[v7,01/11] drivers/baseband: add PMD for ACC100
diff mbox series

Message ID 1600827906-73771-2-git-send-email-nicolas.chautru@intel.com
State Deferred
Delegated to: akhil goyal
Headers show
Series
  • bbdev PMD ACC100
Related show

Checks

Context Check Description
ci/checkpatch success coding style OK

Commit Message

Nicolas Chautru Sept. 23, 2020, 2:24 a.m. UTC
Add stubs for the ACC100 PMD

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <Tianjiao.liu@intel.com>
---
 doc/guides/bbdevs/acc100.rst                       | 233 +++++++++++++++++++++
 doc/guides/bbdevs/index.rst                        |   1 +
 doc/guides/rel_notes/release_20_11.rst             |   6 +
 drivers/baseband/acc100/meson.build                |   6 +
 drivers/baseband/acc100/rte_acc100_pmd.c           | 175 ++++++++++++++++
 drivers/baseband/acc100/rte_acc100_pmd.h           |  37 ++++
 .../acc100/rte_pmd_bbdev_acc100_version.map        |   3 +
 drivers/baseband/meson.build                       |   2 +-
 8 files changed, 462 insertions(+), 1 deletion(-)
 create mode 100644 doc/guides/bbdevs/acc100.rst
 create mode 100644 drivers/baseband/acc100/meson.build
 create mode 100644 drivers/baseband/acc100/rte_acc100_pmd.c
 create mode 100644 drivers/baseband/acc100/rte_acc100_pmd.h
 create mode 100644 drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map

