1' for the pri_hint field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_PRI_HINT \
+		UINT32_C(0x4000)
+	/*
+	 * This bit must be '1' for the ntuple_filter_id field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_NTUPLE_FILTER_ID \
+		UINT32_C(0x8000)
+	/*
+	 * This bit must be '1' for the dst_id field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
+		UINT32_C(0x10000)
+	/*
+	 * This bit must be '1' for the mirror_vnic_id field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+		UINT32_C(0x20000)
+	/*
+	 * This bit must be '1' for the dst_macaddr field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \
+		UINT32_C(0x40000)
+	/*
+	 * This value identifies a set of CFA data structures used for an L2
+	 * context.
+	 */
+	uint64_t	l2_filter_id;
+	/*
+	 * This value indicates the source MAC address in
+	 * the Ethernet header.
+	 */
+	uint8_t	src_macaddr[6];
+	/* This value indicates the ethertype in the Ethernet header. */
+	uint16_t	ethertype;
+	/*
+	 * This value indicates the type of IP address.
+	 * 4 - IPv4
+	 * 6 - IPv6
+	 * All others are invalid.
+	 */
+	uint8_t	ip_addr_type;
+	/* invalid */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \
+		UINT32_C(0x0)
+	/* IPv4 */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \
+		UINT32_C(0x4)
+	/* IPv6 */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \
+		UINT32_C(0x6)
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
+		HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
 	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 * The value of protocol filed in IP header.
+	 * Applies to UDP and TCP traffic.
+	 * 6 - TCP
+	 * 17 - UDP
 	 */
-	uint16_t	seq_id;
+	uint8_t	ip_protocol;
+	/* invalid */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \
+		UINT32_C(0x0)
+	/* TCP */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \
+		UINT32_C(0x6)
+	/* UDP */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \
+		UINT32_C(0x11)
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \
+		HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * If set, this value shall represent the
+	 * Logical VNIC ID of the destination VNIC for the RX
+	 * path and network port id of the destination port for
+	 * the TX path.
 	 */
-	uint16_t	target_id;
+	uint16_t	dst_id;
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * Logical VNIC ID of the VNIC where traffic is
+	 * mirrored.
 	 */
-	uint64_t	resp_addr;
-	/* VF Pair name (32 byte string). */
-	char	pair_name[32];
-} __attribute__((packed));
-
-/* hwrm_cfa_pair_free_output (size:128b/16B) */
-struct hwrm_cfa_pair_free_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_0[7];
+	uint16_t	mirror_vnic_id;
 	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
+	 * This value indicates the tunnel type for this filter.
+	 * If this field is not specified, then the filter shall
+	 * apply to both non-tunneled and tunneled packets.
+	 * If this field conflicts with the tunnel_type specified
+	 * in the l2_filter_id, then the HWRM shall return an
+	 * error for this command.
 	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**********************
- * hwrm_cfa_pair_info *
- **********************/
-
-
-/* hwrm_cfa_pair_info_input (size:448b/56B) */
-struct hwrm_cfa_pair_info_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
+	uint8_t	tunnel_type;
+	/* Non-tunnel */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+		UINT32_C(0x0)
+	/* Virtual eXtensible Local Area Network (VXLAN) */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+		UINT32_C(0x1)
+	/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+		UINT32_C(0x2)
+	/* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+		UINT32_C(0x3)
+	/* IP in IP */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+		UINT32_C(0x4)
+	/* Generic Network Virtualization Encapsulation (Geneve) */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+		UINT32_C(0x5)
+	/* Multi-Protocol Lable Switching (MPLS) */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+		UINT32_C(0x6)
+	/* Stateless Transport Tunnel (STT) */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \
+		UINT32_C(0x7)
+	/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+		UINT32_C(0x8)
+	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+		UINT32_C(0x9)
+	/* Any tunneled traffic */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+		UINT32_C(0xff)
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+		HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
 	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
+	 * This hint is provided to help in placing
+	 * the filter in the filter table.
 	 */
-	uint16_t	cmpl_ring;
+	uint8_t	pri_hint;
+	/* No preference */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
+		UINT32_C(0x0)
+	/* Above the given filter */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE \
+		UINT32_C(0x1)
+	/* Below the given filter */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_BELOW \
+		UINT32_C(0x2)
+	/* As high as possible */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_HIGHEST \
+		UINT32_C(0x3)
+	/* As low as possible */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST \
+		UINT32_C(0x4)
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LAST \
+		HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST
 	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 * The value of source IP address to be used in filtering.
+	 * For IPv4, first four bytes represent the IP address.
 	 */
-	uint16_t	seq_id;
+	uint32_t	src_ipaddr[4];
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * The value of source IP address mask to be used in
+	 * filtering.
+	 * For IPv4, first four bytes represent the IP address mask.
 	 */
-	uint16_t	target_id;
+	uint32_t	src_ipaddr_mask[4];
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * The value of destination IP address to be used in filtering.
+	 * For IPv4, first four bytes represent the IP address.
 	 */
-	uint64_t	resp_addr;
-	uint32_t	flags;
-	/* If this flag is set, lookup by name else lookup by index. */
-	#define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE      UINT32_C(0x1)
-	/* If this flag is set, lookup by PF id and VF id. */
-	#define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE     UINT32_C(0x2)
-	/* Pair table index. */
-	uint16_t	pair_index;
-	/* Pair pf index. */
-	uint8_t	pair_pfid;
-	/* Pair vf index. */
-	uint8_t	pair_vfid;
-	/* Pair name (32 byte string). */
-	char	pair_name[32];
-} __attribute__((packed));
-
-/* hwrm_cfa_pair_info_output (size:576b/72B) */
-struct hwrm_cfa_pair_info_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* Pair table index. */
-	uint16_t	next_pair_index;
-	/* Pair member a's fid. */
-	uint16_t	a_fid;
-	/* Logical host number. */
-	uint8_t	host_a_index;
-	/* Logical PF number. */
-	uint8_t	pf_a_index;
-	/* Pair member a's Linux logical VF number. */
-	uint16_t	vf_a_index;
-	/* Rx CFA code. */
-	uint16_t	rx_cfa_code_a;
-	/* Tx CFA action. */
-	uint16_t	tx_cfa_action_a;
-	/* Pair member b's fid. */
-	uint16_t	b_fid;
-	/* Logical host number. */
-	uint8_t	host_b_index;
-	/* Logical PF number. */
-	uint8_t	pf_b_index;
-	/* Pair member a's Linux logical VF number. */
-	uint16_t	vf_b_index;
-	/* Rx CFA code. */
-	uint16_t	rx_cfa_code_b;
-	/* Tx CFA action. */
-	uint16_t	tx_cfa_action_b;
-	/* Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair). */
-	uint8_t	pair_mode;
-	/* Pair between VF on local host with PF or VF on specified host. */
-	#define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_VF2FN   UINT32_C(0x0)
-	/* Pair between REP on local host with PF or VF on specified host. */
-	#define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2FN  UINT32_C(0x1)
-	/* Pair between REP on local host with REP on specified host. */
-	#define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2REP UINT32_C(0x2)
-	/* Pair for the proxy interface. */
-	#define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PROXY   UINT32_C(0x3)
-	/* Pair for the PF interface. */
-	#define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR  UINT32_C(0x4)
-	#define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_LAST \
-		HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR
-	/* Pair state. */
-	uint8_t	pair_state;
-	/* Pair has been allocated */
-	#define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1)
-	/* Both pair members are active */
-	#define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE    UINT32_C(0x2)
-	#define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \
-		HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE
-	/* Pair name (32 byte string). */
-	char	pair_name[32];
-	uint8_t	unused_0[7];
+	uint32_t	dst_ipaddr[4];
 	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
+	 * The value of destination IP address mask to be used in
+	 * filtering.
+	 * For IPv4, first four bytes represent the IP address mask.
 	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**********************
- * hwrm_cfa_vfr_alloc *
- **********************/
-
-
-/* hwrm_cfa_vfr_alloc_input (size:448b/56B) */
-struct hwrm_cfa_vfr_alloc_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
+	uint32_t	dst_ipaddr_mask[4];
 	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
+	 * The value of source port to be used in filtering.
+	 * Applies to UDP and TCP traffic.
 	 */
-	uint16_t	cmpl_ring;
+	uint16_t	src_port;
 	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 * The value of source port mask to be used in filtering.
+	 * Applies to UDP and TCP traffic.
 	 */
-	uint16_t	seq_id;
+	uint16_t	src_port_mask;
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * The value of destination port to be used in filtering.
+	 * Applies to UDP and TCP traffic.
 	 */
-	uint16_t	target_id;
+	uint16_t	dst_port;
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * The value of destination port mask to be used in
+	 * filtering.
+	 * Applies to UDP and TCP traffic.
 	 */
-	uint64_t	resp_addr;
-	/* Logical VF number (range: 0 -> MAX_VFS -1). */
-	uint16_t	vf_id;
+	uint16_t	dst_port_mask;
 	/*
-	 * This field is reserved for the future use.
-	 * It shall be set to 0.
+	 * This is the ID of the filter that goes along with
+	 * the pri_hint.
 	 */
-	uint16_t	reserved;
-	uint8_t	unused_0[4];
-	/* VF Representor name (32 byte string). */
-	char	vfr_name[32];
+	uint64_t	ntuple_filter_id_hint;
 } __attribute__((packed));
 
