@@ -35,6 +35,7 @@
#include <rte_ip.h>
#include <rte_tcp.h>
#include <rte_udp.h>
+#include <rte_vxlan.h>
#include <rte_sctp.h>
#include <rte_prefetch.h>
#include <rte_string_fns.h>
@@ -8,6 +8,7 @@
#include <rte_net.h>
#include <rte_mbuf.h>
#include <rte_ether.h>
+#include <rte_vxlan.h>
#include <rte_ethdev.h>
#include <rte_flow.h>
@@ -102,6 +102,7 @@ The public API headers are grouped by topics:
[frag/reass] (@ref rte_ip_frag.h),
[LPM IPv4 route] (@ref rte_lpm.h),
[LPM IPv6 route] (@ref rte_lpm6.h)
+ [VXLAN] (@ref rte_vxlan.h)
- **QoS**:
[metering] (@ref rte_meter.h),
@@ -6,6 +6,8 @@
#ifndef _ENIC_H_
#define _ENIC_H_
+#include <rte_vxlan.h>
+
#include "vnic_enet.h"
#include "vnic_dev.h"
#include "vnic_wq.h"
@@ -50,9 +52,6 @@
#define ENICPMD_FDIR_MAX 64
-/* HW default VXLAN port */
-#define ENIC_DEFAULT_VXLAN_PORT 4789
-
/*
* Interrupt 0: LSC and errors
* Interrupt 1: rx queue 0
@@ -1047,7 +1047,7 @@ static int enicpmd_dev_udp_tunnel_port_del(struct rte_eth_dev *eth_dev,
tnl->udp_port);
return -EINVAL;
}
- return update_vxlan_port(enic, ENIC_DEFAULT_VXLAN_PORT);
+ return update_vxlan_port(enic, RTE_VXLAN_DEFAULT_PORT);
}
static int enicpmd_dev_fw_version_get(struct rte_eth_dev *eth_dev,
@@ -1727,14 +1727,14 @@ static int enic_dev_init(struct enic *enic)
* enable/disable.
*/
if (enic->vxlan) {
- enic->vxlan_port = ENIC_DEFAULT_VXLAN_PORT;
+ enic->vxlan_port = RTE_VXLAN_DEFAULT_PORT;
/*
* Reset the vxlan port to the default, as the NIC firmware
* does not reset it automatically and keeps the old setting.
*/
if (vnic_dev_overlay_offload_cfg(enic->vdev,
OVERLAY_CFG_VXLAN_PORT_UPDATE,
- ENIC_DEFAULT_VXLAN_PORT)) {
+ RTE_VXLAN_DEFAULT_PORT)) {
dev_err(enic, "failed to update vxlan port\n");
return -EINVAL;
}
@@ -15,6 +15,7 @@
#include <rte_dev.h>
#include <rte_eal.h>
#include <rte_ether.h>
+#include <rte_vxlan.h>
#include <rte_ethdev_driver.h>
#include <rte_io.h>
#include <rte_ip.h>
@@ -12,7 +12,7 @@
#include <rte_log.h>
#include <rte_debug.h>
#include <rte_pci.h>
-#include <rte_ether.h>
+#include <rte_vxlan.h>
#include <rte_ethdev_driver.h>
#include <rte_malloc.h>
@@ -77,7 +77,6 @@
rte_memcpy((ipaddr), ipv6_addr, sizeof(ipv6_addr));\
} while (0)
-#define DEFAULT_VXLAN_PORT 4789
#define IXGBE_FDIRIP6M_INNER_MAC_SHIFT 4
static int fdir_erase_filter_82599(struct ixgbe_hw *hw, uint32_t fdirhash);
@@ -366,7 +365,7 @@ fdir_set_input_mask_x550(struct rte_eth_dev *dev)
/* set the default UDP port for VxLAN */
if (mode == RTE_FDIR_MODE_PERFECT_TUNNEL)
- IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, DEFAULT_VXLAN_PORT);
+ IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, RTE_VXLAN_DEFAULT_PORT);
/* some bits must be set for mac vlan or tunnel mode */
fdirm |= IXGBE_FDIRM_L4P | IXGBE_FDIRM_L3P;
@@ -7,6 +7,7 @@
#define RTE_PMD_MLX5_DEFS_H_
#include <rte_ethdev_driver.h>
+#include <rte_vxlan.h>
#include "mlx5_autoconf.h"
