@@ -586,6 +586,14 @@ F: drivers/net/mvpp2/
F: doc/guides/nics/mvpp2.rst
F: doc/guides/nics/features/mvpp2.ini
+Marvell mvneta
+M: Zyta Szpak <zr@semihalf.com>
+M: Dmitri Epshtein <dima@marvell.com>
+M: Natalie Samsonov <nsamsono@marvell.com>
+F: drivers/net/mvneta/
+F: doc/guides/nics/mvneta.rst
+F: doc/guides/nics/features/mvneta.ini
+
Mellanox mlx4
M: Matan Azrad <matan@mellanox.com>
M: Shahaf Shuler <shahafs@mellanox.com>
@@ -400,6 +400,11 @@ CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
+# Compile Marvell MVNETA PMD driver
+#
+CONFIG_RTE_LIBRTE_MVNETA_PMD=n
+
+#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
@@ -182,6 +182,8 @@ config () # <directory> <target> <options>
sed -ri 's,(PMD_MVSAM_CRYPTO=)n,\1y,' $1/.config
test -z "$LIBMUSDK_PATH" || \
sed -ri 's,(MVPP2_PMD=)n,\1y,' $1/.config
+ test -z "$LIBMUSDK_PATH" || \
+ sed -ri 's,(MVNETA_PMD=)n,\1y,' $1/.config
build_config_hook $1 $2 $3
# Explicit enabler/disabler (uppercase)
new file mode 100644
@@ -0,0 +1,11 @@
+;
+; Supported features of the 'mvneta' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Speed capabilities = Y
+Jumbo frame = Y
+CRC offload = Y
+ARMv8 = Y
+Usage doc = Y
new file mode 100644
@@ -0,0 +1,152 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2018 Marvell International Ltd.
+ Copyright(c) 2018 Semihalf.
+ All rights reserved.
+
+MVNETA Poll Mode Driver
+=======================
+
+The MVNETA PMD (librte_pmd_mvneta) provides poll mode driver support
+for the Marvell NETA 1/2.5 Gbps adapter.
+
+Detailed information about SoCs that use PPv2 can be obtained here:
+
+* https://www.marvell.com/embedded-processors/armada-3700/
+
+.. Note::
+
+ Due to external dependencies, this driver is disabled by default. It must
+ be enabled manually by setting relevant configuration option manually.
+ Please refer to `Config File Options`_ section for further details.
+
+
+Features
+--------
+
+Features of the MVNETA PMD are:
+
+- Start/stop
+- tx/rx_queue_setup
+- Speed capabilities
+- Jumbo frame
+- CRC offload
+
+
+Limitations
+-----------
+
+- Flushing vlans added for filtering is not possible due to MUSDK missing
+ functionality. Current workaround is to reset board so that NETA has a
+ chance to start in a sane state.
+
+Prerequisites
+-------------
+
+- Custom Linux Kernel sources
+
+ .. code-block:: console
+
+ git clone https://github.com/MarvellEmbeddedProcessors/linux-marvell.git -b linux-4.4.52-armada-17.10
+
+
+- MUSDK (Marvell User-Space SDK) sources
+
+ .. code-block:: console
+
+ git clone git@github.com:Semihalf/marvell-dpdk.git -b musdk-armada-17.10-mvneta
+
+ MUSDK is a light-weight library that provides direct access to Marvell's
+ NETA. Alternatively prebuilt MUSDK library can be
+ requested from `Marvell Extranet <https://extranet.marvell.com>`_. Once
+ approval has been granted, library can be found by typing ``musdk`` in
+ the search box.
+
+ MUSDK must be configured with the following features:
+
+ .. code-block:: console
+
+ --enable-bpool-dma=64 --enable-pp2=no --enable-neta
+
+- DPDK environment
+
+ Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup
+ DPDK environment.
+
+
+Config File Options
+-------------------
+
+The following options can be modified in the ``config`` file.
+
+- ``CONFIG_RTE_LIBRTE_MVNETA_PMD`` (default ``n``)
+
+ Toggle compilation of the librte_pmd_mvneta driver.
+
+
+Usage example
+^^^^^^^^^^^^^
+
+.. code-block:: console
+
+ ./testpmd --vdev=net_mvneta,iface=eth0,iface=eth1 \
+ -c 3 -- -i --p 3 -a
+
+
+Building DPDK
+-------------
+
+Driver needs precompiled MUSDK library during compilation.
