test_plans: add port information change
diff mbox series

Message ID 1597157354-169781-1-git-send-email-yuan.peng@intel.com
State Accepted
Headers show
Series
  • test_plans: add port information change
Related show

Commit Message

Peng, Yuan Aug. 11, 2020, 2:49 p.m. UTC
add port information change to flow_classify_softnic related config
files.

Signed-off-by: Peng Yuan <yuan.peng@intel.com>

Comments

Tu, Lijuan Aug. 13, 2020, 3:05 a.m. UTC | #1
> Subject: [dts] [PATCH]test_plans: add port information change
> 
> add port information change to flow_classify_softnic related config files.
> 
> Signed-off-by: Peng Yuan <yuan.peng@intel.com>

Applied

Patch
diff mbox series

diff --git a/test_plans/flow_classify_softnic_test_plan.rst b/test_plans/flow_classify_softnic_test_plan.rst
index 34984e10..b18d32b6 100644
--- a/test_plans/flow_classify_softnic_test_plan.rst
+++ b/test_plans/flow_classify_softnic_test_plan.rst
@@ -40,7 +40,9 @@  The SoftNIC allows building custom NIC pipelines in SW. The Soft NIC pipeline is
 
 Prerequisites
 =============
-The DUT must have four 10G Ethernet ports connected to four ports on tester that are controlled by the Scapy packet generator::
+The DUT can have 4*10G Ethernet ports or 2*10G Ethernet ports.
+We design case with 4*10G Ethernet ports.
+The DUT have four 10G Ethernet ports connected to four ports on tester that are controlled by the Scapy packet generator::
 
     dut_port_0 <---> tester_port_0
     dut_port_1 <---> tester_port_1
@@ -59,6 +61,14 @@  Bind them to dpdk igb_uio driver::
     ./usertools/dpdk-devbind.py -b igb_uio 05:00.0 05:00.1 05:00.2 05:00.3
 
 Change ./drivers/net/softnic/firmware.cli to meet the specific test environment.
+Change ports info to your actual ports info::
+
+    link LINK0 dev 0000:05:00.0
+    link LINK1 dev 0000:05:00.1
+    link LINK2 dev 0000:05:00.2
+    link LINK3 dev 0000:05:00.3
+
+Other changes are shown in each case.
 
 Start softnic with following command line::