diff mbox series

[3/3] app/testpmd: fix mixed use of RX/Rx/TX/Tx in testpmd

Message ID 1614905757-33791-4-git-send-email-oulijun@huawei.com (mailing list archive)
State Superseded
Delegated to: Ferruh Yigit
Headers show
Series testpmd updates | expand

Checks

Context Check Description
ci/Intel-compilation fail Compilation issues
ci/checkpatch success coding style OK

Commit Message

Lijun Ou March 5, 2021, 12:55 a.m. UTC 
From: Hongbo Zheng <zhenghongbo3@huawei.com>

In testpmd, when we input "show config rxtx", we can see like this:

1: testpmd> show config rxtx
2:   io packet forwarding packets/burst=32
3:   nb forwarding cores=1 - nb forwarding ports=1
4:   port 0: RX queue number: 1 Tx queue number: 1
5:     Rx offloads=0x0 Tx offloads=0x10000
6:     RX queue: 0
7:       RX desc=1024 - RX free threshold=32
8:       RX threshold registers: pthresh=0 hthresh=0  wthresh=0
9:       RX Offloads=0x0
10:    TX queue: 0
11:      TX desc=1024 - TX free threshold=928
12:      TX threshold registers: pthresh=0 hthresh=0  wthresh=0
13:      TX offloads=0x10000 - TX RS bit threshold=32

In line 4, RX/Tx is mixed used. Also in other lines, RX/Rx/TX/Tx is
mixed used.

This patch fix the mixed use of RX/Rx/TX/Tx in testpmd command
"show config rxtx" output by change to unified use Rx/Tx.

Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
---
 app/test-pmd/config.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

Comments

Li, Xiaoyun March 5, 2021, 3:25 a.m. UTC | #1 
Hi

> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Lijun Ou
> Sent: Friday, March 5, 2021 08:56
> To: Yigit, Ferruh <ferruh.yigit@intel.com>
> Cc: dev@dpdk.org; linuxarm@openeuler.org
> Subject: [dpdk-dev] [PATCH 3/3] app/testpmd: fix mixed use of RX/Rx/TX/Tx in
> testpmd
> 
> From: Hongbo Zheng <zhenghongbo3@huawei.com>
> 
> In testpmd, when we input "show config rxtx", we can see like this:
> 
> 1: testpmd> show config rxtx
> 2:   io packet forwarding packets/burst=32
> 3:   nb forwarding cores=1 - nb forwarding ports=1
> 4:   port 0: RX queue number: 1 Tx queue number: 1
> 5:     Rx offloads=0x0 Tx offloads=0x10000
> 6:     RX queue: 0
> 7:       RX desc=1024 - RX free threshold=32
> 8:       RX threshold registers: pthresh=0 hthresh=0  wthresh=0
> 9:       RX Offloads=0x0
> 10:    TX queue: 0
> 11:      TX desc=1024 - TX free threshold=928
> 12:      TX threshold registers: pthresh=0 hthresh=0  wthresh=0
> 13:      TX offloads=0x10000 - TX RS bit threshold=32
> 
> In line 4, RX/Tx is mixed used. Also in other lines, RX/Rx/TX/Tx is mixed used.

If you're going to unify the print to only use "Rx/Tx" in testpmd as your title said.
There're a lot of more places using RX/TX when printing. You should change them too.