+
+.. code-block:: console
+
+ export CROSS_COMPILE=<toolchain>/bin/aarch64-linux-gnu-
+ ./bootstrap
+ ./configure --host=aarch64-linux-gnu --enable-bpool-dma=64
+ make install
+
+MUSDK will be installed to `usr/local` under current directory.
+For the detailed build instructions please consult ``doc/musdk_get_started.txt``.
+
+Before the DPDK build process the environmental variable ``LIBMUSDK_PATH`` with
+the path to the MUSDK installation directory needs to be exported.
+
+.. code-block:: console
+
+ export LIBMUSDK_PATH=<musdk>/usr/local
+ export CROSS=aarch64-linux-gnu-
+ make config T=arm64-armv8a-linuxapp-gcc
+ sed -ri 's,(MVNETA_PMD=)n,\1y,' build/.config
+ make
+
+Usage Example
+-------------
+
+MVNETA PMD requires extra out of tree kernel modules to function properly.
+`musdk_uio` and `mv_neta_uio` sources are part of the MUSDK. Please consult
+``doc/musdk_get_started.txt`` for the detailed build instructions.
+
+.. code-block:: console
+
+ insmod musdk_uio.ko
+ insmod mv_neta_uio.ko
+
+Additionally interfaces used by DPDK application need to be put up:
+
+.. code-block:: console
+
+ ip link set eth0 up
+ ip link set eth1 up
+
+In order to run testpmd example application following command can be used:
+
+.. code-block:: console
+
+ ./testpmd --vdev=net_mvneta,iface=eth0,iface=eth1 -c 3 -- \
+ -i --p 3 -a --txd 256 --rxd 128 --rxq=1 --txq=1 --nb-cores=1
+
+
+In order to run l2fwd example application following command can be used:
+
+.. code-block:: console
+
+ ./l2fwd --vdev=net_mvneta,iface=eth0,iface=eth1 -c 3 -- -T 1 -p 3
@@ -67,6 +67,10 @@ New Features
SR-IOV option in Hyper-V and Azure. This is an alternative to the previous
vdev_netvsc, tap, and failsafe drivers combination.
+* **Added a new net driver for Marvell Armada 3k device.**
+
+ Added the new ``mvneta`` net driver for Marvell Armada 3k device. See the
+ :doc:`../nics/mvneta` NIC guide for more details on this new driver.
API Changes
-----------
@@ -8,7 +8,9 @@ ifeq ($(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF)$(CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOO
DIRS-y += octeontx
endif
-ifeq ($(CONFIG_RTE_LIBRTE_MVPP2_PMD),y)
+MVEP-y := $(CONFIG_RTE_LIBRTE_MVPP2_PMD)
+MVEP-y += $(CONFIG_RTE_LIBRTE_MVNETA_PMD)
+ifneq (,$(findstring y,$(MVEP-y)))
DIRS-y += mvep
endif
@@ -11,6 +11,7 @@ enum mvep_module_type {
MVEP_MOD_T_NONE = 0,
MVEP_MOD_T_PP2,
MVEP_MOD_T_SAM,
+ MVEP_MOD_T_NETA,
MVEP_MOD_T_LAST
};
@@ -33,6 +33,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_LIO_PMD) += liquidio
DIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4
DIRS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5
DIRS-$(CONFIG_RTE_LIBRTE_MVPP2_PMD) += mvpp2
+DIRS-$(CONFIG_RTE_LIBRTE_MVNETA_PMD) += mvneta
DIRS-$(CONFIG_RTE_LIBRTE_NETVSC_PMD) += netvsc
DIRS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += nfp
DIRS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt
@@ -19,6 +19,7 @@ drivers = ['af_packet',
'kni',
'liquidio',
'mvpp2',
+ 'mvneta',
'netvsc',
'nfp',
'null', 'octeontx', 'pcap', 'ring',
new file mode 100644
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Marvell International Ltd.
+# Copyright(c) 2018 Semihalf.
