[v1,05/38] net/mvpp2: remove CRC len from MRU validation
diff mbox series

Message ID 20201202101212.4717-6-lironh@marvell.com
State Changes Requested
Delegated to: Jerin Jacob
Headers show
Series
  • net/mvpp2: misc updates
Related show

Checks

Context Check Description
ci/checkpatch success coding style OK

Commit Message

Liron Himi Dec. 2, 2020, 10:11 a.m. UTC
From: Liron Himi <lironh@marvell.com>

CRC is being removed by HW before packet get
write to the buffer, so CRC len should not be
included in MRU validation

Fixes: 79ec62028 ("net/mvpp2: update MTU and MRU related calculations")
Cc: stable@dpdk.org

Signed-off-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Yuri Chipchev <yuric@marvell.com>
---
 drivers/net/mvpp2/mrvl_ethdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Michael Shamis Dec. 23, 2020, 9:42 a.m. UTC | #1
Reviewed-by: Michael Shamis <michaelsh@marvell.com>

-----Original Message-----
From: dev <dev-bounces@dpdk.org> On Behalf Of lironh@marvell.com
Sent: Wednesday, December 2, 2020 12:12 PM
To: Jerin Jacob Kollanukkaran <jerinj@marvell.com>
Cc: dev@dpdk.org; Liron Himi <lironh@marvell.com>; stable@dpdk.org; Yuri Chipchev <yuric@marvell.com>
Subject: [dpdk-dev] [PATCH v1 05/38] net/mvpp2: remove CRC len from MRU validation

From: Liron Himi <lironh@marvell.com>

CRC is being removed by HW before packet get write to the buffer, so CRC len should not be included in MRU validation

Fixes: 79ec62028 ("net/mvpp2: update MTU and MRU related calculations")
Cc: stable@dpdk.org

Signed-off-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Yuri Chipchev <yuric@marvell.com>
---
 drivers/net/mvpp2/mrvl_ethdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mvpp2/mrvl_ethdev.c b/drivers/net/mvpp2/mrvl_ethdev.c index 0985ccebe..dbb193496 100644
--- a/drivers/net/mvpp2/mrvl_ethdev.c
+++ b/drivers/net/mvpp2/mrvl_ethdev.c
@@ -441,8 +441,8 @@ mrvl_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	 * when this feature has not been enabled/supported so far
 	 * (TODO check scattered_rx flag here once scattered RX is supported).
 	 */
-	if (mru + MRVL_PKT_OFFS > mbuf_data_size) {
-		mru = mbuf_data_size - MRVL_PKT_OFFS;
+	if (mru - RTE_ETHER_CRC_LEN + MRVL_PKT_OFFS > mbuf_data_size) {
+		mru = mbuf_data_size + RTE_ETHER_CRC_LEN - MRVL_PKT_OFFS;
 		mtu = MRVL_PP2_MRU_TO_MTU(mru);
 		MRVL_LOG(WARNING, "MTU too big, max MTU possible limitted "
 			"by current mbuf size: %u. Set MTU to %u, MRU to %u",
--
2.28.0

Patch
diff mbox series

diff --git a/drivers/net/mvpp2/mrvl_ethdev.c b/drivers/net/mvpp2/mrvl_ethdev.c
index 0985ccebe..dbb193496 100644
--- a/drivers/net/mvpp2/mrvl_ethdev.c
+++ b/drivers/net/mvpp2/mrvl_ethdev.c
@@ -441,8 +441,8 @@  mrvl_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	 * when this feature has not been enabled/supported so far
 	 * (TODO check scattered_rx flag here once scattered RX is supported).
 	 */
-	if (mru + MRVL_PKT_OFFS > mbuf_data_size) {
-		mru = mbuf_data_size - MRVL_PKT_OFFS;
+	if (mru - RTE_ETHER_CRC_LEN + MRVL_PKT_OFFS > mbuf_data_size) {
+		mru = mbuf_data_size + RTE_ETHER_CRC_LEN - MRVL_PKT_OFFS;
 		mtu = MRVL_PP2_MRU_TO_MTU(mru);
 		MRVL_LOG(WARNING, "MTU too big, max MTU possible limitted "
 			"by current mbuf size: %u. Set MTU to %u, MRU to %u",