> 
> This patch fix the mixed use of RX/Rx/TX/Tx in testpmd command "show config
> rxtx" output by change to unified use Rx/Tx.
> 
> Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
> Signed-off-by: Lijun Ou <oulijun@huawei.com>
> ---
>  app/test-pmd/config.c | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index
> 576d5ac..2435c26 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -2505,7 +2505,7 @@ rxtx_config_display(void)
>  		int32_t rc;
> 
>  		/* per port config */
> -		printf("  port %d: RX queue number: %d Tx queue
> number: %d\n",
> +		printf("  port %d: Rx queue number: %d Tx queue number: %d\n",
>  				(unsigned int)pid, nb_rxq, nb_txq);
> 
>  		printf("    Rx offloads=0x%"PRIx64" Tx offloads=0x%"PRIx64"\n",
> @@ -2533,13 +2533,13 @@ rxtx_config_display(void)
>  				offloads_tmp = rx_qinfo.conf.offloads;
>  			}
> 
> -			printf("    RX queue: %d\n", qid);
> -			printf("      RX desc=%d - RX free threshold=%d\n",
> +			printf("    Rx queue: %d\n", qid);
> +			printf("      Rx desc=%d - Rx free threshold=%d\n",
>  				nb_rx_desc_tmp, rx_free_thresh_tmp);
> -			printf("      RX threshold registers: pthresh=%d
> hthresh=%d "
> +			printf("      Rx threshold registers: pthresh=%d
> hthresh=%d "
>  				" wthresh=%d\n",
>  				pthresh_tmp, hthresh_tmp, wthresh_tmp);
> -			printf("      RX Offloads=0x%"PRIx64"\n", offloads_tmp);
> +			printf("      Rx Offloads=0x%"PRIx64"\n", offloads_tmp);
>  		}
> 
>  		/* per tx queue config only for first queue to be less verbose */
> @@ -2565,13 +2565,13 @@ rxtx_config_display(void)
>  				tx_rs_thresh_tmp = tx_qinfo.conf.tx_rs_thresh;
>  			}
> 
> -			printf("    TX queue: %d\n", qid);
> -			printf("      TX desc=%d - TX free threshold=%d\n",
> +			printf("    Tx queue: %d\n", qid);
> +			printf("      Tx desc=%d - Tx free threshold=%d\n",
>  				nb_tx_desc_tmp, tx_free_thresh_tmp);
> -			printf("      TX threshold registers: pthresh=%d
> hthresh=%d "
> +			printf("      Tx threshold registers: pthresh=%d
> hthresh=%d "
>  				" wthresh=%d\n",
>  				pthresh_tmp, hthresh_tmp, wthresh_tmp);
> -			printf("      TX offloads=0x%"PRIx64" - TX RS bit
> threshold=%d\n",
> +			printf("      Tx offloads=0x%"PRIx64" - Tx RS bit
> threshold=%d\n",
>  				offloads_tmp, tx_rs_thresh_tmp);
>  		}
>  	}
> --
> 2.7.4
Lijun Ou March 5, 2021, 6:13 a.m. UTC | #2 
在 2021/3/5 11:25, Li, Xiaoyun 写道:
> Hi
> 
>> -----Original Message-----
>> From: dev <dev-bounces@dpdk.org> On Behalf Of Lijun Ou
>> Sent: Friday, March 5, 2021 08:56
>> To: Yigit, Ferruh <ferruh.yigit@intel.com>
>> Cc: dev@dpdk.org; linuxarm@openeuler.org
>> Subject: [dpdk-dev] [PATCH 3/3] app/testpmd: fix mixed use of RX/Rx/TX/Tx in
>> testpmd
>>
>> From: Hongbo Zheng <zhenghongbo3@huawei.com>
>>
>> In testpmd, when we input "show config rxtx", we can see like this:
>>
>> 1: testpmd> show config rxtx
>> 2:   io packet forwarding packets/burst=32
>> 3:   nb forwarding cores=1 - nb forwarding ports=1
>> 4:   port 0: RX queue number: 1 Tx queue number: 1
>> 5:     Rx offloads=0x0 Tx offloads=0x10000
>> 6:     RX queue: 0
>> 7:       RX desc=1024 - RX free threshold=32
>> 8:       RX threshold registers: pthresh=0 hthresh=0  wthresh=0
>> 9:       RX Offloads=0x0
>> 10:    TX queue: 0
>> 11:      TX desc=1024 - TX free threshold=928
>> 12:      TX threshold registers: pthresh=0 hthresh=0  wthresh=0
>> 13:      TX offloads=0x10000 - TX RS bit threshold=32
>>
>> In line 4, RX/Tx is mixed used. Also in other lines, RX/Rx/TX/Tx is mixed used.
> 
> If you're going to unify the print to only use "Rx/Tx" in testpmd as your title said.
> There're a lot of more places using RX/TX when printing. You should change them too.
> 
OK， I will do it.
>>
>> This patch fix the mixed use of RX/Rx/TX/Tx in testpmd command "show config
>> rxtx" output by change to unified use Rx/Tx.
>>
>> Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
>> Signed-off-by: Lijun Ou <oulijun@huawei.com>
>> ---
>>   app/test-pmd/config.c | 18 +++++++++---------
>>   1 file changed, 9 insertions(+), 9 deletions(-)
>>
>> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index
>> 576d5ac..2435c26 100644
>> --- a/app/test-pmd/config.c
>> +++ b/app/test-pmd/config.c
>> @@ -2505,7 +2505,7 @@ rxtx_config_display(void)
>>   		int32_t rc;
>>
>>   		/* per port config */
>> -		printf("  port %d: RX queue number: %d Tx queue
>> number: %d\n",
>> +		printf("  port %d: Rx queue number: %d Tx queue number: %d\n",
>>   				(unsigned int)pid, nb_rxq, nb_txq);
>>
>>   		printf("    Rx offloads=0x%"PRIx64" Tx offloads=0x%"PRIx64"\n",
>> @@ -2533,13 +2533,13 @@ rxtx_config_display(void)
>>   				offloads_tmp = rx_qinfo.conf.offloads;
>>   			}
>>
>> -			printf("    RX queue: %d\n", qid);
>> -			printf("      RX desc=%d - RX free threshold=%d\n",
>> +			printf("    Rx queue: %d\n", qid);
>> +			printf("      Rx desc=%d - Rx free threshold=%d\n",
>>   				nb_rx_desc_tmp, rx_free_thresh_tmp);
>> -			printf("      RX threshold registers: pthresh=%d
>> hthresh=%d "
>> +			printf("      Rx threshold registers: pthresh=%d
>> hthresh=%d "
>>   				" wthresh=%d\n",
>>   				pthresh_tmp, hthresh_tmp, wthresh_tmp);
>> -			printf("      RX Offloads=0x%"PRIx64"\n", offloads_tmp);
>> +			printf("      Rx Offloads=0x%"PRIx64"\n", offloads_tmp);
>>   		}
>>
>>   		/* per tx queue config only for first queue to be less verbose */
>> @@ -2565,13 +2565,13 @@ rxtx_config_display(void)
>>   				tx_rs_thresh_tmp = tx_qinfo.conf.tx_rs_thresh;
>>   			}
>>
>> -			printf("    TX queue: %d\n", qid);
>> -			printf("      TX desc=%d - TX free threshold=%d\n",
>> +			printf("    Tx queue: %d\n", qid);
>> +			printf("      Tx desc=%d - Tx free threshold=%d\n",
>>   				nb_tx_desc_tmp, tx_free_thresh_tmp);
>> -			printf("      TX threshold registers: pthresh=%d
>> hthresh=%d "
>> +			printf("      Tx threshold registers: pthresh=%d
>> hthresh=%d "
>>   				" wthresh=%d\n",
>>   				pthresh_tmp, hthresh_tmp, wthresh_tmp);
>> -			printf("      TX offloads=0x%"PRIx64" - TX RS bit
>> threshold=%d\n",
>> +			printf("      Tx offloads=0x%"PRIx64" - Tx RS bit
>> threshold=%d\n",
>>   				offloads_tmp, tx_rs_thresh_tmp);
>>   		}
>>   	}
>> --
>> 2.7.4
> 
> .
>
diff mbox series