+# All rights reserved.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+ifneq ($(MAKECMDGOALS),clean)
+ifneq ($(MAKECMDGOALS),config)
+ifeq ($(LIBMUSDK_PATH),)
+$(error "Please define LIBMUSDK_PATH environment variable")
+endif
+endif
+endif
+
+# library name
+LIB = librte_pmd_mvneta.a
+
+# library version
+LIBABIVER := 1
+
+# versioning export map
+EXPORT_MAP := rte_pmd_mvneta_version.map
+
+# external library dependencies
+CFLAGS += -I$(RTE_SDK)/drivers/common/mvep
+CFLAGS += -I$(LIBMUSDK_PATH)/include
+CFLAGS += -DMVCONF_TYPES_PUBLIC
+CFLAGS += -DMVCONF_DMA_PHYS_ADDR_T_PUBLIC
+CFLAGS += -DMVCONF_DMA_PHYS_ADDR_T_SIZE=64
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -O3
+LDLIBS += -L$(LIBMUSDK_PATH)/lib
+LDLIBS += -lmusdk
+LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
+LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_cfgfile
+LDLIBS += -lrte_bus_vdev
+
+# library source files
+SRCS-$(CONFIG_RTE_LIBRTE_MVNETA_PMD) += mvneta_ethdev.c
+
+include $(RTE_SDK)/mk/rte.lib.mk
new file mode 100644
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Marvell International Ltd.
+# Copyright(c) 2018 Semihalf.
+# All rights reserved.
+
+path = get_option('lib_musdk_dir')
+lib_dir = path + '/lib'
+inc_dir = path + '/include'
+
+lib = cc.find_library('libmusdk', dirs : [lib_dir], required: false)
+if not lib.found()
+ build = false
+else
+ ext_deps += lib
+ includes += include_directories(inc_dir)
+ cflags += [
+ '-DMVCONF_TYPES_PUBLIC',
+ '-DMVCONF_DMA_PHYS_ADDR_T_PUBLIC',
+ '-DMVCONF_DMA_PHYS_ADDR_T_SIZE=64'
+ ]
+endif
+
+sources = files(
+ 'mvneta_ethdev.c'
+)
+
+deps += ['cfgfile', 'common_mvep']
new file mode 100644
@@ -0,0 +1,629 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Marvell International Ltd.
+ * Copyright(c) 2018 Semihalf.
+ * All rights reserved.
+ */
+
+#include <rte_ethdev_driver.h>
+#include <rte_kvargs.h>
+#include <rte_log.h>
+#include <rte_malloc.h>
+#include <rte_bus_vdev.h>
+
+#include <stdio.h>
+#include <fcntl.h>
+#include <linux/ethtool.h>
+#include <linux/sockios.h>
+#include <net/if.h>
+#include <net/if_arp.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+
+#include <rte_mvep_common.h>
+
+#include "mvneta_ethdev.h"
+
+
+#define MVNETA_IFACE_NAME_ARG "iface"
+
+#define MVNETA_RX_OFFLOADS (DEV_RX_OFFLOAD_JUMBO_FRAME | \
+ DEV_RX_OFFLOAD_CHECKSUM)
+
+/** Port Tx offloads capabilities */
+#define MVNETA_TX_OFFLOADS (DEV_TX_OFFLOAD_IPV4_CKSUM | \
+ DEV_TX_OFFLOAD_UDP_CKSUM | \
+ DEV_TX_OFFLOAD_TCP_CKSUM | \
+ DEV_TX_OFFLOAD_MULTI_SEGS)
+
+#define MVNETA_PKT_SIZE_MAX (16382 - MV_MH_SIZE) /* 9700B */
+#define MVNETA_DEFAULT_MTU 1500
+
+#define MVNETA_MAC_ADDRS_MAX 256 /*16 UC, 256 IP, 256 MC/BC */
+/** Maximum length of a match string */
+#define MVNETA_MATCH_LEN 16
+
+int mvneta_logtype;
+
+static const char * const valid_args[] = {
+ MVNETA_IFACE_NAME_ARG,
+ NULL
+};
+
+struct mvneta_ifnames {
+ const char *names[NETA_NUM_ETH_PPIO];
+ int idx;
+};
+
+static int mvneta_dev_num;
+static int mvneta_lcore_first;
+static int mvneta_lcore_last;
+
+/**
+ * Deinitialize packet processor.
+ */
+static void
+mvneta_neta_deinit(void)
+{
+ neta_deinit();
+}
+
+/**
+ * Initialize packet processor.
+ *
+ * @return
+ * 0 on success, negative error value otherwise.