-/* hwrm_cfa_vfr_alloc_output (size:128b/16B) */
-struct hwrm_cfa_vfr_alloc_output {
+/* hwrm_cfa_ntuple_filter_alloc_output (size:192b/24B) */
+struct hwrm_cfa_ntuple_filter_alloc_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -25123,10 +18886,16 @@ struct hwrm_cfa_vfr_alloc_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* Rx CFA code. */
-	uint16_t	rx_cfa_code;
-	/* Tx CFA action. */
-	uint16_t	tx_cfa_action;
+	/* This value is an opaque id into CFA data structures. */
+	uint64_t	ntuple_filter_id;
+	/*
+	 * This is the ID of the flow associated with this
+	 * filter.
+	 * This value shall be used to match and associate the
+	 * flow identifier returned in completion records.
+	 * A value of 0xFFFFFFFF shall indicate no flow id.
+	 */
+	uint32_t	flow_id;
 	uint8_t	unused_0[3];
 	/*
 	 * This field is used in Output records to indicate that the output
@@ -25138,13 +18907,31 @@ struct hwrm_cfa_vfr_alloc_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/*********************
- * hwrm_cfa_vfr_free *
- *********************/
+/* hwrm_cfa_ntuple_filter_alloc_cmd_err (size:64b/8B) */
+struct hwrm_cfa_ntuple_filter_alloc_cmd_err {
+	/*
+	 * command specific error codes that goes to
+	 * the cmd_err field in Common HWRM Error Response.
+	 */
+	uint8_t	code;
+	/* Unknown error */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_UNKNOWN \
+		UINT32_C(0x0)
+	/* Unable to complete operation due to conflict with Rx Mask VLAN */
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR \
+		UINT32_C(0x1)
+	#define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_LAST \
+		HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR
+	uint8_t	unused_0[7];
+} __attribute__((packed));
+
+/*******************************
+ * hwrm_cfa_ntuple_filter_free *
+ *******************************/
 
 
-/* hwrm_cfa_vfr_free_input (size:384b/48B) */
-struct hwrm_cfa_vfr_free_input {
+/* hwrm_cfa_ntuple_filter_free_input (size:192b/24B) */
+struct hwrm_cfa_ntuple_filter_free_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -25172,12 +18959,12 @@ struct hwrm_cfa_vfr_free_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	/* VF Representor name (32 byte string). */
-	char	vfr_name[32];
+	/* This value is an opaque id into CFA data structures. */
+	uint64_t	ntuple_filter_id;
 } __attribute__((packed));
 
-/* hwrm_cfa_vfr_free_output (size:128b/16B) */
-struct hwrm_cfa_vfr_free_output {
+/* hwrm_cfa_ntuple_filter_free_output (size:128b/16B) */
+struct hwrm_cfa_ntuple_filter_free_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -25198,12 +18985,12 @@ struct hwrm_cfa_vfr_free_output {
 } __attribute__((packed));
 
 /******************************
- * hwrm_tunnel_dst_port_query *
+ * hwrm_cfa_ntuple_filter_cfg *
  ******************************/
 
 
-/* hwrm_tunnel_dst_port_query_input (size:192b/24B) */
-struct hwrm_tunnel_dst_port_query_input {
+/* hwrm_cfa_ntuple_filter_cfg_input (size:384b/48B) */
+struct hwrm_cfa_ntuple_filter_cfg_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -25231,27 +19018,59 @@ struct hwrm_tunnel_dst_port_query_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	/* Tunnel Type. */
-	uint8_t	tunnel_type;
-	/* Virtual eXtensible Local Area Network (VXLAN) */
-	#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN \
+	uint32_t	enables;
+	/*
+	 * This bit must be '1' for the new_dst_id field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_DST_ID \
 		UINT32_C(0x1)
-	/* Generic Network Virtualization Encapsulation (Geneve) */
-	#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_GENEVE \
-		UINT32_C(0x5)
-	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
-	#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_V4 \
-		UINT32_C(0x9)
-	/* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
-	#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_IPGRE_V1 \
-		UINT32_C(0xa)
-	#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_LAST \
-		HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_IPGRE_V1
-	uint8_t	unused_0[7];
+	/*
+	 * This bit must be '1' for the new_mirror_vnic_id field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
+		UINT32_C(0x2)
+	/*
+	 * This bit must be '1' for the new_meter_instance_id field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \
+		UINT32_C(0x4)
+	uint8_t	unused_0[4];
+	/* This value is an opaque id into CFA data structures. */
+	uint64_t	ntuple_filter_id;
+	/*
+	 * If set, this value shall represent the new
+	 * Logical VNIC ID of the destination VNIC for the RX
+	 * path and new network port id of the destination port for
+	 * the TX path.
+	 */
+	uint32_t	new_dst_id;
+	/*
+	 * New Logical VNIC ID of the VNIC where traffic is
+	 * mirrored.
+	 */
+	uint32_t	new_mirror_vnic_id;
+	/*
+	 * New meter to attach to the flow. Specifying the
+	 * invalid instance ID is used to remove any existing
+	 * meter from the flow.
+	 */
+	uint16_t	new_meter_instance_id;
+	/*
+	 * A value of 0xfff is considered invalid and implies the
+	 * instance is not configured.
+	 */
+	#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \
+		UINT32_C(0xffff)
+	#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_LAST \
+		HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID
+	uint8_t	unused_1[6];
 } __attribute__((packed));
 
-/* hwrm_tunnel_dst_port_query_output (size:128b/16B) */
-struct hwrm_tunnel_dst_port_query_output {
+/* hwrm_cfa_ntuple_filter_cfg_output (size:128b/16B) */
+struct hwrm_cfa_ntuple_filter_cfg_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -25260,25 +19079,7 @@ struct hwrm_tunnel_dst_port_query_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/*
-	 * This field represents the identifier of L4 destination port
-	 * used for the given tunnel type. This field is valid for
-	 * specific tunnel types that use layer 4 (e.g. UDP)
-	 * transports for tunneling.
-	 */
-	uint16_t	tunnel_dst_port_id;
-	/*
-	 * This field represents the value of L4 destination port
-	 * identified by tunnel_dst_port_id. This field is valid for
-	 * specific tunnel types that use layer 4 (e.g. UDP)
-	 * transports for tunneling.
-	 * This field is in network byte order.
-	 *
-	 * A value of 0 means that the destination port is not
-	 * configured.
-	 */
-	uint16_t	tunnel_dst_port_val;
-	uint8_t	unused_0[3];
+	uint8_t	unused_0[7];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -25289,13 +19090,13 @@ struct hwrm_tunnel_dst_port_query_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/******************************
- * hwrm_tunnel_dst_port_alloc *
- ******************************/
+/**************************
+ * hwrm_cfa_em_flow_alloc *
+ **************************/
 
