diff mbox series

[2/2] net/ixgbe: add support of loopback for X540/X550

Message ID 20190207173005.38372-2-julien.meunier@nokia.com (mailing list archive)
State Superseded, archived
Delegated to: Qi Zhang
Headers
Series [1/2] net/ixgbe: do not start on unsupported loopback mode |

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel-compilation success Compilation OK

Commit Message

Julien Meunier Feb. 7, 2019, 5:30 p.m. UTC 
  Loopback mode is also supported on X540 and X550 NICs, according to
their datasheet (section 15.2). The way to set it up is a little
different of the 82599.

Signed-off-by: Julien Meunier <julien.meunier@nokia.com>
---
v2:
- disable / enable autoneg when loopback is requested for X540 / X550
---
 drivers/net/ixgbe/base/ixgbe_type.h |  1 +
 drivers/net/ixgbe/base/ixgbe_x540.c | 26 ++++++++++++++++
 drivers/net/ixgbe/base/ixgbe_x540.h |  2 ++
 drivers/net/ixgbe/base/ixgbe_x550.c | 26 ++++++++++++++++
 drivers/net/ixgbe/base/ixgbe_x550.h |  1 +
 drivers/net/ixgbe/ixgbe_ethdev.h    |  5 ++-
 drivers/net/ixgbe/ixgbe_rxtx.c      | 61 +++++++++++++++++++++++++++++++++++--
 7 files changed, 117 insertions(+), 5 deletions(-)

Comments

Zhao1, Wei Feb. 12, 2019, 6:37 a.m. UTC | #1 
HI,  Meunier && qi

> -----Original Message-----
> From: Julien Meunier [mailto:julien.meunier@nokia.com]
> Sent: Friday, February 8, 2019 1:30 AM
> To: Ananyev, Konstantin <konstantin.ananyev@intel.com>; Lu, Wenzhuo
> <wenzhuo.lu@intel.com>; Zhao1, Wei <wei.zhao1@intel.com>; Zhang, Qi Z
> <qi.z.zhang@intel.com>
> Cc: dev@dpdk.org
> Subject: [PATCH 2/2] net/ixgbe: add support of loopback for X540/X550
> 
> Loopback mode is also supported on X540 and X550 NICs, according to their
> datasheet (section 15.2). The way to set it up is a little different of the 82599.
> 
> Signed-off-by: Julien Meunier <julien.meunier@nokia.com>
> ---
> v2:
> - disable / enable autoneg when loopback is requested for X540 / X550
> ---
>  drivers/net/ixgbe/base/ixgbe_type.h |  1 +
> drivers/net/ixgbe/base/ixgbe_x540.c | 26 ++++++++++++++++
> drivers/net/ixgbe/base/ixgbe_x540.h |  2 ++
> drivers/net/ixgbe/base/ixgbe_x550.c | 26 ++++++++++++++++
> drivers/net/ixgbe/base/ixgbe_x550.h |  1 +
>  drivers/net/ixgbe/ixgbe_ethdev.h    |  5 ++-
>  drivers/net/ixgbe/ixgbe_rxtx.c      | 61
> +++++++++++++++++++++++++++++++++++--
>  7 files changed, 117 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ixgbe/base/ixgbe_type.h
> b/drivers/net/ixgbe/base/ixgbe_type.h
> index 077b8f0..c4af31e 100644
> --- a/drivers/net/ixgbe/base/ixgbe_type.h
> +++ b/drivers/net/ixgbe/base/ixgbe_type.h
> @@ -1649,6 +1649,7 @@ struct ixgbe_dmac_config {
>  #define IXGBE_MII_5GBASE_T_ADVERTISE		0x0800
>  #define IXGBE_MII_100BASE_T_ADVERTISE		0x0100 /* full duplex,
> bit:8 */
>  #define IXGBE_MII_100BASE_T_ADVERTISE_HALF	0x0080 /* half duplex,
> bit:7 */
> +#define IXGBE_MII_AUTONEG_ENABLE		0x1000
>  #define IXGBE_MII_RESTART			0x200
>  #define IXGBE_MII_AUTONEG_COMPLETE		0x20
>  #define IXGBE_MII_AUTONEG_LINK_UP		0x04
> diff --git a/drivers/net/ixgbe/base/ixgbe_x540.c
> b/drivers/net/ixgbe/base/ixgbe_x540.c
> index f00f0ea..a241d41 100644
> --- a/drivers/net/ixgbe/base/ixgbe_x540.c
> +++ b/drivers/net/ixgbe/base/ixgbe_x540.c


