[dpdk-dev,v2] app/testpmd: print Rx/Tx offload values
Checks
Commit Message
Which per port offloads are enabled is not clear. Printing offloads
values at forwarding start.
CRC strip offload value was printed in more verbose manner, it is
removed since Rx/Tx offload values covers it and printing only CRC one
can cause confusion.
Hexadecimal offloads values are not very user friendly but preferred to
not create to much noise during forwarding start.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
Cc: Shahaf Shuler <shahafs@mellanox.com>
Cc: Yongseok Koh <yskoh@mellanox.com>
v2:
* Add Rxq and Txq stats too
* Split Rx an Tx related logs and place them related group
---
app/test-pmd/config.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
Comments
> On Mar 12, 2018, at 8:05 AM, Ferruh Yigit <ferruh.yigit@intel.com> wrote:
>
> Which per port offloads are enabled is not clear. Printing offloads
> values at forwarding start.
>
> CRC strip offload value was printed in more verbose manner, it is
> removed since Rx/Tx offload values covers it and printing only CRC one
> can cause confusion.
>
> Hexadecimal offloads values are not very user friendly but preferred to
> not create to much noise during forwarding start.
>
> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
> ---
> Cc: Shahaf Shuler <shahafs@mellanox.com>
> Cc: Yongseok Koh <yskoh@mellanox.com>
>
> v2:
> * Add Rxq and Txq stats too
> * Split Rx an Tx related logs and place them related group
> ---
> app/test-pmd/config.c | 13 +++++++------
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> index 4bb255c62..6249b19bb 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -1682,10 +1682,6 @@ rxtx_config_display(void)
> struct rte_eth_txconf *tx_conf = &ports[pid].tx_conf;
>
> printf(" port %d:\n", (unsigned int)pid);
> - printf(" CRC stripping %s\n",
> - (ports[pid].dev_conf.rxmode.offloads &
> - DEV_RX_OFFLOAD_CRC_STRIP) ?
> - "enabled" : "disabled");
> printf(" RX queues=%d - RX desc=%d - RX free threshold=%d\n",
> nb_rxq, nb_rxd, rx_conf->rx_free_thresh);
> printf(" RX threshold registers: pthresh=%d hthresh=%d "
> @@ -1693,6 +1689,9 @@ rxtx_config_display(void)
> rx_conf->rx_thresh.pthresh,
> rx_conf->rx_thresh.hthresh,
> rx_conf->rx_thresh.wthresh);
> + printf(" Rx offloads=0x%"PRIx64" RXQ Offloads=0x%"PRIx64"\n",
> + ports[pid].dev_conf.rxmode.offloads,
> + rx_conf->offloads);
> printf(" TX queues=%d - TX desc=%d - TX free threshold=%d\n",
> nb_txq, nb_txd, tx_conf->tx_free_thresh);
> printf(" TX threshold registers: pthresh=%d hthresh=%d "
> @@ -1700,8 +1699,10 @@ rxtx_config_display(void)
> tx_conf->tx_thresh.pthresh,
> tx_conf->tx_thresh.hthresh,
> tx_conf->tx_thresh.wthresh);
> - printf(" TX RS bit threshold=%d - TXQ offloads=0x%"PRIx64"\n",
> - tx_conf->tx_rs_thresh, tx_conf->offloads);
> + printf(" TX RS bit threshold=%d\n", tx_conf->tx_rs_thresh);
> + printf(" Tx Offloads=0x%"PRIx64" TXQ offloads=0x%"PRIx64"\n",
Small comment. It would be better to be consistent between "Offloads" and "offloads"
for Rx and Tx. :-)
Other than that,
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Thanks
On 3/12/2018 5:26 PM, Yongseok Koh wrote:
>
>> On Mar 12, 2018, at 8:05 AM, Ferruh Yigit <ferruh.yigit@intel.com> wrote:
>>
>> Which per port offloads are enabled is not clear. Printing offloads
>> values at forwarding start.
>>
>> CRC strip offload value was printed in more verbose manner, it is
>> removed since Rx/Tx offload values covers it and printing only CRC one
>> can cause confusion.
>>
>> Hexadecimal offloads values are not very user friendly but preferred to
>> not create to much noise during forwarding start.
