diff mbox series

[1/5] net/mlx5: remove checks for outer tunnel items on E-Switch

Message ID 1545924885-6215-2-git-send-email-viacheslavo@mellanox.com (mailing list archive)
State Accepted, archived
Delegated to: Shahaf Shuler
Headers show
Series net/mlx5: add inner tunnel items support on E-Switch | expand

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/mellanox-Performance-Testing success Performance Testing PASS
ci/intel-Performance-Testing success Performance Testing PASS
ci/Intel-compilation success Compilation OK

Commit Message

Slava Ovsiienko Dec. 27, 2018, 3:34 p.m. UTC
This patch removes unnecessary outer tunnel parameters check in the
validation routine for the E-Switch Flows. IPv4/IPv6 may have any
spec and mask, and transferred to tc without changes, all checks
are performed by kernel.

We are going to support Flows matching with outer tunnel items
and not containing the explicit tunnel decap action (this one
might be drop, redirect or table jump, for exapmle). So we can
not rely on presence of tunnel decap action in the list to decide
whether the Flow is for tunnel, instead we will use the presence
of tunnel item (like RTE_FLOW_ITEM_TYPE_VXLAN) in the item list.
The tunnel pattern checks within Flow validation routine are
rebound to presence of tunnel item. VXLAN decap action checks
for presence of VXLAN VNI item.

The tunnel UDP item is checked at the point of processing the tunnel
item (i.e. VXLAN). We can not perform UDP item check as tunnel once
UDP item encountered in the list, because it is not known yet whether
the tunnel item follows. The pointer to UDP item is saved and
checked as outer ones if tunnel item found.

Cc: stable@dpdk.org

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
---
 drivers/net/mlx5/mlx5_flow_tcf.c | 239 +++++++++++----------------------------
 1 file changed, 63 insertions(+), 176 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/mlx5/mlx5_flow_tcf.c b/drivers/net/mlx5/mlx5_flow_tcf.c
index fb284c3..e59e638 100644
--- a/drivers/net/mlx5/mlx5_flow_tcf.c
+++ b/drivers/net/mlx5/mlx5_flow_tcf.c
@@ -1584,141 +1584,8 @@  struct pedit_parser {
 }
 