 
-/* hwrm_tunnel_dst_port_alloc_input (size:192b/24B) */
-struct hwrm_tunnel_dst_port_alloc_input {
+/* hwrm_cfa_em_flow_alloc_input (size:896b/112B) */
+struct hwrm_cfa_em_flow_alloc_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -25323,313 +19124,307 @@ struct hwrm_tunnel_dst_port_alloc_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	/* Tunnel Type. */
-	uint8_t	tunnel_type;
-	/* Virtual eXtensible Local Area Network (VXLAN) */
-	#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+	uint32_t	flags;
+	/*
+	 * Enumeration denoting the RX, TX type of the resource.
+	 * This enumeration is used for resources that are similar for both
+	 * TX and RX paths of the chip.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH         UINT32_C(0x1)
+	/* tx path */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_TX        UINT32_C(0x0)
+	/* rx path */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX        UINT32_C(0x1)
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_LAST \
+		HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX
+	/*
+	 * Setting of this flag indicates enabling of a byte counter for a given
+	 * flow.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_BYTE_CTR     UINT32_C(0x2)
+	/*
+	 * Setting of this flag indicates enabling of a packet counter for a given
+	 * flow.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PKT_CTR      UINT32_C(0x4)
+	/* Setting of this flag indicates de-capsulation action for the given flow. */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DECAP        UINT32_C(0x8)
+	/* Setting of this flag indicates encapsulation action for the given flow. */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_ENCAP        UINT32_C(0x10)
+	/*
+	 * Setting of this flag indicates drop action. If this flag is not set,
+	 * then it should be considered accept action.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DROP         UINT32_C(0x20)
+	/*
+	 * Setting of this flag indicates that a meter is expected to be attached
+	 * to this flow. This hint can be used when choosing the action record
+	 * format required for the flow.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_METER        UINT32_C(0x40)
+	uint32_t	enables;
+	/*
+	 * This bit must be '1' for the l2_filter_id field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
 		UINT32_C(0x1)
-	/* Generic Network Virtualization Encapsulation (Geneve) */
-	#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
-		UINT32_C(0x5)
-	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
-	#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
-		UINT32_C(0x9)
-	/* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
-	#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
-		UINT32_C(0xa)
-	#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_LAST \
-		HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1
-	uint8_t	unused_0;
 	/*
-	 * This field represents the value of L4 destination port used
-	 * for the given tunnel type. This field is valid for
-	 * specific tunnel types that use layer 4 (e.g. UDP)
-	 * transports for tunneling.
-	 *
-	 * This field is in network byte order.
-	 *
-	 * A value of 0 shall fail the command.
+	 * This bit must be '1' for the tunnel_type field to be
+	 * configured.
 	 */
-	uint16_t	tunnel_dst_port_val;
-	uint8_t	unused_1[4];
-} __attribute__((packed));
-
-/* hwrm_tunnel_dst_port_alloc_output (size:128b/16B) */
-struct hwrm_tunnel_dst_port_alloc_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+		UINT32_C(0x2)
+	/*
+	 * This bit must be '1' for the tunnel_id field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_ID \
+		UINT32_C(0x4)
+	/*
+	 * This bit must be '1' for the src_macaddr field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_MACADDR \
+		UINT32_C(0x8)
+	/*
+	 * This bit must be '1' for the dst_macaddr field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_MACADDR \
+		UINT32_C(0x10)
+	/*
+	 * This bit must be '1' for the ovlan_vid field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_OVLAN_VID \
+		UINT32_C(0x20)
+	/*
+	 * This bit must be '1' for the ivlan_vid field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IVLAN_VID \
+		UINT32_C(0x40)
+	/*
+	 * This bit must be '1' for the ethertype field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ETHERTYPE \
+		UINT32_C(0x80)
+	/*
+	 * This bit must be '1' for the src_ipaddr field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_IPADDR \
+		UINT32_C(0x100)
+	/*
+	 * This bit must be '1' for the dst_ipaddr field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_IPADDR \
+		UINT32_C(0x200)
+	/*
+	 * This bit must be '1' for the ipaddr_type field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
+		UINT32_C(0x400)
+	/*
+	 * This bit must be '1' for the ip_protocol field to be
+	 * configured.
+	 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
+		UINT32_C(0x800)
 	/*
-	 * Identifier of a tunnel L4 destination port value. Only applies to tunnel
-	 * types that has l4 destination port parameters.
+	 * This bit must be '1' for the src_port field to be
+	 * configured.
 	 */
-	uint16_t	tunnel_dst_port_id;
-	uint8_t	unused_0[5];
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_PORT \
+		UINT32_C(0x1000)
 	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
+	 * This bit must be '1' for the dst_port field to be
+	 * configured.
 	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/*****************************
- * hwrm_tunnel_dst_port_free *
- *****************************/
-
-
-/* hwrm_tunnel_dst_port_free_input (size:192b/24B) */
-struct hwrm_tunnel_dst_port_free_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_PORT \
+		UINT32_C(0x2000)
 	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
+	 * This bit must be '1' for the dst_id field to be
+	 * configured.
 	 */
-	uint16_t	cmpl_ring;
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_ID \
+		UINT32_C(0x4000)
 	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 * This bit must be '1' for the mirror_vnic_id field to be
+	 * configured.
 	 */
-	uint16_t	seq_id;
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+		UINT32_C(0x8000)
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * This bit must be '1' for the encap_record_id field to be
+	 * configured.
 	 */
-	uint16_t	target_id;
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ENCAP_RECORD_ID \
+		UINT32_C(0x10000)
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * This bit must be '1' for the meter_instance_id field to be
+	 * configured.
 	 */
-	uint64_t	resp_addr;
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_METER_INSTANCE_ID \
+		UINT32_C(0x20000)
+	/*
+	 * This value identifies a set of CFA data structures used for an L2
+	 * context.
+	 */
+	uint64_t	l2_filter_id;
 	/* Tunnel Type. */
 	uint8_t	tunnel_type;
+	/* Non-tunnel */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+		UINT32_C(0x0)
 	/* Virtual eXtensible Local Area Network (VXLAN) */
-	#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN \
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
 		UINT32_C(0x1)
+	/* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+		UINT32_C(0x2)
+	/* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
+		UINT32_C(0x3)
+	/* IP in IP */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
+		UINT32_C(0x4)
 	/* Generic Network Virtualization Encapsulation (Geneve) */
-	#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE \
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
 		UINT32_C(0x5)
+	/* Multi-Protocol Lable Switching (MPLS) */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
+		UINT32_C(0x6)
+	/* Stateless Transport Tunnel (STT) */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT \
+		UINT32_C(0x7)
+	/* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
+		UINT32_C(0x8)
 	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
-	#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
 		UINT32_C(0x9)
-	/* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
-	#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \
-		UINT32_C(0xa)
-	#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_LAST \
-		HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1
-	uint8_t	unused_0;
+	/* Any tunneled traffic */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+		UINT32_C(0xff)
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+		HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
+	uint8_t	unused_0[3];
 	/*
-	 * Identifier of a tunnel L4 destination port value. Only applies to tunnel
-	 * types that has l4 destination port parameters.
+	 * Tunnel identifier.
+	 * Virtual Network Identifier (VNI). Only valid with
+	 * tunnel_types VXLAN, NVGRE, and Geneve.
+	 * Only lower 24-bits of VNI field are used
+	 * in setting up the filter.
 	 */
-	uint16_t	tunnel_dst_port_id;
-	uint8_t	unused_1[4];
-} __attribute__((packed));
-
-/* hwrm_tunnel_dst_port_free_output (size:128b/16B) */
-struct hwrm_tunnel_dst_port_free_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	unused_1[7];
+	uint32_t	tunnel_id;
 	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
+	 * This value indicates the source MAC address in
+	 * the Ethernet header.
 	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/* ctx_hw_stats (size:1280b/160B) */
-struct ctx_hw_stats {
-	/* Number of received unicast packets */
-	uint64_t	rx_ucast_pkts;
-	/* Number of received multicast packets */
-	uint64_t	rx_mcast_pkts;
-	/* Number of received broadcast packets */
-	uint64_t	rx_bcast_pkts;
-	/* Number of discarded packets on received path */
-	uint64_t	rx_discard_pkts;
-	/* Number of dropped packets on received path */
-	uint64_t	rx_drop_pkts;
-	/* Number of received bytes for unicast traffic */
-	uint64_t	rx_ucast_bytes;
-	/* Number of received bytes for multicast traffic */
-	uint64_t	rx_mcast_bytes;
-	/* Number of received bytes for broadcast traffic */
-	uint64_t	rx_bcast_bytes;
-	/* Number of transmitted unicast packets */
-	uint64_t	tx_ucast_pkts;
-	/* Number of transmitted multicast packets */
-	uint64_t	tx_mcast_pkts;
-	/* Number of transmitted broadcast packets */
-	uint64_t	tx_bcast_pkts;
-	/* Number of discarded packets on transmit path */
-	uint64_t	tx_discard_pkts;
-	/* Number of dropped packets on transmit path */
-	uint64_t	tx_drop_pkts;
-	/* Number of transmitted bytes for unicast traffic */
-	uint64_t	tx_ucast_bytes;
-	/* Number of transmitted bytes for multicast traffic */
-	uint64_t	tx_mcast_bytes;
-	/* Number of transmitted bytes for broadcast traffic */
-	uint64_t	tx_bcast_bytes;
-	/* Number of TPA packets */
-	uint64_t	tpa_pkts;
-	/* Number of TPA bytes */
-	uint64_t	tpa_bytes;
-	/* Number of TPA events */
-	uint64_t	tpa_events;
-	/* Number of TPA aborts */
-	uint64_t	tpa_aborts;
-} __attribute__((packed));
-
-/***********************
- * hwrm_stat_ctx_alloc *
- ***********************/
-
-
-/* hwrm_stat_ctx_alloc_input (size:256b/32B) */
-struct hwrm_stat_ctx_alloc_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
+	uint8_t	src_macaddr[6];
+	/* The meter instance to attach to the flow. */
+	uint16_t	meter_instance_id;
 	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
+	 * A value of 0xfff is considered invalid and implies the
+	 * instance is not configured.
 	 */
-	uint16_t	cmpl_ring;
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID \
+		UINT32_C(0xffff)
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_LAST \
+		HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID
 	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 * This value indicates the destination MAC address in
+	 * the Ethernet header.
 	 */
-	uint16_t	seq_id;
+	uint8_t	dst_macaddr[6];
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * This value indicates the VLAN ID of the outer VLAN tag
+	 * in the Ethernet header.
 	 */
-	uint16_t	target_id;
+	uint16_t	ovlan_vid;
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * This value indicates the VLAN ID of the inner VLAN tag
+	 * in the Ethernet header.
 	 */
-	uint64_t	resp_addr;
-	/* This is the address for statistic block. */
-	uint64_t	stats_dma_addr;
+	uint16_t	ivlan_vid;
+	/* This value indicates the ethertype in the Ethernet header. */
+	uint16_t	ethertype;
 	/*
-	 * The statistic block update period in ms.
-	 * e.g. 250ms, 500ms, 750ms, 1000ms.
-	 * If update_period_ms is 0, then the stats update
-	 * shall be never done and the DMA address shall not be used.
-	 * In this case, the stat block can only be read by
-	 * hwrm_stat_ctx_query command.
+	 * This value indicates the type of IP address.
+	 * 4 - IPv4
+	 * 6 - IPv6
+	 * All others are invalid.
 	 */
-	uint32_t	update_period_ms;
+	uint8_t	ip_addr_type;
+	/* invalid */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN UINT32_C(0x0)
+	/* IPv4 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV4    UINT32_C(0x4)
+	/* IPv6 */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6    UINT32_C(0x6)
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_LAST \
+		HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6
 	/*
-	 * This field is used to specify statistics context specific
-	 * configuration flags.
+	 * The value of protocol filed in IP header.
+	 * Applies to UDP and TCP traffic.
+	 * 6 - TCP
+	 * 17 - UDP
 	 */
-	uint8_t	stat_ctx_flags;
+	uint8_t	ip_protocol;
+	/* invalid */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN UINT32_C(0x0)
+	/* TCP */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_TCP     UINT32_C(0x6)
+	/* UDP */
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP     UINT32_C(0x11)
+	#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_LAST \
+		HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP
+	uint8_t	unused_1[2];
 	/*
-	 * When this bit is set to '1', the statistics context shall be
-	 * allocated for RoCE traffic only. In this case, traffic other
-	 * than offloaded RoCE traffic shall not be included in this
-	 * statistic context.
-	 * When this bit is set to '0', the statistics context shall be
-	 * used for the network traffic other than offloaded RoCE traffic.
+	 * The value of source IP address to be used in filtering.
+	 * For IPv4, first four bytes represent the IP address.
 	 */
-	#define HWRM_STAT_CTX_ALLOC_INPUT_STAT_CTX_FLAGS_ROCE     UINT32_C(0x1)
-	uint8_t	unused_0[3];
-} __attribute__((packed));
-
-/* hwrm_stat_ctx_alloc_output (size:128b/16B) */
-struct hwrm_stat_ctx_alloc_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	/* This is the statistics context ID value. */
-	uint32_t	stat_ctx_id;
-	uint8_t	unused_0[3];
+	uint32_t	src_ipaddr[4];
 	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
+	 * big_endian = True
+	 *     The value of destination IP address to be used in filtering.
+	 *     For IPv4, first four bytes represent the IP address.
 	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/**********************
- * hwrm_stat_ctx_free *
- **********************/
-
-
-/* hwrm_stat_ctx_free_input (size:192b/24B) */
-struct hwrm_stat_ctx_free_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
+	uint32_t	dst_ipaddr[4];
 	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
+	 * The value of source port to be used in filtering.
+	 * Applies to UDP and TCP traffic.
 	 */
-	uint16_t	cmpl_ring;
+	uint16_t	src_port;
 	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
+	 * The value of destination port to be used in filtering.
+	 * Applies to UDP and TCP traffic.
 	 */
-	uint16_t	seq_id;
+	uint16_t	dst_port;
 	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
+	 * If set, this value shall represent the
+	 * Logical VNIC ID of the destination VNIC for the RX
+	 * path and network port id of the destination port for
+	 * the TX path.
 	 */
-	uint16_t	target_id;
+	uint16_t	dst_id;
 	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
+	 * Logical VNIC ID of the VNIC where traffic is
+	 * mirrored.
 	 */
-	uint64_t	resp_addr;
-	/* ID of the statistics context that is being queried. */
-	uint32_t	stat_ctx_id;
-	uint8_t	unused_0[4];
+	uint16_t	mirror_vnic_id;
+	/* Logical ID of the encapsulation record. */
+	uint32_t	encap_record_id;
+	uint8_t	unused_2[4];
 } __attribute__((packed));
 