+ */
+static int
+mvneta_neta_init(void)
+{
+ return neta_init();
+}
+
+/**
+ * Callback used by rte_kvargs_process() during argument parsing.
+ *
+ * @param key
+ * Pointer to the parsed key (unused).
+ * @param value
+ * Pointer to the parsed value.
+ * @param extra_args
+ * Pointer to the extra arguments which contains address of the
+ * table of pointers to parsed interface names.
+ *
+ * @return
+ * Always 0.
+ */
+static int
+mvneta_ifnames_get(const char *key __rte_unused, const char *value,
+ void *extra_args)
+{
+ struct mvneta_ifnames *ifnames = extra_args;
+
+ ifnames->names[ifnames->idx++] = value;
+
+ return 0;
+}
+
+/**
+ * Ethernet device configuration.
+ *
+ * Prepare the driver for a given number of TX and RX queues and
+ * configure RSS if supported.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, negative error value otherwise.
+ */
+static int
+mvneta_dev_configure(struct rte_eth_dev *dev)
+{
+ struct mvneta_priv *priv = dev->data->dev_private;
+ struct neta_ppio_params *ppio_params;
+
+ if (dev->data->dev_conf.rxmode.mq_mode != ETH_MQ_RX_NONE) {
+ MVNETA_LOG(INFO, "Unsupported RSS and rx multi queue mode %d",
+ dev->data->dev_conf.rxmode.mq_mode);
+ if (dev->data->nb_rx_queues > 1)
+ return -EINVAL;
+ }
+
+ if (dev->data->dev_conf.rxmode.split_hdr_size) {
+ MVNETA_LOG(INFO, "Split headers not supported");
+ return -EINVAL;
+ }
+
+ if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME)
+ dev->data->mtu = dev->data->dev_conf.rxmode.max_rx_pkt_len -
+ MRVL_NETA_ETH_HDRS_LEN;
+
+ if (dev->data->dev_conf.txmode.offloads & DEV_TX_OFFLOAD_MULTI_SEGS)
+ priv->multiseg = 1;
+
+ ppio_params = &priv->ppio_params;
+ ppio_params->outqs_params.num_outqs = dev->data->nb_tx_queues;
+ priv->nb_rx_queues = dev->data->nb_rx_queues;
+ /* Default: 1 TC, no QoS supported. */
+ ppio_params->inqs_params.num_tcs = 1;
+ ppio_params->inqs_params.tcs_params[0].pkt_offset = MRVL_NETA_PKT_OFFS;
+ priv->ppio_id = dev->data->port_id;
+
+ return 0;
+}
+
+/**
+ * DPDK callback to get information about the device.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure (unused).
+ * @param info
+ * Info structure output buffer.
+ */
+static void
+mvneta_dev_infos_get(struct rte_eth_dev *dev __rte_unused,
+ struct rte_eth_dev_info *info)
+{
+ info->speed_capa = ETH_LINK_SPEED_10M |
+ ETH_LINK_SPEED_100M |
+ ETH_LINK_SPEED_1G |
+ ETH_LINK_SPEED_2_5G;
+
+ info->max_rx_queues = MRVL_NETA_RXQ_MAX;
+ info->max_tx_queues = MRVL_NETA_TXQ_MAX;
+ info->max_mac_addrs = MVNETA_MAC_ADDRS_MAX;
+
+ info->rx_desc_lim.nb_max = MRVL_NETA_RXD_MAX;
+ info->rx_desc_lim.nb_min = MRVL_NETA_RXD_MIN;
+ info->rx_desc_lim.nb_align = MRVL_NETA_RXD_ALIGN;
+
+ info->tx_desc_lim.nb_max = MRVL_NETA_TXD_MAX;
+ info->tx_desc_lim.nb_min = MRVL_NETA_TXD_MIN;
+ info->tx_desc_lim.nb_align = MRVL_NETA_TXD_ALIGN;
+
+ info->rx_offload_capa = MVNETA_RX_OFFLOADS;
+ info->rx_queue_offload_capa = MVNETA_RX_OFFLOADS;
+
+ info->tx_offload_capa = MVNETA_TX_OFFLOADS;
+ info->tx_queue_offload_capa = MVNETA_TX_OFFLOADS;
+
+ /* By default packets are dropped if no descriptors are available */
+ info->default_rxconf.rx_drop_en = 1;
+ /* Deferred tx queue start is not supported */
+ info->default_txconf.tx_deferred_start = 0;
+ info->default_txconf.offloads = 0;
+
+ info->max_rx_pktlen = MVNETA_PKT_SIZE_MAX;
+}
+
+/**
+ * Return supported packet types.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure (unused).
