@@ -240,11 +240,19 @@ ntb_enqueue_bufs(struct rte_rawdev *dev,
unsigned int count,
rte_rawdev_obj_t context)
{
- RTE_SET_USED(dev);
- RTE_SET_USED(buffers);
- RTE_SET_USED(count);
- RTE_SET_USED(context);
+ /* Not FIFO right now. Just for testing memory write. */
+ struct ntb_hw *hw = dev->dev_private;
+ unsigned int i;
+ void *bar_addr;
+ size_t size;
+
+ if (hw->ntb_ops->get_peer_mw_addr == NULL)
+ return -ENOTSUP;
+ bar_addr = (*hw->ntb_ops->get_peer_mw_addr)(dev, 0);
+ size = (size_t)context;
+ for (i = 0; i < count; i++)
+ rte_memcpy(bar_addr, buffers[i]->buf_addr, size);
return 0;
}
@@ -254,11 +262,15 @@ ntb_dequeue_bufs(struct rte_rawdev *dev,
unsigned int count,
rte_rawdev_obj_t context)
{
- RTE_SET_USED(dev);
- RTE_SET_USED(buffers);
- RTE_SET_USED(count);
- RTE_SET_USED(context);
+ /* Not FIFO. Just for testing memory read. */
+ struct ntb_hw *hw = dev->dev_private;
+ unsigned int i;
+ size_t size;
+
+ size = (size_t)context;
+ for (i = 0; i < count; i++)
+ rte_memcpy(buffers[i]->buf_addr, hw->mz[i]->addr, size);
return 0;
}
@@ -53,6 +53,7 @@ DIRS-y += link_status_interrupt
DIRS-$(CONFIG_RTE_LIBRTE_LPM) += load_balancer
DIRS-y += multi_process
DIRS-y += netmap_compat/bridge
+DIRS-y += ntb
DIRS-$(CONFIG_RTE_LIBRTE_REORDER) += packet_ordering
ifeq ($(CONFIG_RTE_ARCH_X86_64),y)
DIRS-y += performance-thread
@@ -30,7 +30,7 @@ all_examples = [
'multi_process/hotplug_mp',
'multi_process/simple_mp',
'multi_process/symmetric_mp',
- 'netmap_compat', 'packet_ordering',
+ 'netmap_compat', 'ntb', 'packet_ordering',
'performance-thread', 'ptpclient',
'qos_meter', 'qos_sched',
'quota_watermark', 'rxtx_callbacks',
new file mode 100644
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2019 Intel Corporation
+
+# binary name
+APP = ntb_fwd
+
+# all source are stored in SRCS-y
+SRCS-y := ntb_fwd.c
+
+# Build using pkg-config variables if possible
+$(shell pkg-config --exists libdpdk)
+ifeq ($(.SHELLSTATUS),0)
+
+all: shared
+.PHONY: shared static
+shared: build/$(APP)-shared
+ ln -sf $(APP)-shared build/$(APP)
+static: build/$(APP)-static
+ ln -sf $(APP)-static build/$(APP)
+
+CFLAGS += -D_FILE_OFFSET_BITS=64
+LDFLAGS += -pthread
+
+PC_FILE := $(shell pkg-config --path libdpdk)
+CFLAGS += -O3 $(shell pkg-config --cflags libdpdk)
+LDFLAGS_SHARED = $(shell pkg-config --libs libdpdk)
+LDFLAGS_STATIC = -Wl,-Bstatic $(shell pkg-config --static --libs libdpdk)
+
+build/$(APP)-shared: $(SRCS-y) Makefile $(PC_FILE) | build
+ $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_SHARED)
+
+build/$(APP)-static: $(SRCS-y) Makefile $(PC_FILE) | build
+ $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_STATIC)
+
+build:
+ @mkdir -p $@
+
+.PHONY: clean
+clean:
+ rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
+ rmdir --ignore-fail-on-non-empty build
+
+else # Build using legacy build system
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overridden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+$(info This application can only operate in a linuxapp environment, \
+please change the definition of the RTE_TARGET environment variable)
+all:
+else
+
+CFLAGS += -D_FILE_OFFSET_BITS=64
+CFLAGS += -O2
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
+
+include $(RTE_SDK)/mk/rte.extapp.mk
+
+endif
+endif
new file mode 100644
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2019 Intel Corporation
+
+# meson file, for building this example as part of a main DPDK build.
