[3/4] net/mlx5: fix secondary process attach port Tx queue
Checks
Commit Message
Currently, the secondary process port UAR register mapping used by Tx
queue is done during port initializing.
Unluckily, in port hot-plug case, the secondary process was requested
to initialize the port when primary process did not complete the
device configuration and the port Tx queue number is not configured
yet. Hence, the secondary process getS the zero Tx queue number during
probing, causing the UAR registers not be mapped in the correct
fashion.
This commit checks the configured number of Tx queues in secondary
process when the port start is requested. In case the Tx queue
number mismatch found the UAR mapping is reinitialized accordingly.
Fixes: 2aac5b5d119f ("net/mlx5: sync stop/start with secondary process")
cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
---
drivers/net/mlx5/linux/mlx5_mp_os.c | 19 +++++++++++++++++++
drivers/net/mlx5/mlx5.c | 2 +-
drivers/net/mlx5/mlx5.h | 6 +++++-
3 files changed, 25 insertions(+), 2 deletions(-)
Comments
Hi,
> -----Original Message-----
> From: Suanming Mou <suanmingm@nvidia.com>
> Sent: Sunday, January 24, 2021 1:02 PM
> To: Slava Ovsiienko <viacheslavo@nvidia.com>; Matan Azrad
> <matan@nvidia.com>
> Cc: Raslan Darawsheh <rasland@nvidia.com>; dev@dpdk.org;
> stable@dpdk.org
> Subject: [PATCH 3/4] net/mlx5: fix secondary process attach port Tx queue
>
> Currently, the secondary process port UAR register mapping used by Tx
> queue is done during port initializing.
>
> Unluckily, in port hot-plug case, the secondary process was requested
> to initialize the port when primary process did not complete the
> device configuration and the port Tx queue number is not configured
> yet. Hence, the secondary process getS the zero Tx queue number during
> probing, causing the UAR registers not be mapped in the correct
> fashion.
>
> This commit checks the configured number of Tx queues in secondary
> process when the port start is requested. In case the Tx queue
> number mismatch found the UAR mapping is reinitialized accordingly.
>
> Fixes: 2aac5b5d119f ("net/mlx5: sync stop/start with secondary process")
> cc: stable@dpdk.org
>
> Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
> Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
> ---
> drivers/net/mlx5/linux/mlx5_mp_os.c | 19 +++++++++++++++++++
> drivers/net/mlx5/mlx5.c | 2 +-
> drivers/net/mlx5/mlx5.h | 6 +++++-
> 3 files changed, 25 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/mlx5/linux/mlx5_mp_os.c
> b/drivers/net/mlx5/linux/mlx5_mp_os.c
> index 08ade75..95372e2 100644
> --- a/drivers/net/mlx5/linux/mlx5_mp_os.c
> +++ b/drivers/net/mlx5/linux/mlx5_mp_os.c
[...]
>
> -/* Per-process private structure. */
> +/*
> + * Per-process private structure.
> + * Caution, secondary pocess may rebuid the struct during port start.
> + */
Typo in
pocess-> process
rebuid-> rebuild
will fix during integration.
[...]
> 1.8.3.1
Kindest regards
Raslan Darawsheh
@@ -115,6 +115,7 @@
const struct mlx5_mp_param *param =
(const struct mlx5_mp_param *)mp_msg->param;
struct rte_eth_dev *dev;
+ struct mlx5_proc_priv *ppriv;
struct mlx5_priv *priv;
int ret;
@@ -132,6 +133,20 @@
rte_mb();
dev->rx_pkt_burst = mlx5_select_rx_function(dev);
dev->tx_pkt_burst = mlx5_select_tx_function(dev);
+ ppriv = (struct mlx5_proc_priv *)dev->process_private;
+ /* If Tx queue number changes, re-initialize UAR. */
+ if (ppriv->uar_table_sz != priv->txqs_n) {
+ mlx5_tx_uar_uninit_secondary(dev);
+ mlx5_proc_priv_uninit(dev);
+ ret = mlx5_proc_priv_init(dev);
+ if (ret)
+ return -rte_errno;
+ ret = mlx5_tx_uar_init_secondary(dev, mp_msg->fds[0]);
+ if (ret) {
+ mlx5_proc_priv_uninit(dev);
+ return -rte_errno;
+ }
+ }
mp_init_msg(&priv->mp_id, &mp_res, param->type);
res->result = 0;
ret = rte_mp_reply(&mp_res, peer);
@@ -183,6 +198,10 @@
return;
}
mp_init_msg(&priv->mp_id, &mp_req, type);
+ if (type == MLX5_MP_REQ_START_RXTX) {
+ mp_req.num_fds = 1;
+ mp_req.fds[0] = ((struct ibv_context *)priv->sh->ctx)->cmd_fd;
+ }
ret = rte_mp_request_sync(&mp_req, &mp_rep, &ts);
if (ret) {
if (rte_errno != ENOTSUP)
@@ -1268,7 +1268,7 @@ struct mlx5_dev_ctx_shared *
* @param dev
* Pointer to Ethernet device structure.
*/
-static void
+void
mlx5_proc_priv_uninit(struct rte_eth_dev *dev)
{
if (!dev->process_private)
@@ -743,7 +743,10 @@ struct mlx5_dev_ctx_shared {
struct mlx5_dev_shared_port port[]; /* per device port data array. */
};
-/* Per-process private structure. */
+/*
+ * Per-process private structure.
+ * Caution, secondary pocess may rebuid the struct during port start.
+ */
struct mlx5_proc_priv {
size_t uar_table_sz;
/* Size of UAR register table. */
@@ -998,6 +1001,7 @@ struct rte_hairpin_peer_info {
int mlx5_getenv_int(const char *);
int mlx5_proc_priv_init(struct rte_eth_dev *dev);
+void mlx5_proc_priv_uninit(struct rte_eth_dev *dev);
int mlx5_udp_tunnel_port_add(struct rte_eth_dev *dev,
struct rte_eth_udp_tunnel *udp_tunnel);
uint16_t mlx5_eth_find_next(uint16_t port_id, struct rte_pci_device *pci_dev);