diff mbox series

[v1] test_plans/vhost_user_interrupt_test_plan.rst

Message ID 20200827173240.43395-1-yinan.wang@intel.com (mailing list archive)
State Accepted
Headers
Series [v1] test_plans/vhost_user_interrupt_test_plan.rst |

Commit Message

Wang, Yinan Aug. 27, 2020, 5:32 p.m. UTC 
  Add cbdma cases in vhost_user_interrupt test plan

Signed-off-by: Yinan Wang <yinan.wang@intel.com>
---
 test_plans/vhost_user_interrupt_test_plan.rst | 150 ++++++++++++++++++
 1 file changed, 150 insertions(+)
 create mode 100644 test_plans/vhost_user_interrupt_test_plan.rst

Comments

Tu, Lijuan Sept. 2, 2020, 3:12 a.m. UTC | #1 
> Subject: [dts] [PATCH v1] test_plans/vhost_user_interrupt_test_plan.rst
> 
> Add cbdma cases in vhost_user_interrupt test plan
> 
> Signed-off-by: Yinan Wang <yinan.wang@intel.com>

Applied
diff mbox series

Patch

diff --git a/test_plans/vhost_user_interrupt_test_plan.rst b/test_plans/vhost_user_interrupt_test_plan.rst
new file mode 100644
index 0000000..ea030a9
--- /dev/null
+++ b/test_plans/vhost_user_interrupt_test_plan.rst
@@ -0,0 +1,150 @@ 
+.. Copyright (c) <2019>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+===================================
+vhost-user interrupt mode test plan
+===================================
+
+Description
+===========
+
+Vhost-user interrupt need test with l3fwd-power sample, small packets send from virtio-user to vhost side，
+check vhost-user cores can be wakeup，and vhost-user cores should be back to sleep after stop sending packets
+from virtio side.
+
+Test flow
+=========
+
+Virtio-user --> Vhost-user
+
+Test Case1: Wake up split ring vhost-user core with l3fwd-power sample
+======================================================================
+
+1. Launch virtio-user with server mode::
+
+    ./testpmd -l 7-8 -n 4 --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1 -- -i
+
+2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
+
+    ./l3fwd-power -l 0-3 -n 4 --no-pci \
+    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-ptype 1 --config "(0,0,2)"
+
+3. Send packet by testpmd, check vhost-user core will keep wakeup status::
+
+    testpmd>set fwd txonly
+    testpmd>start
+
+4. Stop and restart testpmd again, check vhost-user core will sleep and wakeup again.
+
+Test Case2: Wake up split ring vhost-user cores with l3fwd-power sample when multi queues are enabled
+=====================================================================================================
+
+1. Launch virtio-user with server mode::
+
+    ./testpmd -l 1-5 -n 4 --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4 -- -i --rxq=4 --txq=4 --rss-ip
+
+2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
+
+    ./l3fwd-power -l 9-12 -n 4 --no-pci --log-level=9 \
+    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-ptype 1 \
+    --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
+
+3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup status::
+
+    testpmd>set fwd txonly
+    testpmd>start
+
+4. Stop and restart testpmd again, check vhost-user cores will sleep and wakeup again.
+
+Test Case3: Wake up packed ring vhost-user core with l3fwd-power sample
+=======================================================================
+
+1. Launch virtio-user with server mode::
+
+    ./testpmd -l 7-8 -n 4 --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1,packed_vq=1 -- -i
+
+2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
+
+    ./l3fwd-power -l 0-3 -n 4 --no-pci \
+    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-ptype 1 --config "(0,0,2)"
+
+3. Send packet by testpmd, check vhost-user core will keep wakeup status::
+
+    testpmd>set fwd txonly
+    testpmd>start
+
+4. Stop and restart testpmd again, check vhost-user core will sleep and wakeup again.
+
+Test Case4:  Wake up packed ring vhost-user cores with l3fwd-power sample when multi queues are enabled
+=======================================================================================================
+
+1. Launch virtio-user with server mode::
+
+    ./testpmd -l 1-5 -n 4 --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4,packed_vq=1,mrg_rxbuf=0 -- -i --rxq=4 --txq=4 --rss-ip
+
+2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
+
+    ./l3fwd-power -l 9-12 -n 4 --no-pci --log-level=9 \
+    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-ptype 1 \
+    --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
+
+3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup status::
+
+    testpmd>set fwd txonly
+    testpmd>start
+
+4. Stop and restart testpmd again, check vhost-user cores will sleep and wakeup again.
+
+Test Case5: Wake up split ring vhost-user cores with l3fwd-power sample when multi queues and cbdma are enabled
+===============================================================================================================
+
+1. Launch virtio-user with server mode::
+
+    ./testpmd -l 1-5 -n 4 --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4 -- -i --rxq=4 --txq=4 --rss-ip
+
+2. Bind 4 cbdma ports to igb_uio driver, then launch l3fwd-power with a virtual vhost device::
+
+    ./l3fwd-power -l 9-12 -n 4 --log-level=9 \
+    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3]' -- -p 0x1 --parse-ptype 1 \
+    --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
+
+3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup status::
+
+    testpmd>set fwd txonly
+    testpmd>start
+
+4. Stop and restart testpmd again, check vhost-user cores will sleep and wakeup again.
\ No newline at end of file