+#
+# To build this example as a standalone application with an already-installed
+# DPDK instance, use 'make'
+
+if host_machine.system() != 'linux'
+ build = false
+endif
+deps += 'rawdev'
+cflags += ['-D_FILE_OFFSET_BITS=64']
+sources = files(
+ 'ntb_fwd.c'
+)
new file mode 100644
@@ -0,0 +1,377 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2019 Intel Corporation
+ */
+#include <stdint.h>
+#include <stdio.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <signal.h>
+#include <string.h>
+#include <getopt.h>
+
+#include <cmdline_parse_string.h>
+#include <cmdline_socket.h>
+#include <cmdline.h>
+#include <rte_common.h>
+#include <rte_rawdev.h>
+#include <rte_lcore.h>
+
+#define NTB_DRV_NAME_LEN 7
+static uint64_t max_file_size = 0x400000;
+static uint8_t interactive = 1;
+static uint16_t dev_id;
+
+/* *** Help command with introduction. *** */
+struct cmd_help_result {
+ cmdline_fixed_string_t help;
+};
+
+static void cmd_help_parsed(__attribute__((unused)) void *parsed_result,
+ struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ cmdline_printf(
+ cl,
+ "\n"
+ "The following commands are currently available:\n\n"
+ "Control:\n"
+ " quit :"
+ " Quit the application.\n"
+ "\nFile transmit:\n"
+ " send [path] :"
+ " Send [path] file. (No more than %"PRIu64")\n"
+ " recv [path] :"
+ " Receive file to [path]. Make sure sending is done"
+ " on the other side.\n",
+ max_file_size
+ );
+
+}
+
+cmdline_parse_token_string_t cmd_help_help =
+ TOKEN_STRING_INITIALIZER(struct cmd_help_result, help, "help");
+
+cmdline_parse_inst_t cmd_help = {
+ .f = cmd_help_parsed,
+ .data = NULL,
+ .help_str = "show help",
+ .tokens = {
+ (void *)&cmd_help_help,
+ NULL,
+ },
+};
+
+/* *** QUIT *** */
+struct cmd_quit_result {
+ cmdline_fixed_string_t quit;
+};
+
+static void cmd_quit_parsed(__attribute__((unused)) void *parsed_result,
+ struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ /* Stop traffic and Close port. */
+ rte_rawdev_stop(dev_id);
+ rte_rawdev_close(dev_id);
+
+ cmdline_quit(cl);
+}
+
+cmdline_parse_token_string_t cmd_quit_quit =
+ TOKEN_STRING_INITIALIZER(struct cmd_quit_result, quit, "quit");
+
+cmdline_parse_inst_t cmd_quit = {
+ .f = cmd_quit_parsed,
+ .data = NULL,
+ .help_str = "exit application",
+ .tokens = {
+ (void *)&cmd_quit_quit,
+ NULL,
+ },
+};
+
+/* *** SEND FILE PARAMETERS *** */
+struct cmd_sendfile_result {
+ cmdline_fixed_string_t send_string;
+ char filepath[];
+};
+
+static void
+cmd_sendfile_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_sendfile_result *res = parsed_result;
+ struct rte_rawdev_buf *pkts_send[1];
+ uint64_t rsize, size, link;
+ uint8_t *buff;
+ uint32_t val;
+ FILE *file;
+
+ if (!rte_rawdevs[dev_id].started) {
+ printf("Device needs to be up first. Try later.\n");
+ return;
+ }
+
+ rte_rawdev_get_attr(dev_id, "link_status", &link);
+ if (!link) {
+ printf("Link is not up, cannot send file.\n");
+ return;
+ }
+
+ file = fopen(res->filepath, "r");
+ if (file == NULL) {
+ printf("Fail to open the file.\n");
+ return;
+ }
+
+ fseek(file, 0, SEEK_END);
+ size = ftell(file);
+ fseek(file, 0, SEEK_SET);
+
+ /**
+ * No FIFO now. Only test memory. Limit sending file
+ * size <= max_file_size.
