diff mbox series

[4/5] net/mlx5: add ethernet type validation on E-Switch

Message ID 1545924885-6215-5-git-send-email-viacheslavo@mellanox.com (mailing list archive)
State Accepted, archived
Delegated to: Shahaf Shuler
Headers show
Series net/mlx5: add inner tunnel items support on E-Switch | expand

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel-compilation success Compilation OK

Commit Message

Slava Ovsiienko Dec. 27, 2018, 3:34 p.m. UTC
This patch updates the validation routine for the E-Switch Flows.
The ethernet type field can be specified within inner and outer
tunnel ethernet items, by vlan item or implicitly deduced from
IP address items. The validation routine checks all these items
and their combinations for mutual compatibility issues and possible
conflicts.

Cc: stable@dpdk.org

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
---
 drivers/net/mlx5/mlx5_flow_tcf.c | 114 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 113 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/mlx5/mlx5_flow_tcf.c b/drivers/net/mlx5/mlx5_flow_tcf.c
index 688422d..e70c377 100644
--- a/drivers/net/mlx5/mlx5_flow_tcf.c
+++ b/drivers/net/mlx5/mlx5_flow_tcf.c
@@ -1695,9 +1695,12 @@  struct pedit_parser {
 		const struct rte_flow_action_set_ipv6 *set_ipv6;
 	} conf;
 	const struct rte_flow_item *outer_udp = NULL;
+	rte_be16_t inner_etype = RTE_BE16(ETH_P_ALL);
+	rte_be16_t outer_etype = RTE_BE16(ETH_P_ALL);
+	rte_be16_t vlan_etype = RTE_BE16(ETH_P_ALL);
 	uint64_t item_flags = 0;
 	uint64_t action_flags = 0;
-	uint8_t next_protocol = -1;
+	uint8_t next_protocol = 0xff;
 	unsigned int tcm_ifindex = 0;
 	uint8_t pedit_validated = 0;
 	struct flow_tcf_ptoi ptoi[PTOI_TABLE_SZ_MAX(dev)];
@@ -1963,6 +1966,32 @@  struct pedit_parser {
 					 mask.eth,
 					 "no support for partial mask on"
 					 " \"type\" field");
+			assert(items->spec);
+			spec.eth = items->spec;
+			if (mask.eth->type &&
+			    (item_flags & MLX5_FLOW_LAYER_TUNNEL) &&
+			    inner_etype != RTE_BE16(ETH_P_ALL) &&
+			    inner_etype != spec.eth->type)
+				return rte_flow_error_set
+					(error, EINVAL,
+					 RTE_FLOW_ERROR_TYPE_ITEM,
+					 items,
+					 "inner eth_type conflict");
+			if (mask.eth->type &&
+			    !(item_flags & MLX5_FLOW_LAYER_TUNNEL) &&
+			    outer_etype != RTE_BE16(ETH_P_ALL) &&
+			    outer_etype != spec.eth->type)
+				return rte_flow_error_set
+					(error, EINVAL,
+					 RTE_FLOW_ERROR_TYPE_ITEM,
+					 items,
+					 "outer eth_type conflict");
+			if (mask.eth->type) {
+				if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
+					inner_etype = spec.eth->type;
+				else
+					outer_etype = spec.eth->type;
+			}
 			break;
 		case RTE_FLOW_ITEM_TYPE_VLAN:
 			if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
@@ -1999,6 +2028,27 @@  struct pedit_parser {
 					 "no support for partial masks on"
 					 " \"tci\" (PCP and VID parts) and"
 					 " \"inner_type\" fields");
+			if (outer_etype != RTE_BE16(ETH_P_ALL) &&
+			    outer_etype != RTE_BE16(ETH_P_8021Q))
+				return rte_flow_error_set
+					(error, EINVAL,
+					 RTE_FLOW_ERROR_TYPE_ITEM,
+					 items,
