[dpdk-dev,v2,12/15] eal: Consolidate pci_map/unmap_device() of linuxapp and bsdapp
Commit Message
The patch consolidates below functions, and implemented in common
eal code.
- pci_map_device()
- pci_unmap_device()
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
---
lib/librte_eal/bsdapp/eal/eal_pci.c | 12 +++----
lib/librte_eal/common/eal_common_pci.c | 57 +++++++++++++++++++++++++++++++++
lib/librte_eal/common/eal_private.h | 4 +--
lib/librte_eal/common/include/rte_pci.h | 1 +
lib/librte_eal/linuxapp/eal/eal_pci.c | 55 -------------------------------
lib/librte_ether/rte_ethdev.c | 1 +
6 files changed, 65 insertions(+), 65 deletions(-)
Comments
> -----Original Message-----
> From: Tetsuya Mukawa [mailto:mukawa@igel.co.jp]
> Sent: Thursday, March 12, 2015 10:18 AM
> To: dev@dpdk.org
> Cc: Iremonger, Bernard; Richardson, Bruce; Tetsuya Mukawa
> Subject: [PATCH v2 12/15] eal: Consolidate pci_map/unmap_device() of linuxapp and bsdapp
>
> The patch consolidates below functions, and implemented in common eal code.
> - pci_map_device()
> - pci_unmap_device()
>
> Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
> ---
> lib/librte_eal/bsdapp/eal/eal_pci.c | 12 +++----
> lib/librte_eal/common/eal_common_pci.c | 57 +++++++++++++++++++++++++++++++++
> lib/librte_eal/common/eal_private.h | 4 +--
> lib/librte_eal/common/include/rte_pci.h | 1 +
> lib/librte_eal/linuxapp/eal/eal_pci.c | 55 -------------------------------
> lib/librte_ether/rte_ethdev.c | 1 +
> 6 files changed, 65 insertions(+), 65 deletions(-)
>
> diff --git a/lib/librte_eal/bsdapp/eal/eal_pci.c b/lib/librte_eal/bsdapp/eal/eal_pci.c
> index 3778763..1e42e42 100644
> --- a/lib/librte_eal/bsdapp/eal/eal_pci.c
> +++ b/lib/librte_eal/bsdapp/eal/eal_pci.c
> @@ -280,7 +280,7 @@ fail:
> }
>
> /* map the PCI resource of a PCI device in virtual memory */ -static int
> +int
> pci_uio_map_resource(struct rte_pci_device *dev) {
> int i, map_idx, ret;
> @@ -364,6 +364,9 @@ pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
> /* FreeBSD has no NUMA support (yet) */
> dev->numa_node = 0;
>
> + /* FreeBSD has only one pass through driver */
> + dev->pt_driver = RTE_PT_NIC_UIO;
> +
> /* parse resources */
> switch (conf->pc_hdr & PCIM_HDRTYPE) {
> case PCIM_HDRTYPE_NORMAL:
> @@ -429,13 +432,6 @@ skipdev:
> return 0;
> }
>
> -/* Map pci device */
> -int
> -pci_map_device(struct rte_pci_device *dev) -{
> - return pci_uio_map_resource(dev);
> -}
> -
> /*
> * Scan the content of the PCI bus, and add the devices in the devices
> * list. Call pci_scan_one() for each pci entry found.