-/* hwrm_stat_ctx_free_output (size:128b/16B) */
-struct hwrm_stat_ctx_free_output {
+/* hwrm_cfa_em_flow_alloc_output (size:192b/24B) */
+struct hwrm_cfa_em_flow_alloc_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -25638,8 +19433,16 @@ struct hwrm_stat_ctx_free_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* This is the statistics context ID value. */
-	uint32_t	stat_ctx_id;
+	/* This value is an opaque id into CFA data structures. */
+	uint64_t	em_filter_id;
+	/*
+	 * This is the ID of the flow associated with this
+	 * filter.
+	 * This value shall be used to match and associate the
+	 * flow identifier returned in completion records.
+	 * A value of 0xFFFFFFFF shall indicate no flow id.
+	 */
+	uint32_t	flow_id;
 	uint8_t	unused_0[3];
 	/*
 	 * This field is used in Output records to indicate that the output
@@ -25651,13 +19454,13 @@ struct hwrm_stat_ctx_free_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/***********************
- * hwrm_stat_ctx_query *
- ***********************/
+/*************************
+ * hwrm_cfa_em_flow_free *
+ *************************/
 
 
-/* hwrm_stat_ctx_query_input (size:192b/24B) */
-struct hwrm_stat_ctx_query_input {
+/* hwrm_cfa_em_flow_free_input (size:192b/24B) */
+struct hwrm_cfa_em_flow_free_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -25685,13 +19488,12 @@ struct hwrm_stat_ctx_query_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	/* ID of the statistics context that is being queried. */
-	uint32_t	stat_ctx_id;
-	uint8_t	unused_0[4];
+	/* This value is an opaque id into CFA data structures. */
+	uint64_t	em_filter_id;
 } __attribute__((packed));
 
-/* hwrm_stat_ctx_query_output (size:1408b/176B) */
-struct hwrm_stat_ctx_query_output {
+/* hwrm_cfa_em_flow_free_output (size:128b/16B) */
+struct hwrm_cfa_em_flow_free_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -25700,46 +19502,6 @@ struct hwrm_stat_ctx_query_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* Number of transmitted unicast packets */
-	uint64_t	tx_ucast_pkts;
-	/* Number of transmitted multicast packets */
-	uint64_t	tx_mcast_pkts;
-	/* Number of transmitted broadcast packets */
-	uint64_t	tx_bcast_pkts;
-	/* Number of transmitted packets with error */
-	uint64_t	tx_err_pkts;
-	/* Number of dropped packets on transmit path */
-	uint64_t	tx_drop_pkts;
-	/* Number of transmitted bytes for unicast traffic */
-	uint64_t	tx_ucast_bytes;
-	/* Number of transmitted bytes for multicast traffic */
-	uint64_t	tx_mcast_bytes;
-	/* Number of transmitted bytes for broadcast traffic */
-	uint64_t	tx_bcast_bytes;
-	/* Number of received unicast packets */
-	uint64_t	rx_ucast_pkts;
-	/* Number of received multicast packets */
-	uint64_t	rx_mcast_pkts;
-	/* Number of received broadcast packets */
-	uint64_t	rx_bcast_pkts;
-	/* Number of received packets with error */
-	uint64_t	rx_err_pkts;
-	/* Number of dropped packets on received path */
-	uint64_t	rx_drop_pkts;
-	/* Number of received bytes for unicast traffic */
-	uint64_t	rx_ucast_bytes;
-	/* Number of received bytes for multicast traffic */
-	uint64_t	rx_mcast_bytes;
-	/* Number of received bytes for broadcast traffic */
-	uint64_t	rx_bcast_bytes;
-	/* Number of aggregated unicast packets */
-	uint64_t	rx_agg_pkts;
-	/* Number of aggregated unicast bytes */
-	uint64_t	rx_agg_bytes;
-	/* Number of aggregation events */
-	uint64_t	rx_agg_events;
-	/* Number of aborted aggregations */
-	uint64_t	rx_agg_aborts;
 	uint8_t	unused_0[7];
 	/*
 	 * This field is used in Output records to indicate that the output
@@ -25751,13 +19513,8 @@ struct hwrm_stat_ctx_query_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/***************************
- * hwrm_stat_ctx_clr_stats *
- ***************************/
-
-
-/* hwrm_stat_ctx_clr_stats_input (size:192b/24B) */
-struct hwrm_stat_ctx_clr_stats_input {
+/* hwrm_tunnel_dst_port_query_input (size:192b/24B) */
+struct hwrm_tunnel_dst_port_query_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -25785,13 +19542,27 @@ struct hwrm_stat_ctx_clr_stats_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
-	/* ID of the statistics context that is being queried. */
-	uint32_t	stat_ctx_id;
-	uint8_t	unused_0[4];
+	/* Tunnel Type. */
+	uint8_t	tunnel_type;
+	/* Virtual eXtensible Local Area Network (VXLAN) */
+	#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN \
+		UINT32_C(0x1)
+	/* Generic Network Virtualization Encapsulation (Geneve) */
+	#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_GENEVE \
+		UINT32_C(0x5)
+	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+	#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+		UINT32_C(0x9)
+	/* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+	#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+		UINT32_C(0xa)
+	#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_LAST \
+		HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_IPGRE_V1
+	uint8_t	unused_0[7];
 } __attribute__((packed));
 