Is it possible to add these two function of ixgbe_setup_phy_autoneg_x540 and 
ixgbe_setup_phy_autoneg_x550 in a file out of base folder? We need to avoid
change code in that, is that right? @qi
And also, it seems these 2 function do not have much difference, 
can we use one instead of two function?(This point is not so important)



> @@ -1032,3 +1032,29 @@ s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw
> *hw, u32 index)
> 
>  	return IXGBE_SUCCESS;
>  }
> +
> +/*
> + *  ixgbe_setup_phy_link_x540 - Enable/disable the autoneg
> + *  @hw: pointer to hardware structure
> + *  enable: enable/disable the autoneg
> + **/
> +s32 ixgbe_setup_phy_autoneg_x540(struct ixgbe_hw *hw, bool enable) {
> +	s32 status = IXGBE_SUCCESS;
> +	u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
> +
> +	DEBUGFUNC("ixgbe_setup_phy_autoneg_x540");
> +
> +	hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
> +			     IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
> &autoneg_reg);
> +
> +	if (enable)
> +		autoneg_reg |= IXGBE_MII_AUTONEG_ENABLE;
> +	else
> +		autoneg_reg &= ~IXGBE_MII_AUTONEG_ENABLE;
> +
> +	hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
> +			      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
> autoneg_reg);
> +
> +	return status;
> +}
> diff --git a/drivers/net/ixgbe/base/ixgbe_x540.h
> b/drivers/net/ixgbe/base/ixgbe_x540.h
> index 231dfe5..ef939ce 100644
> --- a/drivers/net/ixgbe/base/ixgbe_x540.h
> +++ b/drivers/net/ixgbe/base/ixgbe_x540.h
> @@ -34,5 +34,7 @@ void ixgbe_init_swfw_sync_X540(struct ixgbe_hw *hw);
> 
>  s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index);
>  s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index);
> +
> +s32 ixgbe_setup_phy_autoneg_x540(struct ixgbe_hw *hw, bool enable);

The Space line seems not needed.