+					 "outer eth_type conflict,"
+					 " must be 802.1Q");
+			outer_etype = RTE_BE16(ETH_P_8021Q);
+			assert(items->spec);
+			spec.vlan = items->spec;
+			if (mask.vlan->inner_type &&
+			    vlan_etype != RTE_BE16(ETH_P_ALL) &&
+			    vlan_etype != spec.vlan->inner_type)
+				return rte_flow_error_set
+					(error, EINVAL,
+					 RTE_FLOW_ERROR_TYPE_ITEM,
+					 items,
+					 "vlan eth_type conflict");
+			if (mask.vlan->inner_type)
+				vlan_etype = spec.vlan->inner_type;
 			break;
 		case RTE_FLOW_ITEM_TYPE_IPV4:
 			ret = mlx5_flow_validate_item_ipv4(items, item_flags,
@@ -2028,6 +2078,37 @@  struct pedit_parser {
 				next_protocol =
 					((const struct rte_flow_item_ipv4 *)
 					 (items->spec))->hdr.next_proto_id;
+			if (item_flags & MLX5_FLOW_LAYER_TUNNEL) {
+				if (inner_etype != RTE_BE16(ETH_P_ALL) &&
+				    inner_etype != RTE_BE16(ETH_P_IP))
+					return rte_flow_error_set
+						(error, EINVAL,
+						 RTE_FLOW_ERROR_TYPE_ITEM,
+						 items,
+						 "inner eth_type conflict,"
+						 " IPv4 is required");
+				inner_etype = RTE_BE16(ETH_P_IP);
+			} else if (item_flags & MLX5_FLOW_LAYER_OUTER_VLAN) {
+				if (vlan_etype != RTE_BE16(ETH_P_ALL) &&
+				    vlan_etype != RTE_BE16(ETH_P_IP))
+					return rte_flow_error_set
+						(error, EINVAL,
+						 RTE_FLOW_ERROR_TYPE_ITEM,
+						 items,
+						 "vlan eth_type conflict,"
+						 " IPv4 is required");
+				vlan_etype = RTE_BE16(ETH_P_IP);
+			} else {
+				if (outer_etype != RTE_BE16(ETH_P_ALL) &&
+				    outer_etype != RTE_BE16(ETH_P_IP))
+					return rte_flow_error_set
+						(error, EINVAL,
+						 RTE_FLOW_ERROR_TYPE_ITEM,
+						 items,
+						 "eth_type conflict,"
+						 " IPv4 is required");
+				outer_etype = RTE_BE16(ETH_P_IP);
+			}
 			break;
 		case RTE_FLOW_ITEM_TYPE_IPV6:
 			ret = mlx5_flow_validate_item_ipv6(items, item_flags,
@@ -2057,6 +2138,37 @@  struct pedit_parser {
 				next_protocol =
 					((const struct rte_flow_item_ipv6 *)
 					 (items->spec))->hdr.proto;
+			if (item_flags & MLX5_FLOW_LAYER_TUNNEL) {
+				if (inner_etype != RTE_BE16(ETH_P_ALL) &&
+				    inner_etype != RTE_BE16(ETH_P_IPV6))
+					return rte_flow_error_set
+						(error, EINVAL,
+						 RTE_FLOW_ERROR_TYPE_ITEM,
+						 items,
+						 "inner eth_type conflict,"
+						 " IPv6 is required");
+				inner_etype = RTE_BE16(ETH_P_IPV6);
+			} else if (item_flags & MLX5_FLOW_LAYER_OUTER_VLAN) {
+				if (vlan_etype != RTE_BE16(ETH_P_ALL) &&
+				    vlan_etype != RTE_BE16(ETH_P_IPV6))
+					return rte_flow_error_set
+						(error, EINVAL,
+						 RTE_FLOW_ERROR_TYPE_ITEM,
+						 items,
+						 "vlan eth_type conflict,"
+						 " IPv6 is required");
+				vlan_etype = RTE_BE16(ETH_P_IPV6);
+			} else {
+				if (outer_etype != RTE_BE16(ETH_P_ALL) &&
+				    outer_etype != RTE_BE16(ETH_P_IPV6))
+					return rte_flow_error_set
+						(error, EINVAL,
+						 RTE_FLOW_ERROR_TYPE_ITEM,
+						 items,
+						 "eth_type conflict,"
+						 " IPv6 is required");
+				outer_etype = RTE_BE16(ETH_P_IPV6);
+			}
 			break;
 		case RTE_FLOW_ITEM_TYPE_UDP:
 			ret = mlx5_flow_validate_item_udp(items, item_flags,