[1/3] crypto/octeontx2: move functions to helper file
diff mbox series

Message ID 20200908100956.25868-2-adwivedi@marvell.com
State Superseded
Delegated to: akhil goyal
Headers show
Series
  • event/octeontx2: add support for event crypto adapter
Related show

Checks

Context Check Description
ci/checkpatch success coding style OK

Commit Message

Ankur Dwivedi Sept. 8, 2020, 10:09 a.m. UTC
Some functions are common across cryptodev pmd and the event
crypto adapter. This patch moves them into a helper file.

Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
---
 drivers/crypto/octeontx2/otx2_cryptodev_ops.c | 65 +---------------
 .../octeontx2/otx2_cryptodev_ops_helper.h     | 74 +++++++++++++++++++
 2 files changed, 75 insertions(+), 64 deletions(-)
 create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev_ops_helper.h

Patch
diff mbox series

diff --git a/drivers/crypto/octeontx2/otx2_cryptodev_ops.c b/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
index ccf566d5f..77842b4ad 100644
--- a/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
+++ b/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
@@ -13,6 +13,7 @@ 
 #include "otx2_cryptodev_hw_access.h"
 #include "otx2_cryptodev_mbox.h"
 #include "otx2_cryptodev_ops.h"
+#include "otx2_cryptodev_ops_helper.h"
 #include "otx2_ipsec_po_ops.h"
 #include "otx2_mbox.h"
 #include "otx2_sec_idev.h"
@@ -416,24 +417,6 @@  sym_session_configure(int driver_id, struct rte_crypto_sym_xform *xform,
 	return -ENOTSUP;
 }
 
-static void
-sym_session_clear(int driver_id, struct rte_cryptodev_sym_session *sess)
-{
-	void *priv = get_sym_session_private_data(sess, driver_id);
-	struct rte_mempool *pool;
-
-	if (priv == NULL)
-		return;
-
-	memset(priv, 0, cpt_get_session_size());
-
-	pool = rte_mempool_from_obj(priv);
-
-	set_sym_session_private_data(sess, driver_id, NULL);
-
-	rte_mempool_put(pool, priv);
-}
-
 static __rte_always_inline int32_t __rte_hot
 otx2_cpt_enqueue_req(const struct otx2_cpt_qp *qp,
 		     struct pending_queue *pend_q,
@@ -917,52 +900,6 @@  otx2_cpt_dequeue_post_process(struct otx2_cpt_qp *qp, struct rte_crypto_op *cop,
 	}
 }
 
-static __rte_always_inline uint8_t
-otx2_cpt_compcode_get(struct cpt_request_info *req)
-{
-	volatile struct cpt_res_s_9s *res;
-	uint8_t ret;
-
-	res = (volatile struct cpt_res_s_9s *)req->completion_addr;
-
-	if (unlikely(res->compcode == CPT_9X_COMP_E_NOTDONE)) {
-		if (rte_get_timer_cycles() < req->time_out)
-			return ERR_REQ_PENDING;
-
-		CPT_LOG_DP_ERR("Request timed out");
-		return ERR_REQ_TIMEOUT;
-	}
-
-	if (likely(res->compcode == CPT_9X_COMP_E_GOOD)) {
-		ret = NO_ERR;
-		if (unlikely(res->uc_compcode)) {
-			ret = res->uc_compcode;
-			CPT_LOG_DP_DEBUG("Request failed with microcode error");
-			CPT_LOG_DP_DEBUG("MC completion code 0x%x",
-					 res->uc_compcode);
-		}
-	} else {
-		CPT_LOG_DP_DEBUG("HW completion code 0x%x", res->compcode);
-
-		ret = res->compcode;
-		switch (res->compcode) {
-		case CPT_9X_COMP_E_INSTERR:
-			CPT_LOG_DP_ERR("Request failed with instruction error");
-			break;
-		case CPT_9X_COMP_E_FAULT:
-			CPT_LOG_DP_ERR("Request failed with DMA fault");
-			break;
-		case CPT_9X_COMP_E_HWERR:
-			CPT_LOG_DP_ERR("Request failed with hardware error");
-			break;
-		default:
-			CPT_LOG_DP_ERR("Request failed with unknown completion code");
-		}
-	}
-
-	return ret;
-}
-
 static uint16_t
 otx2_cpt_dequeue_burst(void *qptr, struct rte_crypto_op **ops, uint16_t nb_ops)
 {
diff --git a/drivers/crypto/octeontx2/otx2_cryptodev_ops_helper.h b/drivers/crypto/octeontx2/otx2_cryptodev_ops_helper.h
new file mode 100644
index 000000000..764daadea
--- /dev/null
+++ b/drivers/crypto/octeontx2/otx2_cryptodev_ops_helper.h
@@ -0,0 +1,74 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#ifndef _OTX2_CRYPTODEV_OPS_HELPER_H_
+#define _OTX2_CRYPTODEV_OPS_HELPER_H_
+
+#include "cpt_pmd_logs.h"
+
+static void
+sym_session_clear(int driver_id, struct rte_cryptodev_sym_session *sess)
+{
+	void *priv = get_sym_session_private_data(sess, driver_id);
+	struct rte_mempool *pool;
+
+	if (priv == NULL)
+		return;
+
+	memset(priv, 0, cpt_get_session_size());
+
+	pool = rte_mempool_from_obj(priv);
+
+	set_sym_session_private_data(sess, driver_id, NULL);
+
+	rte_mempool_put(pool, priv);
+}
+
+static __rte_always_inline uint8_t
+otx2_cpt_compcode_get(struct cpt_request_info *req)
+{
+	volatile struct cpt_res_s_9s *res;
+	uint8_t ret;
+
+	res = (volatile struct cpt_res_s_9s *)req->completion_addr;
+
+	if (unlikely(res->compcode == CPT_9X_COMP_E_NOTDONE)) {
+		if (rte_get_timer_cycles() < req->time_out)
+			return ERR_REQ_PENDING;
+
+		CPT_LOG_DP_ERR("Request timed out");
+		return ERR_REQ_TIMEOUT;
+	}
+
+	if (likely(res->compcode == CPT_9X_COMP_E_GOOD)) {
+		ret = NO_ERR;
+		if (unlikely(res->uc_compcode)) {
+			ret = res->uc_compcode;
+			CPT_LOG_DP_DEBUG("Request failed with microcode error");
+			CPT_LOG_DP_DEBUG("MC completion code 0x%x",
+					 res->uc_compcode);
+		}
+	} else {
+		CPT_LOG_DP_DEBUG("HW completion code 0x%x", res->compcode);
+
+		ret = res->compcode;
+		switch (res->compcode) {
+		case CPT_9X_COMP_E_INSTERR:
+			CPT_LOG_DP_ERR("Request failed with instruction error");
+			break;
+		case CPT_9X_COMP_E_FAULT:
+			CPT_LOG_DP_ERR("Request failed with DMA fault");
+			break;
+		case CPT_9X_COMP_E_HWERR:
+			CPT_LOG_DP_ERR("Request failed with hardware error");
+			break;
+		default:
+			CPT_LOG_DP_ERR("Request failed with unknown completion code");
+		}
+	}
+
+	return ret;
+}
+
+#endif /* _OTX2_CRYPTODEV_OPS_HELPER_H_ */