Message ID | 1525870039-11261-2-git-send-email-wisamm@mellanox.com |
---|---|
State | New, archived |
Delegated to: | Thomas Monjalon |
Headers | show |
Context | Check | Description |
---|---|---|
ci/checkpatch | success | coding style OK |
ci/Intel-compilation | success | Compilation OK |
Hi Wisam, > -----Original Message----- > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wisam Jaddo > Sent: Wednesday, May 9, 2018 1:47 PM > To: Wu, Jingjing <jingjing.wu@intel.com>; Lu, Wenzhuo > <wenzhuo.lu@intel.com>; thomas@monjalon.net > Cc: rasland@mellanox.com; dev@dpdk.org; shahafs@mellanox.com; > wisamm@mellanox.com > Subject: [dpdk-dev] [PATCH v3 1/2] app/testpmd: add custom topology > command > > Set custom topology for forwading packets by making the given two ports as > pair, in custom topology the active ports will be the defiend in custum-topo > only. > > This command will be useful in testing, when special topology is needed. > > usage: > testpmd> set custom-topo (port_id_1) (port_id_2) > > Signed-off-by: Wisam Jaddo <wisamm@mellanox.com> > --- > app/test-pmd/cmdline.c | 49 > +++++++++++++++++++++++++++++ > app/test-pmd/config.c | 41 ++++++++++++++++++++++++ > app/test-pmd/parameters.c | 6 ++-- > app/test-pmd/testpmd.h | 8 ++++- > doc/guides/testpmd_app_ug/testpmd_funcs.rst | 8 +++++ > 5 files changed, 109 insertions(+), 3 deletions(-) > > diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index > 9615670..9d48048 100644 > --- a/app/test-pmd/cmdline.c > +++ b/app/test-pmd/cmdline.c > @@ -466,6 +466,9 @@ static void cmd_help_long_parsed(void > *parsed_result, > "set eth-peer (port_id) (peer_addr)\n" > " set the peer address for certain port.\n\n" > > + "set custom-topo (port_id_1) (port_id_2)\n" > + " set custom topo.\n\n" > + > "set port (port_id) uta (mac_address|all) (on|off)\n" > " Add/Remove a or all unicast hash filter(s)" > "from port X.\n\n" > @@ -7649,6 +7652,51 @@ cmdline_parse_inst_t cmd_set_fwd_eth_peer = { > }, > }; > > +/* *** SET CUSTOM TOPO FOR CERTAIN PORT *** */ struct > +cmd_custom_topo_result { > + cmdline_fixed_string_t set; > + cmdline_fixed_string_t custom_topo; > + portid_t port_id_1; > + portid_t port_id_2; > +}; > + > +static void cmd_set_custom_topo_parsed(void *parsed_result, > + __attribute__((unused)) struct cmdline *cl, > + __attribute__((unused)) void *data) { > + struct cmd_custom_topo_result *res = parsed_result; > + > + if (test_done == 0) { > + printf("Please stop forwarding first\n"); > + return; > + } > + if (!strcmp(res->custom_topo, "custom-topo")) { > + set_custom_topo(res->port_id_1, res->port_id_2); > + fwd_config_setup(); > + } > +} > +cmdline_parse_token_string_t cmd_set_custom_topo_set = > + TOKEN_STRING_INITIALIZER(struct cmd_custom_topo_result, set, > "set"); > +cmdline_parse_token_string_t cmd_set_custom_topo_custom_topo = > + TOKEN_STRING_INITIALIZER(struct cmd_custom_topo_result, > custom_topo, > +"custom-topo"); cmdline_parse_token_num_t > cmd_set_custom_topo_port_id_1 = > + TOKEN_NUM_INITIALIZER(struct cmd_custom_topo_result, > port_id_1, > +UINT16); cmdline_parse_token_num_t cmd_set_custom_topo_port_id_2 > = > + TOKEN_NUM_INITIALIZER(struct