[dpdk-dev,v1,03/11] igb: reserve intr vector zero for misc cause
Commit Message
According to the VFIO interrupt mapping, the interrupt vector id for rxq starts from RX_VEC_START.
It doesn't impact the UIO cases.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
---
drivers/net/e1000/igb_ethdev.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
@@ -4210,7 +4210,10 @@ eth_igb_configure_msix_intr(struct rte_eth_dev *dev)
uint32_t tmpval, regval, intr_mask;
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- uint32_t vec = 0;
+ uint32_t vec = MISC_VEC_ID;
+ uint32_t base = MISC_VEC_ID;
+ uint32_t misc_shift = 0;
+
struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
/* won't configure msix register if no mapping is done
@@ -4219,6 +4222,11 @@ eth_igb_configure_msix_intr(struct rte_eth_dev *dev)
if (!rte_intr_dp_is_en(intr_handle))
return;
+ if (rte_intr_allow_others(intr_handle)) {
+ vec = base = RX_VEC_START;
+ misc_shift = 1;
+ }
+
/* set interrupt vector for other causes */
if (hw->mac.type == e1000_82575) {
tmpval = E1000_READ_REG(hw, E1000_CTRL_EXT);
@@ -4247,8 +4255,8 @@ eth_igb_configure_msix_intr(struct rte_eth_dev *dev)
E1000_WRITE_REG(hw, E1000_GPIE, E1000_GPIE_MSIX_MODE |
E1000_GPIE_PBA | E1000_GPIE_EIAME |
E1000_GPIE_NSICR);
-
- intr_mask = (1 << intr_handle->max_intr) - 1;
+ intr_mask = RTE_LEN2MASK(intr_handle->nb_efd, uint32_t) <<
+ misc_shift;
regval = E1000_READ_REG(hw, E1000_EIAC);
E1000_WRITE_REG(hw, E1000_EIAC, regval | intr_mask);
@@ -4262,14 +4270,15 @@ eth_igb_configure_msix_intr(struct rte_eth_dev *dev)
/* use EIAM to auto-mask when MSI-X interrupt
* is asserted, this saves a register write for every interrupt
*/
- intr_mask = (1 << intr_handle->nb_efd) - 1;
+ intr_mask = RTE_LEN2MASK(intr_handle->nb_efd, uint32_t) <<
+ misc_shift;
regval = E1000_READ_REG(hw, E1000_EIAM);
E1000_WRITE_REG(hw, E1000_EIAM, regval | intr_mask);
for (queue_id = 0; queue_id < dev->data->nb_rx_queues; queue_id++) {
eth_igb_assign_msix_vector(hw, 0, queue_id, vec);
intr_handle->intr_vec[queue_id] = vec;
- if (vec < intr_handle->nb_efd - 1)
+ if (vec < base + intr_handle->nb_efd - 1)
vec++;
}