[v2,03/15] net/enic: do not overwrite admin Tx queue limit
diff mbox series

Message ID 20180629092944.15576-4-johndale@cisco.com
State Accepted, archived
Delegated to: Ferruh Yigit
Headers show
Series
  • enic PMD fixes and performance improvements
Related show

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel-compilation success Compilation OK

Commit Message

John Daley June 29, 2018, 9:29 a.m. UTC
From: Hyong Youb Kim <hyonkim@cisco.com>

Currently, enic_alloc_wq (via rte_eth_tx_queue_setup) may overwrite
the admin limit with a lower value. This is wrong as seen in the
following sequence.

1. UCS admin-set Tx queue limit (config.wq_desc_count) = 4096
2. Set up tx queue with 512 descriptors
   The admin limit (config.wq_desc_count) becomes 512.
3. Stop ports and now set up Tx queue with 1024 descriptors.
   This fails because 1024 is greater than the admin limit (512).

Do not modify the admin limit, and when queried, report the current
number of descriptors instead of the admin limit. The rx queue setup
(enic_alloc_rq) does not this problem.

Fixes: fefed3d1e62c ("enic: new driver")

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
---
 drivers/net/enic/enic_ethdev.c |  5 +++--
 drivers/net/enic/enic_main.c   | 30 ++++++++++++++----------------
 2 files changed, 17 insertions(+), 18 deletions(-)

Patch
diff mbox series

diff --git a/drivers/net/enic/enic_ethdev.c b/drivers/net/enic/enic_ethdev.c
index 286308924..6ebad8d96 100644
--- a/drivers/net/enic/enic_ethdev.c
+++ b/drivers/net/enic/enic_ethdev.c
@@ -731,13 +731,14 @@  static void enicpmd_dev_rxq_info_get(struct rte_eth_dev *dev,
 }
 
 static void enicpmd_dev_txq_info_get(struct rte_eth_dev *dev,
-				     __rte_unused uint16_t tx_queue_id,
+				     uint16_t tx_queue_id,
 				     struct rte_eth_txq_info *qinfo)
 {
 	struct enic *enic = pmd_priv(dev);
+	struct vnic_wq *wq = &enic->wq[tx_queue_id];
 
 	ENICPMD_FUNC_TRACE();
-	qinfo->nb_desc = enic->config.wq_desc_count;
+	qinfo->nb_desc = wq->ring.desc_count;
 	memset(&qinfo->conf, 0, sizeof(qinfo->conf));
 	qinfo->conf.offloads = enic->tx_offload_capa;
 	/* tx_thresh, and all the other fields are not applicable for enic */
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 899603fa7..aba2ff5a7 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -869,25 +869,23 @@  int enic_alloc_wq(struct enic *enic, uint16_t queue_idx,
 	static int instance;
 
 	wq->socket_id = socket_id;
-	if (nb_desc) {
-		if (nb_desc > enic->config.wq_desc_count) {
-			dev_warning(enic,
-				"WQ %d - number of tx desc in cmd line (%d)"\
-				"is greater than that in the UCSM/CIMC adapter"\
-				"policy.  Applying the value in the adapter "\
-				"policy (%d)\n",
-				queue_idx, nb_desc, enic->config.wq_desc_count);
-		} else if (nb_desc != enic->config.wq_desc_count) {
-			enic->config.wq_desc_count = nb_desc;
-			dev_info(enic,
-				"TX Queues - effective number of descs:%d\n",
-				nb_desc);
-		}
+	if (nb_desc > enic->config.wq_desc_count) {
+		dev_warning(enic,
+			    "WQ %d - number of tx desc in cmd line (%d) "
+			    "is greater than that in the UCSM/CIMC adapter "
+			    "policy.  Applying the value in the adapter "
+			    "policy (%d)\n",
+			    queue_idx, nb_desc, enic->config.wq_desc_count);
+		nb_desc = enic->config.wq_desc_count;
+	} else if (nb_desc != enic->config.wq_desc_count) {
+		dev_info(enic,
+			 "TX Queues - effective number of descs:%d\n",
+			 nb_desc);
 	}
 
 	/* Allocate queue resources */
 	err = vnic_wq_alloc(enic->vdev, &enic->wq[queue_idx], queue_idx,
-		enic->config.wq_desc_count,
+		nb_desc,
 		sizeof(struct wq_enet_desc));
 	if (err) {
 		dev_err(enic, "error in allocation of wq\n");
@@ -895,7 +893,7 @@  int enic_alloc_wq(struct enic *enic, uint16_t queue_idx,
 	}
 
 	err = vnic_cq_alloc(enic->vdev, &enic->cq[cq_index], cq_index,
-		socket_id, enic->config.wq_desc_count,
+		socket_id, nb_desc,
 		sizeof(struct cq_enet_wq_desc));
 	if (err) {
 		vnic_wq_free(wq);