+ */
+ if (size > max_file_size) {
+ printf("Warning: The file is too large. Only send first"
+ " %"PRIu64" bits.\n", max_file_size);
+ size = max_file_size;
+ }
+
+ buff = (uint8_t *)malloc(size);
+ rsize = fread(buff, size, 1, file);
+ if (rsize != 1) {
+ printf("Fail to read file.\n");
+ fclose(file);
+ free(buff);
+ return;
+ }
+
+ /* Tell remote about the file size. */
+ val = size >> 32;
+ rte_rawdev_set_attr(dev_id, "spad_user_0", val);
+ val = size;
+ rte_rawdev_set_attr(dev_id, "spad_user_1", val);
+
+ pkts_send[0] = (struct rte_rawdev_buf *)malloc
+ (sizeof(struct rte_rawdev_buf));
+ pkts_send[0]->buf_addr = buff;
+
+ if (rte_rawdev_enqueue_buffers(dev_id, pkts_send, 1,
+ (void *)(size_t)size)) {
+ printf("Fail to enqueue.\n");
+ goto clean;
+ }
+ printf("Done sending file.\n");
+
+clean:
+ fclose(file);
+ free(buff);
+ free(pkts_send[0]);
+}
+
+cmdline_parse_token_string_t cmd_send_file_send =
+ TOKEN_STRING_INITIALIZER(struct cmd_sendfile_result, send_string,
+ "send");
+cmdline_parse_token_string_t cmd_send_file_filepath =
+ TOKEN_STRING_INITIALIZER(struct cmd_sendfile_result, filepath, NULL);
+
+
+cmdline_parse_inst_t cmd_send_file = {
+ .f = cmd_sendfile_parsed,
+ .data = NULL,
+ .help_str = "send <file_path>",
+ .tokens = {
+ (void *)&cmd_send_file_send,
+ (void *)&cmd_send_file_filepath,
+ NULL,
+ },
+};
+
+/* *** RECEIVE FILE PARAMETERS *** */
+struct cmd_recvfile_result {
+ cmdline_fixed_string_t recv_string;
+ char filepath[];
+};
+
+static void
+cmd_recvfile_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_sendfile_result *res = parsed_result;
+ struct rte_rawdev_buf *pkts_recv[1];
+ uint8_t *buff;
+ uint64_t val;
+ size_t size;
+ FILE *file;
+
+ if (!rte_rawdevs[dev_id].started) {
+ printf("Device needs to be up first. Try later.\n");
+ return;
+ }
+
+ rte_rawdev_get_attr(dev_id, "link_status", &val);
+ if (!val) {
+ printf("Link is not up, cannot receive file.\n");
+ return;
+ }
+
+ file = fopen(res->filepath, "w");
+ if (file == NULL) {
+ printf("Fail to open the file.\n");
+ return;
+ }
+
+ rte_rawdev_get_attr(dev_id, "spad_user_0", &val);
+ size = val << 32;
+ rte_rawdev_get_attr(dev_id, "spad_user_1", &val);
+ size |= val;
+
+ buff = (uint8_t *)malloc(size);
+ pkts_recv[0] = (struct rte_rawdev_buf *)malloc
+ (sizeof(struct rte_rawdev_buf));
+ pkts_recv[0]->buf_addr = buff;
+
+ if (rte_rawdev_dequeue_buffers(dev_id, pkts_recv, 1, (void *)size)) {
+ printf("Fail to dequeue.\n");
+ goto clean;
+ }
+
+ fwrite(buff, size, 1, file);
+ printf("Done receiving to file.\n");
+
+clean:
+ fclose(file);
+ free(buff);
