app/testpmd: fix help info for interactive commands

  From: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>

Added some missing help info for interactive mode commands

Fixes: 6673fe0ce2 ("app/testpmd: add TM commands to mark packets")
Fixes: c73a907187 ("app/testpmd: add commands to test new offload API")
Fixes: e977e4199a ("app/testpmd: add commands to load/unload BPF filters")
Fixes: c18feafa19 ("app/testpmd: support metadata as flow rule item")
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
---
 app/test-pmd/cmdline.c | 82 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)
  

Hi, Agalya,

Minors:
partciular=>particular

per port.testpmd=>
per port. testpmd
or maybe:
per port. Testpmd

+ "bpf-load rx|tx (port) (queue) (J|M|B) (file_name)\n"
+ "    Load an eBPF program as a callback"
+ " for partciular RX/TX queue\n\n"
+
+ "bpf-unload rx|tx (port) (queue)\n"
+ "    Unload previously loaded eBPF program"
+ " for partciular RX/TX queue\n\n"
+
+ "port config (port_id) tx_metadata (value)\n"
+ "    Set Tx metadata value per port.testpmd will add this value"
+ " to any Tx packet sent from this port\n\n"

Reviewed-by: Rami Rosen <ramirose@gmail.com>
  

Glad to see the help info is added.

Could you categorize this related TM commands to a new group? As you know, the commands in "help config" almost over flow.