+ *
+ * @return
+ * Const pointer to the table with supported packet types.
+ */
+static const uint32_t *
+mvneta_dev_supported_ptypes_get(struct rte_eth_dev *dev __rte_unused)
+{
+ static const uint32_t ptypes[] = {
+ RTE_PTYPE_L2_ETHER,
+ RTE_PTYPE_L2_ETHER_VLAN,
+ RTE_PTYPE_L3_IPV4,
+ RTE_PTYPE_L3_IPV6,
+ RTE_PTYPE_L4_TCP,
+ RTE_PTYPE_L4_UDP
+ };
+
+ return ptypes;
+}
+
+/**
+ * DPDK callback to bring the link up.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, negative error value otherwise.
+ */
+static int
+mvneta_dev_set_link_up(struct rte_eth_dev *dev)
+{
+ struct mvneta_priv *priv = dev->data->dev_private;
+
+ if (!priv->ppio)
+ return 0;
+
+ return neta_ppio_enable(priv->ppio);
+}
+
+/**
+ * DPDK callback to bring the link down.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, negative error value otherwise.
+ */
+static int
+mvneta_dev_set_link_down(struct rte_eth_dev *dev)
+{
+ struct mvneta_priv *priv = dev->data->dev_private;
+
+ if (!priv->ppio)
+ return 0;
+
+ return neta_ppio_disable(priv->ppio);
+}
+
+/**
+ * DPDK callback to start the device.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mvneta_dev_start(struct rte_eth_dev *dev)
+{
+ struct mvneta_priv *priv = dev->data->dev_private;
+ char match[MVNETA_MATCH_LEN];
+ int ret = 0, i;
+
+ if (priv->ppio)
+ return mvneta_dev_set_link_up(dev);
+
+ snprintf(match, sizeof(match), "%s", dev->data->name);
+ priv->ppio_params.match = match;
+ priv->ppio_params.inqs_params.mtu = dev->data->mtu;
+
+ ret = neta_ppio_init(&priv->ppio_params, &priv->ppio);
+ if (ret) {
+ MVNETA_LOG(ERR, "Failed to init ppio");
+ return ret;
+ }
+ priv->ppio_id = priv->ppio->port_id;
+
+ /*
+ * In case there are some some stale uc/mc mac addresses flush them
+ * here. It cannot be done during mvneta_dev_close() as port information
+ * is already gone at that point (due to neta_ppio_deinit() in
+ * mvneta_dev_stop()).
+ */
+ if (!priv->uc_mc_flushed) {
+ ret = neta_ppio_flush_mac_addrs(priv->ppio, 0, 1);
+ if (ret) {
+ MVNETA_LOG(ERR,
+ "Failed to flush uc/mc filter list");
+ goto out;
+ }
+ priv->uc_mc_flushed = 1;
+ }
+
+ ret = mvneta_dev_set_link_up(dev);
+ if (ret) {
+ MVNETA_LOG(ERR, "Failed to set link up");
+ goto out;
+ }
+
+ /* start tx queues */
+ for (i = 0; i < dev->data->nb_tx_queues; i++)
+ dev->data->tx_queue_state[i] = RTE_ETH_QUEUE_STATE_STARTED;
+
+ return 0;
+
+out:
+ MVNETA_LOG(ERR, "Failed to start device");
+ neta_ppio_deinit(priv->ppio);
+ return ret;
+}
+
+/**
+ * DPDK callback to stop the device.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mvneta_dev_stop(struct rte_eth_dev *dev)
+{
+ struct mvneta_priv *priv = dev->data->dev_private;
+
+ if (!priv->ppio)
+ return;
+
+ mvneta_dev_set_link_down(dev);
+
+ neta_ppio_deinit(priv->ppio);
+
+ priv->ppio = NULL;
+}
+
+/**
+ * DPDK callback to close the device.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mvneta_dev_close(struct rte_eth_dev *dev)
+{
+ struct mvneta_priv *priv = dev->data->dev_private;
+
+ if (priv->ppio)
+ mvneta_dev_stop(dev);
+}
+
+/**
+ * DPDK callback to set the primary MAC address.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param mac_addr
+ * MAC address to register.
