[19.11,V3,06/12] net/i40e: fix Tx descriptor status api

Message ID bedd3dedff373fcba3946a713c54f8826f2c7996.1565252336.git.thierry.herbelot@6wind.com
State New
Delegated to: Ferruh Yigit
Headers show
Series
  • Miscellaneous fixes
Related show

Checks

Context Check Description
ci/Intel-compilation fail Compilation issues
ci/checkpatch success coding style OK

Commit Message

Thierry Herbelot Aug. 8, 2019, 8:22 a.m.
From: Olivier Matz <olivier.matz@6wind.com>

The Tx descriptor status api was not behaving as expected. This API is
used to inspect the content of the descriptors in the Tx ring to
determine the length of the Tx queue.

Since the software advances the tail pointer and the hardware advances
the head pointer, the Tx queue is located before txq->tx_tail in the
ring. Therefore, a call to rte_eth_tx_descriptor_status(..., offset=20)
should inspect the 20th descriptor before the tail, not after.

As before, we still need to take care about only checking descriptors
that have the RS bit.

Additionally, we can avoid an access to the ring if offset is greater or
equal to nb_tx_desc - nb_tx_free.

Fixes: a9dd9af6f38e ("net/i40e: implement descriptor status API")
Cc: stable@dpdk.org

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
---
 drivers/net/i40e/i40e_rxtx.c | 37 +++++++++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 10 deletions(-)

Patch

diff --git a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c
index 692c3bab4b5f..d84a97732f1e 100644
--- a/drivers/net/i40e/i40e_rxtx.c
+++ b/drivers/net/i40e/i40e_rxtx.c
@@ -2031,22 +2031,39 @@  i40e_dev_tx_descriptor_status(void *tx_queue, uint16_t offset)
 	struct i40e_tx_queue *txq = tx_queue;
 	volatile uint64_t *status;
 	uint64_t mask, expect;
-	uint32_t desc;
+	int32_t desc, dd;
 
 	if (unlikely(offset >= txq->nb_tx_desc))
 		return -EINVAL;
+	if (offset >= txq->nb_tx_desc - txq->nb_tx_free)
+		return RTE_ETH_TX_DESC_DONE;
+
+	desc = txq->tx_tail - offset - 1;
+	if (desc < 0)
+		desc += txq->nb_tx_desc;
 
-	desc = txq->tx_tail + offset;
-	/* go to next desc that has the RS bit */
-	desc = ((desc + txq->tx_rs_thresh - 1) / txq->tx_rs_thresh) *
-		txq->tx_rs_thresh;
-	if (desc >= txq->nb_tx_desc) {
-		desc -= txq->nb_tx_desc;
-		if (desc >= txq->nb_tx_desc)
-			desc -= txq->nb_tx_desc;
+	/* offset is too small, no other way than reading PCI reg */
+	if (unlikely(offset < txq->tx_rs_thresh)) {
+		int16_t tx_head, queue_size;
+		tx_head = I40E_READ_REG(I40E_VSI_TO_HW(txq->vsi),
+					I40E_QTX_HEAD(txq->reg_idx));
+		queue_size = txq->tx_tail - tx_head;
+		if (queue_size < 0)
+			queue_size += txq->nb_tx_desc;
+		return queue_size > offset ? RTE_ETH_TX_DESC_FULL :
+			RTE_ETH_TX_DESC_DONE;
 	}
 
-	status = &txq->tx_ring[desc].cmd_type_offset_bsz;
+	/* index of the dd bit to look at */
+	dd = (desc / txq->tx_rs_thresh + 1) * txq->tx_rs_thresh - 1;
+
+	/* In full featured mode, RS bit is only set in the last descriptor */
+	/* of a multisegments packet */
+	if (!(txq->offloads == 0 &&
+	      txq->tx_rs_thresh >= RTE_PMD_I40E_TX_MAX_BURST))
+		dd = txq->sw_ring[dd].last_id;
+
+	status = &txq->tx_ring[dd].cmd_type_offset_bsz;
 	mask = rte_le_to_cpu_64(I40E_TXD_QW1_DTYPE_MASK);
 	expect = rte_cpu_to_le_64(
 		I40E_TX_DESC_DTYPE_DESC_DONE << I40E_TXD_QW1_DTYPE_SHIFT);