-/* hwrm_stat_ctx_clr_stats_output (size:128b/16B) */
-struct hwrm_stat_ctx_clr_stats_output {
+/* hwrm_tunnel_dst_port_query_output (size:128b/16B) */
+struct hwrm_tunnel_dst_port_query_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -25800,7 +19571,25 @@ struct hwrm_stat_ctx_clr_stats_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	uint8_t	unused_0[7];
+	/*
+	 * This field represents the identifier of L4 destination port
+	 * used for the given tunnel type. This field is valid for
+	 * specific tunnel types that use layer 4 (e.g. UDP)
+	 * transports for tunneling.
+	 */
+	uint16_t	tunnel_dst_port_id;
+	/*
+	 * This field represents the value of L4 destination port
+	 * identified by tunnel_dst_port_id. This field is valid for
+	 * specific tunnel types that use layer 4 (e.g. UDP)
+	 * transports for tunneling.
+	 * This field is in network byte order.
+	 *
+	 * A value of 0 means that the destination port is not
+	 * configured.
+	 */
+	uint16_t	tunnel_dst_port_val;
+	uint8_t	unused_0[3];
 	/*
 	 * This field is used in Output records to indicate that the output
 	 * is completely written to RAM.  This field should be read as '1'
@@ -25811,13 +19600,13 @@ struct hwrm_stat_ctx_clr_stats_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/********************
- * hwrm_pcie_qstats *
- ********************/
+/******************************
+ * hwrm_tunnel_dst_port_alloc *
+ ******************************/
 
 
-/* hwrm_pcie_qstats_input (size:256b/32B) */
-struct hwrm_pcie_qstats_input {
+/* hwrm_tunnel_dst_port_alloc_input (size:192b/24B) */
+struct hwrm_tunnel_dst_port_alloc_input {
 	/* The HWRM command request type. */
 	uint16_t	req_type;
 	/*
@@ -25845,22 +19634,39 @@ struct hwrm_pcie_qstats_input {
 	 * point to a physically contiguous block of memory.
 	 */
 	uint64_t	resp_addr;
+	/* Tunnel Type. */
+	uint8_t	tunnel_type;
+	/* Virtual eXtensible Local Area Network (VXLAN) */
+	#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+		UINT32_C(0x1)
+	/* Generic Network Virtualization Encapsulation (Geneve) */
+	#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+		UINT32_C(0x5)
+	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+	#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+		UINT32_C(0x9)
+	/* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+	#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+		UINT32_C(0xa)
+	#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+		HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1
+	uint8_t	unused_0;
 	/*
-	 * The size of PCIe statistics block in bytes.
-	 * Firmware will DMA the PCIe statistics to
-	 * the host with this field size in the response.
-	 */
-	uint16_t	pcie_stat_size;
-	uint8_t	unused_0[6];
-	/*
-	 * This is the host address where
-	 * PCIe statistics will be stored
+	 * This field represents the value of L4 destination port used
+	 * for the given tunnel type. This field is valid for
+	 * specific tunnel types that use layer 4 (e.g. UDP)
+	 * transports for tunneling.
+	 *
+	 * This field is in network byte order.
+	 *
+	 * A value of 0 shall fail the command.
 	 */
-	uint64_t	pcie_stat_host_addr;
+	uint16_t	tunnel_dst_port_val;
+	uint8_t	unused_1[4];
 } __attribute__((packed));
 
-/* hwrm_pcie_qstats_output (size:128b/16B) */
-struct hwrm_pcie_qstats_output {
+/* hwrm_tunnel_dst_port_alloc_output (size:128b/16B) */
+struct hwrm_tunnel_dst_port_alloc_output {
 	/* The specific error status for the command. */
 	uint16_t	error_code;
 	/* The HWRM command request type. */
@@ -25869,8 +19675,11 @@ struct hwrm_pcie_qstats_output {
 	uint16_t	seq_id;
 	/* The length of the response data in number of bytes. */
 	uint16_t	resp_len;
-	/* The size of PCIe statistics block in bytes. */
-	uint16_t	pcie_stat_size;
+	/*
+	 * Identifier of a tunnel L4 destination port value. Only applies to tunnel
+	 * types that has l4 destination port parameters.
+	 */
+	uint16_t	tunnel_dst_port_id;
 	uint8_t	unused_0[5];
 	/*
 	 * This field is used in Output records to indicate that the output
@@ -25882,411 +19691,436 @@ struct hwrm_pcie_qstats_output {
 	uint8_t	valid;
 } __attribute__((packed));
 
-/* Port Tx Statistics Formats */
-/* tx_port_stats (size:3264b/408B) */
-struct tx_port_stats {
-	/* Total Number of 64 Bytes frames transmitted */
-	uint64_t	tx_64b_frames;
-	/* Total Number of 65-127 Bytes frames transmitted */
-	uint64_t	tx_65b_127b_frames;
-	/* Total Number of 128-255 Bytes frames transmitted */
-	uint64_t	tx_128b_255b_frames;
-	/* Total Number of 256-511 Bytes frames transmitted */
-	uint64_t	tx_256b_511b_frames;
-	/* Total Number of 512-1023 Bytes frames transmitted */
-	uint64_t	tx_512b_1023b_frames;
-	/* Total Number of 1024-1518 Bytes frames transmitted */
-	uint64_t	tx_1024b_1518_frames;
-	/*
-	 * Total Number of each good VLAN (exludes FCS errors)
-	 * frame transmitted which is 1519 to 1522 bytes in length
-	 * inclusive (excluding framing bits but including FCS bytes).
-	 */
-	uint64_t	tx_good_vlan_frames;
-	/* Total Number of 1519-2047 Bytes frames transmitted */
-	uint64_t	tx_1519b_2047_frames;
-	/* Total Number of 2048-4095 Bytes frames transmitted */
-	uint64_t	tx_2048b_4095b_frames;
-	/* Total Number of 4096-9216 Bytes frames transmitted */
-	uint64_t	tx_4096b_9216b_frames;
-	/* Total Number of 9217-16383 Bytes frames transmitted */
-	uint64_t	tx_9217b_16383b_frames;
-	/* Total Number of good frames transmitted */
-	uint64_t	tx_good_frames;
-	/* Total Number of frames transmitted */
-	uint64_t	tx_total_frames;
-	/* Total number of unicast frames transmitted */
-	uint64_t	tx_ucast_frames;
-	/* Total number of multicast frames transmitted */
-	uint64_t	tx_mcast_frames;
-	/* Total number of broadcast frames transmitted */
-	uint64_t	tx_bcast_frames;
-	/* Total number of PAUSE control frames transmitted */
-	uint64_t	tx_pause_frames;
-	/*
-	 * Total number of PFC/per-priority PAUSE
-	 * control frames transmitted
-	 */
-	uint64_t	tx_pfc_frames;
-	/* Total number of jabber frames transmitted */
-	uint64_t	tx_jabber_frames;
-	/* Total number of frames transmitted with FCS error */
-	uint64_t	tx_fcs_err_frames;
-	/* Total number of control frames transmitted */
-	uint64_t	tx_control_frames;
-	/* Total number of over-sized frames transmitted */
-	uint64_t	tx_oversz_frames;
-	/* Total number of frames with single deferral */
-	uint64_t	tx_single_dfrl_frames;
-	/* Total number of frames with multiple deferrals */
-	uint64_t	tx_multi_dfrl_frames;
-	/* Total number of frames with single collision */
-	uint64_t	tx_single_coll_frames;
-	/* Total number of frames with multiple collisions */
-	uint64_t	tx_multi_coll_frames;
-	/* Total number of frames with late collisions */
-	uint64_t	tx_late_coll_frames;
-	/* Total number of frames with excessive collisions */
-	uint64_t	tx_excessive_coll_frames;
-	/* Total number of fragmented frames transmitted */
-	uint64_t	tx_frag_frames;
-	/* Total number of transmit errors */
-	uint64_t	tx_err;
-	/* Total number of single VLAN tagged frames transmitted */
-	uint64_t	tx_tagged_frames;
-	/* Total number of double VLAN tagged frames transmitted */
-	uint64_t	tx_dbl_tagged_frames;
-	/* Total number of runt frames transmitted */
-	uint64_t	tx_runt_frames;
-	/* Total number of TX FIFO under runs */
-	uint64_t	tx_fifo_underruns;
-	/*
-	 * Total number of PFC frames with PFC enabled bit for
-	 * Pri 0 transmitted
-	 */
-	uint64_t	tx_pfc_ena_frames_pri0;
-	/*
-	 * Total number of PFC frames with PFC enabled bit for
-	 * Pri 1 transmitted
-	 */
-	uint64_t	tx_pfc_ena_frames_pri1;
-	/*
-	 * Total number of PFC frames with PFC enabled bit for
-	 * Pri 2 transmitted
-	 */
-	uint64_t	tx_pfc_ena_frames_pri2;
-	/*
-	 * Total number of PFC frames with PFC enabled bit for
-	 * Pri 3 transmitted
-	 */
-	uint64_t	tx_pfc_ena_frames_pri3;
-	/*
-	 * Total number of PFC frames with PFC enabled bit for
-	 * Pri 4 transmitted
-	 */
-	uint64_t	tx_pfc_ena_frames_pri4;
-	/*
-	 * Total number of PFC frames with PFC enabled bit for
-	 * Pri 5 transmitted
-	 */
-	uint64_t	tx_pfc_ena_frames_pri5;
-	/*
-	 * Total number of PFC frames with PFC enabled bit for
-	 * Pri 6 transmitted
-	 */
-	uint64_t	tx_pfc_ena_frames_pri6;
-	/*
-	 * Total number of PFC frames with PFC enabled bit for
-	 * Pri 7 transmitted
-	 */
-	uint64_t	tx_pfc_ena_frames_pri7;
-	/* Total number of EEE LPI Events on TX */
-	uint64_t	tx_eee_lpi_events;
-	/* EEE LPI Duration Counter on TX */
-	uint64_t	tx_eee_lpi_duration;
-	/*
-	 * Total number of Link Level Flow Control (LLFC) messages
-	 * transmitted
-	 */
-	uint64_t	tx_llfc_logical_msgs;
-	/* Total number of HCFC messages transmitted */
-	uint64_t	tx_hcfc_msgs;
-	/* Total number of TX collisions */
-	uint64_t	tx_total_collisions;
-	/* Total number of transmitted bytes */
-	uint64_t	tx_bytes;
-	/* Total number of end-to-end HOL frames */
-	uint64_t	tx_xthol_frames;
-	/* Total Tx Drops per Port reported by STATS block */
-	uint64_t	tx_stat_discard;
-	/* Total Tx Error Drops per Port reported by STATS block */
-	uint64_t	tx_stat_error;
-} __attribute__((packed));
+/*****************************
+ * hwrm_tunnel_dst_port_free *
+ *****************************/
 