>  #endif /* _IXGBE_X540_H_ */
> 
> diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c
> b/drivers/net/ixgbe/base/ixgbe_x550.c
> index a920a14..f4ee188 100644
> --- a/drivers/net/ixgbe/base/ixgbe_x550.c
> +++ b/drivers/net/ixgbe/base/ixgbe_x550.c
> @@ -4652,3 +4652,29 @@ bool ixgbe_fw_recovery_mode_X550(struct
> ixgbe_hw *hw)
> 
>  	return !!(fwsm & IXGBE_FWSM_FW_NVM_RECOVERY_MODE);  }
> +
> +/*
> + *  ixgbe_setup_phy_link_x550 - Enable/disable the autoneg
> + *  @hw: pointer to hardware structure
> + *  enable: enable/disable the autoneg
> + **/
> +s32 ixgbe_setup_phy_autoneg_x550(struct ixgbe_hw *hw, bool enable) {
> +	s32 status = IXGBE_SUCCESS;
> +	u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
> +
> +	DEBUGFUNC("ixgbe_setup_phy_autoneg_x550");
> +
> +	hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
> +			     IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
> &autoneg_reg);
> +
> +	if (enable)
> +		autoneg_reg |= IXGBE_MII_AUTONEG_ENABLE;
> +	else
> +		autoneg_reg &= ~IXGBE_MII_AUTONEG_ENABLE;
> +
> +	hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
> +			      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
> autoneg_reg);
> +
> +	return status;
> +}
> diff --git a/drivers/net/ixgbe/base/ixgbe_x550.h
> b/drivers/net/ixgbe/base/ixgbe_x550.h
> index 3bd98f2..dd4fa18 100644
> --- a/drivers/net/ixgbe/base/ixgbe_x550.h
> +++ b/drivers/net/ixgbe/base/ixgbe_x550.h
> @@ -93,4 +93,5 @@ s32 ixgbe_identify_sfp_module_X550em(struct
> ixgbe_hw *hw);
>  s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx);
>  s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx);  bool
> ixgbe_fw_recovery_mode_X550(struct ixgbe_hw *hw);
> +s32 ixgbe_setup_phy_autoneg_x550(struct ixgbe_hw *hw, bool enable);
>  #endif /* _IXGBE_X550_H_ */
> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h
> b/drivers/net/ixgbe/ixgbe_ethdev.h
> index 565c69c..c60a697 100644
> --- a/drivers/net/ixgbe/ixgbe_ethdev.h
> +++ b/drivers/net/ixgbe/ixgbe_ethdev.h
> @@ -65,9 +65,8 @@
>  #define IXGBE_QUEUE_ITR_INTERVAL_DEFAULT	500 /* 500us */
> 
>  /* Loopback operation modes */
> -/* 82599 specific loopback operation types */
> -#define IXGBE_LPBK_82599_NONE   0x0 /* Default value. Loopback is
> disabled. */
> -#define IXGBE_LPBK_82599_TX_RX  0x1 /* Tx->Rx loopback operation is
> enabled. */
> +#define IXGBE_LPBK_NONE   0x0 /* Default value. Loopback is disabled. */
> +#define IXGBE_LPBK_TX_RX  0x1 /* Tx->Rx loopback operation is enabled.
> +*/
> 
>  #define IXGBE_MAX_JUMBO_FRAME_SIZE      0x2600 /* Maximum Jumbo
> frame size. */
> 
> diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
> index c9a70a8..1472d13 100644
> --- a/drivers/net/ixgbe/ixgbe_rxtx.c
> +++ b/drivers/net/ixgbe/ixgbe_rxtx.c
> @@ -49,6 +49,8 @@
>  #include "ixgbe_ethdev.h"
>  #include "base/ixgbe_dcb.h"
>  #include "base/ixgbe_common.h"
> +#include "base/ixgbe_x540.h"
> +#include "base/ixgbe_x550.h"
>  #include "ixgbe_rxtx.h"
> 
>  #ifdef RTE_LIBRTE_IEEE1588
> @@ -3174,6 +3176,7 @@ ixgbe_dev_clear_queues(struct rte_eth_dev *dev)
>  	unsigned i;
>  	struct ixgbe_adapter *adapter =
>  		(struct ixgbe_adapter *)dev->data->dev_private;
> +	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> 
>  	PMD_INIT_FUNC_TRACE();
> 
> @@ -3194,6 +3197,15 @@ ixgbe_dev_clear_queues(struct rte_eth_dev
> *dev)
>  			ixgbe_reset_rx_queue(adapter, rxq);
>  		}
>  	}
> +	/* If loopback mode was enabled, reconfigure the link accordingly */
> +	if (dev->data->dev_conf.lpbk_mode != 0) {
> +		if (hw->mac.type == ixgbe_mac_X540)
> +			ixgbe_setup_phy_autoneg_x540(hw, true);
> +		else if (hw->mac.type == ixgbe_mac_X550 ||
> +		     hw->mac.type == ixgbe_mac_X550EM_x ||
> +		     hw->mac.type == ixgbe_mac_X550EM_a)
> +			ixgbe_setup_phy_autoneg_x550(hw, true);
> +	}
>  }
> 
>  void
> @@ -5074,8 +5086,12 @@ ixgbe_check_supported_loopback_mode(struct
> rte_eth_dev *dev)  {
>  	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> 
> -	if (dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
> -		if (hw->mac.type == ixgbe_mac_82599EB)
> +	if (dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_TX_RX)
> +		if (hw->mac.type == ixgbe_mac_82599EB ||
> +		     hw->mac.type == ixgbe_mac_X540 ||
> +		     hw->mac.type == ixgbe_mac_X550 ||
> +		     hw->mac.type == ixgbe_mac_X550EM_x ||
> +		     hw->mac.type == ixgbe_mac_X550EM_a)
>  			return 0;
> 
>  	return -ENOTSUP;
> @@ -5108,6 +5124,41 @@ ixgbe_setup_loopback_link_82599(struct
> ixgbe_hw *hw)
>  	msec_delay(50);
>  }
> 
> +/*
> + * Set up link loopback for X540 mode Tx->Rx.
> + */
> +static inline void __attribute__((cold))
> +ixgbe_setup_loopback_link_x540(struct ixgbe_hw *hw) {
> +	uint32_t macc;
> +	PMD_INIT_FUNC_TRACE();
> +
> +	/* datasheet 15.2.1: disable AUTONEG (PHY Bit 7.0.C) */
> +	ixgbe_setup_phy_autoneg_x540(hw, false);
> +
> +	/* datasheet 15.2.1: MACC.FLU = 1 (force link up) */
> +	macc = IXGBE_READ_REG(hw, IXGBE_MACC);
> +	macc |= IXGBE_MACC_FLU;
> +	IXGBE_WRITE_REG(hw, IXGBE_MACC, macc); }
> +
> +/*
> + * Set up link loopback for X550 mode Tx->Rx.
> + */
> +static inline void __attribute__((cold))
> +ixgbe_setup_loopback_link_x550(struct ixgbe_hw *hw) {
> +	uint32_t macc;
> +	PMD_INIT_FUNC_TRACE();
> +
> +	/* datasheet 15.2.1: disable AUTONEG (PHY Bit 7.0.C) */
> +	ixgbe_setup_phy_autoneg_x550(hw, false);
> +
> +	/* datasheet 15.2.1: MACC.FLU = 1 (force link up) */
> +	macc = IXGBE_READ_REG(hw, IXGBE_MACC);
> +	macc |= IXGBE_MACC_FLU;
> +	IXGBE_WRITE_REG(hw, IXGBE_MACC, macc); }
> 
>  /*
>   * Start Transmit and Receive Units.
> @@ -5172,6 +5223,12 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
>  	if (dev->data->dev_conf.lpbk_mode != 0) {
>  		if (hw->mac.type == ixgbe_mac_82599EB)
>  			ixgbe_setup_loopback_link_82599(hw);
> +		else if (hw->mac.type == ixgbe_mac_X540)
> +			ixgbe_setup_loopback_link_x540(hw);
> +		else if (hw->mac.type == ixgbe_mac_X550 ||
> +		     hw->mac.type == ixgbe_mac_X550EM_x ||
> +		     hw->mac.type == ixgbe_mac_X550EM_a)
> +			ixgbe_setup_loopback_link_x550(hw);