+ free(pkts_recv[0]);
+}
+
+cmdline_parse_token_string_t cmd_recv_file_recv =
+ TOKEN_STRING_INITIALIZER(struct cmd_recvfile_result, recv_string,
+ "recv");
+cmdline_parse_token_string_t cmd_recv_file_filepath =
+ TOKEN_STRING_INITIALIZER(struct cmd_recvfile_result, filepath, NULL);
+
+
+cmdline_parse_inst_t cmd_recv_file = {
+ .f = cmd_recvfile_parsed,
+ .data = NULL,
+ .help_str = "recv <file_path>",
+ .tokens = {
+ (void *)&cmd_recv_file_recv,
+ (void *)&cmd_recv_file_filepath,
+ NULL,
+ },
+};
+
+/* list of instructions */
+cmdline_parse_ctx_t main_ctx[] = {
+ (cmdline_parse_inst_t *)&cmd_help,
+ (cmdline_parse_inst_t *)&cmd_send_file,
+ (cmdline_parse_inst_t *)&cmd_recv_file,
+ (cmdline_parse_inst_t *)&cmd_quit,
+ NULL,
+};
+
+/* prompt function, called from main on MASTER lcore */
+static void
+prompt(void)
+{
+ struct cmdline *cl;
+
+ cl = cmdline_stdin_new(main_ctx, "ntb> ");
+ if (cl == NULL)
+ return;
+
+ cmdline_interact(cl);
+ cmdline_stdin_exit(cl);
+}
+
+static void
+signal_handler(int signum)
+{
+ if (signum == SIGINT || signum == SIGTERM) {
+ printf("\nSignal %d received, preparing to exit...\n", signum);
+ signal(signum, SIG_DFL);
+ kill(getpid(), signum);
+ }
+}
+
+static void
+ntb_usage(const char *prgname)
+{
+ printf("%s [EAL options] -- [options]\n"
+ "-i : run in interactive mode (default value is 1)\n",
+ prgname);
+}
+
+static int
+parse_args(int argc, char **argv)
+{
+ char *prgname = argv[0], **argvopt = argv;
+ int opt, ret;
+
+ /* Only support interactive mode to send/recv file first. */
+ while ((opt = getopt(argc, argvopt, "i")) != EOF) {
+ switch (opt) {
+ case 'i':
+ printf("Interactive-mode selected\n");
+ interactive = 1;
+ break;
+
+ default:
+ ntb_usage(prgname);
+ return -1;
+ }
+ }
+
+ if (optind >= 0)
+ argv[optind-1] = prgname;
+
+ ret = optind-1;
+ optind = 1; /* reset getopt lib */
+ return ret;
+}
+
+int
+main(int argc, char **argv)
+{
+ int ret, i;
+
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Error with EAL initialization.\n");
+
+ /* Find 1st ntb rawdev. */
+ for (i = 0; i < RTE_RAWDEV_MAX_DEVS; i++)
+ if (rte_rawdevs[i].driver_name &&
+ (strncmp(rte_rawdevs[i].driver_name, "raw_ntb",
+ NTB_DRV_NAME_LEN) == 0) && (rte_rawdevs[i].attached == 1))
+ break;
+
+ if (i == RTE_RAWDEV_MAX_DEVS)
+ rte_exit(EXIT_FAILURE, "Cannot find any ntb device.\n");
+
+ dev_id = i;
+
+ argc -= ret;
+ argv += ret;
+
+ ret = parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid arguments\n");
+
+ rte_rawdev_start(dev_id);
+
+ if (interactive) {
+ sleep(1);
+ prompt();
+ }
+
+ return 0;
+}