[v6,04/10] ethdev: add simple power management API
Checks
Commit Message
From: Liang Ma <liang.j.ma@intel.com>
Add a simple API to allow getting address of next RX descriptor from the
PMD, as well as release notes information.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
Notes:
v6:
- Rebase on top of latest main
- Ensure the API checks queue ID (Konstantin)
- Removed accidental inclusion of unrelated release notes
v5:
- Bring function format in line with other functions in the file
- Ensure the API is supported by the driver before calling it (Konstantin)
doc/guides/rel_notes/release_20_11.rst | 8 ++++++-
lib/librte_ethdev/rte_ethdev.c | 23 +++++++++++++++++++
lib/librte_ethdev/rte_ethdev.h | 26 ++++++++++++++++++++++
lib/librte_ethdev/rte_ethdev_driver.h | 28 ++++++++++++++++++++++++
lib/librte_ethdev/rte_ethdev_version.map | 1 +
5 files changed, 85 insertions(+), 1 deletion(-)
Comments
> From: Liang Ma <liang.j.ma@intel.com>
>
> Add a simple API to allow getting address of next RX descriptor from the
> PMD, as well as release notes information.
>
> Signed-off-by: Liang Ma <liang.j.ma@intel.com>
> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> ---
>
> Notes:
> v6:
> - Rebase on top of latest main
> - Ensure the API checks queue ID (Konstantin)
> - Removed accidental inclusion of unrelated release notes
> v5:
> - Bring function format in line with other functions in the file
> - Ensure the API is supported by the driver before calling it (Konstantin)
>
> doc/guides/rel_notes/release_20_11.rst | 8 ++++++-
> lib/librte_ethdev/rte_ethdev.c | 23 +++++++++++++++++++
> lib/librte_ethdev/rte_ethdev.h | 26 ++++++++++++++++++++++
> lib/librte_ethdev/rte_ethdev_driver.h | 28 ++++++++++++++++++++++++
> lib/librte_ethdev/rte_ethdev_version.map | 1 +
> 5 files changed, 85 insertions(+), 1 deletion(-)
>
> diff --git a/doc/guides/rel_notes/release_20_11.rst b/doc/guides/rel_notes/release_20_11.rst
> index 0925123e9c..ca4f43f7f9 100644
> --- a/doc/guides/rel_notes/release_20_11.rst
> +++ b/doc/guides/rel_notes/release_20_11.rst
> @@ -71,7 +71,13 @@ New Features
> * **Added the FEC API, for a generic FEC query and config.**
>
> Added the FEC API which provides functions for query FEC capabilities and
> - current FEC mode from device. Also, API for configuring FEC mode is also provided.
> + current FEC mode from device. Also, API for configuring FEC mode is also
> + provided.
> +
> +* **ethdev: add 1 new EXPERIMENTAL API for PMD power management.**
> +
> + * ``rte_eth_get_wake_addr()``
> + * add new eth_dev_ops ``get_wake_addr``
>
> * **Updated Broadcom bnxt driver.**
>
> diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
> index 59beb8aec2..5d19c97a3e 100644
> --- a/lib/librte_ethdev/rte_ethdev.c
> +++ b/lib/librte_ethdev/rte_ethdev.c
> @@ -4844,6 +4844,29 @@ rte_eth_tx_burst_mode_get(uint16_t port_id, uint16_t queue_id,
> dev->dev_ops->tx_burst_mode_get(dev, queue_id, mode));
> }
>
> +int
> +rte_eth_get_wake_addr(uint16_t port_id, uint16_t queue_id,
> + volatile void **wake_addr, uint64_t *expected, uint64_t *mask,
> + uint8_t *data_sz)
> +{
> + struct rte_eth_dev *dev;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +
> + dev = &rte_eth_devices[port_id];
> +
> + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_wake_addr, -ENOTSUP);
> +
> + if (queue_id >= dev->data->nb_tx_queues) {
nb_rx_queues
> + RTE_ETHDEV_LOG(ERR, "Invalid TX queue_id=%u\n", queue_id);
RX not TX
> + return -EINVAL;
> + }
> +
> + return eth_err(port_id,
> + dev->dev_ops->get_wake_addr(dev->data->rx_queues[queue_id],
> + wake_addr, expected, mask, data_sz));
> +}
> +
> int
> rte_eth_dev_set_mc_addr_list(uint16_t port_id,
> struct rte_ether_addr *mc_addr_set,
> diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
> index 3a31f94367..005faba455 100644
> --- a/lib/librte_ethdev/rte_ethdev.h
> +++ b/lib/librte_ethdev/rte_ethdev.h
> @@ -4119,6 +4119,32 @@ __rte_experimental
> int rte_eth_tx_burst_mode_get(uint16_t port_id, uint16_t queue_id,
> struct rte_eth_burst_mode *mode);
>
> +/**
> + * Retrieve the wake up address for the receive queue.