The same, why do we have 2 branch for x540 and x550?

>  	}
> 
>  #ifdef RTE_LIBRTE_SECURITY
> --
> 2.10.2
Julien Meunier Feb. 18, 2019, 11:20 a.m. UTC | #2 
Hi all,

Sorry for the delay. See my reply inline.

On 12/02/2019 07:37, Zhao1, Wei wrote:
> HI,  Meunier && qi
> 
> Is it possible to add these two function of ixgbe_setup_phy_autoneg_x540 and
> ixgbe_setup_phy_autoneg_x550 in a file out of base folder? We need to avoid
> change code in that, is that right? @qi
> And also, it seems these 2 function do not have much difference,
> can we use one instead of two function?(This point is not so important)

OK, no problem. I had some doubts when I modified these files.
So, I guess it's OK for you to have direct PHY operations (hw->phy.ops. 
[read|write]_reg) in ixgbe_rxtx.c ?


>>    * Start Transmit and Receive Units.
>> @@ -5172,6 +5223,12 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
>>   	if (dev->data->dev_conf.lpbk_mode != 0) {
>>   		if (hw->mac.type == ixgbe_mac_82599EB)
>>   			ixgbe_setup_loopback_link_82599(hw);
>> +		else if (hw->mac.type == ixgbe_mac_X540)
>> +			ixgbe_setup_loopback_link_x540(hw);
>> +		else if (hw->mac.type == ixgbe_mac_X550 ||
>> +		     hw->mac.type == ixgbe_mac_X550EM_x ||
>> +		     hw->mac.type == ixgbe_mac_X550EM_a)
>> +			ixgbe_setup_loopback_link_x550(hw);
> 
> The same, why do we have 2 branch for x540 and x550?
> 

I just wanted to respect the initial rule: 1 model = 1 function. But I 
can merge them in one function as it's the same mechanism in order to 
setup the loopback.

I will update a new patchset today.

Best regards,
Julien Meunier
diff mbox series

Patch

diff --git a/drivers/net/ixgbe/base/ixgbe_type.h b/drivers/net/ixgbe/base/ixgbe_type.h
index 077b8f0..c4af31e 100644
--- a/drivers/net/ixgbe/base/ixgbe_type.h
+++ b/drivers/net/ixgbe/base/ixgbe_type.h
@@ -1649,6 +1649,7 @@  struct ixgbe_dmac_config {
 #define IXGBE_MII_5GBASE_T_ADVERTISE		0x0800
 #define IXGBE_MII_100BASE_T_ADVERTISE		0x0100 /* full duplex, bit:8 */
 #define IXGBE_MII_100BASE_T_ADVERTISE_HALF	0x0080 /* half duplex, bit:7 */
+#define IXGBE_MII_AUTONEG_ENABLE		0x1000
 #define IXGBE_MII_RESTART			0x200
 #define IXGBE_MII_AUTONEG_COMPLETE		0x20
 #define IXGBE_MII_AUTONEG_LINK_UP		0x04
diff --git a/drivers/net/ixgbe/base/ixgbe_x540.c b/drivers/net/ixgbe/base/ixgbe_x540.c
index f00f0ea..a241d41 100644
--- a/drivers/net/ixgbe/base/ixgbe_x540.c
+++ b/drivers/net/ixgbe/base/ixgbe_x540.c
@@ -1032,3 +1032,29 @@  s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
 