cmd_custom_topo_result, > port_id_2, > +UINT16); > + > +cmdline_parse_inst_t cmd_set_custom_topo = { > + .f = cmd_set_custom_topo_parsed, > + .data = NULL, > + .help_str = "set custom-topo (port_id_1) (port_id_2)", > + .tokens = { > + (void *)&cmd_set_custom_topo_set, > + (void *)&cmd_set_custom_topo_custom_topo, > + (void *)&cmd_set_custom_topo_port_id_1, > + (void *)&cmd_set_custom_topo_port_id_2, > + NULL, > + }, > +}; > + > /* *** CONFIGURE QUEUE STATS COUNTER MAPPINGS *** */ struct > cmd_set_qmap_result { > cmdline_fixed_string_t set; > @@ -16540,6 +16588,7 @@ cmdline_parse_ctx_t main_ctx[] = { > (cmdline_parse_inst_t *)&cmd_stop, > (cmdline_parse_inst_t *)&cmd_mac_addr, > (cmdline_parse_inst_t *)&cmd_set_fwd_eth_peer, > + (cmdline_parse_inst_t *)&cmd_set_custom_topo, > (cmdline_parse_inst_t *)&cmd_set_qmap, > (cmdline_parse_inst_t *)&cmd_set_xstats_hide_zero, > (cmdline_parse_inst_t *)&cmd_operate_port, diff --git a/app/test- > pmd/config.c b/app/test-pmd/config.c index 16fc481..23799ad 100644 > --- a/app/test-pmd/config.c > +++ b/app/test-pmd/config.c > @@ -2069,6 +2069,8 @@ fwd_topology_tx_port_get(portid_t rxp) > return (rxp + 1) % cur_fwd_config.nb_fwd_ports; > case PORT_TOPOLOGY_LOOP: > return rxp; > + case PORT_TOPOLOGY_CUSTOM: > + return fwd_streams[rxp]->tx_port; > } > } > > @@ -2378,6 +2380,45 @@ set_fwd_eth_peer(portid_t port_id, char > *peer_addr) > new_peer_addr[c]; > } > > +static void > +print_ports_range(void) > +{ > + portid_t pid; > + printf("Valid port range is ["); > + RTE_ETH_FOREACH_DEV(pid) > + printf(", %d", pid); > + printf("]\n"); > +} > + > +void > +set_custom_topo(portid_t port_id_1, portid_t port_id_2) { > + unsigned int portlist[RTE_MAX_ETHPORTS]; > + unsigned int i; > + unsigned int nb_pt = 0; > + if (port_topology != PORT_TOPOLOGY_CUSTOM) { > + printf("Please set the forward topology to custom first.\n"); > + return; > + } > + if (port_id_is_invalid(port_id_1, ENABLED_WARN)) { > + print_ports_range(); > + return; > + } > + if (port_id_is_invalid(port_id_2, ENABLED_WARN)) { > + print_ports_range(); > + return; > + } > + fwd_streams[port_id_1]->tx_port = port_id_2; > + fwd_streams[port_id_2]->tx_port = port_id_1; > + fwd_ports[port_id_1] = port_id_1; > + fwd_ports[port_id_2] = port_id_2; > + > + for (i = 0; i < RTE_MAX_ETHPORTS; i++) > + if (fwd_ports[i] == i) > + portlist[nb_pt++] = i; > + set_fwd_ports_list(portlist, nb_pt); > +} > + > int > set_fwd_lcores_list(unsigned int *lcorelist, unsigned int nb_lc) { diff --git > a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index > aea8af8..0db411d 100644 > --- a/app/test-pmd/parameters.c > +++ b/app/test-pmd/parameters.c > @@ -139,8 +139,8 @@ usage(char* progname) > printf(" --enable-hw-vlan-extend: enable hardware vlan > extend.\n"); > printf(" --enable-drop-en: enable per queue packet drop.\n"); > printf(" --disable-rss: disable rss.\n"); > - printf(" --port-topology=N: set port topology (N: paired (default) or " > - "chained).\n"); > + printf(" --port-topology=N: set port topology (N: paired (default)" > + "(loop), (custom) or (chained).\n"); > printf(" --forward-mode=N: set forwarding mode (N: %s).