Patch
diff mbox series

diff --git a/doc/guides/bbdevs/acc100.rst b/doc/guides/bbdevs/acc100.rst
new file mode 100644
index 0000000..f87ee09
--- /dev/null
+++ b/doc/guides/bbdevs/acc100.rst
@@ -0,0 +1,233 @@ 
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2020 Intel Corporation
+
+Intel(R) ACC100 5G/4G FEC Poll Mode Driver
+==========================================
+
+The BBDEV ACC100 5G/4G FEC poll mode driver (PMD) supports an
+implementation of a VRAN FEC wireless acceleration function.
+This device is also known as Mount Bryce.
+
+Features
+--------
+
+ACC100 5G/4G FEC PMD supports the following features:
+
+- LDPC Encode in the DL (5GNR)
+- LDPC Decode in the UL (5GNR)
+- Turbo Encode in the DL (4G)
+- Turbo Decode in the UL (4G)
+- 16 VFs per PF (physical device)
+- Maximum of 128 queues per VF
+- PCIe Gen-3 x16 Interface
+- MSI
+- SR-IOV
+
+ACC100 5G/4G FEC PMD supports the following BBDEV capabilities:
+
+* For the LDPC encode operation:
+   - ``RTE_BBDEV_LDPC_CRC_24B_ATTACH`` :  set to attach CRC24B to CB(s)
+   - ``RTE_BBDEV_LDPC_RATE_MATCH`` :  if set then do not do Rate Match bypass
+   - ``RTE_BBDEV_LDPC_INTERLEAVER_BYPASS`` : if set then bypass interleaver
+
+* For the LDPC decode operation:
+   - ``RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK`` :  check CRC24B from CB(s)
+   - ``RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE`` :  disable early termination
+   - ``RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP`` :  drops CRC24B bits appended while decoding
+   - ``RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE`` :  provides an input for HARQ combining
+   - ``RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE`` :  provides an input for HARQ combining
+   - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE`` :  HARQ memory input is internal
+   - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE`` :  HARQ memory output is internal
+   - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK`` :  loopback data to/from HARQ memory
+   - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_FILLERS`` :  HARQ memory includes the fillers bits
+   - ``RTE_BBDEV_LDPC_DEC_SCATTER_GATHER`` :  supports scatter-gather for input/output data
+   - ``RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION`` :  supports compression of the HARQ input/output
+   - ``RTE_BBDEV_LDPC_LLR_COMPRESSION`` :  supports LLR input compression
+
+* For the turbo encode operation:
+   - ``RTE_BBDEV_TURBO_CRC_24B_ATTACH`` :  set to attach CRC24B to CB(s)
+   - ``RTE_BBDEV_TURBO_RATE_MATCH`` :  if set then do not do Rate Match bypass
+   - ``RTE_BBDEV_TURBO_ENC_INTERRUPTS`` :  set for encoder dequeue interrupts
+   - ``RTE_BBDEV_TURBO_RV_INDEX_BYPASS`` :  set to bypass RV index
+   - ``RTE_BBDEV_TURBO_ENC_SCATTER_GATHER`` :  supports scatter-gather for input/output data
+
+* For the turbo decode operation:
+   - ``RTE_BBDEV_TURBO_CRC_TYPE_24B`` :  check CRC24B from CB(s)
+   - ``RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE`` :  perform subblock de-interleave
+   - ``RTE_BBDEV_TURBO_DEC_INTERRUPTS`` :  set for decoder dequeue interrupts
+   - ``RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN`` :  set if negative LLR encoder i/p is supported
+   - ``RTE_BBDEV_TURBO_POS_LLR_1_BIT_IN`` :  set if positive LLR encoder i/p is supported
+   - ``RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP`` :  keep CRC24B bits appended while decoding
+   - ``RTE_BBDEV_TURBO_EARLY_TERMINATION`` :  set early early termination feature
+   - ``RTE_BBDEV_TURBO_DEC_SCATTER_GATHER`` :  supports scatter-gather for input/output data
+   - ``RTE_BBDEV_TURBO_HALF_ITERATION_EVEN`` :  set half iteration granularity
+
+Installation
+------------
+
+Section 3 of the DPDK manual provides instuctions on installing and compiling DPDK. The
+default set of bbdev compile flags may be found in config/common_base, where for example
+the flag to build the ACC100 5G/4G FEC device, ``CONFIG_RTE_LIBRTE_PMD_BBDEV_ACC100``,
+is already set.
+
+DPDK requires hugepages to be configured as detailed in section 2 of the DPDK manual.
+The bbdev test application has been tested with a configuration 40 x 1GB hugepages. The
+hugepage configuration of a server may be examined using:
+
+.. code-block:: console
+
+   grep Huge* /proc/meminfo
+
+
+Initialization
+--------------
+
+When the device first powers up, its PCI Physical Functions (PF) can be listed through this command:
+
+.. code-block:: console
+
+  sudo lspci -vd8086:0d5c
+
+The physical and virtual functions are compatible with Linux UIO drivers:
+``vfio`` and ``igb_uio``. However, in order to work the ACC100 5G/4G
+FEC device firstly needs to be bound to one of these linux drivers through DPDK.
+
+
+Bind PF UIO driver(s)
+~~~~~~~~~~~~~~~~~~~~~
+
+Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use
+``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver.
+
+The igb_uio driver may be bound to the PF PCI device using one of three methods:
+
+
+1. PCI functions (physical or virtual, depending on the use case) can be bound to
+the UIO driver by repeating this command for every function.
+
+.. code-block:: console
+
+  cd <dpdk-top-level-directory>
+  insmod ./build/kmod/igb_uio.ko