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @param queue_id
> + * The Rx queue on the Ethernet device for which information
> + * will be retrieved.
> + * @param wake_addr
> + * The pointer point to the address which is used for monitoring.
> + * @param expected
> + * The pointer point to value to be expected when descriptor is set.
> + * @param mask
> + * The pointer point to comparison bitmask for the expected value.
> + *
> + * @return
> + * - 0: Success.
> + * -ENOTSUP: Operation not supported.
> + * -EINVAL: Invalid parameters.
> + * -ENODEV: Invalid port ID.
> + */
> +__rte_experimental
> +int rte_eth_get_wake_addr(uint16_t port_id, uint16_t queue_id,
> + volatile void **wake_addr, uint64_t *expected, uint64_t *mask,
> + uint8_t *data_sz);
> +
> /**
> * Retrieve device registers and register attributes (number of registers and
> * register size)
> diff --git a/lib/librte_ethdev/rte_ethdev_driver.h b/lib/librte_ethdev/rte_ethdev_driver.h
> index 35cc4fb186..76b179de42 100644
> --- a/lib/librte_ethdev/rte_ethdev_driver.h
> +++ b/lib/librte_ethdev/rte_ethdev_driver.h
> @@ -655,6 +655,32 @@ typedef int (*eth_fec_get_t)(struct rte_eth_dev *dev,
> */
> typedef int (*eth_fec_set_t)(struct rte_eth_dev *dev, uint32_t fec_capa);
>
> +/**
> + * @internal
> + * Get address of memory location whose contents will change whenever there is
> + * new data to be received on an RX queue.
> + *
> + * @param rxq
> + * Ethdev queue pointer.
> + * @param tail_desc_addr
> + * The pointer point to where the address will be stored.
> + * @param expected
> + * The pointer point to value to be expected when descriptor is set.
> + * @param mask
> + * The pointer point to comparison bitmask for the expected value.
> + * @param data_sz
> + * Data size for the expected value (can be 1, 2, 4, or 8 bytes)
> + * @return
> + * Negative errno value on error, 0 on success.
> + *
> + * @retval 0
> + * Success
> + * @retval -EINVAL
> + * Invalid parameters
> + */
> +typedef int (*eth_get_wake_addr_t)(void *rxq, volatile void **tail_desc_addr,
> + uint64_t *expected, uint64_t *mask, uint8_t *data_sz);
> +
> /**
> * @internal A structure containing the functions exported by an Ethernet driver.
> */
> @@ -801,6 +827,8 @@ struct eth_dev_ops {
> /**< Get Forward Error Correction(FEC) mode. */
> eth_fec_set_t fec_set;
> /**< Set Forward Error Correction(FEC) mode. */
> + eth_get_wake_addr_t get_wake_addr;
> + /**< Get next RX queue ring entry address. */
> };
>
> /**
> diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
> index f8a0945812..6c2ea5996d 100644
> --- a/lib/librte_ethdev/rte_ethdev_version.map
> +++ b/lib/librte_ethdev/rte_ethdev_version.map
> @@ -232,6 +232,7 @@ EXPERIMENTAL {
> rte_eth_fec_get_capability;
> rte_eth_fec_get;
> rte_eth_fec_set;
> + rte_eth_get_wake_addr;
> };
>
> INTERNAL {
> --
> 2.17.1
On 14 Oct 14:30, Anatoly Burakov wrote:
> From: Liang Ma <liang.j.ma@intel.com>
>
> Add a simple API to allow getting address of next RX descriptor from the
> PMD, as well as release notes information.