 /**
- * Validate RTE_FLOW_ITEM_TYPE_IPV4 item if VXLAN_DECAP action
- * is present in actions list.
- *
- * @param[in] ipv4
- *   Outer IPv4 address item (if any, NULL otherwise).
- * @param[out] error
- *   Pointer to the error structure.
- *
- * @return
- *   0 on success, a negative errno value otherwise and rte_ernno is set.
- **/
-static int
-flow_tcf_validate_vxlan_decap_ipv4(const struct rte_flow_item *ipv4,
-				   struct rte_flow_error *error)
-{
-	const struct rte_flow_item_ipv4 *spec = ipv4->spec;
-	const struct rte_flow_item_ipv4 *mask = ipv4->mask;
-
-	if (!spec) {
-		/*
-		 * Specification for IP addresses cannot be empty
-		 * because it is required as decap parameter.
-		 */
-		return rte_flow_error_set(error, EINVAL,
-					  RTE_FLOW_ERROR_TYPE_ITEM, ipv4,
-					  "NULL outer ipv4 address"
-					  " specification for vxlan"
-					  " for vxlan decapsulation");
-	}
-	if (!mask)
-		mask = &rte_flow_item_ipv4_mask;
-	if (mask->hdr.dst_addr != RTE_BE32(0x00000000)) {
-		if (mask->hdr.dst_addr != RTE_BE32(0xffffffff))
-			return rte_flow_error_set
-					(error, ENOTSUP,
-					 RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
-					 "no support for partial mask on"
-					 " \"ipv4.hdr.dst_addr\" field");
-		/* More IP address validations can be put here. */
-	} else {
-		/*
-		 * Kernel uses the destination IP address
-		 * to determine the ingress network interface
-		 * for traffic being decapsulated.
-		 */
-		return rte_flow_error_set(error, EINVAL,
-					  RTE_FLOW_ERROR_TYPE_ITEM, ipv4,
-					  "outer ipv4 destination address"
-					  " must be specified for"
-					  " vxlan decapsulation");
-	}
-	/* Source IP address is optional for decap. */
-	if (mask->hdr.src_addr != RTE_BE32(0x00000000) &&
-	    mask->hdr.src_addr != RTE_BE32(0xffffffff))
-		return rte_flow_error_set(error, ENOTSUP,
-					  RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
-					  "no support for partial mask on"
-					  " \"ipv4.hdr.src_addr\" field");
-	return 0;
-}
-
-/**
- * Validate RTE_FLOW_ITEM_TYPE_IPV6 item if VXLAN_DECAP action
- * is present in actions list.
- *
- * @param[in] ipv6
- *   Outer IPv6 address item (if any, NULL otherwise).
- * @param[out] error
- *   Pointer to the error structure.
- *
- * @return
- *   0 on success, a negative errno value otherwise and rte_ernno is set.
- **/
-static int
-flow_tcf_validate_vxlan_decap_ipv6(const struct rte_flow_item *ipv6,
-				   struct rte_flow_error *error)
-{
-	const struct rte_flow_item_ipv6 *spec = ipv6->spec;
-	const struct rte_flow_item_ipv6 *mask = ipv6->mask;
-
-	if (!spec) {
-		/*
-		 * Specification for IP addresses cannot be empty
-		 * because it is required as decap parameter.
-		 */
-		return rte_flow_error_set(error, EINVAL,
-					  RTE_FLOW_ERROR_TYPE_ITEM, ipv6,
-					  "NULL outer ipv6 address"
-					  " specification for vxlan"
-					  " decapsulation");
-	}
-	if (!mask)
-		mask = &rte_flow_item_ipv6_mask;
-	if (memcmp(&mask->hdr.dst_addr,
-		   &flow_tcf_mask_empty.ipv6.hdr.dst_addr,
-		   IPV6_ADDR_LEN)) {
-		if (memcmp(&mask->hdr.dst_addr,
-			&rte_flow_item_ipv6_mask.hdr.dst_addr,
-			IPV6_ADDR_LEN))
-			return rte_flow_error_set
-					(error, ENOTSUP,
-					 RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
-					 "no support for partial mask on"
-					 " \"ipv6.hdr.dst_addr\" field");
-		/* More IP address validations can be put here. */
-	} else {
-		/*
-		 * Kernel uses the destination IP address
-		 * to determine the ingress network interface
-		 * for traffic being decapsulated.
-		 */
-		return rte_flow_error_set(error, EINVAL,
-					  RTE_FLOW_ERROR_TYPE_ITEM, ipv6,
-					  "outer ipv6 destination address must be "
-					  "specified for vxlan decapsulation");
-	}
-	/* Source IP address is optional for decap. */
-	if (memcmp(&mask->hdr.src_addr,
-		   &flow_tcf_mask_empty.ipv6.hdr.src_addr,
-		   IPV6_ADDR_LEN)) {
-		if (memcmp(&mask->hdr.src_addr,
-			   &rte_flow_item_ipv6_mask.hdr.src_addr,
-			   IPV6_ADDR_LEN))
-			return rte_flow_error_set
-					(error, ENOTSUP,
-					 RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
-					 "no support for partial mask on"
-					 " \"ipv6.hdr.src_addr\" field");
-	}
-	return 0;
-}
-
-/**
- * Validate RTE_FLOW_ITEM_TYPE_UDP item if VXLAN_DECAP action
- * is present in actions list.
+ * Validate outer RTE_FLOW_ITEM_TYPE_UDP item if tunnel item
+ * RTE_FLOW_ITEM_TYPE_VXLAN is present in item list.
  *
  * @param[in] udp
  *   Outer UDP layer item (if any, NULL otherwise).
@@ -1726,7 +1593,7 @@  struct pedit_parser {
  *   Pointer to the error structure.
  *
  * @return
- *   0 on success, a negative errno value otherwise and rte_ernno is set.
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
  **/
 static int
 flow_tcf_validate_vxlan_decap_udp(const struct rte_flow_item *udp,