 	return IXGBE_SUCCESS;
 }
+
+/*
+ *  ixgbe_setup_phy_link_x540 - Enable/disable the autoneg
+ *  @hw: pointer to hardware structure
+ *  enable: enable/disable the autoneg
+ **/
+s32 ixgbe_setup_phy_autoneg_x540(struct ixgbe_hw *hw, bool enable)
+{
+	s32 status = IXGBE_SUCCESS;
+	u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+
+	DEBUGFUNC("ixgbe_setup_phy_autoneg_x540");
+
+	hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+			     IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+
+	if (enable)
+		autoneg_reg |= IXGBE_MII_AUTONEG_ENABLE;
+	else
+		autoneg_reg &= ~IXGBE_MII_AUTONEG_ENABLE;
+
+	hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+			      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+
+	return status;
+}
diff --git a/drivers/net/ixgbe/base/ixgbe_x540.h b/drivers/net/ixgbe/base/ixgbe_x540.h
index 231dfe5..ef939ce 100644
--- a/drivers/net/ixgbe/base/ixgbe_x540.h
+++ b/drivers/net/ixgbe/base/ixgbe_x540.h
@@ -34,5 +34,7 @@  void ixgbe_init_swfw_sync_X540(struct ixgbe_hw *hw);
 
 s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index);
 s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index);
+
+s32 ixgbe_setup_phy_autoneg_x540(struct ixgbe_hw *hw, bool enable);
 #endif /* _IXGBE_X540_H_ */
 
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index a920a14..f4ee188 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -4652,3 +4652,29 @@  bool ixgbe_fw_recovery_mode_X550(struct ixgbe_hw *hw)
 
 	return !!(fwsm & IXGBE_FWSM_FW_NVM_RECOVERY_MODE);
 }
+
+/*
+ *  ixgbe_setup_phy_link_x550 - Enable/disable the autoneg
+ *  @hw: pointer to hardware structure
+ *  enable: enable/disable the autoneg
+ **/
+s32 ixgbe_setup_phy_autoneg_x550(struct ixgbe_hw *hw, bool enable)
+{
+	s32 status = IXGBE_SUCCESS;
+	u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+
+	DEBUGFUNC("ixgbe_setup_phy_autoneg_x550");
+
+	hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+			     IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+
+	if (enable)
+		autoneg_reg |= IXGBE_MII_AUTONEG_ENABLE;
+	else
+		autoneg_reg &= ~IXGBE_MII_AUTONEG_ENABLE;
+
+	hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+			      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+
+	return status;
+}
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.h b/drivers/net/ixgbe/base/ixgbe_x550.h
index 3bd98f2..dd4fa18 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.h
+++ b/drivers/net/ixgbe/base/ixgbe_x550.h
@@ -93,4 +93,5 @@  s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw);
 s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx);
 s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx);
 bool ixgbe_fw_recovery_mode_X550(struct ixgbe_hw *hw);
+s32 ixgbe_setup_phy_autoneg_x550(struct ixgbe_hw *hw, bool enable);
 #endif /* _IXGBE_X550_H_ */
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index 565c69c..c60a697 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -65,9 +65,8 @@ 
 #define IXGBE_QUEUE_ITR_INTERVAL_DEFAULT	500 /* 500us */
 
 /* Loopback operation modes */
-/* 82599 specific loopback operation types */
-#define IXGBE_LPBK_82599_NONE   0x0 /* Default value. Loopback is disabled. */
-#define IXGBE_LPBK_82599_TX_RX  0x1 /* Tx->Rx loopback operation is enabled. */
+#define IXGBE_LPBK_NONE   0x0 /* Default value. Loopback is disabled. */
+#define IXGBE_LPBK_TX_RX  0x1 /* Tx->Rx loopback operation is enabled. */
 
 #define IXGBE_MAX_JUMBO_FRAME_SIZE      0x2600 /* Maximum Jumbo frame size. */
 
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index c9a70a8..1472d13 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -49,6 +49,8 @@ 
 #include "ixgbe_ethdev.h"
 #include "base/ixgbe_dcb.h"
 #include "base/ixgbe_common.h"
+#include "base/ixgbe_x540.h"
+#include "base/ixgbe_x550.h"
 #include "ixgbe_rxtx.h"
 