>
> Signed-off-by: Liang Ma <liang.j.ma@intel.com>
> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
<snip>
> diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
> index 3a31f94367..005faba455 100644
> --- a/lib/librte_ethdev/rte_ethdev.h
> +++ b/lib/librte_ethdev/rte_ethdev.h
> @@ -4119,6 +4119,32 @@ __rte_experimental
> int rte_eth_tx_burst_mode_get(uint16_t port_id, uint16_t queue_id,
> struct rte_eth_burst_mode *mode);
>
> +/**
> + * Retrieve the wake up address for the receive queue.
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @param queue_id
> + * The Rx queue on the Ethernet device for which information
> + * will be retrieved.
> + * @param wake_addr
> + * The pointer point to the address which is used for monitoring.
> + * @param expected
> + * The pointer point to value to be expected when descriptor is set.
> + * @param mask
> + * The pointer point to comparison bitmask for the expected value.
> + *
need add the comment of data_sz.
> + * @return
> + * - 0: Success.
> + * -ENOTSUP: Operation not supported.
> + * -EINVAL: Invalid parameters.
> + * -ENODEV: Invalid port ID.
> + */
> +__rte_experimental
> +int rte_eth_get_wake_addr(uint16_t port_id, uint16_t queue_id,
> + volatile void **wake_addr, uint64_t *expected, uint64_t *mask,
> + uint8_t *data_sz);
> +
> /**
> * Retrieve device registers and register attributes (number of registers and
> * register size)
> diff --git a/lib/librte_ethdev/rte_ethdev_driver.h b/lib/librte_ethdev/rte_ethdev_driver.h
> index 35cc4fb186..76b179de42 100644
> --- a/lib/librte_ethdev/rte_ethdev_driver.h
> +++ b/lib/librte_ethdev/rte_ethdev_driver.h
> @@ -655,6 +655,32 @@ typedef int (*eth_fec_get_t)(struct rte_eth_dev *dev,
> */
> typedef int (*eth_fec_set_t)(struct rte_eth_dev *dev, uint32_t fec_capa);
>
> +/**
> + * @internal
> + * Get address of memory location whose contents will change whenever there is
> + * new data to be received on an RX queue.
> + *
> + * @param rxq
> + * Ethdev queue pointer.
> + * @param tail_desc_addr
> + * The pointer point to where the address will be stored.
> + * @param expected
> + * The pointer point to value to be expected when descriptor is set.
> + * @param mask
> + * The pointer point to comparison bitmask for the expected value.
> + * @param data_sz
> + * Data size for the expected value (can be 1, 2, 4, or 8 bytes)
> + * @return
> + * Negative errno value on error, 0 on success.
> + *
> + * @retval 0
> + * Success
> + * @retval -EINVAL
> + * Invalid parameters
> + */
> +typedef int (*eth_get_wake_addr_t)(void *rxq, volatile void **tail_desc_addr,
> + uint64_t *expected, uint64_t *mask, uint8_t *data_sz);
> +
> /**
> * @internal A structure containing the functions exported by an Ethernet driver.
> */
> @@ -801,6 +827,8 @@ struct eth_dev_ops {
> /**< Get Forward Error Correction(FEC) mode. */
> eth_fec_set_t fec_set;
> /**< Set Forward Error Correction(FEC) mode. */
> + eth_get_wake_addr_t get_wake_addr;
> + /**< Get next RX queue ring entry address. */
> };
>
> /**
> diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
> index f8a0945812..6c2ea5996d 100644
> --- a/lib/librte_ethdev/rte_ethdev_version.map
> +++ b/lib/librte_ethdev/rte_ethdev_version.map
> @@ -232,6 +232,7 @@ EXPERIMENTAL {
> rte_eth_fec_get_capability;
> rte_eth_fec_get;
> rte_eth_fec_set;
> + rte_eth_get_wake_addr;
> };
>
> INTERNAL {
> --
> 2.17.1
@@ -71,7 +71,13 @@ New Features
* **Added the FEC API, for a generic FEC query and config.**
Added the FEC API which provides functions for query FEC capabilities and
- current FEC mode from device. Also, API for configuring FEC mode is also provided.