@@ -26,6 +26,7 @@
#include <rte_malloc.h>
#include <rte_ip.h>
#include <rte_gre.h>
+#include <rte_vxlan.h>
#include "mlx5.h"
#include "mlx5_defs.h"
@@ -159,7 +159,7 @@ decapsulation(struct rte_mbuf *pkt)
/** check udp destination port, 4789 is the default vxlan port
* (rfc7348) or that the rx offload flag is set (i40e only
* currently)*/
- if (udp_hdr->dst_port != rte_cpu_to_be_16(DEFAULT_VXLAN_PORT) &&
+ if (udp_hdr->dst_port != rte_cpu_to_be_16(RTE_VXLAN_DEFAULT_PORT) &&
(pkt->packet_type & RTE_PTYPE_TUNNEL_MASK) == 0)
return -1;
outer_header_len = info.outer_l2_len + info.outer_l3_len
@@ -7,6 +7,7 @@
#include <rte_ether.h>
#include <rte_ip.h>
+#include <rte_vxlan.h>
#define PORT_MIN 49152
#define PORT_MAX 65535
@@ -14,7 +15,6 @@
#define VXLAN_N_PORTS 2
#define VXLAN_HF_VNI 0x08000000
-#define DEFAULT_VXLAN_PORT 4789
extern struct rte_ipv4_hdr app_ip_hdr[VXLAN_N_PORTS];
extern struct rte_ether_hdr app_l2_hdr[VXLAN_N_PORTS];
@@ -7,6 +7,7 @@
#include <rte_ip.h>
#include <rte_tcp.h>
+#include <rte_vxlan.h>
#define INVALID_ARRAY_INDEX 0xffffffffUL
#define GRO_TCP4_TBL_MAX_ITEM_NUM (1024UL * 1024UL)
@@ -20,7 +20,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_NET) += rte_arp.c
# install includes
SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include := rte_ip.h rte_tcp.h rte_udp.h rte_esp.h
SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_sctp.h rte_icmp.h rte_arp.h
-SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_ether.h rte_gre.h rte_net.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_ether.h rte_gre.h rte_net.h rte_vxlan.h
SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_net_crc.h rte_mpls.h
include $(RTE_SDK)/mk/rte.lib.mk
@@ -11,6 +11,7 @@ headers = files('rte_ip.h',
'rte_icmp.h',
'rte_arp.h',
'rte_ether.h',
+ 'rte_vxlan.h',
'rte_gre.h',
'rte_net.h',
'rte_net_crc.h',
@@ -285,15 +285,7 @@ struct rte_vlan_hdr {
uint16_t eth_proto;/**< Ethernet type of encapsulated frame. */
} __attribute__((__packed__));
-/**
- * VXLAN protocol header.
- * Contains the 8-bit flag, 24-bit VXLAN Network Identifier and
- * Reserved fields (24 bits and 8 bits)
- */
-struct rte_vxlan_hdr {
- uint32_t vx_flags; /**< flag (8) + Reserved (24). */
- uint32_t vx_vni; /**< VNI (24) + Reserved (8). */
-} __attribute__((__packed__));
+
/* Ethernet frame types */
#define RTE_ETHER_TYPE_IPV4 0x0800 /**< IPv4 Protocol. */
@@ -313,35 +305,6 @@ struct rte_vxlan_hdr {
#define RTE_ETHER_TYPE_MPLS 0x8847 /**< MPLS ethertype. */
#define RTE_ETHER_TYPE_MPLSM 0x8848 /**< MPLS multicast ethertype. */
-#define RTE_ETHER_VXLAN_HLEN \
- (sizeof(struct rte_udp_hdr) + sizeof(struct rte_vxlan_hdr))
- /**< VXLAN tunnel header length. */
-
-/**
- * VXLAN-GPE protocol header (draft-ietf-nvo3-vxlan-gpe-05).
- * Contains the 8-bit flag, 8-bit next-protocol, 24-bit VXLAN Network
- * Identifier and Reserved fields (16 bits and 8 bits).