 #ifdef RTE_LIBRTE_IEEE1588
@@ -3174,6 +3176,7 @@  ixgbe_dev_clear_queues(struct rte_eth_dev *dev)
 	unsigned i;
 	struct ixgbe_adapter *adapter =
 		(struct ixgbe_adapter *)dev->data->dev_private;
+	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 
 	PMD_INIT_FUNC_TRACE();
 
@@ -3194,6 +3197,15 @@  ixgbe_dev_clear_queues(struct rte_eth_dev *dev)
 			ixgbe_reset_rx_queue(adapter, rxq);
 		}
 	}
+	/* If loopback mode was enabled, reconfigure the link accordingly */
+	if (dev->data->dev_conf.lpbk_mode != 0) {
+		if (hw->mac.type == ixgbe_mac_X540)
+			ixgbe_setup_phy_autoneg_x540(hw, true);
+		else if (hw->mac.type == ixgbe_mac_X550 ||
+		     hw->mac.type == ixgbe_mac_X550EM_x ||
+		     hw->mac.type == ixgbe_mac_X550EM_a)
+			ixgbe_setup_phy_autoneg_x550(hw, true);
+	}
 }
 
 void
@@ -5074,8 +5086,12 @@  ixgbe_check_supported_loopback_mode(struct rte_eth_dev *dev)
 {
 	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 
-	if (dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
-		if (hw->mac.type == ixgbe_mac_82599EB)
+	if (dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_TX_RX)
+		if (hw->mac.type == ixgbe_mac_82599EB ||
+		     hw->mac.type == ixgbe_mac_X540 ||
+		     hw->mac.type == ixgbe_mac_X550 ||
+		     hw->mac.type == ixgbe_mac_X550EM_x ||
+		     hw->mac.type == ixgbe_mac_X550EM_a)
 			return 0;
 
 	return -ENOTSUP;
@@ -5108,6 +5124,41 @@  ixgbe_setup_loopback_link_82599(struct ixgbe_hw *hw)
 	msec_delay(50);
 }
 
+/*
+ * Set up link loopback for X540 mode Tx->Rx.
+ */
+static inline void __attribute__((cold))
+ixgbe_setup_loopback_link_x540(struct ixgbe_hw *hw)
+{
+	uint32_t macc;
+	PMD_INIT_FUNC_TRACE();
+
+	/* datasheet 15.2.1: disable AUTONEG (PHY Bit 7.0.C) */
+	ixgbe_setup_phy_autoneg_x540(hw, false);
+
+	/* datasheet 15.2.1: MACC.FLU = 1 (force link up) */
+	macc = IXGBE_READ_REG(hw, IXGBE_MACC);
+	macc |= IXGBE_MACC_FLU;
+	IXGBE_WRITE_REG(hw, IXGBE_MACC, macc);
+}
+
+/*
+ * Set up link loopback for X550 mode Tx->Rx.
+ */
+static inline void __attribute__((cold))
+ixgbe_setup_loopback_link_x550(struct ixgbe_hw *hw)
+{
+	uint32_t macc;
+	PMD_INIT_FUNC_TRACE();
+
+	/* datasheet 15.2.1: disable AUTONEG (PHY Bit 7.0.C) */
+	ixgbe_setup_phy_autoneg_x550(hw, false);
+
+	/* datasheet 15.2.1: MACC.FLU = 1 (force link up) */
+	macc = IXGBE_READ_REG(hw, IXGBE_MACC);
+	macc |= IXGBE_MACC_FLU;
+	IXGBE_WRITE_REG(hw, IXGBE_MACC, macc);
+}
 
 /*
  * Start Transmit and Receive Units.
@@ -5172,6 +5223,12 @@  ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
 	if (dev->data->dev_conf.lpbk_mode != 0) {
 		if (hw->mac.type == ixgbe_mac_82599EB)
 			ixgbe_setup_loopback_link_82599(hw);
+		else if (hw->mac.type == ixgbe_mac_X540)
+			ixgbe_setup_loopback_link_x540(hw);
+		else if (hw->mac.type == ixgbe_mac_X550 ||
+		     hw->mac.type == ixgbe_mac_X550EM_x ||
+		     hw->mac.type == ixgbe_mac_X550EM_a)
+			ixgbe_setup_loopback_link_x550(hw);
 	}
 
 #ifdef RTE_LIBRTE_SECURITY