>>
>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
>> ---
>> Cc: Shahaf Shuler <shahafs@mellanox.com>
>> Cc: Yongseok Koh <yskoh@mellanox.com>
>>
>> v2:
>> * Add Rxq and Txq stats too
>> * Split Rx an Tx related logs and place them related group
>> ---
>> app/test-pmd/config.c | 13 +++++++------
>> 1 file changed, 7 insertions(+), 6 deletions(-)
>>
>> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
>> index 4bb255c62..6249b19bb 100644
>> --- a/app/test-pmd/config.c
>> +++ b/app/test-pmd/config.c
>> @@ -1682,10 +1682,6 @@ rxtx_config_display(void)
>> struct rte_eth_txconf *tx_conf = &ports[pid].tx_conf;
>>
>> printf(" port %d:\n", (unsigned int)pid);
>> - printf(" CRC stripping %s\n",
>> - (ports[pid].dev_conf.rxmode.offloads &
>> - DEV_RX_OFFLOAD_CRC_STRIP) ?
>> - "enabled" : "disabled");
>> printf(" RX queues=%d - RX desc=%d - RX free threshold=%d\n",
>> nb_rxq, nb_rxd, rx_conf->rx_free_thresh);
>> printf(" RX threshold registers: pthresh=%d hthresh=%d "
>> @@ -1693,6 +1689,9 @@ rxtx_config_display(void)
>> rx_conf->rx_thresh.pthresh,
>> rx_conf->rx_thresh.hthresh,
>> rx_conf->rx_thresh.wthresh);
>> + printf(" Rx offloads=0x%"PRIx64" RXQ Offloads=0x%"PRIx64"\n",
>> + ports[pid].dev_conf.rxmode.offloads,
>> + rx_conf->offloads);
>> printf(" TX queues=%d - TX desc=%d - TX free threshold=%d\n",
>> nb_txq, nb_txd, tx_conf->tx_free_thresh);
>> printf(" TX threshold registers: pthresh=%d hthresh=%d "
>> @@ -1700,8 +1699,10 @@ rxtx_config_display(void)
>> tx_conf->tx_thresh.pthresh,
>> tx_conf->tx_thresh.hthresh,
>> tx_conf->tx_thresh.wthresh);
>> - printf(" TX RS bit threshold=%d - TXQ offloads=0x%"PRIx64"\n",
>> - tx_conf->tx_rs_thresh, tx_conf->offloads);
>> + printf(" TX RS bit threshold=%d\n", tx_conf->tx_rs_thresh);
>> + printf(" Tx Offloads=0x%"PRIx64" TXQ offloads=0x%"PRIx64"\n",
>
> Small comment. It would be better to be consistent between "Offloads" and "offloads"
> for Rx and Tx. :-)
Right :) I will send a new version.
>
> Other than that,
>
> Acked-by: Yongseok Koh <yskoh@mellanox.com>
> Thanks
>
@@ -1682,10 +1682,6 @@ rxtx_config_display(void)
struct rte_eth_txconf *tx_conf = &ports[pid].tx_conf;
printf(" port %d:\n", (unsigned int)pid);
- printf(" CRC stripping %s\n",
- (ports[pid].dev_conf.rxmode.offloads &
- DEV_RX_OFFLOAD_CRC_STRIP) ?
- "enabled" : "disabled");
printf(" RX queues=%d - RX desc=%d - RX free threshold=%d\n",
nb_rxq, nb_rxd, rx_conf->rx_free_thresh);
printf(" RX threshold registers: pthresh=%d hthresh=%d "
@@ -1693,6 +1689,9 @@ rxtx_config_display(void)
rx_conf->rx_thresh.pthresh,
rx_conf->rx_thresh.hthresh,
rx_conf->rx_thresh.wthresh);
+ printf(" Rx offloads=0x%"PRIx64" RXQ Offloads=0x%"PRIx64"\n",
+ ports[pid].dev_conf.rxmode.offloads,
+ rx_conf->offloads);
printf(" TX queues=%d - TX desc=%d - TX free threshold=%d\n",
nb_txq, nb_txd, tx_conf->tx_free_thresh);
printf(" TX threshold registers: pthresh=%d hthresh=%d "
@@ -1700,8 +1699,10 @@ rxtx_config_display(void)
tx_conf->tx_thresh.pthresh,
tx_conf->tx_thresh.hthresh,
tx_conf->tx_thresh.wthresh);
- printf(" TX RS bit threshold=%d - TXQ offloads=0x%"PRIx64"\n",
- tx_conf->tx_rs_thresh, tx_conf->offloads);
+ printf(" TX RS bit threshold=%d\n", tx_conf->tx_rs_thresh);
+ printf(" Tx Offloads=0x%"PRIx64" TXQ offloads=0x%"PRIx64"\n",
+ ports[pid].dev_conf.txmode.offloads,
+ tx_conf->offloads);
}
}