+ */
+static int
+mvneta_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
+{
+ struct mvneta_priv *priv = dev->data->dev_private;
+ int ret;
+
+ if (!priv->ppio)
+ return -EINVAL;
+
+ ret = neta_ppio_set_mac_addr(priv->ppio, mac_addr->addr_bytes);
+ if (ret) {
+ char buf[ETHER_ADDR_FMT_SIZE];
+ ether_format_addr(buf, sizeof(buf), mac_addr);
+ MVNETA_LOG(ERR, "Failed to set mac to %s", buf);
+ }
+ return 0;
+}
+
+static const struct eth_dev_ops mvneta_ops = {
+ .dev_configure = mvneta_dev_configure,
+ .dev_start = mvneta_dev_start,
+ .dev_stop = mvneta_dev_stop,
+ .dev_set_link_up = mvneta_dev_set_link_up,
+ .dev_set_link_down = mvneta_dev_set_link_down,
+ .dev_close = mvneta_dev_close,
+ .mac_addr_set = mvneta_mac_addr_set,
+ .dev_infos_get = mvneta_dev_infos_get,
+ .dev_supported_ptypes_get = mvneta_dev_supported_ptypes_get,
+};
+
+/**
+ * Create device representing Ethernet port.
+ *
+ * @param name
+ * Pointer to the port's name.
+ *
+ * @return
+ * 0 on success, negative error value otherwise.
+ */
+static int
+mvneta_eth_dev_create(struct rte_vdev_device *vdev, const char *name)
+{
+ int ret, fd = socket(AF_INET, SOCK_DGRAM, 0);
+ struct rte_eth_dev *eth_dev;
+ struct mvneta_priv *priv;
+ struct ifreq req;
+
+ eth_dev = rte_eth_dev_allocate(name);
+ if (!eth_dev)
+ return -ENOMEM;
+
+ priv = rte_zmalloc_socket(name, sizeof(*priv), 0, rte_socket_id());
+ if (!priv) {
+ ret = -ENOMEM;
+ goto out_free_dev;
+ }
+
+ eth_dev->data->mac_addrs =
+ rte_zmalloc("mac_addrs",
+ ETHER_ADDR_LEN * MVNETA_MAC_ADDRS_MAX, 0);
+ if (!eth_dev->data->mac_addrs) {
+ MVNETA_LOG(ERR, "Failed to allocate space for eth addrs");
+ ret = -ENOMEM;
+ goto out_free_priv;
+ }
+
+ memset(&req, 0, sizeof(req));
+ strcpy(req.ifr_name, name);
+ ret = ioctl(fd, SIOCGIFHWADDR, &req);
+ if (ret)
+ goto out_free_mac;
+
+ memcpy(eth_dev->data->mac_addrs[0].addr_bytes,
+ req.ifr_addr.sa_data, ETHER_ADDR_LEN);
+
+ eth_dev->data->kdrv = RTE_KDRV_NONE;
+ eth_dev->data->dev_private = priv;
+ eth_dev->device = &vdev->device;
+ eth_dev->dev_ops = &mvneta_ops;
+
+ return 0;
+out_free_mac:
+ rte_free(eth_dev->data->mac_addrs);
+out_free_priv:
+ rte_free(priv);
+out_free_dev:
+ rte_eth_dev_release_port(eth_dev);
+
+ return ret;
+}
+
+/**
+ * Cleanup previously created device representing Ethernet port.
+ *
+ * @param eth_dev
+ * Pointer to the corresponding rte_eth_dev structure.
+ */
+static void
+mvneta_eth_dev_destroy(struct rte_eth_dev *eth_dev)
+{
+ rte_free(eth_dev->data->dev_private);
+ rte_free(eth_dev->data->mac_addrs);
+ rte_eth_dev_release_port(eth_dev);
+}
+
+/**
+ * Cleanup previously created device representing Ethernet port.
+ *
+ * @param name
+ * Pointer to the port name.
+ */
+static void
+mvneta_eth_dev_destroy_name(const char *name)
+{
+ struct rte_eth_dev *eth_dev;
+
+ eth_dev = rte_eth_dev_allocated(name);
+ if (!eth_dev)
+ return;
+
+ mvneta_eth_dev_destroy(eth_dev);
+}
+
+/**
+ * DPDK callback to register the virtual device.