Patch

diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 576d5ac..2435c26 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -2505,7 +2505,7 @@  rxtx_config_display(void)
 		int32_t rc;
 
 		/* per port config */
-		printf("  port %d: RX queue number: %d Tx queue number: %d\n",
+		printf("  port %d: Rx queue number: %d Tx queue number: %d\n",
 				(unsigned int)pid, nb_rxq, nb_txq);
 
 		printf("    Rx offloads=0x%"PRIx64" Tx offloads=0x%"PRIx64"\n",
@@ -2533,13 +2533,13 @@  rxtx_config_display(void)
 				offloads_tmp = rx_qinfo.conf.offloads;
 			}
 
-			printf("    RX queue: %d\n", qid);
-			printf("      RX desc=%d - RX free threshold=%d\n",
+			printf("    Rx queue: %d\n", qid);
+			printf("      Rx desc=%d - Rx free threshold=%d\n",
 				nb_rx_desc_tmp, rx_free_thresh_tmp);
-			printf("      RX threshold registers: pthresh=%d hthresh=%d "
+			printf("      Rx threshold registers: pthresh=%d hthresh=%d "
 				" wthresh=%d\n",
 				pthresh_tmp, hthresh_tmp, wthresh_tmp);
-			printf("      RX Offloads=0x%"PRIx64"\n", offloads_tmp);
+			printf("      Rx Offloads=0x%"PRIx64"\n", offloads_tmp);
 		}
 
 		/* per tx queue config only for first queue to be less verbose */
@@ -2565,13 +2565,13 @@  rxtx_config_display(void)
 				tx_rs_thresh_tmp = tx_qinfo.conf.tx_rs_thresh;
 			}
 
-			printf("    TX queue: %d\n", qid);
-			printf("      TX desc=%d - TX free threshold=%d\n",
+			printf("    Tx queue: %d\n", qid);
+			printf("      Tx desc=%d - Tx free threshold=%d\n",
 				nb_tx_desc_tmp, tx_free_thresh_tmp);
-			printf("      TX threshold registers: pthresh=%d hthresh=%d "
+			printf("      Tx threshold registers: pthresh=%d hthresh=%d "
 				" wthresh=%d\n",
 				pthresh_tmp, hthresh_tmp, wthresh_tmp);
-			printf("      TX offloads=0x%"PRIx64" - TX RS bit threshold=%d\n",
+			printf("      Tx offloads=0x%"PRIx64" - Tx RS bit threshold=%d\n",
 				offloads_tmp, tx_rs_thresh_tmp);
 		}
 	}