> diff --git a/lib/librte_eal/common/eal_common_pci.c b/lib/librte_eal/common/eal_common_pci.c
> index 538b2d9..726026f 100644
> --- a/lib/librte_eal/common/eal_common_pci.c
> +++ b/lib/librte_eal/common/eal_common_pci.c
> @@ -98,6 +98,63 @@ static struct rte_devargs *pci_devargs_lookup(struct rte_pci_device *dev)
> return NULL;
> }
>
> +/* Map pci device */
> +static int
> +pci_map_device(struct rte_pci_device *dev) {
> + int ret = -1;
> +
> + /* try mapping the NIC resources using VFIO if it exists */
> + switch (dev->pt_driver) {
> + case RTE_PT_VFIO:
> +#ifdef VFIO_PRESENT
> + if (pci_vfio_is_enabled())
> + ret = pci_vfio_map_resource(dev);
> +#endif
> + break;
> + case RTE_PT_IGB_UIO:
> + case RTE_PT_UIO_GENERIC:
> + case RTE_PT_NIC_UIO:
> + /* map resources for devices that use uio */
> + ret = pci_uio_map_resource(dev);
> + break;
> + default:
> + RTE_LOG(DEBUG, EAL, " Not managed by known pt driver,"
> + " skipped\n");
> + ret = 1;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +#ifdef RTE_LIBRTE_EAL_HOTPLUG
Hi Tetsuya,
Can #ifdef RTE_LIBRTE_EAL_HOTPLUG be removed as code is now in eal_common_pci.c ?
Regards,
Bernard.
> +/* Unmap pci device */
> +static void
> +pci_unmap_device(struct rte_pci_device *dev) {
> + if (dev == NULL)
> + return;
> +
> + /* try unmapping the NIC resources using VFIO if it exists */
> + switch (dev->pt_driver) {
> + case RTE_PT_VFIO:
> + RTE_LOG(ERR, EAL, "Hotplug doesn't support vfio yet\n");
> + break;
> + case RTE_PT_IGB_UIO:
> + case RTE_PT_UIO_GENERIC:
> + case RTE_PT_NIC_UIO:
> + /* unmap resources for devices that use uio */
> + pci_uio_unmap_resource(dev);
> + break;
> + default:
> + RTE_LOG(DEBUG, EAL, " Not managed by known pt driver,"
> + " skipped\n");
> + break;
> + }
> +}
> +#endif /* RTE_LIBRTE_EAL_HOTPLUG */
Hi Tetsuya,
Can #endif be removed too as code is now in eal_common_pci.c ?
Regards,
Bernard.
> +
> /*
> * If vendor/device ID match, call the devinit() function of the
> * driver.
> diff --git a/lib/librte_eal/common/eal_private.h b/lib/librte_eal/common/eal_private.h
> index fe2c596..badb55c 100644
> --- a/lib/librte_eal/common/eal_private.h
> +++ b/lib/librte_eal/common/eal_private.h
> @@ -171,14 +171,14 @@ int pci_unbind_kernel_driver(struct rte_pci_device *dev);
> * @return
> * 0 on success, negative on error
> */
> -int pci_map_device(struct rte_pci_device *dev);
> +int pci_uio_map_resource(struct rte_pci_device *dev);
>
> /**
> * Unmap this device
> *
> * This function is private to EAL.
> */
> -void pci_unmap_device(struct rte_pci_device *dev);
> +void pci_uio_unmap_resource(struct rte_pci_device *dev);
>
> /**
> * Init tail queues for non-EAL library structures. This is to allow diff --git
> a/lib/librte_eal/common/include/rte_pci.h b/lib/librte_eal/common/include/rte_pci.h
> index fc64601..47345b8 100644
> --- a/lib/librte_eal/common/include/rte_pci.h
> +++ b/lib/librte_eal/common/include/rte_pci.h
> @@ -147,6 +147,7 @@ enum rte_pt_driver {
> RTE_PT_IGB_UIO = 1,
> RTE_PT_VFIO = 2,
> RTE_PT_UIO_GENERIC = 3,
> + RTE_PT_NIC_UIO = 4,
> };
>
> /**
> diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
> index dbc2548..6a8153c 100644
> --- a/lib/librte_eal/linuxapp/eal/eal_pci.c
> +++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
> @@ -565,61 +565,6 @@ pci_config_space_set(struct rte_pci_device *dev) } #endif
>
> -/* Map pci device */
> -int
> -pci_map_device(struct rte_pci_device *dev) -{
> - int ret = -1;
> -
> - /* try mapping the NIC resources using VFIO if it exists */
> - switch (dev->pt_driver) {
> - case RTE_PT_VFIO:
> -#ifdef VFIO_PRESENT
> - if (pci_vfio_is_enabled())