+ *
+ * @param vdev
+ * Pointer to the virtual device.
+ *
+ * @return
+ * 0 on success, negative error value otherwise.
+ */
+static int
+rte_pmd_mvneta_probe(struct rte_vdev_device *vdev)
+{
+ struct rte_kvargs *kvlist;
+ struct mvneta_ifnames ifnames;
+ int ret = -EINVAL;
+ uint32_t i, ifnum;
+ const char *params;
+
+ params = rte_vdev_device_args(vdev);
+ if (!params)
+ return -EINVAL;
+
+ kvlist = rte_kvargs_parse(params, valid_args);
+ if (!kvlist)
+ return -EINVAL;
+
+ ifnum = rte_kvargs_count(kvlist, MVNETA_IFACE_NAME_ARG);
+ if (ifnum > RTE_DIM(ifnames.names))
+ goto out_free_kvlist;
+
+ ifnames.idx = 0;
+ rte_kvargs_process(kvlist, MVNETA_IFACE_NAME_ARG,
+ mvneta_ifnames_get, &ifnames);
+
+ /*
+ * The below system initialization should be done only once,
+ * on the first provided configuration file
+ */
+ if (mvneta_dev_num)
+ goto init_devices;
+
+ MVNETA_LOG(INFO, "Perform MUSDK initializations");
+
+ ret = rte_mvep_init(MVEP_MOD_T_NETA, kvlist);
+ if (ret)
+ goto out_free_kvlist;
+
+ ret = mvneta_neta_init();
+ if (ret) {
+ MVNETA_LOG(ERR, "Failed to init NETA!");
+ rte_mvep_deinit(MVEP_MOD_T_NETA);
+ goto out_free_kvlist;
+ }
+
+ mvneta_lcore_first = RTE_MAX_LCORE;
+ mvneta_lcore_last = 0;
+
+init_devices:
+ for (i = 0; i < ifnum; i++) {
+ MVNETA_LOG(INFO, "Creating %s", ifnames.names[i]);
+ ret = mvneta_eth_dev_create(vdev, ifnames.names[i]);
+ if (ret)
+ goto out_cleanup;
+ }
+ mvneta_dev_num += ifnum;
+
+ rte_kvargs_free(kvlist);
+
+ return 0;
+out_cleanup:
+ for (; i > 0; i--)
+ mvneta_eth_dev_destroy_name(ifnames.names[i]);
+
+ if (mvneta_dev_num == 0) {
+ mvneta_neta_deinit();
+ rte_mvep_deinit(MVEP_MOD_T_NETA);
+ }
+out_free_kvlist:
+ rte_kvargs_free(kvlist);
+
+ return ret;
+}
+
+/**
+ * DPDK callback to remove virtual device.
+ *
+ * @param vdev
+ * Pointer to the removed virtual device.
+ *
+ * @return
+ * 0 on success, negative error value otherwise.
+ */
+static int
+rte_pmd_mvneta_remove(struct rte_vdev_device *vdev)
+{
+ int i;
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (!name)
+ return -EINVAL;
+
+ MVNETA_LOG(INFO, "Removing %s", name);
+
+ RTE_ETH_FOREACH_DEV(i) {
+ if (rte_eth_devices[i].device != &vdev->device)
+ continue;
+
+ mvneta_eth_dev_destroy(&rte_eth_devices[i]);
+ mvneta_dev_num--;
+ }
+
+ if (mvneta_dev_num == 0) {
+ MVNETA_LOG(INFO, "Perform MUSDK deinit");
+ mvneta_neta_deinit();
+ rte_mvep_deinit(MVEP_MOD_T_NETA);
+ }
+
+ return 0;
+}
+
+static struct rte_vdev_driver pmd_mvneta_drv = {
+ .probe = rte_pmd_mvneta_probe,
+ .remove = rte_pmd_mvneta_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(net_mvneta, pmd_mvneta_drv);
+
+RTE_INIT(mvneta_init_log)
+{
+ mvneta_logtype = rte_log_register("pmd.net.mvneta");
+ if (mvneta_logtype >= 0)
+ rte_log_set_level(mvneta_logtype, RTE_LOG_NOTICE);
+}
new file mode 100644
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Marvell International Ltd.