\n", > list_pkt_forwarding_modes()); > printf(" --rss-ip: set RSS functions to IPv4/IPv6 only .\n"); @@ -920,6 > +920,8 @@ launch_args_parse(int argc, char** argv) > port_topology = > PORT_TOPOLOGY_CHAINED; > else if (!strcmp(optarg, "loop")) > port_topology = > PORT_TOPOLOGY_LOOP; > + else if (!strcmp(optarg, "custom")) > + port_topology = > PORT_TOPOLOGY_CUSTOM; > else > rte_exit(EXIT_FAILURE, "port- > topology %s invalid -" > " must be: paired, chained or > loop\n", diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h > index 1af87b8..3250683 100644 > --- a/app/test-pmd/testpmd.h > +++ b/app/test-pmd/testpmd.h > @@ -67,6 +67,7 @@ enum { > PORT_TOPOLOGY_PAIRED, > PORT_TOPOLOGY_CHAINED, > PORT_TOPOLOGY_LOOP, > + PORT_TOPOLOGY_CUSTOM, > }; > > #ifdef RTE_TEST_PMD_RECORD_BURST_STATS > @@ -363,6 +364,11 @@ extern uint8_t txring_numa[RTE_MAX_ETHPORTS]; > extern uint8_t socket_num; > > /* > + * Store the custom topo. > + */ > +portid_t fwd_ports[RTE_MAX_ETHPORTS]; > + > +/* > * Configuration of logical cores: > * nb_fwd_lcores <= nb_cfg_lcores <= nb_lcores > */ > @@ -598,7 +604,7 @@ void reconfig(portid_t new_port_id, unsigned > socket_id); int init_fwd_streams(void); > > void set_fwd_eth_peer(portid_t port_id, char *peer_addr); > - > +void set_custom_topo(portid_t port_id_1, portid_t port_id_2); > void port_mtu_set(portid_t port_id, uint16_t mtu); void > port_reg_bit_display(portid_t port_id, uint32_t reg_off, uint8_t bit_pos); > void port_reg_bit_set(portid_t port_id, uint32_t reg_off, uint8_t bit_pos, > diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst > b/doc/guides/testpmd_app_ug/testpmd_funcs.rst > index 013a405..5edf210 100644 > --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst > +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst > @@ -1090,6 +1090,14 @@ Set the forwarding peer address for certain port:: > > This is equivalent to the ``--eth-peer`` command-line option. > > +set custom-topo > +~~~~~~~~~~~~~~ > + > +Set custom topology for forwading packets by making the given two ports > as pair. > +In custom topology the active ports will be the defiend in custum-topo > only:: > + > + testpmd> set custom-topo (port_id_1) (port_id_2) > + > set port-uta > ~~~~~~~~~~~~ > > -- > 2.7.4
Hi Wisam, > -----Original Message----- > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wisam Jaddo > Sent: Wednesday, May 9, 2018 1:47 PM > To: Wu, Jingjing <jingjing.wu@intel.com>; Lu, Wenzhuo > <wenzhuo.lu@intel.com>; thomas@monjalon.net > Cc: rasland@mellanox.com; dev@dpdk.org; shahafs@mellanox.com; > wisamm@mellanox.com > Subject: [dpdk-dev] [PATCH v3 1/2] app/testpmd: add custom topology > command > > Set custom topology for forwading packets by making the given two ports as > pair, in custom topology the active ports will be the defiend in custum-topo > only. > > This command will be useful in testing, when special topology is needed. > > usage: > testpmd> set custom-topo (port_id_1) (port_id_2) > > Signed-off-by: Wisam Jaddo <wisamm@mellanox.com> > --- <snip> This patch fails to apply to dpdk 18.08-rc0 and needs to be rebased. checkpatch.pl is reporting 4 warnings which should be fixed. Regards, Bernard.