+  echo "8086 0d5c" > /sys/bus/pci/drivers/igb_uio/new_id
+  lspci -vd8086:0d5c
+
+
+2. Another way to bind PF with DPDK UIO driver is by using the ``dpdk-devbind.py`` tool
+
+.. code-block:: console
+
+  cd <dpdk-top-level-directory>
+  ./usertools/dpdk-devbind.py -b igb_uio 0000:06:00.0
+
+where the PCI device ID (example: 0000:06:00.0) is obtained using lspci -vd8086:0d5c
+
+
+3. A third way to bind is to use ``dpdk-setup.sh`` tool
+
+.. code-block:: console
+
+  cd <dpdk-top-level-directory>
+  ./usertools/dpdk-setup.sh
+
+  select 'Bind Ethernet/Crypto/Baseband device to IGB UIO module'
+  or
+  select 'Bind Ethernet/Crypto/Baseband device to VFIO module' depending on driver required
+  enter PCI device ID
+  select 'Display current Ethernet/Crypto/Baseband device settings' to confirm binding
+
+
+In the same way the ACC100 5G/4G FEC PF can be bound with vfio, but vfio driver does not
+support SR-IOV configuration right out of the box, so it will need to be patched.
+
+
+Enable Virtual Functions
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Now, it should be visible in the printouts that PCI PF is under igb_uio control
+"``Kernel driver in use: igb_uio``"
+
+To show the number of available VFs on the device, read ``sriov_totalvfs`` file..
+
+.. code-block:: console
+
+  cat /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/sriov_totalvfs
+
+  where 0000\:<b>\:<d>.<f> is the PCI device ID
+
+
+To enable VFs via igb_uio, echo the number of virtual functions intended to
+enable to ``max_vfs`` file..
+
+.. code-block:: console
+
+  echo <num-of-vfs> > /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/max_vfs
+
+
+Afterwards, all VFs must be bound to appropriate UIO drivers as required, same
+way it was done with the physical function previously.
+
+Enabling SR-IOV via vfio driver is pretty much the same, except that the file
+name is different:
+
+.. code-block:: console
+
+  echo <num-of-vfs> > /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/sriov_numvfs
+
+
+Configure the VFs through PF
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The PCI virtual functions must be configured before working or getting assigned
+to VMs/Containers. The configuration involves allocating the number of hardware
+queues, priorities, load balance, bandwidth and other settings necessary for the
+device to perform FEC functions.
+
+This configuration needs to be executed at least once after reboot or PCI FLR and can
+be achieved by using the function ``acc100_configure()``, which sets up the
+parameters defined in ``acc100_conf`` structure.
+
+Test Application
+----------------
+
+BBDEV provides a test application, ``test-bbdev.py`` and range of test data for testing
+the functionality of ACC100 5G/4G FEC encode and decode, depending on the device's
+capabilities. The test application is located under app->test-bbdev folder and has the
+following options:
+
+.. code-block:: console
+
+  "-p", "--testapp-path": specifies path to the bbdev test app.
+  "-e", "--eal-params"	: EAL arguments which are passed to the test app.
+  "-t", "--timeout"	: Timeout in seconds (default=300).
+  "-c", "--test-cases"	: Defines test cases to run. Run all if not specified.
+  "-v", "--test-vector"	: Test vector path (default=dpdk_path+/app/test-bbdev/test_vectors/bbdev_null.data).
+  "-n", "--num-ops"	: Number of operations to process on device (default=32).
+  "-b", "--burst-size"	: Operations enqueue/dequeue burst size (default=32).
+  "-s", "--snr"		: SNR in dB used when generating LLRs for bler tests.
+  "-s", "--iter_max"	: Number of iterations for LDPC decoder.
+  "-l", "--num-lcores"	: Number of lcores to run (default=16).
+  "-i", "--init-device" : Initialise PF device with default values.
+
+
+To execute the test application tool using simple decode or encode data,
+type one of the following:
+
+.. code-block:: console
+
+  ./test-bbdev.py -c validation -n 64 -b 1 -v ./ldpc_dec_default.data
+  ./test-bbdev.py -c validation -n 64 -b 1 -v ./ldpc_enc_default.data
+
+
+The test application ``test-bbdev.py``, supports the ability to configure the PF device with
+a default set of values, if the "-i" or "- -init-device" option is included. The default values
+are defined in test_bbdev_perf.c.
+
+
+Test Vectors
+~~~~~~~~~~~~
+
+In addition to the simple LDPC decoder and LDPC encoder tests, bbdev also provides
+a range of additional tests under the test_vectors folder, which may be useful. The results
+of these tests will depend on the ACC100 5G/4G FEC capabilities which may cause some
+testcases to be skipped, but no failure should be reported.
diff --git a/doc/guides/bbdevs/index.rst b/doc/guides/bbdevs/index.rst
index a8092dd..4445cbd 100644
--- a/doc/guides/bbdevs/index.rst
+++ b/doc/guides/bbdevs/index.rst
@@ -13,3 +13,4 @@  Baseband Device Drivers
     turbo_sw
     fpga_lte_fec
     fpga_5gnr_fec
+    acc100
diff --git a/doc/guides/rel_notes/release_20_11.rst b/doc/guides/rel_notes/release_20_11.rst
index 73ac08f..20639ea 100644
--- a/doc/guides/rel_notes/release_20_11.rst
+++ b/doc/guides/rel_notes/release_20_11.rst
@@ -55,6 +55,12 @@  New Features
      Also, make sure to start the actual text at the margin.
      =======================================================
 
