mbox series

[v5,00/12] enable DCF datapath configuration

Message ID 20200623023838.5608-1-ting.xu@intel.com (mailing list archive)
Headers
Series enable DCF datapath configuration |

Message

Xu, Ting June 23, 2020, 2:38 a.m. UTC
  This patchset adds support to configure DCF datapath, including
Rx/Tx queues setup, start and stop, device configuration, RSS
and flexible descriptor RXDID initialization and MAC filter setup.

Qi Zhang (11):
  net/ice: init RSS and supported RXDID in DCF
  net/ice: complete device info get in DCF
  net/ice: complete dev configure in DCF
  net/ice: complete queue setup in DCF
  net/ice: add stop flag for device start / stop
  net/ice: add Rx queue init in DCF
  net/ice: init RSS during DCF start
  net/ice: add queue config in DCF
  net/ice: add queue start and stop for DCF
  net/ice: enable stats for DCF
  net/ice: set MAC filter during dev start for DCF

Ting Xu (1):
  doc: enable DCF datapath configuration

---
v4->v5:
Add driver's feature doc

v3->v4:
Clean codes based on comments

v2->v3:
Correct coding style issue

v1->v2:
Optimize coding style
Correct some return values
Add support to stop started queues when queue start failed

 doc/guides/nics/features/ice_dcf.ini   |  19 +
 doc/guides/rel_notes/release_20_08.rst |   6 +
 drivers/net/ice/ice_dcf.c              | 408 ++++++++++++-
 drivers/net/ice/ice_dcf.h              |  17 +
 drivers/net/ice/ice_dcf_ethdev.c       | 773 +++++++++++++++++++++++--
 drivers/net/ice/ice_dcf_ethdev.h       |   3 -
 drivers/net/ice/ice_dcf_parent.c       |   8 +
 7 files changed, 1181 insertions(+), 53 deletions(-)
 create mode 100644 doc/guides/nics/features/ice_dcf.ini
  

Comments

Qiming Yang June 29, 2020, 2:43 a.m. UTC | #1
Reviewed-by: Qiming Yang <qiming.yang@intel.com>

> -----Original Message-----
> From: Xu, Ting <ting.xu@intel.com>
> Sent: Tuesday, June 23, 2020 10:38
> To: dev@dpdk.org
> Cc: Zhang, Qi Z <qi.z.zhang@intel.com>; Yang, Qiming
> <qiming.yang@intel.com>; Wu, Jingjing <jingjing.wu@intel.com>; Xing, Beilei
> <beilei.xing@intel.com>; Kovacevic, Marko <marko.kovacevic@intel.com>;
> Mcnamara, John <john.mcnamara@intel.com>; Xu, Ting <ting.xu@intel.com>
> Subject: [PATCH v5 00/12] enable DCF datapath configuration
> 
> This patchset adds support to configure DCF datapath, including Rx/Tx
> queues setup, start and stop, device configuration, RSS and flexible
> descriptor RXDID initialization and MAC filter setup.
> 
> Qi Zhang (11):
>   net/ice: init RSS and supported RXDID in DCF
>   net/ice: complete device info get in DCF
>   net/ice: complete dev configure in DCF
>   net/ice: complete queue setup in DCF
>   net/ice: add stop flag for device start / stop
>   net/ice: add Rx queue init in DCF
>   net/ice: init RSS during DCF start
>   net/ice: add queue config in DCF
>   net/ice: add queue start and stop for DCF
>   net/ice: enable stats for DCF
>   net/ice: set MAC filter during dev start for DCF
> 
> Ting Xu (1):
>   doc: enable DCF datapath configuration
> 
> ---
> v4->v5:
> Add driver's feature doc
> 
> v3->v4:
> Clean codes based on comments
> 
> v2->v3:
> Correct coding style issue
> 
> v1->v2:
> Optimize coding style
> Correct some return values
> Add support to stop started queues when queue start failed
> 
>  doc/guides/nics/features/ice_dcf.ini   |  19 +
>  doc/guides/rel_notes/release_20_08.rst |   6 +
>  drivers/net/ice/ice_dcf.c              | 408 ++++++++++++-
>  drivers/net/ice/ice_dcf.h              |  17 +
>  drivers/net/ice/ice_dcf_ethdev.c       | 773 +++++++++++++++++++++++--
>  drivers/net/ice/ice_dcf_ethdev.h       |   3 -
>  drivers/net/ice/ice_dcf_parent.c       |   8 +
>  7 files changed, 1181 insertions(+), 53 deletions(-)  create mode 100644
> doc/guides/nics/features/ice_dcf.ini
> 
> --
> 2.17.1
  
