doc: thunderx: explain which PCI is secondary VF
Checks
Commit Message
From: Krzysztof Kanas <kkanas@marvell.com>
Thunderx-nic uses secondary VF's to provide more queues to DPDK.
Current instructions explain the concept but don't show easy way to find
which PCI id is primary and which is secondary VF's.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
---
doc/guides/nics/thunderx.rst | 48 ++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
Comments
On Tue, Jan 28, 2020 at 7:01 PM <kkanas@marvell.com> wrote:
>
> From: Krzysztof Kanas <kkanas@marvell.com>
>
> Thunderx-nic uses secondary VF's to provide more queues to DPDK.
> Current instructions explain the concept but don't show easy way to find
> which PCI id is primary and which is secondary VF's.
>
> Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
> ---
> doc/guides/nics/thunderx.rst | 48 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
1) Fixed the following warning
- dpdk-next-net-mrvl/doc/guides/nics/thunderx.rst:321: WARNING:
Explicit markup ends without a blank line; unexpected unindent.
2) Slightly reworded the git commit message.
doc/thunderx: add secondary VF enumeration details
thunderx-nic uses secondary VF's to provide more queues to DPDK.
Current instructions explain the concept but don't show an easy way to find
which PCI id is primary and which is secondary VF's.
This patch extending the documentation of secondary VF w.r.t
the enumeration details.
Acked-by: Jerin Jacob <jerinj@marvell.com>
Applied to dpdk-next-net-mrvl/master. Thanks
@@ -313,6 +313,54 @@ We will choose four secondary queue sets from the ending of the list (0002:01:01
The nicvf thunderx driver will make use of attached secondary VFs automatically during the interface configuration stage.
+driver thunder-nic VF's
+~~~~~~~~~~~~~~~~~~~~~~~
+
+To distinguish thunder-nic primary VFs and secondary VFs you can use sysfs
+ .. code-block:: console
+ ll /sys/bus/pci/drivers/thunder-nic/
+ total 0
+ drwxr-xr-x 2 root root 0 Jan 22 11:19 ./
+ drwxr-xr-x 86 root root 0 Jan 22 11:07 ../
+ lrwxrwxrwx 1 root root 0 Jan 22 11:19 0001:01:00.0 -> '../../../../devices/platform/soc@0/849000000000.pci/pci0001:00/0001:00:10.0/0001:01:00.0'/
+
+ cat /sys/bus/pci/drivers/thunder-nic/0001\:01\:00.0/sriov_sqs_assignment
+ 12
+ 0 0001:01:00.1 vfio-pci +: 12 13
+ 1 0001:01:00.2 thunder-nicvf -:
+ 2 0001:01:00.3 thunder-nicvf -:
+ 3 0001:01:00.4 thunder-nicvf -:
+ 4 0001:01:00.5 thunder-nicvf -:
+ 5 0001:01:00.6 thunder-nicvf -:
+ 6 0001:01:00.7 thunder-nicvf -:
+ 7 0001:01:01.0 thunder-nicvf -:
+ 8 0001:01:01.1 thunder-nicvf -:
+ 9 0001:01:01.2 thunder-nicvf -:
+ 10 0001:01:01.3 thunder-nicvf -:
+ 11 0001:01:01.4 thunder-nicvf -:
+ 12 0001:01:01.5 vfio-pci: 0
+ 13 0001:01:01.6 vfio-pci: 0
+ 14 0001:01:01.7 thunder-nicvf: 255
+ 15 0001:01:02.0 thunder-nicvf: 255
+ 16 0001:01:02.1 thunder-nicvf: 255
+ 17 0001:01:02.2 thunder-nicvf: 255
+ 18 0001:01:02.3 thunder-nicvf: 255
+ 19 0001:01:02.4 thunder-nicvf: 255
+ 20 0001:01:02.5 thunder-nicvf: 255
+ 21 0001:01:02.6 thunder-nicvf: 255
+ 22 0001:01:02.7 thunder-nicvf: 255
+ 23 0001:01:03.0 thunder-nicvf: 255
+ 24 0001:01:03.1 thunder-nicvf: 255
+ 25 0001:01:03.2 thunder-nicvf: 255
+ 26 0001:01:03.3 thunder-nicvf: 255
+ 27 0001:01:03.4 thunder-nicvf: 255
+ 28 0001:01:03.5 thunder-nicvf: 255
+ 29 0001:01:03.6 thunder-nicvf: 255
+ 30 0001:01:03.7 thunder-nicvf: 255
+ 31 0001:01:04.0 thunder-nicvf: 255
+
+Every column that ends with 'thunder-nicvf: number' can be used as secondary VF.
+In printout above all entres after '14 0001:01:01.7 thunder-nicvf: 255' can be used as secondary VF.
Module params
--------------