-/* Port Rx Statistics Formats */
-/* rx_port_stats (size:4224b/528B) */
-struct rx_port_stats {
-	/* Total Number of 64 Bytes frames received */
-	uint64_t	rx_64b_frames;
-	/* Total Number of 65-127 Bytes frames received */
-	uint64_t	rx_65b_127b_frames;
-	/* Total Number of 128-255 Bytes frames received */
-	uint64_t	rx_128b_255b_frames;
-	/* Total Number of 256-511 Bytes frames received */
-	uint64_t	rx_256b_511b_frames;
-	/* Total Number of 512-1023 Bytes frames received */
-	uint64_t	rx_512b_1023b_frames;
-	/* Total Number of 1024-1518 Bytes frames received */
-	uint64_t	rx_1024b_1518_frames;
+
+/* hwrm_tunnel_dst_port_free_input (size:192b/24B) */
+struct hwrm_tunnel_dst_port_free_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
 	/*
-	 * Total Number of each good VLAN (exludes FCS errors)
-	 * frame received which is 1519 to 1522 bytes in length
-	 * inclusive (excluding framing bits but including FCS bytes).
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
 	 */
-	uint64_t	rx_good_vlan_frames;
-	/* Total Number of 1519-2047 Bytes frames received */
-	uint64_t	rx_1519b_2047b_frames;
-	/* Total Number of 2048-4095 Bytes frames received */
-	uint64_t	rx_2048b_4095b_frames;
-	/* Total Number of 4096-9216 Bytes frames received */
-	uint64_t	rx_4096b_9216b_frames;
-	/* Total Number of 9217-16383 Bytes frames received */
-	uint64_t	rx_9217b_16383b_frames;
-	/* Total number of frames received */
-	uint64_t	rx_total_frames;
-	/* Total number of unicast frames received */
-	uint64_t	rx_ucast_frames;
-	/* Total number of multicast frames received */
-	uint64_t	rx_mcast_frames;
-	/* Total number of broadcast frames received */
-	uint64_t	rx_bcast_frames;
-	/* Total number of received frames with FCS error */
-	uint64_t	rx_fcs_err_frames;
-	/* Total number of control frames received */
-	uint64_t	rx_ctrl_frames;
-	/* Total number of PAUSE frames received */
-	uint64_t	rx_pause_frames;
-	/* Total number of PFC frames received */
-	uint64_t	rx_pfc_frames;
+	uint16_t	cmpl_ring;
 	/*
-	 * Total number of frames received with an unsupported
-	 * opcode
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	uint64_t	rx_unsupported_opcode_frames;
+	uint16_t	seq_id;
 	/*
-	 * Total number of frames received with an unsupported
-	 * DA for pause and PFC
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
 	 */
-	uint64_t	rx_unsupported_da_pausepfc_frames;
-	/* Total number of frames received with an unsupported SA */
-	uint64_t	rx_wrong_sa_frames;
-	/* Total number of received packets with alignment error */
-	uint64_t	rx_align_err_frames;
-	/* Total number of received frames with out-of-range length */
-	uint64_t	rx_oor_len_frames;
-	/* Total number of received frames with error termination */
-	uint64_t	rx_code_err_frames;
+	uint16_t	target_id;
 	/*
-	 * Total number of received frames with a false carrier is
-	 * detected during idle, as defined by RX_ER samples active
-	 * and RXD is 0xE. The event is reported along with the
-	 * statistics generated on the next received frame. Only
-	 * one false carrier condition can be detected and logged
-	 * between frames.
-	 *
-	 * Carrier event, valid for 10M/100M speed modes only.
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	uint64_t	rx_false_carrier_frames;
-	/* Total number of over-sized frames received */
-	uint64_t	rx_ovrsz_frames;
-	/* Total number of jabber packets received */
-	uint64_t	rx_jbr_frames;
-	/* Total number of received frames with MTU error */
-	uint64_t	rx_mtu_err_frames;
-	/* Total number of received frames with CRC match */
-	uint64_t	rx_match_crc_frames;
-	/* Total number of frames received promiscuously */
-	uint64_t	rx_promiscuous_frames;
+	uint64_t	resp_addr;
+	/* Tunnel Type. */
+	uint8_t	tunnel_type;
+	/* Virtual eXtensible Local Area Network (VXLAN) */
+	#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN \
+		UINT32_C(0x1)
+	/* Generic Network Virtualization Encapsulation (Geneve) */
+	#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE \
+		UINT32_C(0x5)
+	/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+	#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+		UINT32_C(0x9)
+	/* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+	#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+		UINT32_C(0xa)
+	#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_LAST \
+		HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1
+	uint8_t	unused_0;
 	/*
-	 * Total number of received frames with one or two VLAN
-	 * tags
+	 * Identifier of a tunnel L4 destination port value. Only applies to tunnel
+	 * types that has l4 destination port parameters.
 	 */
-	uint64_t	rx_tagged_frames;
-	/* Total number of received frames with two VLAN tags */
-	uint64_t	rx_double_tagged_frames;
-	/* Total number of truncated frames received */
-	uint64_t	rx_trunc_frames;
-	/* Total number of good frames (without errors) received */
-	uint64_t	rx_good_frames;
+	uint16_t	tunnel_dst_port_id;
+	uint8_t	unused_1[4];
+} __attribute__((packed));
+
+/* hwrm_tunnel_dst_port_free_output (size:128b/16B) */
+struct hwrm_tunnel_dst_port_free_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	uint8_t	unused_1[7];
 	/*
-	 * Total number of received PFC frames with transition from
-	 * XON to XOFF on Pri 0
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
 	 */
-	uint64_t	rx_pfc_xon2xoff_frames_pri0;
+	uint8_t	valid;
+} __attribute__((packed));
+
+/* Periodic statistics context DMA to host. */
+/* ctx_hw_stats (size:1280b/160B) */
+struct ctx_hw_stats {
+	/* Number of received unicast packets */
+	uint64_t	rx_ucast_pkts;
+	/* Number of received multicast packets */
+	uint64_t	rx_mcast_pkts;
+	/* Number of received broadcast packets */
+	uint64_t	rx_bcast_pkts;
+	/* Number of discarded packets on received path */
+	uint64_t	rx_discard_pkts;
+	/* Number of dropped packets on received path */
+	uint64_t	rx_drop_pkts;
+	/* Number of received bytes for unicast traffic */
+	uint64_t	rx_ucast_bytes;
+	/* Number of received bytes for multicast traffic */
+	uint64_t	rx_mcast_bytes;
+	/* Number of received bytes for broadcast traffic */
+	uint64_t	rx_bcast_bytes;
+	/* Number of transmitted unicast packets */
+	uint64_t	tx_ucast_pkts;
+	/* Number of transmitted multicast packets */
+	uint64_t	tx_mcast_pkts;
+	/* Number of transmitted broadcast packets */
+	uint64_t	tx_bcast_pkts;
+	/* Number of discarded packets on transmit path */
+	uint64_t	tx_discard_pkts;
+	/* Number of dropped packets on transmit path */
+	uint64_t	tx_drop_pkts;
+	/* Number of transmitted bytes for unicast traffic */
+	uint64_t	tx_ucast_bytes;
+	/* Number of transmitted bytes for multicast traffic */
+	uint64_t	tx_mcast_bytes;
+	/* Number of transmitted bytes for broadcast traffic */
+	uint64_t	tx_bcast_bytes;
+	/* Number of TPA packets */
+	uint64_t	tpa_pkts;
+	/* Number of TPA bytes */
+	uint64_t	tpa_bytes;
+	/* Number of TPA events */
+	uint64_t	tpa_events;
+	/* Number of TPA aborts */
+	uint64_t	tpa_aborts;
+} __attribute__((packed));
+
+/***********************
+ * hwrm_stat_ctx_alloc *
+ ***********************/
+
+
+/* hwrm_stat_ctx_alloc_input (size:256b/32B) */
+struct hwrm_stat_ctx_alloc_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
 	/*
-	 * Total number of received PFC frames with transition from
-	 * XON to XOFF on Pri 1
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
 	 */
-	uint64_t	rx_pfc_xon2xoff_frames_pri1;
+	uint16_t	cmpl_ring;
 	/*
-	 * Total number of received PFC frames with transition from
-	 * XON to XOFF on Pri 2
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	uint64_t	rx_pfc_xon2xoff_frames_pri2;
+	uint16_t	seq_id;
 	/*
-	 * Total number of received PFC frames with transition from
