[dpdk-dev,04/29] ixgbe/base: add mac link setup for x550a SFP
Commit Message
This patch adds ixgbe_setup_mac_link_sfp_x550a for x550a SFP.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
---
drivers/net/ixgbe/base/ixgbe_type.h | 4 +++
drivers/net/ixgbe/base/ixgbe_x550.c | 64 ++++++++++++++++++++++++++++++++++++-
drivers/net/ixgbe/base/ixgbe_x550.h | 3 ++
3 files changed, 70 insertions(+), 1 deletion(-)
@@ -4062,6 +4062,7 @@ struct ixgbe_hw {
#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P) ((P) ? 0x8010 : 0x4010)
#define IXGBE_KRM_LINK_CTRL_1(P) ((P) ? 0x820C : 0x420C)
#define IXGBE_KRM_AN_CNTL_1(P) ((P) ? 0x822C : 0x422C)
+#define IXGBE_KRM_AN_CNTL_8(P) ((P) ? 0x8248 : 0x4248)
#define IXGBE_KRM_SGMII_CTRL(P) ((P) ? 0x82A0 : 0x42A0)
#define IXGBE_KRM_DSP_TXFFE_STATE_4(P) ((P) ? 0x8634 : 0x4634)
#define IXGBE_KRM_DSP_TXFFE_STATE_5(P) ((P) ? 0x8638 : 0x4638)
@@ -4090,6 +4091,9 @@ struct ixgbe_hw {
#define IXGBE_KRM_AN_CNTL_1_SYM_PAUSE (1 << 28)
#define IXGBE_KRM_AN_CNTL_1_ASM_PAUSE (1 << 29)
+#define IXGBE_KRM_AN_CNTL_8_LINEAR (1 << 0)
+#define IXGBE_KRM_AN_CNTL_8_LIMITING (1 << 1)
+
#define IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D (1 << 12)
#define IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D (1 << 19)
@@ -1488,9 +1488,14 @@ void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
mac->ops.enable_tx_laser = NULL;
mac->ops.flap_tx_laser = NULL;
mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
- mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_x550em;
mac->ops.set_rate_select_speed =
ixgbe_set_soft_rate_select_speed;
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP_N)
+ mac->ops.setup_mac_link =
+ ixgbe_setup_mac_link_sfp_x550a;
+ else
+ mac->ops.setup_mac_link =
+ ixgbe_setup_mac_link_sfp_x550em;
break;
case ixgbe_media_type_copper:
mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
@@ -2128,6 +2133,63 @@ s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
}
/**
+ * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP
+ * @hw: pointer to hardware structure
+ *
+ * Configure the the integrated PHY for SFP support.
+ **/
+s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ s32 ret_val;
+ u32 reg_val;
+ bool setup_linear = false;
+
+ UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
+
+ /* Check if SFP module is supported and linear */
+ ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
+
+ /* If no SFP module present, then return success. Return success since
+ * SFP not present error is not excepted in the setup MAC link flow.
+ */
+ if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT)
+ return IXGBE_SUCCESS;
+
+ if (ret_val != IXGBE_SUCCESS)
+ return ret_val;
+
+ /* Configure internal PHY for native SFI */
+ ret_val = hw->mac.ops.read_iosf_sb_reg(hw,
+ IXGBE_KRM_AN_CNTL_8(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
+
+ if (ret_val != IXGBE_SUCCESS)
+ return ret_val;
+
+ if (setup_linear) {
+ reg_val &= ~IXGBE_KRM_AN_CNTL_8_LIMITING;
+ reg_val |= IXGBE_KRM_AN_CNTL_8_LINEAR;
+ } else {
+ reg_val |= IXGBE_KRM_AN_CNTL_8_LIMITING;
+ reg_val &= ~IXGBE_KRM_AN_CNTL_8_LINEAR;
+ }
+
+ ret_val = hw->mac.ops.write_iosf_sb_reg(hw,
+ IXGBE_KRM_AN_CNTL_8(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+ if (ret_val != IXGBE_SUCCESS)
+ return ret_val;
+
+ /* Setup XFI/SFI internal link. */
+ ret_val = ixgbe_setup_ixfi_x550em(hw, &speed);
+
+ return ret_val;
+}
+
+/**
* ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration
* @hw: pointer to hardware structure
*
@@ -100,6 +100,9 @@ s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw);
s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg_wait_to_complete);
+s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete);
s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw);
s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
ixgbe_link_speed speed,