Qi Zhang June 29, 2020, 5:36 a.m. UTC | #2
> -----Original Message-----
> From: Yang, Qiming <qiming.yang@intel.com>
> Sent: Monday, June 29, 2020 10:44 AM
> To: Xu, Ting <ting.xu@intel.com>; dev@dpdk.org
> Cc: Zhang, Qi Z <qi.z.zhang@intel.com>; Wu, Jingjing <jingjing.wu@intel.com>;
> Xing, Beilei <beilei.xing@intel.com>; Kovacevic, Marko
> <marko.kovacevic@intel.com>; Mcnamara, John <john.mcnamara@intel.com>
> Subject: RE: [PATCH v5 00/12] enable DCF datapath configuration
> 
> Reviewed-by: Qiming Yang <qiming.yang@intel.com>

Applied to dpdk-next-net-intel.

Thanks
Qi
> 
> > -----Original Message-----
> > From: Xu, Ting <ting.xu@intel.com>
> > Sent: Tuesday, June 23, 2020 10:38
> > To: dev@dpdk.org
> > Cc: Zhang, Qi Z <qi.z.zhang@intel.com>; Yang, Qiming
> > <qiming.yang@intel.com>; Wu, Jingjing <jingjing.wu@intel.com>; Xing,
> > Beilei <beilei.xing@intel.com>; Kovacevic, Marko
> > <marko.kovacevic@intel.com>; Mcnamara, John
> <john.mcnamara@intel.com>;
> > Xu, Ting <ting.xu@intel.com>
> > Subject: [PATCH v5 00/12] enable DCF datapath configuration
> >
> > This patchset adds support to configure DCF datapath, including Rx/Tx
> > queues setup, start and stop, device configuration, RSS and flexible
> > descriptor RXDID initialization and MAC filter setup.
> >
> > Qi Zhang (11):
> >   net/ice: init RSS and supported RXDID in DCF
> >   net/ice: complete device info get in DCF
> >   net/ice: complete dev configure in DCF
> >   net/ice: complete queue setup in DCF
> >   net/ice: add stop flag for device start / stop
> >   net/ice: add Rx queue init in DCF
> >   net/ice: init RSS during DCF start
> >   net/ice: add queue config in DCF
> >   net/ice: add queue start and stop for DCF
> >   net/ice: enable stats for DCF
> >   net/ice: set MAC filter during dev start for DCF
> >
> > Ting Xu (1):
> >   doc: enable DCF datapath configuration
> >
> > ---
> > v4->v5:
> > Add driver's feature doc
> >
> > v3->v4:
> > Clean codes based on comments
> >
> > v2->v3:
> > Correct coding style issue
> >
> > v1->v2:
> > Optimize coding style
> > Correct some return values
> > Add support to stop started queues when queue start failed
> >
> >  doc/guides/nics/features/ice_dcf.ini   |  19 +
> >  doc/guides/rel_notes/release_20_08.rst |   6 +
> >  drivers/net/ice/ice_dcf.c              | 408 ++++++++++++-
> >  drivers/net/ice/ice_dcf.h              |  17 +
> >  drivers/net/ice/ice_dcf_ethdev.c       | 773 +++++++++++++++++++++++--
> >  drivers/net/ice/ice_dcf_ethdev.h       |   3 -
> >  drivers/net/ice/ice_dcf_parent.c       |   8 +
> >  7 files changed, 1181 insertions(+), 53 deletions(-)  create mode
> > 100644 doc/guides/nics/features/ice_dcf.ini
> >
> > --
> > 2.17.1
>