-	 * XON to XOFF on Pri 3
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
 	 */
-	uint64_t	rx_pfc_xon2xoff_frames_pri3;
+	uint16_t	target_id;
 	/*
-	 * Total number of received PFC frames with transition from
-	 * XON to XOFF on Pri 4
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	uint64_t	rx_pfc_xon2xoff_frames_pri4;
+	uint64_t	resp_addr;
+	/* This is the address for statistic block. */
+	uint64_t	stats_dma_addr;
 	/*
-	 * Total number of received PFC frames with transition from
-	 * XON to XOFF on Pri 5
+	 * The statistic block update period in ms.
+	 * e.g. 250ms, 500ms, 750ms, 1000ms.
+	 * If update_period_ms is 0, then the stats update
+	 * shall be never done and the DMA address shall not be used.
+	 * In this case, the stat block can only be read by
+	 * hwrm_stat_ctx_query command.
 	 */
-	uint64_t	rx_pfc_xon2xoff_frames_pri5;
+	uint32_t	update_period_ms;
 	/*
-	 * Total number of received PFC frames with transition from
-	 * XON to XOFF on Pri 6
+	 * This field is used to specify statistics context specific
+	 * configuration flags.
 	 */
-	uint64_t	rx_pfc_xon2xoff_frames_pri6;
+	uint8_t	stat_ctx_flags;
 	/*
-	 * Total number of received PFC frames with transition from
-	 * XON to XOFF on Pri 7
+	 * When this bit is set to '1', the statistics context shall be
+	 * allocated for RoCE traffic only. In this case, traffic other
+	 * than offloaded RoCE traffic shall not be included in this
+	 * statistic context.
+	 * When this bit is set to '0', the statistics context shall be
+	 * used for the network traffic other than offloaded RoCE traffic.
 	 */
-	uint64_t	rx_pfc_xon2xoff_frames_pri7;
+	#define HWRM_STAT_CTX_ALLOC_INPUT_STAT_CTX_FLAGS_ROCE     UINT32_C(0x1)
+	uint8_t	unused_0[3];
+} __attribute__((packed));
+
+/* hwrm_stat_ctx_alloc_output (size:128b/16B) */
+struct hwrm_stat_ctx_alloc_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	/* This is the statistics context ID value. */
+	uint32_t	stat_ctx_id;
+	uint8_t	unused_0[3];
 	/*
-	 * Total number of received PFC frames with PFC enabled
-	 * bit for Pri 0
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
 	 */
-	uint64_t	rx_pfc_ena_frames_pri0;
+	uint8_t	valid;
+} __attribute__((packed));
+
+/**********************
+ * hwrm_stat_ctx_free *
+ **********************/
+
+
+/* hwrm_stat_ctx_free_input (size:192b/24B) */
+struct hwrm_stat_ctx_free_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
 	/*
-	 * Total number of received PFC frames with PFC enabled
-	 * bit for Pri 1
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
 	 */
-	uint64_t	rx_pfc_ena_frames_pri1;
+	uint16_t	cmpl_ring;
 	/*
-	 * Total number of received PFC frames with PFC enabled
-	 * bit for Pri 2
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	uint64_t	rx_pfc_ena_frames_pri2;
+	uint16_t	seq_id;
 	/*
-	 * Total number of received PFC frames with PFC enabled
-	 * bit for Pri 3
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
 	 */
-	uint64_t	rx_pfc_ena_frames_pri3;
+	uint16_t	target_id;
 	/*
-	 * Total number of received PFC frames with PFC enabled
-	 * bit for Pri 4
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	uint64_t	rx_pfc_ena_frames_pri4;
+	uint64_t	resp_addr;
+	/* ID of the statistics context that is being queried. */
+	uint32_t	stat_ctx_id;
+	uint8_t	unused_0[4];
+} __attribute__((packed));
+
+/* hwrm_stat_ctx_free_output (size:128b/16B) */
+struct hwrm_stat_ctx_free_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	/* This is the statistics context ID value. */
+	uint32_t	stat_ctx_id;
+	uint8_t	unused_0[3];
 	/*
-	 * Total number of received PFC frames with PFC enabled
-	 * bit for Pri 5
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
 	 */
-	uint64_t	rx_pfc_ena_frames_pri5;
+	uint8_t	valid;
+} __attribute__((packed));
+
+/***********************
+ * hwrm_stat_ctx_query *
+ ***********************/
+
+
+/* hwrm_stat_ctx_query_input (size:192b/24B) */
+struct hwrm_stat_ctx_query_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
 	/*
-	 * Total number of received PFC frames with PFC enabled
-	 * bit for Pri 6
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
 	 */
-	uint64_t	rx_pfc_ena_frames_pri6;
+	uint16_t	cmpl_ring;
 	/*
-	 * Total number of received PFC frames with PFC enabled
-	 * bit for Pri 7
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	uint64_t	rx_pfc_ena_frames_pri7;
-	/* Total Number of frames received with SCH CRC error */
-	uint64_t	rx_sch_crc_err_frames;
-	/* Total Number of under-sized frames received */
-	uint64_t	rx_undrsz_frames;
-	/* Total Number of fragmented frames received */
-	uint64_t	rx_frag_frames;
-	/* Total number of RX EEE LPI Events */
-	uint64_t	rx_eee_lpi_events;
-	/* EEE LPI Duration Counter on RX */
-	uint64_t	rx_eee_lpi_duration;
+	uint16_t	seq_id;
 	/*
-	 * Total number of physical type Link Level Flow Control
-	 * (LLFC) messages received
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
 	 */
-	uint64_t	rx_llfc_physical_msgs;
+	uint16_t	target_id;
 	/*
-	 * Total number of logical type Link Level Flow Control
-	 * (LLFC) messages received
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	uint64_t	rx_llfc_logical_msgs;
+	uint64_t	resp_addr;
+	/* ID of the statistics context that is being queried. */
+	uint32_t	stat_ctx_id;
+	uint8_t	unused_0[4];
+} __attribute__((packed));
+
+/* hwrm_stat_ctx_query_output (size:1408b/176B) */
+struct hwrm_stat_ctx_query_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	/* Number of transmitted unicast packets */
+	uint64_t	tx_ucast_pkts;
+	/* Number of transmitted multicast packets */
+	uint64_t	tx_mcast_pkts;
+	/* Number of transmitted broadcast packets */
+	uint64_t	tx_bcast_pkts;
+	/* Number of transmitted packets with error */
+	uint64_t	tx_err_pkts;
+	/* Number of dropped packets on transmit path */
+	uint64_t	tx_drop_pkts;
+	/* Number of transmitted bytes for unicast traffic */
+	uint64_t	tx_ucast_bytes;
+	/* Number of transmitted bytes for multicast traffic */
+	uint64_t	tx_mcast_bytes;
+	/* Number of transmitted bytes for broadcast traffic */
+	uint64_t	tx_bcast_bytes;
+	/* Number of received unicast packets */
+	uint64_t	rx_ucast_pkts;
+	/* Number of received multicast packets */
+	uint64_t	rx_mcast_pkts;
+	/* Number of received broadcast packets */
+	uint64_t	rx_bcast_pkts;
+	/* Number of received packets with error */
+	uint64_t	rx_err_pkts;
+	/* Number of dropped packets on received path */
+	uint64_t	rx_drop_pkts;
+	/* Number of received bytes for unicast traffic */
+	uint64_t	rx_ucast_bytes;
+	/* Number of received bytes for multicast traffic */
+	uint64_t	rx_mcast_bytes;
+	/* Number of received bytes for broadcast traffic */
+	uint64_t	rx_bcast_bytes;
+	/* Number of aggregated unicast packets */
+	uint64_t	rx_agg_pkts;
+	/* Number of aggregated unicast bytes */
+	uint64_t	rx_agg_bytes;
+	/* Number of aggregation events */
+	uint64_t	rx_agg_events;
+	/* Number of aborted aggregations */
+	uint64_t	rx_agg_aborts;
+	uint8_t	unused_0[7];
 	/*
-	 * Total number of logical type Link Level Flow Control
-	 * (LLFC) messages received with CRC error
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
 	 */
-	uint64_t	rx_llfc_msgs_with_crc_err;
-	/* Total number of HCFC messages received */
-	uint64_t	rx_hcfc_msgs;
-	/* Total number of HCFC messages received with CRC error */
-	uint64_t	rx_hcfc_msgs_with_crc_err;
-	/* Total number of received bytes */
-	uint64_t	rx_bytes;
-	/* Total number of bytes received in runt frames */
-	uint64_t	rx_runt_bytes;
-	/* Total number of runt frames received */
-	uint64_t	rx_runt_frames;
-	/* Total Rx Discards per Port reported by STATS block */
-	uint64_t	rx_stat_discard;
-	uint64_t	rx_stat_err;
+	uint8_t	valid;
 } __attribute__((packed));
 