> - ret = pci_vfio_map_resource(dev);
> -#endif
> - break;
> - case RTE_PT_IGB_UIO:
> - case RTE_PT_UIO_GENERIC:
> - /* map resources for devices that use uio */
> - ret = pci_uio_map_resource(dev);
> - break;
> - default:
> - RTE_LOG(DEBUG, EAL, " Not managed by known pt driver,"
> - " skipped\n");
> - ret = 1;
> - break;
> - }
> -
> - return ret;
> -}
> -
> -#ifdef RTE_LIBRTE_EAL_HOTPLUG
> -/* Unmap pci device */
> -void
> -pci_unmap_device(struct rte_pci_device *dev) -{
> - if (dev == NULL)
> - return;
> -
> - /* try unmapping the NIC resources using VFIO if it exists */
> - switch (dev->pt_driver) {
> - case RTE_PT_VFIO:
> - RTE_LOG(ERR, EAL, "Hotplug doesn't support vfio yet\n");
> - break;
> - case RTE_PT_IGB_UIO:
> - case RTE_PT_UIO_GENERIC:
> - /* unmap resources for devices that use uio */
> - pci_uio_unmap_resource(dev);
> - break;
> - default:
> - RTE_LOG(DEBUG, EAL, " Not managed by known pt driver,"
> - " skipped\n");
> - break;
> - }
> -}
> -#endif /* RTE_LIBRTE_EAL_HOTPLUG */
> -
> /* Init the PCI EAL subsystem */
> int
> rte_eal_pci_init(void)
> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c index 03fce08..e23d7da
> 100644
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -515,6 +515,7 @@ rte_eth_dev_is_detachable(uint8_t port_id)
> switch (rte_eth_devices[port_id].pci_dev->pt_driver) {
> case RTE_PT_IGB_UIO:
> case RTE_PT_UIO_GENERIC:
> + case RTE_PT_NIC_UIO:
> break;
> case RTE_PT_VFIO:
> default:
> --
> 1.9.1
@@ -280,7 +280,7 @@ fail:
}
/* map the PCI resource of a PCI device in virtual memory */
-static int
+int
pci_uio_map_resource(struct rte_pci_device *dev)
{
int i, map_idx, ret;
@@ -364,6 +364,9 @@ pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
/* FreeBSD has no NUMA support (yet) */
dev->numa_node = 0;
+ /* FreeBSD has only one pass through driver */
+ dev->pt_driver = RTE_PT_NIC_UIO;
+
/* parse resources */
switch (conf->pc_hdr & PCIM_HDRTYPE) {
case PCIM_HDRTYPE_NORMAL:
@@ -429,13 +432,6 @@ skipdev:
return 0;
}
-/* Map pci device */
-int
-pci_map_device(struct rte_pci_device *dev)
-{
- return pci_uio_map_resource(dev);
-}
-
/*
* Scan the content of the PCI bus, and add the devices in the devices
* list. Call pci_scan_one() for each pci entry found.
@@ -98,6 +98,63 @@ static struct rte_devargs *pci_devargs_lookup(struct rte_pci_device *dev)
return NULL;
}
+/* Map pci device */
+static int
+pci_map_device(struct rte_pci_device *dev)
+{
+ int ret = -1;
+
+ /* try mapping the NIC resources using VFIO if it exists */
+ switch (dev->pt_driver) {
+ case RTE_PT_VFIO:
+#ifdef VFIO_PRESENT
+ if (pci_vfio_is_enabled())
+ ret = pci_vfio_map_resource(dev);
+#endif
+ break;
+ case RTE_PT_IGB_UIO:
+ case RTE_PT_UIO_GENERIC:
+ case RTE_PT_NIC_UIO:
+ /* map resources for devices that use uio */
+ ret = pci_uio_map_resource(dev);
+ break;
+ default:
+ RTE_LOG(DEBUG, EAL, " Not managed by known pt driver,"
+ " skipped\n");
+ ret = 1;
+ break;
+ }
+
+ return ret;
+}
+
+#ifdef RTE_LIBRTE_EAL_HOTPLUG
+/* Unmap pci device */
+static void
+pci_unmap_device(struct rte_pci_device *dev)
+{
+ if (dev == NULL)
+ return;
+
+ /* try unmapping the NIC resources using VFIO if it exists */
+ switch (dev->pt_driver) {
+ case RTE_PT_VFIO:
+ RTE_LOG(ERR, EAL, "Hotplug doesn't support vfio yet\n");
+ break;
+ case RTE_PT_IGB_UIO:
+ case RTE_PT_UIO_GENERIC:
+ case RTE_PT_NIC_UIO:
+ /* unmap resources for devices that use uio */
+ pci_uio_unmap_resource(dev);
+ break;
+ default:
+ RTE_LOG(DEBUG, EAL, " Not managed by known pt driver,"
+ " skipped\n");
+ break;
+ }
+}
+#endif /* RTE_LIBRTE_EAL_HOTPLUG */
+
/*
* If vendor/device ID match, call the devinit() function of the
* driver.