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index 9615670..9d48048 100644 --- a/app/test-pmd/cmdline.c +++ b/app/test-pmd/cmdline.c @@ -466,6 +466,9 @@ static void cmd_help_long_parsed(void *parsed_result, "set eth-peer (port_id) (peer_addr)\n" " set the peer address for certain port.\n\n" + "set custom-topo (port_id_1) (port_id_2)\n" + " set custom topo.\n\n" + "set port (port_id) uta (mac_address|all) (on|off)\n" " Add/Remove a or all unicast hash filter(s)" "from port X.\n\n" @@ -7649,6 +7652,51 @@ cmdline_parse_inst_t cmd_set_fwd_eth_peer = { }, }; +/* *** SET CUSTOM TOPO FOR CERTAIN PORT *** */ +struct cmd_custom_topo_result { + cmdline_fixed_string_t set; + cmdline_fixed_string_t custom_topo; + portid_t port_id_1; + portid_t port_id_2; +}; + +static void cmd_set_custom_topo_parsed(void *parsed_result, + __attribute__((unused)) struct cmdline *cl, + __attribute__((unused)) void *data) +{ + struct cmd_custom_topo_result *res = parsed_result; + + if (test_done == 0) { + printf("Please stop forwarding first\n"); + return; + } + if (!strcmp(res->custom_topo, "custom-topo")) { + set_custom_topo(res->port_id_1, res->port_id_2); + fwd_config_setup(); + } +} +cmdline_parse_token_string_t cmd_set_custom_topo_set = + TOKEN_STRING_INITIALIZER(struct cmd_custom_topo_result, set, "set"); +cmdline_parse_token_string_t cmd_set_custom_topo_custom_topo = + TOKEN_STRING_INITIALIZER(struct cmd_custom_topo_result, custom_topo, "custom-topo"); +cmdline_parse_token_num_t cmd_set_custom_topo_port_id_1 = + TOKEN_NUM_INITIALIZER(struct cmd_custom_topo_result, port_id_1, UINT16); +cmdline_parse_token_num_t cmd_set_custom_topo_port_id_2 = + TOKEN_NUM_INITIALIZER(struct cmd_custom_topo_result, port_id_2, UINT16); + +cmdline_parse_inst_t cmd_set_custom_topo = { + .f = cmd_set_custom_topo_parsed, + .data = NULL, + .help_str = "set custom-topo (port_id_1) (port_id_2)", + .tokens = { + (void *)&cmd_set_custom_topo_set, + (void *)&cmd_set_custom_topo_custom_topo, + (void *)&cmd_set_custom_topo_port_id_1, + (void *)&cmd_set_custom_topo_port_id_2, + NULL, + }, +}; + /* *** CONFIGURE QUEUE STATS COUNTER MAPPINGS *** */ struct cmd_set_qmap_result { cmdline_fixed_string_t set; @@ -16540,6 +16588,7 @@ cmdline_parse_ctx_t main_ctx[] = { (cmdline_parse_inst_t *)&cmd_stop, (cmdline_parse_inst_t *)&cmd_mac_addr, (cmdline_parse_inst_t *)&cmd_set_fwd_eth_peer, + (cmdline_parse_inst_t *)&cmd_set_custom_topo, (cmdline_parse_inst_t *)&cmd_set_qmap, (cmdline_parse_inst_t *)&cmd_set_xstats_hide_zero, (cmdline_parse_inst_t *)&cmd_operate_port, diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index 16fc481..23799ad 100644 --- a/app/test-pmd/config.c +++ b/app/test-pmd/config.c @@ -2069,6 +2069,8 @@ fwd_topology_tx_port_get(portid_t rxp) return (rxp + 1) % cur_fwd_config.nb_fwd_ports; case PORT_TOPOLOGY_LOOP: return rxp; + case PORT_TOPOLOGY_CUSTOM: + return fwd_streams[rxp]->tx_port; } } @@ -2378,6 +2380,45 @@ set_fwd_eth_peer(portid_t port_id, char *peer_addr) new_peer_addr[c]; } +static void +print_ports_range(void) +{ + portid_t pid; + printf("Valid port range is ["); + RTE_ETH_FOREACH_DEV(pid) + printf(", %d", pid); + printf("]\n"); +} + +void +set_custom_topo(portid_t port_id_1, portid_t port_id_2) +{ + unsigned int portlist[RTE_MAX_ETHPORTS]; + unsigned int i; + unsigned int nb_pt = 0; + if (port_topology != PORT_TOPOLOGY_CUSTOM) { + printf("Please set the forward topology to custom first.