-/* Port Rx Statistics extended Formats */
-/* rx_port_stats_ext (size:320b/40B) */
-struct rx_port_stats_ext {
-	/* Number of times link state changed to down */
-	uint64_t	link_down_events;
-	/* Number of times the idle rings with pause bit are found */
-	uint64_t	continuous_pause_events;
-	/* Number of times the active rings pause bit resumed back */
-	uint64_t	resume_pause_events;
-	/* Number of times, the ROCE cos queue PFC is disabled to avoid pause flood/burst */
-	uint64_t	continuous_roce_pause_events;
-	/* Number of times, the ROCE cos queue PFC is enabled back */
-	uint64_t	resume_roce_pause_events;
-} __attribute__((packed));
+/***************************
+ * hwrm_stat_ctx_clr_stats *
+ ***************************/
+
 
-/* PCIe Statistics Formats */
-/* pcie_ctx_hw_stats (size:768b/96B) */
-struct pcie_ctx_hw_stats {
-	/* Number of physical layer receiver errors */
-	uint64_t	pcie_pl_signal_integrity;
-	/* Number of DLLP CRC errors detected by Data Link Layer */
-	uint64_t	pcie_dl_signal_integrity;
+/* hwrm_stat_ctx_clr_stats_input (size:192b/24B) */
+struct hwrm_stat_ctx_clr_stats_input {
+	/* The HWRM command request type. */
+	uint16_t	req_type;
 	/*
-	 * Number of TLP LCRC and sequence number errors detected
-	 * by Data Link Layer
+	 * The completion ring to send the completion event on. This should
+	 * be the NQ ID returned from the `nq_alloc` HWRM command.
+	 */
+	uint16_t	cmpl_ring;
+	/*
+	 * The sequence ID is used by the driver for tracking multiple
+	 * commands. This ID is treated as opaque data by the firmware and
+	 * the value is returned in the `hwrm_resp_hdr` upon completion.
 	 */
-	uint64_t	pcie_tl_signal_integrity;
-	/* Number of times LTSSM entered Recovery state */
-	uint64_t	pcie_link_integrity;
-	/* Number of TLP bytes that have been trasmitted */
-	uint64_t	pcie_tx_traffic_rate;
-	/* Number of TLP bytes that have been received */
-	uint64_t	pcie_rx_traffic_rate;
-	/* Number of DLLP bytes that have been trasmitted */
-	uint64_t	pcie_tx_dllp_statistics;
-	/* Number of DLLP bytes that have been received */
-	uint64_t	pcie_rx_dllp_statistics;
+	uint16_t	seq_id;
+	/*
+	 * The target ID of the command:
+	 * * 0x0-0xFFF8 - The function ID
+	 * * 0xFFF8-0xFFFE - Reserved for internal processors
+	 * * 0xFFFF - HWRM
+	 */
+	uint16_t	target_id;
 	/*
-	 * Number of times spent in each phase of gen3
-	 * equalization
+	 * A physical address pointer pointing to a host buffer that the
+	 * command's response data will be written. This can be either a host
+	 * physical address (HPA) or a guest physical address (GPA) and must
+	 * point to a physically contiguous block of memory.
 	 */
-	uint64_t	pcie_equalization_time;
-	/* Records the last 16 transitions of the LTSSM */
-	uint32_t	pcie_ltssm_histogram[4];
+	uint64_t	resp_addr;
+	/* ID of the statistics context that is being queried. */
+	uint32_t	stat_ctx_id;
+	uint8_t	unused_0[4];
+} __attribute__((packed));
+
+/* hwrm_stat_ctx_clr_stats_output (size:128b/16B) */
+struct hwrm_stat_ctx_clr_stats_output {
+	/* The specific error status for the command. */
+	uint16_t	error_code;
+	/* The HWRM command request type. */
+	uint16_t	req_type;
+	/* The sequence ID from the original command. */
+	uint16_t	seq_id;
+	/* The length of the response data in number of bytes. */
+	uint16_t	resp_len;
+	uint8_t	unused_0[7];
 	/*
-	 * Record the last 8 reasons on why LTSSM transitioned
-	 * to Recovery
+	 * This field is used in Output records to indicate that the output
+	 * is completely written to RAM.  This field should be read as '1'
+	 * to indicate that the output has been completely written.
+	 * When writing a command completion or response to an internal processor,
+	 * the order of writes has to be such that this field is written last.
 	 */
-	uint64_t	pcie_recovery_histogram;
+	uint8_t	valid;
 } __attribute__((packed));
 
 /**********************
@@ -28109,103 +21943,4 @@ struct hwrm_nvm_validate_option_cmd_err {
 	uint8_t	unused_0[7];
 } __attribute__((packed));
 
-/*****************************
- * hwrm_nvm_factory_defaults *
- *****************************/
-
-
-/* hwrm_nvm_factory_defaults_input (size:192b/24B) */
-struct hwrm_nvm_factory_defaults_input {
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/*
-	 * The completion ring to send the completion event on. This should
-	 * be the NQ ID returned from the `nq_alloc` HWRM command.
-	 */
-	uint16_t	cmpl_ring;
-	/*
-	 * The sequence ID is used by the driver for tracking multiple
-	 * commands. This ID is treated as opaque data by the firmware and
-	 * the value is returned in the `hwrm_resp_hdr` upon completion.
-	 */
-	uint16_t	seq_id;
-	/*
-	 * The target ID of the command:
-	 * * 0x0-0xFFF8 - The function ID
-	 * * 0xFFF8-0xFFFE - Reserved for internal processors
-	 * * 0xFFFF - HWRM
-	 */
-	uint16_t	target_id;
-	/*
-	 * A physical address pointer pointing to a host buffer that the
-	 * command's response data will be written. This can be either a host
-	 * physical address (HPA) or a guest physical address (GPA) and must
-	 * point to a physically contiguous block of memory.
-	 */
-	uint64_t	resp_addr;
-	/* mode is 8 b */
-	uint8_t	mode;
-	/* If set to 1, it will trigger restoration of factory default settings */
-	#define HWRM_NVM_FACTORY_DEFAULTS_INPUT_MODE_RESTORE UINT32_C(0x0)
-	/* If set to 1, it will trigger creation of factory default settings */
-	#define HWRM_NVM_FACTORY_DEFAULTS_INPUT_MODE_CREATE  UINT32_C(0x1)
-	#define HWRM_NVM_FACTORY_DEFAULTS_INPUT_MODE_LAST \
-		HWRM_NVM_FACTORY_DEFAULTS_INPUT_MODE_CREATE
-	uint8_t	unused_0[7];
-} __attribute__((packed));
-
-/* hwrm_nvm_factory_defaults_output (size:128b/16B) */
-struct hwrm_nvm_factory_defaults_output {
-	/* The specific error status for the command. */
-	uint16_t	error_code;
-	/* The HWRM command request type. */
-	uint16_t	req_type;
-	/* The sequence ID from the original command. */
-	uint16_t	seq_id;
-	/* The length of the response data in number of bytes. */
-	uint16_t	resp_len;
-	uint8_t	result;
-	/* factory defaults created successfully. */
-	#define HWRM_NVM_FACTORY_DEFAULTS_OUTPUT_RESULT_CREATE_OK \
-		UINT32_C(0x0)
-	/* factory defaults restored successfully. */
-	#define HWRM_NVM_FACTORY_DEFAULTS_OUTPUT_RESULT_RESTORE_OK \
-		UINT32_C(0x1)
-	/* factory defaults already created. */
-	#define HWRM_NVM_FACTORY_DEFAULTS_OUTPUT_RESULT_CREATE_ALREADY \
-		UINT32_C(0x2)
-	#define HWRM_NVM_FACTORY_DEFAULTS_OUTPUT_RESULT_LAST \
-		HWRM_NVM_FACTORY_DEFAULTS_OUTPUT_RESULT_CREATE_ALREADY
-	uint8_t	unused_0[6];
-	/*
-	 * This field is used in Output records to indicate that the output
-	 * is completely written to RAM.  This field should be read as '1'
-	 * to indicate that the output has been completely written.
-	 * When writing a command completion or response to an internal processor,
-	 * the order of writes has to be such that this field is written last.
-	 */
-	uint8_t	valid;
-} __attribute__((packed));
-
-/* hwrm_nvm_factory_defaults_cmd_err (size:64b/8B) */
-struct hwrm_nvm_factory_defaults_cmd_err {
-	/*
-	 * command specific error codes that goes to
-	 * the cmd_err field in Common HWRM Error Response.
-	 */
-	uint8_t	code;
-	/* Unknown error */
-	#define HWRM_NVM_FACTORY_DEFAULTS_CMD_ERR_CODE_UNKNOWN \
-		UINT32_C(0x0)
-	/* valid configuration not present to create defaults */
-	#define HWRM_NVM_FACTORY_DEFAULTS_CMD_ERR_CODE_NO_VALID_CFG \
-		UINT32_C(0x1)
-	/* No saved configuration present to restore, restore failed */
-	#define HWRM_NVM_FACTORY_DEFAULTS_CMD_ERR_CODE_NO_SAVED_CFG \
-		UINT32_C(0x2)
-	#define HWRM_NVM_FACTORY_DEFAULTS_CMD_ERR_CODE_LAST \
-		HWRM_NVM_FACTORY_DEFAULTS_CMD_ERR_CODE_NO_SAVED_CFG
-	uint8_t	unused_0[7];
-} __attribute__((packed));
-
 #endif /* _HSI_STRUCT_DEF_DPDK_H_ */
