[dpdk-dev,v1,08/11] igb: fix rx intr compatible issue with PF mbox
Commit Message
When igb runs as a PF, mbox interrupt is prerequisite to make VF start normally.
And PF sometimes won't 'dev_start', so the mbox interrupt register during 'dev_init' is required.
The patch rolls back the interrupt register for mbox,lsc to the 'dev_init'.
As UIO doesn't support multiple vector, mbox has to occupy the only one.
It adds condition check on 'dev_start', rxq interrupt is not allowed when PF running in IOV mode via UIO.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
---
drivers/net/e1000/igb_ethdev.c | 44 +++++++++++++++++++++++++++++-------------
1 file changed, 31 insertions(+), 13 deletions(-)
@@ -651,6 +651,13 @@ eth_igb_dev_init(struct rte_eth_dev *eth_dev)
eth_dev->data->port_id, pci_dev->id.vendor_id,
pci_dev->id.device_id);
+ rte_intr_callback_register(&(pci_dev->intr_handle),
+ eth_igb_interrupt_handler,
+ (void *)eth_dev);
+
+ /* enable uio/vfio intr/eventfd mapping */
+ rte_intr_enable(&(pci_dev->intr_handle));
+
/* enable support intr */
igb_intr_enable(eth_dev);
@@ -929,13 +936,16 @@ eth_igb_start(struct rte_eth_dev *dev)
igb_pf_host_configure(dev);
/* check and configure queue intr-vector mapping */
- if (dev->data->dev_conf.intr_conf.rxq != 0)
+ if (((RTE_ETH_DEV_SRIOV(dev).active &&
+ rte_intr_cap_multiple(intr_handle)) ||
+ !RTE_ETH_DEV_SRIOV(dev).active) &&
+ dev->data->dev_conf.intr_conf.rxq != 0) {
intr_vector = dev->data->nb_rx_queues;
+ if (rte_intr_efd_enable(intr_handle, intr_vector))
+ return -1;
+ }
- if (rte_intr_efd_enable(intr_handle, intr_vector))
- return -1;
-
- if (rte_intr_dp_is_en(intr_handle)) {
+ if (rte_intr_dp_is_en(intr_handle) && !intr_handle->intr_vec) {
intr_handle->intr_vec =
rte_zmalloc("intr_vec",
dev->data->nb_rx_queues * sizeof(int), 0);
@@ -1028,20 +1038,22 @@ eth_igb_start(struct rte_eth_dev *dev)
}
e1000_setup_link(hw);
- /* check if lsc interrupt feature is enabled */
- if (dev->data->dev_conf.intr_conf.lsc != 0) {
- if (rte_intr_allow_others(intr_handle)) {
- rte_intr_callback_register(intr_handle,
- eth_igb_interrupt_handler,
- (void *)dev);
+ if (rte_intr_allow_others(intr_handle)) {
+ /* check if lsc interrupt is enabled */
+ if (dev->data->dev_conf.intr_conf.lsc != 0)
eth_igb_lsc_interrupt_setup(dev);
- } else
+ } else {
+ rte_intr_callback_unregister(intr_handle,
+ eth_igb_interrupt_handler,
+ (void *)dev);
+ if (dev->data->dev_conf.intr_conf.lsc != 0)
PMD_INIT_LOG(INFO, "lsc won't enable because of"
" no intr multiplex\n");
}
/* check if rxq interrupt is enabled */
- if (dev->data->dev_conf.intr_conf.rxq != 0)
+ if (dev->data->dev_conf.intr_conf.rxq != 0 &&
+ rte_intr_dp_is_en(intr_handle))
eth_igb_rxq_interrupt_setup(dev);
/* enable uio/vfio intr/eventfd mapping */
@@ -1134,6 +1146,12 @@ eth_igb_stop(struct rte_eth_dev *dev)
}
filter_info->twotuple_mask = 0;
+ if (!rte_intr_allow_others(intr_handle))
+ /* resume to the default handler */
+ rte_intr_callback_register(intr_handle,
+ eth_igb_interrupt_handler,
+ (void *)dev);
+
/* Clean datapath event and queue/vec mapping */
rte_intr_efd_disable(intr_handle);
if (intr_handle->intr_vec != NULL) {