[v6,00/21] add support for cpfl PMD in DPDK

  The patchset introduced the cpfl (Control Plane Function Library) PMD
for Intel® IPU E2100’s Configure Physical Function (Device ID: 0x1453)

The cpfl PMD inherits all the features from idpf PMD which will follow
an ongoing standard data plan function spec
https://www.oasis-open.org/committees/tc_home.php?wg_abbrev=idpf
Besides, it will also support more device specific hardware offloading
features from DPDK’s control path (e.g.: hairpin, rte_flow …). which is
different from idpf PMD, and that's why we need a new cpfl PMD.

This patchset mainly focuses on idpf PMD’s equivalent features.
To avoid duplicated code, the patchset depends on below patchsets which
move the common part from net/idpf into common/idpf as a shared library.

v2 changes:
 - rebase to the new baseline.
 - Fix rss lut config issue.
v3 changes:
 - rebase to the new baseline.
v4 changes:
 - Resend v3. No code changed.
v5 changes:
 - rebase to the new baseline.
 - optimize some code
 - give "not supported" tips when user want to config rss hash type
 - if stats reset fails at initialization time, don't rollback, just
   print ERROR info
v6 changes:
 - for small fixed size structure, change rte_memcpy to memcpy()
 - fix compilation for AVX512DQ
 - update cpfl maintainers

Mingxia Liu (21):
  net/cpfl: support device initialization
  net/cpfl: add Tx queue setup
  net/cpfl: add Rx queue setup
  net/cpfl: support device start and stop
  net/cpfl: support queue start
  net/cpfl: support queue stop
  net/cpfl: support queue release
  net/cpfl: support MTU configuration
  net/cpfl: support basic Rx data path
  net/cpfl: support basic Tx data path
  net/cpfl: support write back based on ITR expire
  net/cpfl: support RSS
  net/cpfl: support Rx offloading
  net/cpfl: support Tx offloading
  net/cpfl: add AVX512 data path for single queue model
  net/cpfl: support timestamp offload
  net/cpfl: add AVX512 data path for split queue model
  net/cpfl: add HW statistics
  net/cpfl: add RSS set/get ops
  net/cpfl: support scalar scatter Rx datapath for single queue model
  net/cpfl: add xstats ops

 MAINTAINERS                             |    8 +
 doc/guides/nics/cpfl.rst                |   88 ++
 doc/guides/nics/features/cpfl.ini       |   17 +
 doc/guides/rel_notes/release_23_03.rst  |    6 +
 drivers/net/cpfl/cpfl_ethdev.c          | 1453 +++++++++++++++++++++++
 drivers/net/cpfl/cpfl_ethdev.h          |   95 ++
 drivers/net/cpfl/cpfl_logs.h            |   32 +
 drivers/net/cpfl/cpfl_rxtx.c            |  952 +++++++++++++++
 drivers/net/cpfl/cpfl_rxtx.h            |   44 +
 drivers/net/cpfl/cpfl_rxtx_vec_common.h |  116 ++
 drivers/net/cpfl/meson.build            |   40 +
 drivers/net/meson.build                 |    1 +
 12 files changed, 2852 insertions(+)
 create mode 100644 doc/guides/nics/cpfl.rst
 create mode 100644 doc/guides/nics/features/cpfl.ini
 create mode 100644 drivers/net/cpfl/cpfl_ethdev.c
 create mode 100644 drivers/net/cpfl/cpfl_ethdev.h
 create mode 100644 drivers/net/cpfl/cpfl_logs.h
 create mode 100644 drivers/net/cpfl/cpfl_rxtx.c
 create mode 100644 drivers/net/cpfl/cpfl_rxtx.h
 create mode 100644 drivers/net/cpfl/cpfl_rxtx_vec_common.h
 create mode 100644 drivers/net/cpfl/meson.build
  

On 2/13/2023 2:19 AM, Mingxia Liu wrote:
> The patchset introduced the cpfl (Control Plane Function Library) PMD
> for Intel® IPU E2100’s Configure Physical Function (Device ID: 0x1453)
> 
> The cpfl PMD inherits all the features from idpf PMD which will follow
> an ongoing standard data plan function spec
> https://www.oasis-open.org/committees/tc_home.php?wg_abbrev=idpf
> Besides, it will also support more device specific hardware offloading
> features from DPDK’s control path (e.g.: hairpin, rte_flow …). which is
> different from idpf PMD, and that's why we need a new cpfl PMD.
> 
> This patchset mainly focuses on idpf PMD’s equivalent features.
> To avoid duplicated code, the patchset depends on below patchsets which
> move the common part from net/idpf into common/idpf as a shared library.
> 
> v2 changes:
>  - rebase to the new baseline.
>  - Fix rss lut config issue.
> v3 changes:
>  - rebase to the new baseline.
> v4 changes:
>  - Resend v3. No code changed.
> v5 changes:
>  - rebase to the new baseline.
>  - optimize some code
>  - give "not supported" tips when user want to config rss hash type
>  - if stats reset fails at initialization time, don't rollback, just
>    print ERROR info
> v6 changes:
>  - for small fixed size structure, change rte_memcpy to memcpy()
>  - fix compilation for AVX512DQ
>  - update cpfl maintainers
> 
> Mingxia Liu (21):
>   net/cpfl: support device initialization
>   net/cpfl: add Tx queue setup
>   net/cpfl: add Rx queue setup
>   net/cpfl: support device start and stop
>   net/cpfl: support queue start
>   net/cpfl: support queue stop
>   net/cpfl: support queue release
>   net/cpfl: support MTU configuration
>   net/cpfl: support basic Rx data path
>   net/cpfl: support basic Tx data path
>   net/cpfl: support write back based on ITR expire
>   net/cpfl: support RSS
>   net/cpfl: support Rx offloading
>   net/cpfl: support Tx offloading
>   net/cpfl: add AVX512 data path for single queue model
>   net/cpfl: support timestamp offload
>   net/cpfl: add AVX512 data path for split queue model
>   net/cpfl: add HW statistics
>   net/cpfl: add RSS set/get ops
>   net/cpfl: support scalar scatter Rx datapath for single queue model
>   net/cpfl: add xstats ops

