[1/5] net/ixgbe: remove ixgbe vector config flag
diff mbox series

Message ID 20200114112945.39375-2-reshma.pattan@intel.com
State Accepted, archived
Delegated to: xiaolong ye
Headers show
Series
  • net/ixgbe: improvements to ixgbe driver
Related show

Checks

Context Check Description
ci/iol-nxp-Performance success Performance Testing PASS
ci/iol-mellanox-Performance success Performance Testing PASS
ci/iol-testing success Testing PASS
ci/iol-intel-Performance success Performance Testing PASS
ci/Intel-compilation fail Compilation issues
ci/checkpatch success coding style OK

Commit Message

Reshma Pattan Jan. 14, 2020, 11:29 a.m. UTC
CONFIG_RTE_IXGBE_INC_VECTOR is enabled by default, so remove
it and use architecture specific flags.

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
---
 config/common_base             |  1 -
 doc/guides/nics/ixgbe.rst      |  1 -
 drivers/net/ixgbe/Makefile     |  6 +++---
 drivers/net/ixgbe/ixgbe_rxtx.c | 17 ++++++++---------
 drivers/net/ixgbe/ixgbe_rxtx.h |  9 ++++-----
 drivers/net/ixgbe/meson.build  |  1 -
 6 files changed, 15 insertions(+), 20 deletions(-)

Patch
diff mbox series

diff --git a/config/common_base b/config/common_base
index 7dec7ed45..999582b0a 100644
--- a/config/common_base
+++ b/config/common_base
@@ -295,7 +295,6 @@  CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
-CONFIG_RTE_IXGBE_INC_VECTOR=y
 CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
 
 #
diff --git a/doc/guides/nics/ixgbe.rst b/doc/guides/nics/ixgbe.rst
index 5c3a7e4f2..1f424b38a 100644
--- a/doc/guides/nics/ixgbe.rst
+++ b/doc/guides/nics/ixgbe.rst
@@ -15,7 +15,6 @@  There is no change to PMD API. The RX/TX handler are the only two entries for vP
 They are transparently registered at runtime RX/TX execution if all condition checks pass.
 
 1.  To date, only an SSE version of IX GBE vPMD is available.
-    To ensure that vPMD is in the binary code, ensure that the option CONFIG_RTE_IXGBE_INC_VECTOR=y is in the configure file.
 
 Some constraints apply as pre-conditions for specific optimizations on bulk packet transfers.
 The following sections explain RX and TX constraints in the vPMD.
diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile
index 85762e2f2..8b9d51f75 100644
--- a/drivers/net/ixgbe/Makefile
+++ b/drivers/net/ixgbe/Makefile
@@ -89,9 +89,9 @@  SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_fdir.c
 SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_pf.c
 SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_flow.c
 ifeq ($(CONFIG_RTE_ARCH_ARM64),y)
-SRCS-$(CONFIG_RTE_IXGBE_INC_VECTOR) += ixgbe_rxtx_vec_neon.c
-else
-SRCS-$(CONFIG_RTE_IXGBE_INC_VECTOR) += ixgbe_rxtx_vec_sse.c
+SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_rxtx_vec_neon.c
+else ifeq ($(CONFIG_RTE_ARCH_X86),y)
+SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_rxtx_vec_sse.c
 endif
 ifeq ($(CONFIG_RTE_LIBRTE_IXGBE_BYPASS),y)
 SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bypass.c
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index fa572d184..06617a47a 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -87,7 +87,7 @@ 
 #define rte_ixgbe_prefetch(p)   do {} while (0)
 #endif
 
-#ifdef RTE_IXGBE_INC_VECTOR
+#if defined(RTE_ARCH_X86) || defined(RTE_ARCH_ARM64)
 uint16_t ixgbe_xmit_fixed_burst_vec(void *tx_queue, struct rte_mbuf **tx_pkts,
 				    uint16_t nb_pkts);
 #endif
@@ -344,7 +344,7 @@  ixgbe_xmit_pkts_simple(void *tx_queue, struct rte_mbuf **tx_pkts,
 	return nb_tx;
 }
 
-#ifdef RTE_IXGBE_INC_VECTOR
+#if defined(RTE_ARCH_X86) || defined(RTE_ARCH_ARM64)
 static uint16_t
 ixgbe_xmit_pkts_vec(void *tx_queue, struct rte_mbuf **tx_pkts,
 		    uint16_t nb_pkts)
@@ -2392,7 +2392,7 @@  ixgbe_set_tx_function(struct rte_eth_dev *dev, struct ixgbe_tx_queue *txq)
 			(txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) {
 		PMD_INIT_LOG(DEBUG, "Using simple tx code path");
 		dev->tx_pkt_prepare = NULL;
-#ifdef RTE_IXGBE_INC_VECTOR
+#if defined(RTE_ARCH_X86) || defined(RTE_ARCH_ARM64)
 		if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ &&
 				(rte_eal_process_type() != RTE_PROC_PRIMARY ||
 					ixgbe_txq_vec_setup(txq) == 0)) {
@@ -2687,7 +2687,7 @@  ixgbe_rx_queue_release_mbufs(struct ixgbe_rx_queue *rxq)
 {
 	unsigned i;
 