@@ -1825,6 +1692,7 @@  struct pedit_parser {
 		const struct rte_flow_action_set_ipv4 *set_ipv4;
 		const struct rte_flow_action_set_ipv6 *set_ipv6;
 	} conf;
+	const struct rte_flow_item *outer_udp = NULL;
 	uint64_t item_flags = 0;
 	uint64_t action_flags = 0;
 	uint8_t next_protocol = -1;
@@ -2151,12 +2019,6 @@  struct pedit_parser {
 				next_protocol =
 					((const struct rte_flow_item_ipv4 *)
 					 (items->spec))->hdr.next_proto_id;
-			if (action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) {
-				ret = flow_tcf_validate_vxlan_decap_ipv4
-								(items, error);
-				if (ret < 0)
-					return ret;
-			}
 			break;
 		case RTE_FLOW_ITEM_TYPE_IPV6:
 			ret = mlx5_flow_validate_item_ipv6(items, item_flags,
@@ -2184,12 +2046,6 @@  struct pedit_parser {
 				next_protocol =
 					((const struct rte_flow_item_ipv6 *)
 					 (items->spec))->hdr.proto;
-			if (action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) {
-				ret = flow_tcf_validate_vxlan_decap_ipv6
-								(items, error);
-				if (ret < 0)
-					return ret;
-			}
 			break;
 		case RTE_FLOW_ITEM_TYPE_UDP:
 			ret = mlx5_flow_validate_item_udp(items, item_flags,
@@ -2205,12 +2061,12 @@  struct pedit_parser {
 				 error);
 			if (!mask.udp)
 				return -rte_errno;
-			if (action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) {
-				ret = flow_tcf_validate_vxlan_decap_udp
-								(items, error);
-				if (ret < 0)
-					return ret;
-			}
+			/*
+			 * Save the presumed outer UDP item for extra check
+			 * if the tunnel item will be found later in the list.
+			 */
+			if (!(item_flags & MLX5_FLOW_LAYER_TUNNEL))
+				outer_udp = items;
 			break;
 		case RTE_FLOW_ITEM_TYPE_TCP:
 			ret = mlx5_flow_validate_item_tcp
@@ -2259,6 +2115,45 @@  struct pedit_parser {
 					 mask.vxlan,
 					 "no support for partial or "
 					 "empty mask on \"vxlan.vni\" field");
+			/*
+			 * The VNI item assumes the VXLAN tunnel, it requires
+			 * at least the outer destination UDP port must be
+			 * specified without wildcards to allow kernel select
+			 * the virtual VXLAN device by port. Also outer IPv4
+			 * or IPv6 item must be specified (wilcards or even
+			 * zero mask are allowed) to let driver know the tunnel
+			 * IP version and process UDP traffic correctly.
+			 */
+			if (!(item_flags &
+			     (MLX5_FLOW_LAYER_OUTER_L3_IPV4 |
+			      MLX5_FLOW_LAYER_OUTER_L3_IPV6)))
+				return rte_flow_error_set
+						 (error, EINVAL,
+						  RTE_FLOW_ERROR_TYPE_ACTION,
+						  NULL,
+						  "no outer IP pattern found"
+						  " for vxlan tunnel");
+			if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+				return rte_flow_error_set
+						 (error, EINVAL,
+						  RTE_FLOW_ERROR_TYPE_ACTION,
+						  NULL,
+						  "no outer UDP pattern found"
+						  " for vxlan tunnel");
+			/*
+			 * All items preceding the tunnel item become outer
+			 * ones and we should do extra validation for them
+			 * due to tc limitations for tunnel outer parameters.
+			 * Currently only outer UDP item requres extra check,
+			 * use the saved pointer instead of item list rescan.
+			 */
+			assert(outer_udp);
+			ret = flow_tcf_validate_vxlan_decap_udp
+						(outer_udp, error);
+			if (ret < 0)
+				return ret;
+			/* Reset L4 protocol for inner parameters. */
+			next_protocol = 0xff;
 			break;
 		default:
 			return rte_flow_error_set(error, ENOTSUP,
@@ -2361,28 +2256,20 @@  struct pedit_parser {
 						  "no ethernet found in"
 						  " pattern");
 	}
-	if (action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) {
-		if (!(item_flags &
-		     (MLX5_FLOW_LAYER_OUTER_L3_IPV4 |
-		      MLX5_FLOW_LAYER_OUTER_L3_IPV6)))
-			return rte_flow_error_set(error, EINVAL,
-						  RTE_FLOW_ERROR_TYPE_ACTION,
-						  NULL,
-						  "no outer IP pattern found"
-						  " for vxlan decap action");
-		if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
-			return rte_flow_error_set(error, EINVAL,
-						  RTE_FLOW_ERROR_TYPE_ACTION,
-						  NULL,
-						  "no outer UDP pattern found"
-						  " for vxlan decap action");
-		if (!(item_flags & MLX5_FLOW_LAYER_VXLAN))
-			return rte_flow_error_set(error, EINVAL,
-						  RTE_FLOW_ERROR_TYPE_ACTION,
-						  NULL,
-						  "no VNI pattern found"
-						  " for vxlan decap action");
-	}
+	if ((action_flags & MLX5_FLOW_ACTION_VXLAN_DECAP) &&
+	    !(item_flags & MLX5_FLOW_LAYER_VXLAN))
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ACTION,
+					  NULL,
+					  "no VNI pattern found"
+					  " for vxlan decap action");
+	if ((action_flags & MLX5_FLOW_ACTION_VXLAN_ENCAP) &&
+	    (item_flags & MLX5_FLOW_LAYER_TUNNEL))
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ACTION,
+					  NULL,
+					  "vxlan encap not supported"
+					  " for tunneled traffic");
 	return 0;
 }