Hi Mingxia, Beilei,

Is there any missing dependency at this point?
  

Yes, this patchset is based on the idpf PMD code:
http://patches.dpdk.org/project/dpdk/cover/20230206054618.40975-1-beilei.xing@intel.com/
http://patches.dpdk.org/project/dpdk/cover/20230106090501.9106-1-beilei.xing@intel.com/
http://patches.dpdk.org/project/dpdk/cover/20230207084549.2225214-1-wenjun1.wu@intel.com/
http://patches.dpdk.org/project/dpdk/cover/20230208073401.2468579-1-mingxia.liu@intel.com/

But as these dependency have been merged to networking.dataplane.dpdk.next-net-intel, 
so I delete the  dependency description.

If necessary , I'll send a new version.

BR
mingxia
> -----Original Message-----
> From: Ferruh Yigit <ferruh.yigit@amd.com>
> Sent: Wednesday, February 15, 2023 10:05 PM
> To: Liu, Mingxia <mingxia.liu@intel.com>; dev@dpdk.org; Xing, Beilei
> <beilei.xing@intel.com>; Zhang, Yuying <yuying.zhang@intel.com>
> Subject: Re: [PATCH v6 00/21] add support for cpfl PMD in DPDK
> 
> On 2/13/2023 2:19 AM, Mingxia Liu wrote:
> > The patchset introduced the cpfl (Control Plane Function Library) PMD
> > for Intel® IPU E2100’s Configure Physical Function (Device ID: 0x1453)
> >
> > The cpfl PMD inherits all the features from idpf PMD which will follow
> > an ongoing standard data plan function spec
> > https://www.oasis-open.org/committees/tc_home.php?wg_abbrev=idpf
> > Besides, it will also support more device specific hardware offloading
> > features from DPDK’s control path (e.g.: hairpin, rte_flow …). which
> > is different from idpf PMD, and that's why we need a new cpfl PMD.
> >
> > This patchset mainly focuses on idpf PMD’s equivalent features.
> > To avoid duplicated code, the patchset depends on below patchsets
> > which move the common part from net/idpf into common/idpf as a shared
> library.
> >
> > v2 changes:
> >  - rebase to the new baseline.
> >  - Fix rss lut config issue.
> > v3 changes:
> >  - rebase to the new baseline.
> > v4 changes:
> >  - Resend v3. No code changed.
> > v5 changes:
> >  - rebase to the new baseline.
> >  - optimize some code
> >  - give "not supported" tips when user want to config rss hash type
> >  - if stats reset fails at initialization time, don't rollback, just
> >    print ERROR info
> > v6 changes:
> >  - for small fixed size structure, change rte_memcpy to memcpy()
> >  - fix compilation for AVX512DQ
> >  - update cpfl maintainers
> >
> > Mingxia Liu (21):
> >   net/cpfl: support device initialization
> >   net/cpfl: add Tx queue setup
> >   net/cpfl: add Rx queue setup
> >   net/cpfl: support device start and stop
> >   net/cpfl: support queue start
> >   net/cpfl: support queue stop
> >   net/cpfl: support queue release
> >   net/cpfl: support MTU configuration
> >   net/cpfl: support basic Rx data path
> >   net/cpfl: support basic Tx data path
> >   net/cpfl: support write back based on ITR expire
> >   net/cpfl: support RSS
> >   net/cpfl: support Rx offloading
> >   net/cpfl: support Tx offloading
> >   net/cpfl: add AVX512 data path for single queue model
> >   net/cpfl: support timestamp offload
> >   net/cpfl: add AVX512 data path for split queue model
> >   net/cpfl: add HW statistics
> >   net/cpfl: add RSS set/get ops
> >   net/cpfl: support scalar scatter Rx datapath for single queue model
> >   net/cpfl: add xstats ops
> 
> Hi Mingxia, Beilei,
> 
> Is there any missing dependency at this point?