- */
-struct rte_vxlan_gpe_hdr {
- uint8_t vx_flags; /**< flag (8). */
- uint8_t reserved[2]; /**< Reserved (16). */
- uint8_t proto; /**< next-protocol (8). */
- uint32_t vx_vni; /**< VNI (24) + Reserved (8). */
-} __attribute__((__packed__));
-
-/* VXLAN-GPE next protocol types */
-#define RTE_VXLAN_GPE_TYPE_IPV4 1 /**< IPv4 Protocol. */
-#define RTE_VXLAN_GPE_TYPE_IPV6 2 /**< IPv6 Protocol. */
-#define RTE_VXLAN_GPE_TYPE_ETH 3 /**< Ethernet Protocol. */
-#define RTE_VXLAN_GPE_TYPE_NSH 4 /**< NSH Protocol. */
-#define RTE_VXLAN_GPE_TYPE_MPLS 5 /**< MPLS Protocol. */
-#define RTE_VXLAN_GPE_TYPE_GBP 6 /**< GBP Protocol. */
-#define RTE_VXLAN_GPE_TYPE_VBNG 7 /**< vBNG Protocol. */
-
-#define RTE_ETHER_VXLAN_GPE_HLEN (sizeof(struct rte_udp_hdr) + \
- sizeof(struct rte_vxlan_gpe_hdr))
-/**< VXLAN-GPE tunnel header length. */
-
/**
* Extract VLAN tag information into mbuf
*
new file mode 100644
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018-2019 Intel Corporation
+ */
+
+#ifndef _RTE_VXLAN_H_
+#define _RTE_VXLAN_H_
+
+/**
+ * @file
+ *
+ * VXLAN-related definitions
+ */
+
+#include <stdint.h>
+
+#include <rte_udp.h>
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** VXLAN default port. */
+#define RTE_VXLAN_DEFAULT_PORT 4789
+
+/**
+ * VXLAN protocol header.
+ * Contains the 8-bit flag, 24-bit VXLAN Network Identifier and
+ * Reserved fields (24 bits and 8 bits)
+ */
+struct rte_vxlan_hdr {
+ uint32_t vx_flags; /**< flag (8) + Reserved (24). */
+ uint32_t vx_vni; /**< VNI (24) + Reserved (8). */
+} __attribute__((__packed__));
+
+/** VXLAN tunnel header length. */
+#define RTE_ETHER_VXLAN_HLEN \
+ (sizeof(struct rte_udp_hdr) + sizeof(struct rte_vxlan_hdr))
+
+
+/**
+ * VXLAN-GPE protocol header (draft-ietf-nvo3-vxlan-gpe-05).
+ * Contains the 8-bit flag, 8-bit next-protocol, 24-bit VXLAN Network
+ * Identifier and Reserved fields (16 bits and 8 bits).
+ */
+struct rte_vxlan_gpe_hdr {
+ uint8_t vx_flags; /**< flag (8). */
+ uint8_t reserved[2]; /**< Reserved (16). */
+ uint8_t proto; /**< next-protocol (8). */
+ uint32_t vx_vni; /**< VNI (24) + Reserved (8). */
+} __attribute__((__packed__));
+
+/** VXLAN-GPE tunnel header length. */
+#define RTE_ETHER_VXLAN_GPE_HLEN (sizeof(struct rte_udp_hdr) + \
+ sizeof(struct rte_vxlan_gpe_hdr))
+
+/* VXLAN-GPE next protocol types */
+#define RTE_VXLAN_GPE_TYPE_IPV4 1 /**< IPv4 Protocol. */
+#define RTE_VXLAN_GPE_TYPE_IPV6 2 /**< IPv6 Protocol. */
+#define RTE_VXLAN_GPE_TYPE_ETH 3 /**< Ethernet Protocol. */
+#define RTE_VXLAN_GPE_TYPE_NSH 4 /**< NSH Protocol. */
+#define RTE_VXLAN_GPE_TYPE_MPLS 5 /**< MPLS Protocol. */
+#define RTE_VXLAN_GPE_TYPE_GBP 6 /**< GBP Protocol. */
+#define RTE_VXLAN_GPE_TYPE_VBNG 7 /**< vBNG Protocol. */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* RTE_VXLAN_H_ */
@@ -14,6 +14,7 @@
#include <rte_esp.h>
#include <rte_tcp.h>
#include <rte_udp.h>
+#include <rte_vxlan.h>
#include <rte_cryptodev.h>
#include <rte_cryptodev_pmd.h>