+ * Copyright(c) 2018 Semihalf.
+ * All rights reserved.
+ */
+
+#ifndef _MVNETA_ETHDEV_H_
+#define _MVNETA_ETHDEV_H_
+
+/*
+ * container_of is defined by both DPDK and MUSDK,
+ * we'll declare only one version.
+ *
+ * Note that it is not used in this PMD anyway.
+ */
+#ifdef container_of
+#undef container_of
+#endif
+
+#include <drivers/mv_neta.h>
+#include <drivers/mv_neta_ppio.h>
+
+/** Packet offset inside RX buffer. */
+#define MRVL_NETA_PKT_OFFS 64
+
+/** Maximum number of rx/tx queues per port */
+#define MRVL_NETA_RXQ_MAX 8
+#define MRVL_NETA_TXQ_MAX 8
+
+/** Minimum/maximum number of descriptors in tx queue */
+#define MRVL_NETA_TXD_MIN 16
+#define MRVL_NETA_TXD_MAX 2048
+
+/** Tx queue descriptors alignment in B */
+#define MRVL_NETA_TXD_ALIGN 32
+
+/** Minimum/maximum number of descriptors in rx queue */
+#define MRVL_NETA_RXD_MIN 16
+#define MRVL_NETA_RXD_MAX 2048
+
+/** Rx queue descriptors alignment in B */
+#define MRVL_NETA_RXD_ALIGN 32
+
+#define MRVL_NETA_VLAN_TAG_LEN 4
+#define MRVL_NETA_ETH_HDRS_LEN (ETHER_HDR_LEN + ETHER_CRC_LEN + \
+ MRVL_NETA_VLAN_TAG_LEN)
+
+#define MRVL_NETA_HDRS_LEN (MV_MH_SIZE + MRVL_NETA_ETH_HDRS_LEN)
+#define MRVL_NETA_MTU_TO_MRU(mtu) ((mtu) + MRVL_NETA_HDRS_LEN)
+#define MRVL_NETA_MRU_TO_MTU(mru) ((mru) - MRVL_NETA_HDRS_LEN)
+
+
+struct mvneta_priv {
+ /* Hot fields, used in fast path. */
+ struct neta_ppio *ppio; /**< Port handler pointer */
+
+ uint8_t pp_id;
+ uint8_t ppio_id; /* ppio port id */
+ uint8_t uc_mc_flushed;
+ uint8_t multiseg;
+
+ struct neta_ppio_params ppio_params;
+ uint16_t nb_rx_queues;
+
+ uint64_t rate_max;
+};
+
+/** Current log type. */
+extern int mvneta_logtype;
+
+#define MVNETA_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, mvneta_logtype, "%s(): " fmt "\n", \
+ __func__, ##args)
+
+#endif /* _MVNETA_ETHDEV_H_ */
new file mode 100644
@@ -0,0 +1,3 @@
+DPDK_18.11 {
+ local: *;
+};
@@ -98,7 +98,9 @@ ifeq ($(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF)$(CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOO
_LDLIBS-y += -lrte_common_octeontx
endif
-ifeq ($(CONFIG_RTE_LIBRTE_MVPP2_PMD),y)
+MVEP-y := $(CONFIG_RTE_LIBRTE_MVPP2_PMD)
+MVEP-y += $(CONFIG_RTE_LIBRTE_MVNETA_PMD)
+ifneq (,$(findstring y,$(MVEP-y)))
_LDLIBS-y += -lrte_common_mvep -L$(LIBMUSDK_PATH)/lib -lmusdk
endif
@@ -157,7 +159,8 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -ldl -lmnl
else
_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -libverbs -lmlx5 -lmnl
endif
-_LDLIBS-$(CONFIG_RTE_LIBRTE_MVPP2_PMD) += -lrte_pmd_mvpp2 -L$(LIBMUSDK_PATH)/lib -lmusdk
+_LDLIBS-$(CONFIG_RTE_LIBRTE_MVPP2_PMD) += -lrte_pmd_mvpp2
+_LDLIBS-$(CONFIG_RTE_LIBRTE_MVNETA_PMD) += -lrte_pmd_mvneta
_LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += -lrte_pmd_nfp
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += -lrte_pmd_null
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP) += -lrte_pmd_pcap -lpcap