+* **Added Intel ACC100 bbdev PMD.**
+
+  Added a new ``acc100`` bbdev driver for the Intel\ |reg| ACC100 accelerator
+  also known as Mount Bryce.  See the
+  :doc:`../bbdevs/acc100` BBDEV guide for more details on this new driver.
+
 
 Removed Items
 -------------
diff --git a/drivers/baseband/acc100/meson.build b/drivers/baseband/acc100/meson.build
new file mode 100644
index 0000000..8afafc2
--- /dev/null
+++ b/drivers/baseband/acc100/meson.build
@@ -0,0 +1,6 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2020 Intel Corporation
+
+deps += ['bbdev', 'bus_vdev', 'ring', 'pci', 'bus_pci']
+
+sources = files('rte_acc100_pmd.c')
diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c b/drivers/baseband/acc100/rte_acc100_pmd.c
new file mode 100644
index 0000000..1b4cd13
--- /dev/null
+++ b/drivers/baseband/acc100/rte_acc100_pmd.c
@@ -0,0 +1,175 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+#include <unistd.h>
+
+#include <rte_common.h>
+#include <rte_log.h>
+#include <rte_dev.h>
+#include <rte_malloc.h>
+#include <rte_mempool.h>
+#include <rte_byteorder.h>
+#include <rte_errno.h>
+#include <rte_branch_prediction.h>
+#include <rte_hexdump.h>
+#include <rte_pci.h>
+#include <rte_bus_pci.h>
+
+#include <rte_bbdev.h>
+#include <rte_bbdev_pmd.h>
+#include "rte_acc100_pmd.h"
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+RTE_LOG_REGISTER(acc100_logtype, pmd.bb.acc100, DEBUG);
+#else
+RTE_LOG_REGISTER(acc100_logtype, pmd.bb.acc100, NOTICE);
+#endif
+
+/* Free 64MB memory used for software rings */
+static int
+acc100_dev_close(struct rte_bbdev *dev  __rte_unused)
+{
+	return 0;
+}
+
+static const struct rte_bbdev_ops acc100_bbdev_ops = {
+	.close = acc100_dev_close,
+};
+
+/* ACC100 PCI PF address map */
+static struct rte_pci_id pci_id_acc100_pf_map[] = {
+	{
+		RTE_PCI_DEVICE(RTE_ACC100_VENDOR_ID, RTE_ACC100_PF_DEVICE_ID)
+	},
+	{.device_id = 0},
+};
+
+/* ACC100 PCI VF address map */
+static struct rte_pci_id pci_id_acc100_vf_map[] = {
+	{
+		RTE_PCI_DEVICE(RTE_ACC100_VENDOR_ID, RTE_ACC100_VF_DEVICE_ID)
+	},
+	{.device_id = 0},
+};
+
+/* Initialization Function */
+static void
+acc100_bbdev_init(struct rte_bbdev *dev, struct rte_pci_driver *drv)
+{
+	struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(dev->device);
+
+	dev->dev_ops = &acc100_bbdev_ops;
+
+	((struct acc100_device *) dev->data->dev_private)->pf_device =
+			!strcmp(drv->driver.name,
+					RTE_STR(ACC100PF_DRIVER_NAME));
+	((struct acc100_device *) dev->data->dev_private)->mmio_base =
+			pci_dev->mem_resource[0].addr;
+
+	rte_bbdev_log_debug("Init device %s [%s] @ vaddr %p paddr %#"PRIx64"",
+			drv->driver.name, dev->data->name,
+			(void *)pci_dev->mem_resource[0].addr,
+			pci_dev->mem_resource[0].phys_addr);
+}
+
+static int acc100_pci_probe(struct rte_pci_driver *pci_drv,
+	struct rte_pci_device *pci_dev)
+{
+	struct rte_bbdev *bbdev = NULL;
+	char dev_name[RTE_BBDEV_NAME_MAX_LEN];
+
+	if (pci_dev == NULL) {
+		rte_bbdev_log(ERR, "NULL PCI device");
+		return -EINVAL;
+	}
+
+	rte_pci_device_name(&pci_dev->addr, dev_name, sizeof(dev_name));
+
+	/* Allocate memory to be used privately by drivers */
+	bbdev = rte_bbdev_allocate(pci_dev->device.name);
+	if (bbdev == NULL)
+		return -ENODEV;
+
+	/* allocate device private memory */
+	bbdev->data->dev_private = rte_zmalloc_socket(dev_name,
+			sizeof(struct acc100_device), RTE_CACHE_LINE_SIZE,
+			pci_dev->device.numa_node);
+
+	if (bbdev->data->dev_private == NULL) {
+		rte_bbdev_log(CRIT,
+				"Allocate of %zu bytes for device \"%s\" failed",
+				sizeof(struct acc100_device), dev_name);
+				rte_bbdev_release(bbdev);
+			return -ENOMEM;
+	}
+
+	/* Fill HW specific part of device structure */
+	bbdev->device = &pci_dev->device;
+	bbdev->intr_handle = &pci_dev->intr_handle;
+	bbdev->data->socket_id = pci_dev->device.numa_node;