\n"); + return; + } + if (port_id_is_invalid(port_id_1, ENABLED_WARN)) { + print_ports_range(); + return; + } + if (port_id_is_invalid(port_id_2, ENABLED_WARN)) { + print_ports_range(); + return; + } + fwd_streams[port_id_1]->tx_port = port_id_2; + fwd_streams[port_id_2]->tx_port = port_id_1; + fwd_ports[port_id_1] = port_id_1; + fwd_ports[port_id_2] = port_id_2; + + for (i = 0; i < RTE_MAX_ETHPORTS; i++) + if (fwd_ports[i] == i) + portlist[nb_pt++] = i; + set_fwd_ports_list(portlist, nb_pt); +} + int set_fwd_lcores_list(unsigned int *lcorelist, unsigned int nb_lc) { diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index aea8af8..0db411d 100644 --- a/app/test-pmd/parameters.c +++ b/app/test-pmd/parameters.c @@ -139,8 +139,8 @@ usage(char* progname) printf(" --enable-hw-vlan-extend: enable hardware vlan extend.\n"); printf(" --enable-drop-en: enable per queue packet drop.\n"); printf(" --disable-rss: disable rss.\n"); - printf(" --port-topology=N: set port topology (N: paired (default) or " - "chained).\n"); + printf(" --port-topology=N: set port topology (N: paired (default)" + "(loop), (custom) or (chained).\n"); printf(" --forward-mode=N: set forwarding mode (N: %s).\n", list_pkt_forwarding_modes()); printf(" --rss-ip: set RSS functions to IPv4/IPv6 only .\n"); @@ -920,6 +920,8 @@ launch_args_parse(int argc, char** argv) port_topology = PORT_TOPOLOGY_CHAINED; else if (!strcmp(optarg, "loop")) port_topology = PORT_TOPOLOGY_LOOP; + else if (!strcmp(optarg, "custom")) + port_topology = PORT_TOPOLOGY_CUSTOM; else rte_exit(EXIT_FAILURE, "port-topology %s invalid -" " must be: paired, chained or loop\n", diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index 1af87b8..3250683 100644 --- a/app/test-pmd/testpmd.h +++ b/app/test-pmd/testpmd.h @@ -67,6 +67,7 @@ enum { PORT_TOPOLOGY_PAIRED, PORT_TOPOLOGY_CHAINED, PORT_TOPOLOGY_LOOP, + PORT_TOPOLOGY_CUSTOM, }; #ifdef RTE_TEST_PMD_RECORD_BURST_STATS @@ -363,6 +364,11 @@ extern uint8_t txring_numa[RTE_MAX_ETHPORTS]; extern uint8_t socket_num; /* + * Store the custom topo. + */ +portid_t fwd_ports[RTE_MAX_ETHPORTS]; + +/* * Configuration of logical cores: * nb_fwd_lcores <= nb_cfg_lcores <= nb_lcores */ @@ -598,7 +604,7 @@ void reconfig(portid_t new_port_id, unsigned socket_id); int init_fwd_streams(void); void set_fwd_eth_peer(portid_t port_id, char *peer_addr); - +void set_custom_topo(portid_t port_id_1, portid_t port_id_2); void port_mtu_set(portid_t port_id, uint16_t mtu); void port_reg_bit_display(portid_t port_id, uint32_t reg_off, uint8_t bit_pos); void port_reg_bit_set(portid_t port_id, uint32_t reg_off, uint8_t bit_pos, diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst index 013a405..5edf210 100644 --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst @@ -1090,6 +1090,14 @@ Set the forwarding peer address for certain port:: This is equivalent to the ``--eth-peer`` command-line option. +set custom-topo +~~~~~~~~~~~~~~ + +Set custom topology for forwading packets by making the given two ports as pair. +In custom topology the active ports will be the defiend in custum-topo only:: + + testpmd> set custom-topo (port_id_1) (port_id_2) + set port-uta ~~~~~~~~~~~~
Set custom topology for forwading packets by making the given two ports as pair, in custom topology the active ports will be the defiend in custum-topo only. This command will be useful in testing, when special topology is needed. usage: testpmd> set custom-topo (port_id_1) (port_id_2) Signed-off-by: Wisam Jaddo <wisamm@mellanox.com> --- app/test-pmd/cmdline.c | 49 +++++++++++++++++++++++++++++ app/test-pmd/config.c | 41 ++++++++++++++++++++++++ app/test-pmd/parameters.c | 6 ++-- app/test-pmd/testpmd.h | 8 ++++- doc/guides/testpmd_app_ug/testpmd_funcs.rst | 8 +++++ 5 files changed, 109 insertions(+), 3 deletions(-)