[dpdk-dev,7/7] build: add meson support for dpaaX platforms

Message ID 1519752352-15442-8-git-send-email-hemant.agrawal@nxp.com
State Superseded, archived
Headers show

Checks

Context Check Description
ci/Intel-compilation success Compilation OK
ci/checkpatch success coding style OK

Commit Message

Hemant Agrawal Feb. 27, 2018, 5:25 p.m.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
 app/test-pmd/meson.build             |  3 +++
 config/arm/arm64_dpaa2_linuxapp_gcc  | 13 +++++++++++++
 config/arm/arm64_dpaa_linuxapp_gcc   | 14 ++++++++++++++
 config/arm/meson.build               | 13 +++++++++++++
 drivers/bus/dpaa/meson.build         | 29 +++++++++++++++++++++++++++++
 drivers/bus/fslmc/meson.build        | 28 ++++++++++++++++++++++++++++
 drivers/bus/meson.build              |  4 ++--
 drivers/crypto/dpaa2_sec/meson.build | 16 ++++++++++++++++
 drivers/crypto/dpaa_sec/meson.build  | 16 ++++++++++++++++
 drivers/crypto/meson.build           |  3 +++
 drivers/event/dpaa/meson.build       | 11 +++++++++++
 drivers/event/dpaa2/meson.build      | 12 ++++++++++++
 drivers/event/meson.build            |  2 +-
 drivers/mempool/dpaa/meson.build     |  9 +++++++++
 drivers/mempool/dpaa2/meson.build    |  9 +++++++++
 drivers/mempool/meson.build          |  2 +-
 drivers/net/dpaa/meson.build         | 15 +++++++++++++++
 drivers/net/dpaa2/meson.build        | 16 ++++++++++++++++
 drivers/net/meson.build              |  2 +-
 19 files changed, 212 insertions(+), 5 deletions(-)
 create mode 100644 config/arm/arm64_dpaa2_linuxapp_gcc
 create mode 100644 config/arm/arm64_dpaa_linuxapp_gcc
 create mode 100644 drivers/bus/dpaa/meson.build
 create mode 100644 drivers/bus/fslmc/meson.build
 create mode 100644 drivers/crypto/dpaa2_sec/meson.build
 create mode 100644 drivers/crypto/dpaa_sec/meson.build
 create mode 100644 drivers/event/dpaa/meson.build
 create mode 100644 drivers/event/dpaa2/meson.build
 create mode 100644 drivers/mempool/dpaa/meson.build
 create mode 100644 drivers/mempool/dpaa2/meson.build
 create mode 100644 drivers/net/dpaa/meson.build
 create mode 100644 drivers/net/dpaa2/meson.build

Comments

Bruce Richardson Feb. 28, 2018, 2:44 p.m. | #1
On Tue, Feb 27, 2018 at 10:55:52PM +0530, Hemant Agrawal wrote:
> Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
> ---

Thanks for this. Some comments inline below.

/Bruce

>  app/test-pmd/meson.build             |  3 +++
>  config/arm/arm64_dpaa2_linuxapp_gcc  | 13 +++++++++++++
>  config/arm/arm64_dpaa_linuxapp_gcc   | 14 ++++++++++++++
>  config/arm/meson.build               | 13 +++++++++++++
>  drivers/bus/dpaa/meson.build         | 29 +++++++++++++++++++++++++++++
>  drivers/bus/fslmc/meson.build        | 28 ++++++++++++++++++++++++++++
>  drivers/bus/meson.build              |  4 ++--
>  drivers/crypto/dpaa2_sec/meson.build | 16 ++++++++++++++++
>  drivers/crypto/dpaa_sec/meson.build  | 16 ++++++++++++++++
>  drivers/crypto/meson.build           |  3 +++
>  drivers/event/dpaa/meson.build       | 11 +++++++++++
>  drivers/event/dpaa2/meson.build      | 12 ++++++++++++
>  drivers/event/meson.build            |  2 +-
>  drivers/mempool/dpaa/meson.build     |  9 +++++++++
>  drivers/mempool/dpaa2/meson.build    |  9 +++++++++
>  drivers/mempool/meson.build          |  2 +-
>  drivers/net/dpaa/meson.build         | 15 +++++++++++++++
>  drivers/net/dpaa2/meson.build        | 16 ++++++++++++++++
>  drivers/net/meson.build              |  2 +-
>  19 files changed, 212 insertions(+), 5 deletions(-)
>  create mode 100644 config/arm/arm64_dpaa2_linuxapp_gcc
>  create mode 100644 config/arm/arm64_dpaa_linuxapp_gcc
>  create mode 100644 drivers/bus/dpaa/meson.build
>  create mode 100644 drivers/bus/fslmc/meson.build
>  create mode 100644 drivers/crypto/dpaa2_sec/meson.build
>  create mode 100644 drivers/crypto/dpaa_sec/meson.build
>  create mode 100644 drivers/event/dpaa/meson.build
>  create mode 100644 drivers/event/dpaa2/meson.build
>  create mode 100644 drivers/mempool/dpaa/meson.build
>  create mode 100644 drivers/mempool/dpaa2/meson.build
>  create mode 100644 drivers/net/dpaa/meson.build
>  create mode 100644 drivers/net/dpaa2/meson.build
> 
> diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build
> index 7ed74db..83f8bb1 100644
> --- a/app/test-pmd/meson.build
> +++ b/app/test-pmd/meson.build
> @@ -32,6 +32,9 @@ if dpdk_conf.has('RTE_LIBRTE_SOFTNIC_PMD')
>  	sources += files('tm.c')
>  	deps += 'pmd_softnic'
>  endif
> +if dpdk_conf.has('RTE_LIBRTE_DPAA_PMD')
> +	deps += ['bus_dpaa', 'mempool_dpaa', 'pmd_dpaa']
> +endif
>  
>  dep_objs = []
>  foreach d:deps
> diff --git a/config/arm/arm64_dpaa2_linuxapp_gcc b/config/arm/arm64_dpaa2_linuxapp_gcc
> new file mode 100644
> index 0000000..87337fb
> --- /dev/null
> +++ b/config/arm/arm64_dpaa2_linuxapp_gcc
> @@ -0,0 +1,13 @@
> +[binaries]
> +c = 'aarch64-linux-gnu-gcc'
> +cpp = 'aarch64-linux-gnu-cpp'
> +ar = 'aarch64-linux-gnu-gcc-ar'
> +
> +[host_machine]
> +system = 'linux'
> +cpu_family = 'aarch64'
> +cpu = 'armv8-a'
> +endian = 'little'
> +
> +[properties]
> +implementor_id = 'dpaa2'
> diff --git a/config/arm/arm64_dpaa_linuxapp_gcc b/config/arm/arm64_dpaa_linuxapp_gcc
> new file mode 100644
> index 0000000..f769435
> --- /dev/null
> +++ b/config/arm/arm64_dpaa_linuxapp_gcc
> @@ -0,0 +1,14 @@
> +[binaries]
> +c = 'aarch64-linux-gnu-gcc'
> +cpp = 'aarch64-linux-gnu-cpp'
> +ar = 'aarch64-linux-gnu-gcc-ar'
> +strip = 'aarch64-linux-gnu-strip'
> +
> +[host_machine]
> +system = 'linux'
> +cpu_family = 'aarch64'
> +cpu = 'armv8-a'
> +endian = 'little'
> +
> +[properties]
> +implementor_id = 'dpaa'

Maybe separate the cross-build files out into a separate patch, since
they are pretty independent of the rest of the changes.

> diff --git a/config/arm/meson.build b/config/arm/meson.build
> index 4e788a4..c1ab6ed 100644
> --- a/config/arm/meson.build
> +++ b/config/arm/meson.build
> @@ -54,6 +54,17 @@ flags_cavium = [
>  	['RTE_MAX_LCORE', 96],
>  	['RTE_MAX_VFIO_GROUPS', 128],
>  	['RTE_RING_USE_C11_MEM_MODEL', false]]
> +flags_dpaa = [
> +	['RTE_MACHINE', '"dpaa"'],
> +	['RTE_CACHE_LINE_SIZE', 64],
> +	['RTE_MAX_NUMA_NODES', 1],
> +	['RTE_MAX_LCORE', 16]]
> +flags_dpaa2 = [
> +	['RTE_MACHINE', '"dpaa2"'],
> +	['RTE_CACHE_LINE_SIZE', 64],
> +	['RTE_MAX_NUMA_NODES', 1],
> +	['RTE_MAX_LCORE', 16],
> +	['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', 'n']]
>  
>  ## Arm implementer ID (ARM DDI 0487C.a, Section G7.2.106, Page G7-5321)
>  impl_generic = ['Generic armv8', flags_generic, machine_args_generic]
> @@ -69,6 +80,8 @@ impl_0x51 = ['Qualcomm', flags_generic, machine_args_generic]
>  impl_0x53 = ['Samsung', flags_generic, machine_args_generic]
>  impl_0x56 = ['Marvell', flags_generic, machine_args_generic]
>  impl_0x69 = ['Intel', flags_generic, machine_args_generic]
> +impl_dpaa = ['NXP DPAA', flags_dpaa, machine_args_generic]
> +impl_dpaa2 = ['NXP DPAA2', flags_dpaa2, machine_args_generic]
>  
>  
>  if cc.get_define('__clang__') != ''
> diff --git a/drivers/bus/dpaa/meson.build b/drivers/bus/dpaa/meson.build
> new file mode 100644
> index 0000000..c4257a5
> --- /dev/null
> +++ b/drivers/bus/dpaa/meson.build
> @@ -0,0 +1,29 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> +        build = false
> +endif
> +
> +deps += ['pci', 'ethdev', 'eventdev']
> +sources = files('dpaa_bus.c',
> +		'base/fman/fman.c',
> +		'base/fman/fman_hw.c',
> +		'base/fman/of.c',
> +		'base/fman/netcfg_layer.c',
> +		'base/qbman/process.c',
> +		'base/qbman/bman.c',
> +		'base/qbman/bman_driver.c',
> +		'base/qbman/qman.c',
> +		'base/qbman/qman_driver.c',
> +		'base/qbman/dpaa_alloc.c',
> +		'base/qbman/dpaa_sys.c')

Minor nit - try to keep all files and list entries in alphabetical
order.

> +
> +allow_experimental_apis = true
> +
> +if cc.has_argument('-Wno-cast-qual')
> +	cflags += '-Wno-cast-qual'
> +endif
> +
> +includes += include_directories('include', 'base/qbman')
> +cflags += ['-D_GNU_SOURCE']
> diff --git a/drivers/bus/fslmc/meson.build b/drivers/bus/fslmc/meson.build
> new file mode 100644
> index 0000000..87475ee
> --- /dev/null
> +++ b/drivers/bus/fslmc/meson.build
> @@ -0,0 +1,28 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> +        build = false
> +endif
> +
> +deps += ['eal', 'ethdev', 'eventdev']

Another minor nit - eal isn't strictly necessary here as both ethdev and
eventdev already depend on it, and dependencies are recursive.
Explicitly calling out all dependencies is not wrong, but in previous
prototyping I found that meson takes a lot longer to run when it has to
sort through all the dependency chains. That's why in other libs and
drivers I tried to keep the dependency lists to a minimum.
As well as this, EAL is a standard dependency, so it's already in the
deps array at this point.

> +sources = files('qbman/qbman_portal.c',
> +		'qbman/qbman_debug.c',
> +		'mc/dpmng.c',
> +		'mc/dpbp.c',
> +		'mc/dpio.c',
> +		'mc/mc_sys.c',
> +		'mc/dpcon.c',
> +		'mc/dpci.c',
> +		'portal/dpaa2_hw_dpio.c',
> +		'portal/dpaa2_hw_dpbp.c',
> +		'portal/dpaa2_hw_dpci.c',
> +		'fslmc_vfio.c',
> +		'fslmc_bus.c')
> +
> +allow_experimental_apis = true
> +
> +includes += include_directories('../../../lib/librte_eal/linuxapp/eal')

Is this not covered by the dependency on eal? Is it accessing things
directly in the EAL internals?

> +includes += include_directories('mc', 'qbman/include', 'portal')
> +dpdk_conf.set('CONFIG_RTE_ARCH_ARM_TUNE', 'cortex-a72')

This setting seems strange here? How is it used, and why set only inside
this particular driver?

> +cflags += ['-D_GNU_SOURCE']
> diff --git a/drivers/bus/meson.build b/drivers/bus/meson.build
> index c6af500..2187f6b 100644
> --- a/drivers/bus/meson.build
> +++ b/drivers/bus/meson.build
> @@ -1,7 +1,7 @@
>  # SPDX-License-Identifier: BSD-3-Clause
>  # Copyright(c) 2017 Intel Corporation
>  
> -drivers = ['pci', 'vdev']
> -std_deps = ['eal']
> +drivers = ['pci', 'vdev', 'fslmc', 'dpaa']

Please keep alphabetical order.

> +std_deps = ['eal', 'kvargs']

No big issue with this line change, but did you consider just making
kvargs a dependency of the fslmc and dpaa buses directly, rather than
making pci and vdev also depend on them?

>  config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
>  driver_name_fmt = 'rte_bus_@0@'
> diff --git a/drivers/crypto/dpaa2_sec/meson.build b/drivers/crypto/dpaa2_sec/meson.build
> new file mode 100644
> index 0000000..e80f15d
> --- /dev/null
> +++ b/drivers/crypto/dpaa2_sec/meson.build
> @@ -0,0 +1,16 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> +        build = false
> +endif
> +
> +deps += ['bus_fslmc', 'security', 'mempool_dpaa2']
> +sources = files('dpaa2_sec_dpseci.c',
> +		'mc/dpseci.c')
> +
> +allow_experimental_apis = true
> +
> +includes += include_directories('mc', 'hw')
> +dpdk_conf.set('RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS', 2048)

I don't think this should be set here. For other libs and drivers, the
constants are placed directly in config/rte_config.h (or put into a
header file inside the driver itself).

> +ext_deps += dep

This line should be removed. You haven't assigned a dependency object to
a variable called "dep" anywhere in this file.

> diff --git a/drivers/crypto/dpaa_sec/meson.build b/drivers/crypto/dpaa_sec/meson.build
> new file mode 100644
> index 0000000..10a7dd3
> --- /dev/null
> +++ b/drivers/crypto/dpaa_sec/meson.build
> @@ -0,0 +1,16 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> +        build = false
> +endif
> +
> +deps += ['bus_dpaa', 'security']
> +sources = files('dpaa_sec.c')
> +
> +allow_experimental_apis = true
> +
> +includes += include_directories('../dpaa2_sec/')
> +dpdk_conf.set('RTE_LIBRTE_DPAA_MAX_CRYPTODEV', 4)
> +dpdk_conf.set('RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS', 2048)

As with other constants, I think this should go directly into
rte_config.h, or in a header file in the driver directly.

> +ext_deps += dep

Drop this line.

> diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
> index 17041ad..a08bce5 100644
> --- a/drivers/crypto/meson.build
> +++ b/drivers/crypto/meson.build
> @@ -2,6 +2,9 @@
>  # Copyright(c) 2017 Intel Corporation
>  
>  drivers = ['qat', 'null', 'openssl']
> +
> +	drivers += ['dpaa_sec', 'dpaa2_sec']
> +

Don't indent.
In other lists, we just allow list to flow onto multiple lines, rather
than using +=. Using += is not wrong, it's just inconsistent, and again
will break alphabetical ordering in this case.

>  std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
>  config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
>  driver_name_fmt = 'rte_pmd_@0@'
> diff --git a/drivers/event/dpaa/meson.build b/drivers/event/dpaa/meson.build
> new file mode 100644
> index 0000000..0a26d5d
> --- /dev/null
> +++ b/drivers/event/dpaa/meson.build
> @@ -0,0 +1,11 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> +	build = false
> +endif
> +deps += ['mempool_dpaa', 'bus_dpaa', 'pmd_dpaa']
> +sources = files('dpaa_eventdev.c',
> +)

No need to move to a second line here.

> +
> +allow_experimental_apis = true
> diff --git a/drivers/event/dpaa2/meson.build b/drivers/event/dpaa2/meson.build
> new file mode 100644
> index 0000000..686b622
> --- /dev/null
> +++ b/drivers/event/dpaa2/meson.build
> @@ -0,0 +1,12 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> +	build = false
> +endif
> +deps += ['mempool_dpaa2', 'bus_fslmc', 'bus_vdev', 'pmd_dpaa2']
> +sources = files('dpaa2_hw_dpcon.c',
> +		'dpaa2_eventdev.c'
> +)
> +
> +allow_experimental_apis = true
> diff --git a/drivers/event/meson.build b/drivers/event/meson.build
> index d7bc485..f1c3678 100644
> --- a/drivers/event/meson.build
> +++ b/drivers/event/meson.build
> @@ -1,7 +1,7 @@
>  # SPDX-License-Identifier: BSD-3-Clause
>  # Copyright(c) 2017 Intel Corporation
>  
> -drivers = ['skeleton', 'sw', 'octeontx']
> +drivers = ['skeleton', 'sw', 'octeontx', 'dpaa', 'dpaa2']

alphabetically ordering, please.

>  std_deps = ['eventdev', 'kvargs']
>  config_flag_fmt = 'RTE_LIBRTE_@0@_EVENTDEV_PMD'
>  driver_name_fmt = 'rte_pmd_@0@_event'
> diff --git a/drivers/mempool/dpaa/meson.build b/drivers/mempool/dpaa/meson.build
> new file mode 100644
> index 0000000..08423c2
> --- /dev/null
> +++ b/drivers/mempool/dpaa/meson.build
> @@ -0,0 +1,9 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> +        build = false
> +endif
> +
> +deps += ['bus_dpaa']
> +sources = files('dpaa_mempool.c')
> diff --git a/drivers/mempool/dpaa2/meson.build b/drivers/mempool/dpaa2/meson.build
> new file mode 100644
> index 0000000..402d087
> --- /dev/null
> +++ b/drivers/mempool/dpaa2/meson.build
> @@ -0,0 +1,9 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> +        build = false
> +endif
> +
> +deps += ['mbuf', 'ethdev', 'kvargs', 'bus_fslmc']
> +sources = files('dpaa2_hw_mempool.c')
> diff --git a/drivers/mempool/meson.build b/drivers/mempool/meson.build
> index 5991856..47431cd 100644
> --- a/drivers/mempool/meson.build
> +++ b/drivers/mempool/meson.build
> @@ -1,7 +1,7 @@
>  # SPDX-License-Identifier: BSD-3-Clause
>  # Copyright(c) 2017 Intel Corporation
>  
> -drivers = ['ring', 'stack', 'octeontx']
> +drivers = ['ring', 'stack', 'octeontx', 'dpaa', 'dpaa2']

ordering.

>  std_deps = ['mempool']
>  config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL'
>  driver_name_fmt = 'rte_mempool_@0@'
> diff --git a/drivers/net/dpaa/meson.build b/drivers/net/dpaa/meson.build
> new file mode 100644
> index 0000000..e5a2d17
> --- /dev/null
> +++ b/drivers/net/dpaa/meson.build
> @@ -0,0 +1,15 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> +	build = false
> +endif
> +deps += ['bus_dpaa']
> +deps += ['mempool_dpaa']
> +
> +sources = files('dpaa_ethdev.c',
> +		'dpaa_rxtx.c')
> +
> +allow_experimental_apis = true
> +
> +install_headers('rte_pmd_dpaa.h')
> diff --git a/drivers/net/dpaa2/meson.build b/drivers/net/dpaa2/meson.build
> new file mode 100644
> index 0000000..025c587
> --- /dev/null
> +++ b/drivers/net/dpaa2/meson.build
> @@ -0,0 +1,16 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> +        build = false
> +endif
> +
> +deps += ['bus_fslmc']       # same with vdev bus
> +deps += ['mempool_dpaa2']       # same with vdev bus
> +sources = files('dpaa2_ethdev.c',
> +		'dpaa2_rxtx.c',
> +		'base/dpaa2_hw_dpni.c',
> +		'mc/dpni.c',
> +		'mc/dpkg.c')
> +
> +includes += include_directories('base', 'mc')
> diff --git a/drivers/net/meson.build b/drivers/net/meson.build
> index 704cbe3..6d7a772 100644
> --- a/drivers/net/meson.build
> +++ b/drivers/net/meson.build
> @@ -4,7 +4,7 @@
>  drivers = ['af_packet', 'bonding',
>  	'e1000', 'fm10k', 'i40e', 'ixgbe',
>  	'null', 'octeontx', 'pcap', 'ring',
> -	'sfc', 'thunderx']
> +	'sfc', 'thunderx', 'dpaa', 'dpaa2']

ordering.

>  std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc
>  std_deps += ['bus_pci']         # very many PMDs depend on PCI, so make std
>  std_deps += ['bus_vdev']        # same with vdev bus
> -- 
> 2.7.4
>
Hemant Agrawal March 1, 2018, 6:10 a.m. | #2
On 2/28/2018 8:14 PM, Bruce Richardson wrote:
> On Tue, Feb 27, 2018 at 10:55:52PM +0530, Hemant Agrawal wrote:
>> Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
>> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
>> ---
> 
> Thanks for this. Some comments inline below.
> 
> /Bruce
<snip>..



>> diff --git a/drivers/bus/fslmc/meson.build b/drivers/bus/fslmc/meson.build
>> new file mode 100644
>> index 0000000..87475ee
>> --- /dev/null
>> +++ b/drivers/bus/fslmc/meson.build
>> @@ -0,0 +1,28 @@
>> +# SPDX-License-Identifier: BSD-3-Clause
>> +# Copyright 2018 NXP
>> +
>> +if host_machine.system() != 'linux'
>> +        build = false
>> +endif
>> +
>> +deps += ['eal', 'ethdev', 'eventdev']
> 
> Another minor nit - eal isn't strictly necessary here as both ethdev and
> eventdev already depend on it, and dependencies are recursive.
> Explicitly calling out all dependencies is not wrong, but in previous
> prototyping I found that meson takes a lot longer to run when it has to
> sort through all the dependency chains. That's why in other libs and
> drivers I tried to keep the dependency lists to a minimum.
> As well as this, EAL is a standard dependency, so it's already in the
> deps array at this point.
> 

yes, it worked.

>> +sources = files('qbman/qbman_portal.c',
>> +		'qbman/qbman_debug.c',
>> +		'mc/dpmng.c',
>> +		'mc/dpbp.c',
>> +		'mc/dpio.c',
>> +		'mc/mc_sys.c',
>> +		'mc/dpcon.c',
>> +		'mc/dpci.c',
>> +		'portal/dpaa2_hw_dpio.c',
>> +		'portal/dpaa2_hw_dpbp.c',
>> +		'portal/dpaa2_hw_dpci.c',
>> +		'fslmc_vfio.c',
>> +		'fslmc_bus.c')
>> +
>> +allow_experimental_apis = true
>> +
>> +includes += include_directories('../../../lib/librte_eal/linuxapp/eal')
> 
> Is this not covered by the dependency on eal? Is it accessing things
> directly in the EAL internals?

We are accessing eal_vfio.h. so it is needed.

../drivers/bus/fslmc/fslmc_vfio.h:12:10: fatal error: eal_vfio.h: No 
such file or directory
  #include <eal_vfio.h>

> 
>> +includes += include_directories('mc', 'qbman/include', 'portal')
>> +dpdk_conf.set('CONFIG_RTE_ARCH_ARM_TUNE', 'cortex-a72')
> 
> This setting seems strange here? How is it used, and why set only inside
> this particular driver?
> 

We can remove it

>> +cflags += ['-D_GNU_SOURCE']
>> diff --git a/drivers/bus/meson.build b/drivers/bus/meson.build
>> index c6af500..2187f6b 100644
>> --- a/drivers/bus/meson.build
>> +++ b/drivers/bus/meson.build
>> @@ -1,7 +1,7 @@
>>   # SPDX-License-Identifier: BSD-3-Clause
>>   # Copyright(c) 2017 Intel Corporation
>>   
>> -drivers = ['pci', 'vdev']
>> -std_deps = ['eal']
>> +drivers = ['pci', 'vdev', 'fslmc', 'dpaa']
> 
> Please keep alphabetical order.
> 
>> +std_deps = ['eal', 'kvargs']
> 
> No big issue with this line change, but did you consider just making
> kvargs a dependency of the fslmc and dpaa buses directly, rather than
> making pci and vdev also depend on them?
> 
Yes. it will work
Thomas Monjalon March 1, 2018, 2:15 p.m. | #3
01/03/2018 07:10, Hemant Agrawal:
> On 2/28/2018 8:14 PM, Bruce Richardson wrote:
> > On Tue, Feb 27, 2018 at 10:55:52PM +0530, Hemant Agrawal wrote:
> >> +includes += include_directories('../../../lib/librte_eal/linuxapp/eal')
> > 
> > Is this not covered by the dependency on eal? Is it accessing things
> > directly in the EAL internals?
> 
> We are accessing eal_vfio.h. so it is needed.

Let's try to fix it.
What is required exactly? Can it be in the exported header?
Thomas Monjalon March 9, 2018, 4:49 p.m. | #4
ping

01/03/2018 15:15, Thomas Monjalon:
> 01/03/2018 07:10, Hemant Agrawal:
> > On 2/28/2018 8:14 PM, Bruce Richardson wrote:
> > > On Tue, Feb 27, 2018 at 10:55:52PM +0530, Hemant Agrawal wrote:
> > >> +includes += include_directories('../../../lib/librte_eal/linuxapp/eal')
> > > 
> > > Is this not covered by the dependency on eal? Is it accessing things
> > > directly in the EAL internals?
> > 
> > We are accessing eal_vfio.h. so it is needed.
> 
> Let's try to fix it.
> What is required exactly? Can it be in the exported header?
Hemant Agrawal March 9, 2018, 5:42 p.m. | #5
Hi Thomas,

> 
> ping
> 
> 01/03/2018 15:15, Thomas Monjalon:
> > 01/03/2018 07:10, Hemant Agrawal:
> > > On 2/28/2018 8:14 PM, Bruce Richardson wrote:
> > > > On Tue, Feb 27, 2018 at 10:55:52PM +0530, Hemant Agrawal wrote:
> > > >> +includes +=
> > > >> +include_directories('../../../lib/librte_eal/linuxapp/eal')
> > > >
> > > > Is this not covered by the dependency on eal? Is it accessing
> > > > things directly in the EAL internals?
> > >
> > > We are accessing eal_vfio.h. so it is needed.
> >
> > Let's try to fix it.
> > What is required exactly? Can it be in the exported header?
> 
> 
Currently we are accessing few of the internal vfio functions such as vfio_get_container_fd or vfio_get_group_fd
Yes, they can be moved to rte_vfio.h 

Regards,
Hemant

Patch

diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build
index 7ed74db..83f8bb1 100644
--- a/app/test-pmd/meson.build
+++ b/app/test-pmd/meson.build
@@ -32,6 +32,9 @@  if dpdk_conf.has('RTE_LIBRTE_SOFTNIC_PMD')
 	sources += files('tm.c')
 	deps += 'pmd_softnic'
 endif
+if dpdk_conf.has('RTE_LIBRTE_DPAA_PMD')
+	deps += ['bus_dpaa', 'mempool_dpaa', 'pmd_dpaa']
+endif
 
 dep_objs = []
 foreach d:deps
diff --git a/config/arm/arm64_dpaa2_linuxapp_gcc b/config/arm/arm64_dpaa2_linuxapp_gcc
new file mode 100644
index 0000000..87337fb
--- /dev/null
+++ b/config/arm/arm64_dpaa2_linuxapp_gcc
@@ -0,0 +1,13 @@ 
+[binaries]
+c = 'aarch64-linux-gnu-gcc'
+cpp = 'aarch64-linux-gnu-cpp'
+ar = 'aarch64-linux-gnu-gcc-ar'
+
+[host_machine]
+system = 'linux'
+cpu_family = 'aarch64'
+cpu = 'armv8-a'
+endian = 'little'
+
+[properties]
+implementor_id = 'dpaa2'
diff --git a/config/arm/arm64_dpaa_linuxapp_gcc b/config/arm/arm64_dpaa_linuxapp_gcc
new file mode 100644
index 0000000..f769435
--- /dev/null
+++ b/config/arm/arm64_dpaa_linuxapp_gcc
@@ -0,0 +1,14 @@ 
+[binaries]
+c = 'aarch64-linux-gnu-gcc'
+cpp = 'aarch64-linux-gnu-cpp'
+ar = 'aarch64-linux-gnu-gcc-ar'
+strip = 'aarch64-linux-gnu-strip'
+
+[host_machine]
+system = 'linux'
+cpu_family = 'aarch64'
+cpu = 'armv8-a'
+endian = 'little'
+
+[properties]
+implementor_id = 'dpaa'
diff --git a/config/arm/meson.build b/config/arm/meson.build
index 4e788a4..c1ab6ed 100644
--- a/config/arm/meson.build
+++ b/config/arm/meson.build
@@ -54,6 +54,17 @@  flags_cavium = [
 	['RTE_MAX_LCORE', 96],
 	['RTE_MAX_VFIO_GROUPS', 128],
 	['RTE_RING_USE_C11_MEM_MODEL', false]]
+flags_dpaa = [
+	['RTE_MACHINE', '"dpaa"'],
+	['RTE_CACHE_LINE_SIZE', 64],
+	['RTE_MAX_NUMA_NODES', 1],
+	['RTE_MAX_LCORE', 16]]
+flags_dpaa2 = [
+	['RTE_MACHINE', '"dpaa2"'],
+	['RTE_CACHE_LINE_SIZE', 64],
+	['RTE_MAX_NUMA_NODES', 1],
+	['RTE_MAX_LCORE', 16],
+	['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', 'n']]
 
 ## Arm implementer ID (ARM DDI 0487C.a, Section G7.2.106, Page G7-5321)
 impl_generic = ['Generic armv8', flags_generic, machine_args_generic]
@@ -69,6 +80,8 @@  impl_0x51 = ['Qualcomm', flags_generic, machine_args_generic]
 impl_0x53 = ['Samsung', flags_generic, machine_args_generic]
 impl_0x56 = ['Marvell', flags_generic, machine_args_generic]
 impl_0x69 = ['Intel', flags_generic, machine_args_generic]
+impl_dpaa = ['NXP DPAA', flags_dpaa, machine_args_generic]
+impl_dpaa2 = ['NXP DPAA2', flags_dpaa2, machine_args_generic]
 
 
 if cc.get_define('__clang__') != ''
diff --git a/drivers/bus/dpaa/meson.build b/drivers/bus/dpaa/meson.build
new file mode 100644
index 0000000..c4257a5
--- /dev/null
+++ b/drivers/bus/dpaa/meson.build
@@ -0,0 +1,29 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2018 NXP
+
+if host_machine.system() != 'linux'
+        build = false
+endif
+
+deps += ['pci', 'ethdev', 'eventdev']
+sources = files('dpaa_bus.c',
+		'base/fman/fman.c',
+		'base/fman/fman_hw.c',
+		'base/fman/of.c',
+		'base/fman/netcfg_layer.c',
+		'base/qbman/process.c',
+		'base/qbman/bman.c',
+		'base/qbman/bman_driver.c',
+		'base/qbman/qman.c',
+		'base/qbman/qman_driver.c',
+		'base/qbman/dpaa_alloc.c',
+		'base/qbman/dpaa_sys.c')
+
+allow_experimental_apis = true
+
+if cc.has_argument('-Wno-cast-qual')
+	cflags += '-Wno-cast-qual'
+endif
+
+includes += include_directories('include', 'base/qbman')
+cflags += ['-D_GNU_SOURCE']
diff --git a/drivers/bus/fslmc/meson.build b/drivers/bus/fslmc/meson.build
new file mode 100644
index 0000000..87475ee
--- /dev/null
+++ b/drivers/bus/fslmc/meson.build
@@ -0,0 +1,28 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2018 NXP
+
+if host_machine.system() != 'linux'
+        build = false
+endif
+
+deps += ['eal', 'ethdev', 'eventdev']
+sources = files('qbman/qbman_portal.c',
+		'qbman/qbman_debug.c',
+		'mc/dpmng.c',
+		'mc/dpbp.c',
+		'mc/dpio.c',
+		'mc/mc_sys.c',
+		'mc/dpcon.c',
+		'mc/dpci.c',
+		'portal/dpaa2_hw_dpio.c',
+		'portal/dpaa2_hw_dpbp.c',
+		'portal/dpaa2_hw_dpci.c',
+		'fslmc_vfio.c',
+		'fslmc_bus.c')
+
+allow_experimental_apis = true
+
+includes += include_directories('../../../lib/librte_eal/linuxapp/eal')
+includes += include_directories('mc', 'qbman/include', 'portal')
+dpdk_conf.set('CONFIG_RTE_ARCH_ARM_TUNE', 'cortex-a72')
+cflags += ['-D_GNU_SOURCE']
diff --git a/drivers/bus/meson.build b/drivers/bus/meson.build
index c6af500..2187f6b 100644
--- a/drivers/bus/meson.build
+++ b/drivers/bus/meson.build
@@ -1,7 +1,7 @@ 
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-drivers = ['pci', 'vdev']
-std_deps = ['eal']
+drivers = ['pci', 'vdev', 'fslmc', 'dpaa']
+std_deps = ['eal', 'kvargs']
 config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
 driver_name_fmt = 'rte_bus_@0@'
diff --git a/drivers/crypto/dpaa2_sec/meson.build b/drivers/crypto/dpaa2_sec/meson.build
new file mode 100644
index 0000000..e80f15d
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/meson.build
@@ -0,0 +1,16 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2018 NXP
+
+if host_machine.system() != 'linux'
+        build = false
+endif
+
+deps += ['bus_fslmc', 'security', 'mempool_dpaa2']
+sources = files('dpaa2_sec_dpseci.c',
+		'mc/dpseci.c')
+
+allow_experimental_apis = true
+
+includes += include_directories('mc', 'hw')
+dpdk_conf.set('RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS', 2048)
+ext_deps += dep
diff --git a/drivers/crypto/dpaa_sec/meson.build b/drivers/crypto/dpaa_sec/meson.build
new file mode 100644
index 0000000..10a7dd3
--- /dev/null
+++ b/drivers/crypto/dpaa_sec/meson.build
@@ -0,0 +1,16 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2018 NXP
+
+if host_machine.system() != 'linux'
+        build = false
+endif
+
+deps += ['bus_dpaa', 'security']
+sources = files('dpaa_sec.c')
+
+allow_experimental_apis = true
+
+includes += include_directories('../dpaa2_sec/')
+dpdk_conf.set('RTE_LIBRTE_DPAA_MAX_CRYPTODEV', 4)
+dpdk_conf.set('RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS', 2048)
+ext_deps += dep
diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
index 17041ad..a08bce5 100644
--- a/drivers/crypto/meson.build
+++ b/drivers/crypto/meson.build
@@ -2,6 +2,9 @@ 
 # Copyright(c) 2017 Intel Corporation
 
 drivers = ['qat', 'null', 'openssl']
+
+	drivers += ['dpaa_sec', 'dpaa2_sec']
+
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
 config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
 driver_name_fmt = 'rte_pmd_@0@'
diff --git a/drivers/event/dpaa/meson.build b/drivers/event/dpaa/meson.build
new file mode 100644
index 0000000..0a26d5d
--- /dev/null
+++ b/drivers/event/dpaa/meson.build
@@ -0,0 +1,11 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2018 NXP
+
+if host_machine.system() != 'linux'
+	build = false
+endif
+deps += ['mempool_dpaa', 'bus_dpaa', 'pmd_dpaa']
+sources = files('dpaa_eventdev.c',
+)
+
+allow_experimental_apis = true
diff --git a/drivers/event/dpaa2/meson.build b/drivers/event/dpaa2/meson.build
new file mode 100644
index 0000000..686b622
--- /dev/null
+++ b/drivers/event/dpaa2/meson.build
@@ -0,0 +1,12 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2018 NXP
+
+if host_machine.system() != 'linux'
+	build = false
+endif
+deps += ['mempool_dpaa2', 'bus_fslmc', 'bus_vdev', 'pmd_dpaa2']
+sources = files('dpaa2_hw_dpcon.c',
+		'dpaa2_eventdev.c'
+)
+
+allow_experimental_apis = true
diff --git a/drivers/event/meson.build b/drivers/event/meson.build
index d7bc485..f1c3678 100644
--- a/drivers/event/meson.build
+++ b/drivers/event/meson.build
@@ -1,7 +1,7 @@ 
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-drivers = ['skeleton', 'sw', 'octeontx']
+drivers = ['skeleton', 'sw', 'octeontx', 'dpaa', 'dpaa2']
 std_deps = ['eventdev', 'kvargs']
 config_flag_fmt = 'RTE_LIBRTE_@0@_EVENTDEV_PMD'
 driver_name_fmt = 'rte_pmd_@0@_event'
diff --git a/drivers/mempool/dpaa/meson.build b/drivers/mempool/dpaa/meson.build
new file mode 100644
index 0000000..08423c2
--- /dev/null
+++ b/drivers/mempool/dpaa/meson.build
@@ -0,0 +1,9 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2018 NXP
+
+if host_machine.system() != 'linux'
+        build = false
+endif
+
+deps += ['bus_dpaa']
+sources = files('dpaa_mempool.c')
diff --git a/drivers/mempool/dpaa2/meson.build b/drivers/mempool/dpaa2/meson.build
new file mode 100644
index 0000000..402d087
--- /dev/null
+++ b/drivers/mempool/dpaa2/meson.build
@@ -0,0 +1,9 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2018 NXP
+
+if host_machine.system() != 'linux'
+        build = false
+endif
+
+deps += ['mbuf', 'ethdev', 'kvargs', 'bus_fslmc']
+sources = files('dpaa2_hw_mempool.c')
diff --git a/drivers/mempool/meson.build b/drivers/mempool/meson.build
index 5991856..47431cd 100644
--- a/drivers/mempool/meson.build
+++ b/drivers/mempool/meson.build
@@ -1,7 +1,7 @@ 
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-drivers = ['ring', 'stack', 'octeontx']
+drivers = ['ring', 'stack', 'octeontx', 'dpaa', 'dpaa2']
 std_deps = ['mempool']
 config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL'
 driver_name_fmt = 'rte_mempool_@0@'
diff --git a/drivers/net/dpaa/meson.build b/drivers/net/dpaa/meson.build
new file mode 100644
index 0000000..e5a2d17
--- /dev/null
+++ b/drivers/net/dpaa/meson.build
@@ -0,0 +1,15 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2018 NXP
+
+if host_machine.system() != 'linux'
+	build = false
+endif
+deps += ['bus_dpaa']
+deps += ['mempool_dpaa']
+
+sources = files('dpaa_ethdev.c',
+		'dpaa_rxtx.c')
+
+allow_experimental_apis = true
+
+install_headers('rte_pmd_dpaa.h')
diff --git a/drivers/net/dpaa2/meson.build b/drivers/net/dpaa2/meson.build
new file mode 100644
index 0000000..025c587
--- /dev/null
+++ b/drivers/net/dpaa2/meson.build
@@ -0,0 +1,16 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2018 NXP
+
+if host_machine.system() != 'linux'
+        build = false
+endif
+
+deps += ['bus_fslmc']       # same with vdev bus
+deps += ['mempool_dpaa2']       # same with vdev bus
+sources = files('dpaa2_ethdev.c',
+		'dpaa2_rxtx.c',
+		'base/dpaa2_hw_dpni.c',
+		'mc/dpni.c',
+		'mc/dpkg.c')
+
+includes += include_directories('base', 'mc')
diff --git a/drivers/net/meson.build b/drivers/net/meson.build
index 704cbe3..6d7a772 100644
--- a/drivers/net/meson.build
+++ b/drivers/net/meson.build
@@ -4,7 +4,7 @@ 
 drivers = ['af_packet', 'bonding',
 	'e1000', 'fm10k', 'i40e', 'ixgbe',
 	'null', 'octeontx', 'pcap', 'ring',
-	'sfc', 'thunderx']
+	'sfc', 'thunderx', 'dpaa', 'dpaa2']
 std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc
 std_deps += ['bus_pci']         # very many PMDs depend on PCI, so make std
 std_deps += ['bus_vdev']        # same with vdev bus