Thanks
Jingjing
> -----Original Message-----
> From: Babu Radhakrishnan, AgalyaX
> Sent: Tuesday, March 5, 2019 7:28 PM
> To: dev@dpdk.org
> Cc: reshma.pattan@intel.com??; Lu, Wenzhuo <wenzhuo.lu@intel.com>; Wu, Jingjing
> <jingjing.wu@intel.com>; Babu Radhakrishnan, AgalyaX
> <agalyax.babu.radhakrishnan@intel.com>
> Subject: [PATCH] app/testpmd: fix help info for interactive commands
> 
> From: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
> 
> Added some missing help info for interactive mode commands
> 
> Fixes: 6673fe0ce2 ("app/testpmd: add TM commands to mark packets")
> Fixes: c73a907187 ("app/testpmd: add commands to test new offload API")
> Fixes: e977e4199a ("app/testpmd: add commands to load/unload BPF filters")
> Fixes: c18feafa19 ("app/testpmd: support metadata as flow rule item")
> Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
> ---
>  app/test-pmd/cmdline.c | 82 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 82 insertions(+)
> 
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index db53cc0cc..149711ddc 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -225,6 +225,26 @@ static void cmd_help_long_parsed(void *parsed_result,
>                          "show port tm node stats (port_id) (node_id) (clear)\n"
>                          "       Display the port TM node stats.\n\n"
> 
> +			"show port (port_id) rx_offload capabilities\n"
> +			"    List all per queue and per port Rx offloading"
> +			" capabilities of a port\n\n"
> +
> +			"show port (port_id) rx_offload configuration\n"
> +			"    List port level and all queue level"
> +			" Rx offloading configuration\n\n"
> +
> +			"show port (port_id) tx_offload capabilities\n"
> +			"    List all per queue and per port"
> +			" Tx offloading capabilities of a port\n\n"
> +
> +			"show port (port_id) tx_offload configuration\n"
> +			"    List port level and all queue level"
> +			" Tx offloading configuration\n\n"
> +
> +			"show port (port_id) tx_metadata\n"
> +			"    Show Tx metadata value set"
> +			" for a specific port\n\n"
> +
>  		);
>  	}
> 
> @@ -783,6 +803,22 @@ static void cmd_help_long_parsed(void *parsed_result,
>  			"port tm hierarchy commit (port_id) (clean_on_fail)\n"
>  			"	Commit tm hierarchy.\n\n"
> 
> +			"set port tm mark ip_ecn (port) (green) (yellow)"
> +			" (red)\n"
> +			"    Enables/Disables the traffic management marking"
> +			" for IP ECN (Explicit Congestion Notification)"
> +			" packets on a given port\n\n"
> +
> +			"set port tm mark ip_dscp (port) (green) (yellow)"
> +			" (red)\n"
> +			"    Enables/Disables the traffic management marking"
> +			" on the port for IP dscp packets\n\n"
> +
> +			"set port tm mark vlan_dei (port) (green) (yellow)"
> +			" (red)\n"
> +			"    Enables/Disables the traffic management marking"
> +			" on the port for VLAN packets with DEI enabled\n\n"
> +
>  			"vxlan ip-version (ipv4|ipv6) vni (vni) udp-src"
>  			" (udp-src) udp-dst (udp-dst) ip-src (ip-src) ip-dst"
>  			" (ip-dst) eth-src (eth-src) eth-dst (eth-dst)\n"
> @@ -924,6 +960,52 @@ static void cmd_help_long_parsed(void *parsed_result,
> 
>  			"port config (port_id) udp_tunnel_port add|rm vxlan|geneve
> (udp_port)\n\n"
>  			"    Add/remove UDP tunnel port for tunneling offload\n\n"
> +
> +			"port config <port_id> rx_offload vlan_strip|"
> +			"ipv4_cksum|udp_cksum|tcp_cksum|tcp_lro|qinq_strip|"
> +			"outer_ipv4_cksum|macsec_strip|header_split|"
> +			"vlan_filter|vlan_extend|jumbo_frame|crc_strip|"
> +			"scatter|timestamp|security|keep_crc on|off\n"
> +			"     Enable or disable a per port Rx offloading"
> +			" on all Rx queues of a port\n\n"
> +
> +			"port (port_id) rxq (queue_id) rx_offload vlan_strip|"
> +			"ipv4_cksum|udp_cksum|tcp_cksum|tcp_lro|qinq_strip|"
> +			"outer_ipv4_cksum|macsec_strip|header_split|"
> +			"vlan_filter|vlan_extend|jumbo_frame|crc_strip|"
> +			"scatter|timestamp|security|keep_crc on|off\n"
> +			"    Enable or disable a per queue Rx offloading"
> +			" only on a specific Rx queue\n\n"
> +
> +			"port config (port_id) tx_offload vlan_insert|"
> +			"ipv4_cksum|udp_cksum|tcp_cksum|sctp_cksum|tcp_tso|"
> +			"udp_tso|outer_ipv4_cksum|qinq_insert|vxlan_tnl_tso|"
> +			"gre_tnl_tso|ipip_tnl_tso|geneve_tnl_tso|"
> +			"macsec_insert|mt_lockfree|multi_segs|mbuf_fast_free|"
> +			"security|match_metadata on|off\n"
> +			"    Enable or disable a per port Tx offloading"
> +			" on all Tx queues of a port\n\n"
> +
> +			"port (port_id) txq (queue_id) tx_offload vlan_insert|"
> +			"ipv4_cksum|udp_cksum|tcp_cksum|sctp_cksum|tcp_tso|"
> +			"udp_tso|outer_ipv4_cksum|qinq_insert|vxlan_tnl_tso|"
> +			"gre_tnl_tso|ipip_tnl_tso|geneve_tnl_tso|macsec_insert"
> +			"|mt_lockfree|multi_segs|mbuf_fast_free|security"
> +			" on|off\n"
> +			"    Enable or disable a per queue Tx offloading"
> +			" only on a specific Tx queue\n\n"
> +
> +			"bpf-load rx|tx (port) (queue) (J|M|B) (file_name)\n"
> +			"    Load an eBPF program as a callback"
> +			" for partciular RX/TX queue\n\n"
> +
> +			"bpf-unload rx|tx (port) (queue)\n"
> +			"    Unload previously loaded eBPF program"
> +			" for partciular RX/TX queue\n\n"
> +
> +			"port config (port_id) tx_metadata (value)\n"
> +			"    Set Tx metadata value per port.testpmd will add this value"
> +			" to any Tx packet sent from this port\n\n"
>  		);
>  	}
> 
> --
> 2.17.2
  

+1

>
> Could you categorize this related TM commands to a new group? As you know,
> the commands in "help config" almost over flow.
>
> Thanks
> Jingjing
>
>