+
+	/* Invoke ACC100 device initialization function */
+	acc100_bbdev_init(bbdev, pci_drv);
+
+	rte_bbdev_log_debug("Initialised bbdev %s (id = %u)",
+			dev_name, bbdev->data->dev_id);
+	return 0;
+}
+
+static int acc100_pci_remove(struct rte_pci_device *pci_dev)
+{
+	struct rte_bbdev *bbdev;
+	int ret;
+	uint8_t dev_id;
+
+	if (pci_dev == NULL)
+		return -EINVAL;
+
+	/* Find device */
+	bbdev = rte_bbdev_get_named_dev(pci_dev->device.name);
+	if (bbdev == NULL) {
+		rte_bbdev_log(CRIT,
+				"Couldn't find HW dev \"%s\" to uninitialise it",
+				pci_dev->device.name);
+		return -ENODEV;
+	}
+	dev_id = bbdev->data->dev_id;
+
+	/* free device private memory before close */
+	rte_free(bbdev->data->dev_private);
+
+	/* Close device */
+	ret = rte_bbdev_close(dev_id);
+	if (ret < 0)
+		rte_bbdev_log(ERR,
+				"Device %i failed to close during uninit: %i",
+				dev_id, ret);
+
+	/* release bbdev from library */
+	rte_bbdev_release(bbdev);
+
+	rte_bbdev_log_debug("Destroyed bbdev = %u", dev_id);
+
+	return 0;
+}
+
+static struct rte_pci_driver acc100_pci_pf_driver = {
+		.probe = acc100_pci_probe,
+		.remove = acc100_pci_remove,
+		.id_table = pci_id_acc100_pf_map,
+		.drv_flags = RTE_PCI_DRV_NEED_MAPPING
+};
+
+static struct rte_pci_driver acc100_pci_vf_driver = {
+		.probe = acc100_pci_probe,
+		.remove = acc100_pci_remove,
+		.id_table = pci_id_acc100_vf_map,
+		.drv_flags = RTE_PCI_DRV_NEED_MAPPING
+};
+
+RTE_PMD_REGISTER_PCI(ACC100PF_DRIVER_NAME, acc100_pci_pf_driver);
+RTE_PMD_REGISTER_PCI_TABLE(ACC100PF_DRIVER_NAME, pci_id_acc100_pf_map);
+RTE_PMD_REGISTER_PCI(ACC100VF_DRIVER_NAME, acc100_pci_vf_driver);
+RTE_PMD_REGISTER_PCI_TABLE(ACC100VF_DRIVER_NAME, pci_id_acc100_vf_map);
+
diff --git a/drivers/baseband/acc100/rte_acc100_pmd.h b/drivers/baseband/acc100/rte_acc100_pmd.h
new file mode 100644
index 0000000..6f46df0
--- /dev/null
+++ b/drivers/baseband/acc100/rte_acc100_pmd.h
@@ -0,0 +1,37 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+#ifndef _RTE_ACC100_PMD_H_
+#define _RTE_ACC100_PMD_H_
+
+/* Helper macro for logging */
+#define rte_bbdev_log(level, fmt, ...) \
+	rte_log(RTE_LOG_ ## level, acc100_logtype, fmt "\n", \
+		##__VA_ARGS__)
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+#define rte_bbdev_log_debug(fmt, ...) \
+		rte_bbdev_log(DEBUG, "acc100_pmd: " fmt, \
+		##__VA_ARGS__)
+#else
+#define rte_bbdev_log_debug(fmt, ...)
+#endif
+
+/* ACC100 PF and VF driver names */
+#define ACC100PF_DRIVER_NAME           intel_acc100_pf
+#define ACC100VF_DRIVER_NAME           intel_acc100_vf
+
+/* ACC100 PCI vendor & device IDs */
+#define RTE_ACC100_VENDOR_ID           (0x8086)
+#define RTE_ACC100_PF_DEVICE_ID        (0x0d5c)
+#define RTE_ACC100_VF_DEVICE_ID        (0x0d5d)
+
+/* Private data structure for each ACC100 device */
+struct acc100_device {
+	void *mmio_base;  /**< Base address of MMIO registers (BAR0) */
+	bool pf_device; /**< True if this is a PF ACC100 device */
+	bool configured; /**< True if this ACC100 device is configured */
+};
+
+#endif /* _RTE_ACC100_PMD_H_ */
diff --git a/drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map b/drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map
new file mode 100644
index 0000000..4a76d1d
--- /dev/null
+++ b/drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map
@@ -0,0 +1,3 @@ 
+DPDK_21 {
+	local: *;
+};
diff --git a/drivers/baseband/meson.build b/drivers/baseband/meson.build
index 415b672..72301ce 100644
--- a/drivers/baseband/meson.build
+++ b/drivers/baseband/meson.build
@@ -5,7 +5,7 @@  if is_windows
 	subdir_done()
 endif
 
-drivers = ['null', 'turbo_sw', 'fpga_lte_fec', 'fpga_5gnr_fec']
+drivers = ['null', 'turbo_sw', 'fpga_lte_fec', 'fpga_5gnr_fec', 'acc100']
 
 config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@'
 driver_name_fmt = 'rte_pmd_bbdev_@0@'