-#ifdef RTE_IXGBE_INC_VECTOR
+#if defined(RTE_ARCH_X86) || defined(RTE_ARCH_ARM64)
 	/* SSE Vector driver has a different way of releasing mbufs. */
 	if (rxq->rx_using_sse) {
 		ixgbe_rx_queue_release_mbufs_vec(rxq);
@@ -2825,7 +2825,7 @@  ixgbe_reset_rx_queue(struct ixgbe_adapter *adapter, struct ixgbe_rx_queue *rxq)
 	rxq->pkt_first_seg = NULL;
 	rxq->pkt_last_seg = NULL;
 
-#ifdef RTE_IXGBE_INC_VECTOR
+#if defined(RTE_ARCH_X86) || defined(RTE_ARCH_ARM64)
 	rxq->rxrearm_start = 0;
 	rxq->rxrearm_nb = 0;
 #endif
@@ -3139,7 +3139,7 @@  ixgbe_dev_rx_descriptor_status(void *rx_queue, uint16_t offset)
 	if (unlikely(offset >= rxq->nb_rx_desc))
 		return -EINVAL;
 
-#ifdef RTE_IXGBE_INC_VECTOR
+#if defined(RTE_ARCH_X86) || defined(RTE_ARCH_ARM64)
 	if (rxq->rx_using_sse)
 		nb_hold = rxq->rxrearm_nb;
 	else
@@ -4638,8 +4638,7 @@  ixgbe_set_rx_function(struct rte_eth_dev *dev)
 	if (ixgbe_rx_vec_dev_conf_condition_check(dev) ||
 	    !adapter->rx_bulk_alloc_allowed) {
 		PMD_INIT_LOG(DEBUG, "Port[%d] doesn't meet Vector Rx "
-				    "preconditions or RTE_IXGBE_INC_VECTOR is "
-				    "not enabled",
+				    "preconditions",
 			     dev->data->port_id);
 
 		adapter->rx_vec_allowed = false;
@@ -5809,7 +5808,7 @@  ixgbe_config_rss_filter(struct rte_eth_dev *dev,
 	return 0;
 }
 
-/* Stubs needed for linkage when CONFIG_RTE_IXGBE_INC_VECTOR is set to 'n' */
+/* Stubs needed for linkage for ppc arch */
 __rte_weak int
 ixgbe_rx_vec_dev_conf_condition_check(struct rte_eth_dev __rte_unused *dev)
 {
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.h b/drivers/net/ixgbe/ixgbe_rxtx.h
index 505d344b9..5c9aa0f9d 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.h
+++ b/drivers/net/ixgbe/ixgbe_rxtx.h
@@ -33,7 +33,7 @@ 
 
 #define RTE_IXGBE_DESCS_PER_LOOP    4
 
-#ifdef RTE_IXGBE_INC_VECTOR
+#if defined(RTE_ARCH_X86) || defined(RTE_ARCH_ARM64)
 #define RTE_IXGBE_RXQ_REARM_THRESH      32
 #define RTE_IXGBE_MAX_RX_BURST          RTE_IXGBE_RXQ_REARM_THRESH
 #endif
@@ -115,7 +115,7 @@  struct ixgbe_rx_queue {
 	uint8_t            using_ipsec;
 	/**< indicates that IPsec RX feature is in use */
 #endif
-#ifdef RTE_IXGBE_INC_VECTOR
+#if defined(RTE_ARCH_X86) || defined(RTE_ARCH_ARM64)
 	uint16_t            rxrearm_nb;     /**< number of remaining to be re-armed */
 	uint16_t            rxrearm_start;  /**< the idx we start the re-arming from */
 #endif
@@ -288,12 +288,11 @@  void ixgbe_rx_queue_release_mbufs_vec(struct ixgbe_rx_queue *rxq);
 extern const uint32_t ptype_table[IXGBE_PACKET_TYPE_MAX];
 extern const uint32_t ptype_table_tn[IXGBE_PACKET_TYPE_TN_MAX];
 
-#ifdef RTE_IXGBE_INC_VECTOR
-
+#if defined(RTE_ARCH_X86) || defined(RTE_ARCH_ARM64)
 uint16_t ixgbe_xmit_fixed_burst_vec(void *tx_queue, struct rte_mbuf **tx_pkts,
 				    uint16_t nb_pkts);
 int ixgbe_txq_vec_setup(struct ixgbe_tx_queue *txq);
-#endif /* RTE_IXGBE_INC_VECTOR */
+#endif
 
 uint64_t ixgbe_get_tx_port_offloads(struct rte_eth_dev *dev);
 uint64_t ixgbe_get_rx_queue_offloads(struct rte_eth_dev *dev);
diff --git a/drivers/net/ixgbe/meson.build b/drivers/net/ixgbe/meson.build
index 1b0f6d1ef..6667af634 100644
--- a/drivers/net/ixgbe/meson.build
+++ b/drivers/net/ixgbe/meson.build
@@ -25,7 +25,6 @@  sources = files(
 deps += ['hash', 'security']
 
 if arch_subdir == 'x86'
-	dpdk_conf.set('RTE_IXGBE_INC_VECTOR', 1)
 	sources += files('ixgbe_rxtx_vec_sse.c')
 endif