+ current FEC mode from device. Also, API for configuring FEC mode is also
+ provided.
+
+* **ethdev: add 1 new EXPERIMENTAL API for PMD power management.**
+
+ * ``rte_eth_get_wake_addr()``
+ * add new eth_dev_ops ``get_wake_addr``
* **Updated Broadcom bnxt driver.**
@@ -4844,6 +4844,29 @@ rte_eth_tx_burst_mode_get(uint16_t port_id, uint16_t queue_id,
dev->dev_ops->tx_burst_mode_get(dev, queue_id, mode));
}
+int
+rte_eth_get_wake_addr(uint16_t port_id, uint16_t queue_id,
+ volatile void **wake_addr, uint64_t *expected, uint64_t *mask,
+ uint8_t *data_sz)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ dev = &rte_eth_devices[port_id];
+
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_wake_addr, -ENOTSUP);
+
+ if (queue_id >= dev->data->nb_tx_queues) {
+ RTE_ETHDEV_LOG(ERR, "Invalid TX queue_id=%u\n", queue_id);
+ return -EINVAL;
+ }
+
+ return eth_err(port_id,
+ dev->dev_ops->get_wake_addr(dev->data->rx_queues[queue_id],
+ wake_addr, expected, mask, data_sz));
+}
+
int
rte_eth_dev_set_mc_addr_list(uint16_t port_id,
struct rte_ether_addr *mc_addr_set,
@@ -4119,6 +4119,32 @@ __rte_experimental
int rte_eth_tx_burst_mode_get(uint16_t port_id, uint16_t queue_id,
struct rte_eth_burst_mode *mode);
+/**
+ * Retrieve the wake up address for the receive queue.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The Rx queue on the Ethernet device for which information
+ * will be retrieved.
+ * @param wake_addr
+ * The pointer point to the address which is used for monitoring.
+ * @param expected
+ * The pointer point to value to be expected when descriptor is set.
+ * @param mask
+ * The pointer point to comparison bitmask for the expected value.
+ *
+ * @return
+ * - 0: Success.
+ * -ENOTSUP: Operation not supported.
+ * -EINVAL: Invalid parameters.
+ * -ENODEV: Invalid port ID.
+ */
+__rte_experimental
+int rte_eth_get_wake_addr(uint16_t port_id, uint16_t queue_id,
+ volatile void **wake_addr, uint64_t *expected, uint64_t *mask,
+ uint8_t *data_sz);
+
/**
* Retrieve device registers and register attributes (number of registers and
* register size)
@@ -655,6 +655,32 @@ typedef int (*eth_fec_get_t)(struct rte_eth_dev *dev,
*/
typedef int (*eth_fec_set_t)(struct rte_eth_dev *dev, uint32_t fec_capa);
+/**
+ * @internal
+ * Get address of memory location whose contents will change whenever there is
+ * new data to be received on an RX queue.
+ *
+ * @param rxq
+ * Ethdev queue pointer.
+ * @param tail_desc_addr
+ * The pointer point to where the address will be stored.
+ * @param expected
+ * The pointer point to value to be expected when descriptor is set.
+ * @param mask
+ * The pointer point to comparison bitmask for the expected value.
+ * @param data_sz
+ * Data size for the expected value (can be 1, 2, 4, or 8 bytes)
+ * @return
+ * Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ * Success
+ * @retval -EINVAL
+ * Invalid parameters
+ */
+typedef int (*eth_get_wake_addr_t)(void *rxq, volatile void **tail_desc_addr,
+ uint64_t *expected, uint64_t *mask, uint8_t *data_sz);
+
/**
* @internal A structure containing the functions exported by an Ethernet driver.
*/
@@ -801,6 +827,8 @@ struct eth_dev_ops {
/**< Get Forward Error Correction(FEC) mode. */
eth_fec_set_t fec_set;
/**< Set Forward Error Correction(FEC) mode. */
+ eth_get_wake_addr_t get_wake_addr;
+ /**< Get next RX queue ring entry address. */
};
/**
@@ -232,6 +232,7 @@ EXPERIMENTAL {
rte_eth_fec_get_capability;
rte_eth_fec_get;
rte_eth_fec_set;
+ rte_eth_get_wake_addr;
};
INTERNAL {