@@ -171,14 +171,14 @@ int pci_unbind_kernel_driver(struct rte_pci_device *dev);
* @return
* 0 on success, negative on error
*/
-int pci_map_device(struct rte_pci_device *dev);
+int pci_uio_map_resource(struct rte_pci_device *dev);
/**
* Unmap this device
*
* This function is private to EAL.
*/
-void pci_unmap_device(struct rte_pci_device *dev);
+void pci_uio_unmap_resource(struct rte_pci_device *dev);
/**
* Init tail queues for non-EAL library structures. This is to allow
@@ -147,6 +147,7 @@ enum rte_pt_driver {
RTE_PT_IGB_UIO = 1,
RTE_PT_VFIO = 2,
RTE_PT_UIO_GENERIC = 3,
+ RTE_PT_NIC_UIO = 4,
};
/**
@@ -565,61 +565,6 @@ pci_config_space_set(struct rte_pci_device *dev)
}
#endif
-/* Map pci device */
-int
-pci_map_device(struct rte_pci_device *dev)
-{
- int ret = -1;
-
- /* try mapping the NIC resources using VFIO if it exists */
- switch (dev->pt_driver) {
- case RTE_PT_VFIO:
-#ifdef VFIO_PRESENT
- if (pci_vfio_is_enabled())
- ret = pci_vfio_map_resource(dev);
-#endif
- break;
- case RTE_PT_IGB_UIO:
- case RTE_PT_UIO_GENERIC:
- /* map resources for devices that use uio */
- ret = pci_uio_map_resource(dev);
- break;
- default:
- RTE_LOG(DEBUG, EAL, " Not managed by known pt driver,"
- " skipped\n");
- ret = 1;
- break;
- }
-
- return ret;
-}
-
-#ifdef RTE_LIBRTE_EAL_HOTPLUG
-/* Unmap pci device */
-void
-pci_unmap_device(struct rte_pci_device *dev)
-{
- if (dev == NULL)
- return;
-
- /* try unmapping the NIC resources using VFIO if it exists */
- switch (dev->pt_driver) {
- case RTE_PT_VFIO:
- RTE_LOG(ERR, EAL, "Hotplug doesn't support vfio yet\n");
- break;
- case RTE_PT_IGB_UIO:
- case RTE_PT_UIO_GENERIC:
- /* unmap resources for devices that use uio */
- pci_uio_unmap_resource(dev);
- break;
- default:
- RTE_LOG(DEBUG, EAL, " Not managed by known pt driver,"
- " skipped\n");
- break;
- }
-}
-#endif /* RTE_LIBRTE_EAL_HOTPLUG */
-
/* Init the PCI EAL subsystem */
int
rte_eal_pci_init(void)
@@ -515,6 +515,7 @@ rte_eth_dev_is_detachable(uint8_t port_id)
switch (rte_eth_devices[port_id].pci_dev->pt_driver) {
case RTE_PT_IGB_UIO:
case RTE_PT_UIO_GENERIC:
+ case RTE_PT_NIC_UIO:
break;
case RTE_PT_VFIO:
default: