[v2,0/8] support VIRTIO_F_IN_ORDER feature
mbox series

Message ID 20180625151710.29437-1-yong.liu@intel.com
Headers show
Series
  • support VIRTIO_F_IN_ORDER feature
Related show

Message

Liu, Yong June 25, 2018, 3:17 p.m. UTC
In latest virtio-spec, new feature bit VIRTIO_F_IN_ORDER was introduced.
When this feature has been negotiated, virtio driver will use
descriptors in ring order: starting from offset 0 in the table, and
wrapping around at the end of the table. Vhost devices will always use
descriptors in the same order in which they have been made available.
This can reduce virtio accesses to used ring.

Based on updated virtio-spec, this series realized IN_ORDER prototype
in virtio driver. Due to new [RT]x path added into selection, also add
two new parameters mrg_rx and in_order into virtio-user vdev parameters
list. This will allow user to configure feature bits thus can impact
[RT]x path selection.

Performance of virtio user with IN_ORDER feature:

    Platform: Purely
    CPU: Intel(R) Xeon(R) Platinum 8160 CPU @ 2.10GHz
    DPDK baseline: 18.05
    Setup: testpmd with vhost vdev + testpmd with virtio vdev

    +--------------+----------+----------+---------+
    |Vhost->Virtio |1 Queue   |2 Queues  |4 Queues |
    +--------------+----------+----------+---------+
    |Inorder       |12.0Mpps  |24.2Mpps  |26.0Mpps |
    |Normal        |12.1Mpps  |18.5Mpps  |18.9Mpps |
    +--------------+----------+----------+---------+
    
    +--------------+----------+----------------+---------+
    |Virtio->Vhost |1 Queue   |2 Queues        |4 Queues |
    +--------------+----------+----------------+---------+
    |Inorder       |13.8Mpps  |10.7 ~ 15.2Mpps |11.5Mpps |
    |Normal        |13.3Mpps  |9.8 ~ 14Mpps    |10.5Mpps |
    +--------------+----------+----------------+---------+
    
    +---------+----------+----------------+----------------+
    |Loopback |1 Queue   |2 Queues        |4 Queues        |
    +---------+----------+----------------+----------------+
    |Inorder  |7.4Mpps   |9.1 ~ 11.6Mpps  |10.5 ~ 11.3Mpps |
    +---------+----------+----------------+----------------+
    |Normal   |7.5Mpps   |7.7 ~ 9.0Mpps   |7.6 ~ 7.8Mpps   |
    +---------+----------+----------------+----------------+

v2:
- merge to latest dpdk-net-virtio 
- not use in_direct for normal xmit packets
- update available ring for each descriptor
- clean up IN_ORDER xmit function
- unmask feature bits when disabled in_order or mgr_rxbuf
- extract common part between IN_ORDER and normal functions
- update performance result

Marvin Liu (8):
  vhost: announce VIRTIO_F_IN_ORDER support
  net/virtio: add VIRTIO_F_IN_ORDER definition
  net/virtio-user: add mrg_rxbuf and in_order vdev parameters
  net/virtio: free IN_ORDER descriptors before device start
  net/virtio: extract common part for IN_ORDER functions
  net/virtio: support IN_ORDER Rx and Tx
  net/virtio: add IN_ORDER Rx/Tx into selection
  net/virtio: annouce VIRTIO_F_IN_ORDER support

 drivers/net/virtio/virtio_ethdev.c            |  31 +-
 drivers/net/virtio/virtio_ethdev.h            |   7 +
 drivers/net/virtio/virtio_pci.h               |   8 +
 drivers/net/virtio/virtio_rxtx.c              | 635 ++++++++++++++++--
 .../net/virtio/virtio_user/virtio_user_dev.c  |  14 +-
 .../net/virtio/virtio_user/virtio_user_dev.h  |   3 +-
 drivers/net/virtio/virtio_user_ethdev.c       |  33 +-
 drivers/net/virtio/virtqueue.c                |   8 +
 drivers/net/virtio/virtqueue.h                |   2 +
 lib/librte_vhost/socket.c                     |   6 +
 lib/librte_vhost/vhost.h                      |  10 +-
 11 files changed, 688 insertions(+), 69 deletions(-)

Comments

Maxime Coquelin June 26, 2018, 7:56 a.m. UTC | #1
Hi,

On 06/25/2018 05:17 PM, Marvin Liu wrote:
> In latest virtio-spec, new feature bit VIRTIO_F_IN_ORDER was introduced.
> When this feature has been negotiated, virtio driver will use
> descriptors in ring order: starting from offset 0 in the table, and
> wrapping around at the end of the table. Vhost devices will always use
> descriptors in the same order in which they have been made available.
> This can reduce virtio accesses to used ring.
> 
> Based on updated virtio-spec, this series realized IN_ORDER prototype
> in virtio driver. Due to new [RT]x path added into selection, also add
> two new parameters mrg_rx and in_order into virtio-user vdev parameters
> list. This will allow user to configure feature bits thus can impact
> [RT]x path selection.
> 
> Performance of virtio user with IN_ORDER feature:
> 
>      Platform: Purely
>      CPU: Intel(R) Xeon(R) Platinum 8160 CPU @ 2.10GHz
>      DPDK baseline: 18.05
>      Setup: testpmd with vhost vdev + testpmd with virtio vdev
> 
>      +--------------+----------+----------+---------+
>      |Vhost->Virtio |1 Queue   |2 Queues  |4 Queues |
>      +--------------+----------+----------+---------+
>      |Inorder       |12.0Mpps  |24.2Mpps  |26.0Mpps |
>      |Normal        |12.1Mpps  |18.5Mpps  |18.9Mpps |
>      +--------------+----------+----------+---------+
>      
>      +--------------+----------+----------------+---------+
>      |Virtio->Vhost |1 Queue   |2 Queues        |4 Queues |
>      +--------------+----------+----------------+---------+
>      |Inorder       |13.8Mpps  |10.7 ~ 15.2Mpps |11.5Mpps |
>      |Normal        |13.3Mpps  |9.8 ~ 14Mpps    |10.5Mpps |
>      +--------------+----------+----------------+---------+
>      
>      +---------+----------+----------------+----------------+
>      |Loopback |1 Queue   |2 Queues        |4 Queues        |
>      +---------+----------+----------------+----------------+
>      |Inorder  |7.4Mpps   |9.1 ~ 11.6Mpps  |10.5 ~ 11.3Mpps |
>      +---------+----------+----------------+----------------+
>      |Normal   |7.5Mpps   |7.7 ~ 9.0Mpps   |7.6 ~ 7.8Mpps   |
>      +---------+----------+----------------+----------------+
> 
> v2:
> - merge to latest dpdk-net-virtio
> - not use in_direct for normal xmit packets
> - update available ring for each descriptor
> - clean up IN_ORDER xmit function
> - unmask feature bits when disabled in_order or mgr_rxbuf
> - extract common part between IN_ORDER and normal functions
> - update performance result
> 
> Marvin Liu (8):
>    vhost: announce VIRTIO_F_IN_ORDER support
>    net/virtio: add VIRTIO_F_IN_ORDER definition
>    net/virtio-user: add mrg_rxbuf and in_order vdev parameters
>    net/virtio: free IN_ORDER descriptors before device start
>    net/virtio: extract common part for IN_ORDER functions
>    net/virtio: support IN_ORDER Rx and Tx
>    net/virtio: add IN_ORDER Rx/Tx into selection
>    net/virtio: annouce VIRTIO_F_IN_ORDER support

I haven't checked but guess the titles doesn't pass the check-git-log.sh
script as they contains underscores.

>   drivers/net/virtio/virtio_ethdev.c            |  31 +-
>   drivers/net/virtio/virtio_ethdev.h            |   7 +
>   drivers/net/virtio/virtio_pci.h               |   8 +
>   drivers/net/virtio/virtio_rxtx.c              | 635 ++++++++++++++++--
>   .../net/virtio/virtio_user/virtio_user_dev.c  |  14 +-
>   .../net/virtio/virtio_user/virtio_user_dev.h  |   3 +-
>   drivers/net/virtio/virtio_user_ethdev.c       |  33 +-
>   drivers/net/virtio/virtqueue.c                |   8 +
>   drivers/net/virtio/virtqueue.h                |   2 +
>   lib/librte_vhost/socket.c                     |   6 +
>   lib/librte_vhost/vhost.h                      |  10 +-
>   11 files changed, 688 insertions(+), 69 deletions(-)
>
Liu, Yong June 26, 2018, 8:01 a.m. UTC | #2
> -----Original Message-----
> From: Maxime Coquelin [mailto:maxime.coquelin@redhat.com]
> Sent: Tuesday, June 26, 2018 3:56 PM
> To: Liu, Yong <yong.liu@intel.com>; Bie, Tiwei <tiwei.bie@intel.com>
> Cc: Wang, Zhihong <zhihong.wang@intel.com>; dev@dpdk.org
> Subject: Re: [PATCH v2 0/8] support VIRTIO_F_IN_ORDER feature
> 
> Hi,
> 
> On 06/25/2018 05:17 PM, Marvin Liu wrote:
> > In latest virtio-spec, new feature bit VIRTIO_F_IN_ORDER was introduced.
> > When this feature has been negotiated, virtio driver will use
> > descriptors in ring order: starting from offset 0 in the table, and
> > wrapping around at the end of the table. Vhost devices will always use
> > descriptors in the same order in which they have been made available.
> > This can reduce virtio accesses to used ring.
> >
> > Based on updated virtio-spec, this series realized IN_ORDER prototype
> > in virtio driver. Due to new [RT]x path added into selection, also add
> > two new parameters mrg_rx and in_order into virtio-user vdev parameters
> > list. This will allow user to configure feature bits thus can impact
> > [RT]x path selection.
> >
> > Performance of virtio user with IN_ORDER feature:
> >
> >      Platform: Purely
> >      CPU: Intel(R) Xeon(R) Platinum 8160 CPU @ 2.10GHz
> >      DPDK baseline: 18.05
> >      Setup: testpmd with vhost vdev + testpmd with virtio vdev
> >
> >      +--------------+----------+----------+---------+
> >      |Vhost->Virtio |1 Queue   |2 Queues  |4 Queues |
> >      +--------------+----------+----------+---------+
> >      |Inorder       |12.0Mpps  |24.2Mpps  |26.0Mpps |
> >      |Normal        |12.1Mpps  |18.5Mpps  |18.9Mpps |
> >      +--------------+----------+----------+---------+
> >
> >      +--------------+----------+----------------+---------+
> >      |Virtio->Vhost |1 Queue   |2 Queues        |4 Queues |
> >      +--------------+----------+----------------+---------+
> >      |Inorder       |13.8Mpps  |10.7 ~ 15.2Mpps |11.5Mpps |
> >      |Normal        |13.3Mpps  |9.8 ~ 14Mpps    |10.5Mpps |
> >      +--------------+----------+----------------+---------+
> >
> >      +---------+----------+----------------+----------------+
> >      |Loopback |1 Queue   |2 Queues        |4 Queues        |
> >      +---------+----------+----------------+----------------+
> >      |Inorder  |7.4Mpps   |9.1 ~ 11.6Mpps  |10.5 ~ 11.3Mpps |
> >      +---------+----------+----------------+----------------+
> >      |Normal   |7.5Mpps   |7.7 ~ 9.0Mpps   |7.6 ~ 7.8Mpps   |
> >      +---------+----------+----------------+----------------+
> >
> > v2:
> > - merge to latest dpdk-net-virtio
> > - not use in_direct for normal xmit packets
> > - update available ring for each descriptor
> > - clean up IN_ORDER xmit function
> > - unmask feature bits when disabled in_order or mgr_rxbuf
> > - extract common part between IN_ORDER and normal functions
> > - update performance result
> >
> > Marvin Liu (8):
> >    vhost: announce VIRTIO_F_IN_ORDER support
> >    net/virtio: add VIRTIO_F_IN_ORDER definition
> >    net/virtio-user: add mrg_rxbuf and in_order vdev parameters
> >    net/virtio: free IN_ORDER descriptors before device start
> >    net/virtio: extract common part for IN_ORDER functions
> >    net/virtio: support IN_ORDER Rx and Tx
> >    net/virtio: add IN_ORDER Rx/Tx into selection
> >    net/virtio: annouce VIRTIO_F_IN_ORDER support
> 
> I haven't checked but guess the titles doesn't pass the check-git-log.sh
> script as they contains underscores.

Thanks for your reminder, Maxime. I will replace "IN_ORDER" to "in order" which can pass check.
> 
> >   drivers/net/virtio/virtio_ethdev.c            |  31 +-
> >   drivers/net/virtio/virtio_ethdev.h            |   7 +
> >   drivers/net/virtio/virtio_pci.h               |   8 +
> >   drivers/net/virtio/virtio_rxtx.c              | 635 ++++++++++++++++--
> >   .../net/virtio/virtio_user/virtio_user_dev.c  |  14 +-
> >   .../net/virtio/virtio_user/virtio_user_dev.h  |   3 +-
> >   drivers/net/virtio/virtio_user_ethdev.c       |  33 +-
> >   drivers/net/virtio/virtqueue.c                |   8 +
> >   drivers/net/virtio/virtqueue.h                |   2 +
> >   lib/librte_vhost/socket.c                     |   6 +
> >   lib/librte_vhost/vhost.h                      |  10 +-
> >   11 files changed, 688 insertions(+), 69 deletions(-)
> >